Development of modular roll service concepts

The goal of this study was to find and develop new or improved service concepts for rolls in a paper machine and secondary targets were to find out what the KPIs and values of the concepts are. Two methodologies were utilized in researching this problem; firstly sales personnel were interviewed about customer values and KPIs and a questionnaire about service modules were sent out to four BSI (basic sales item) responsible persons. Throughout the research process differences in geographic regions were identified and several customer KPIs and values were discovered. The interviews showed that the main concern for customers is the cost of operations. The goal is to produce the same or in some cases more tons with smaller operating costs. The questionnaire standardized the data about service modules and made it possible to link these values, KPIs and concerns of customers to Valmet’s service offering. Eventually these service modules were used to create a service concepts that offer flexibility, cost savings, safety and peace of mind for the customers. With this new conceptual approach Valmet can more flexibly answer to customer quotations and modify the offering to better generate customer value and customer satisfaction. In addition a new BSI was defined and proposed for pilot projects.

Development of laboratory exercises for basic nuclear thermal hydraulics measurements

The thesis focuses on light water reactors (pressurized water reactors, boiling water reactors) and measurement techniques for basic thermal hydraulics parameters that are used in a nuclear power plant. The goal of this work is a development of laboratory exercises for basic nuclear thermal hydraulics measurements.

Intelligence in peace support operations

Finnish Defence Studies is published under the auspices of the National Defence College, and the contributions reflect the fields of research and teaching of the College. Finnish Defence Studies will occasionally feature documentation on Finnish Security Policy. Views expressed are those of the authors and do not necessarily imply endorsement by the National Defence College.

Civilian-military cooperation in crisis management operations

Finnish Defence Studies is published under the auspices of the National Defence College, and the contributions reflect the fields of research and teaching of the College. Finnish Defence Studies will occasionally feature documentation on Finnish Security Policy. Views expressed are those of the authors and do not necessarily imply endorsement by the National Defence College.

The Soviet plans for the North Western theatre of operations in 1939-1944

Finnish Defence Studies is published under the auspices of the National Defence College, and the contributions reflect the fields of research and teaching of the College. Finnish Defence Studies will occasionally feature documentation on Finnish Security Policy. Views expressed are those of the authors and do not necessarily imply endorsement by the National Defence College.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.

Development and Effect Analysis of the Asteri Consultative Auditing Process - Safety and Security Management in Educational Institutions

The Finnish legislation requires for a safe and secure learning environment. However, the comprehensive, risk based safety and security management (SSM) and the management commitment in the implementation and development of the SSM are not mentioned in the legislation. Multiple institutions, operators and researchers have studied and developed safety and security in educational institutions over the past decade. Typically the approach has been fragmented and without bringing up the importance of the comprehensive SSM. The development needs of the safety and security operations in universities have been studied. However, in universities of applied sciences (UASs) and in elementary schools (ESs), the performance level, strengths and weaknesses of the comprehensive SSM have not been studied. The objective of this study was to develop the comprehensive, risk based SSM of educational institutions by developing the new Asteri consultative auditing process and study its effects on auditees. Furthermore, the performance level in the comprehensive SSM in UASs and ESs were studied using Asteri and the TUTOR model developed by the Keski-Uusimaa Department for Rescue Services. In addition, strengths, development needs and differences were identified. In total, 76 educational institutions were audited between the years 2011 and 2014. The study is based on logical empiricism, and an observational applied research design was used. Auditing, observation and an electronic survey were used for data collection. Statistical analysis was used to analyze the collected information. In addition, thematic analysis was used to analyze the development areas of the organizations mentioned by the respondents in the survey. As one of the main contributions, this research presents the new Asteri consultative auditing process. Organizations with low performance levels on the audited subject benefit the most from the Asteri consultative auditing process. Asteri may be usable in many different types of audits, not only in SSM audits. As a new result, this study provides new knowledge on attitudes related to auditing. According to the research findings, auditing may generate negative attitudes and the auditor should take them into account when planning and preparing for audits. Negative attitudes can be compensated by producing added value, objectivity and positivity for the audit and, thus, improve the positive effects of auditing on knowledge and skills. Moreover, as the results of this study shows, auditing safety and security issues do not increase feelings of insecurity, but rather increase feelings of safety and security when using the new Asteri consultative auditing process with the TUTOR model. The results showed that the SSM in the audited UASs was statistically significantly more advanced than that in the audited ESs. However, there is still room for improvement in the ESs and the UASs as the approach to the SSM was fragmented. It can be assumed that the majority of Finnish UASs and ESs do not likely meet the basic level of the comprehensive, risk based the SSM.

Voimalaitoksen energiaraportoinnin kehittäminen

Diplomityössä tarkasteltiin Metsä Board Simpeleen voimalaitoksen energiaraportointi kokonaisuutta. Tarkastelun kohteena olivat lämpö-, sähkö- ja polttoaine-energiat. Tarkastelun pääpaino oli energian määritykseen tarvittavissa mittapisteissä sekä niistä muodostuvissa raporteissa. Työn tavoitteena oli saada luotettavat energiaraportit, jotka ovat jaoteltu selkeästi ja johdonmukaisesti. Tavoitteena oli myös vähentää kuukausiraportoinnin muodostamiseen tarvittavaa henkilötyöaikaa. Teoriaosuudessa käsitellään yleisesti voimalaitosprosessin toimintaa sekä siinä käytettäviä polttoaineita. Energiataseen muodostamisen perusteita tarkasteltiin voimalaitosprosessin kannalta. Energian määrityksiin käytettävät prosessimittaukset käytiin läpi. Raportointivelvollisuudet selvitettiin, niin tilastokeskuksien, kuin viranomaistenkin suuntaan. Työosuudessa perehdyttiin käytössä oleviin raportointikäytäntöihin sekä raporttipohjiin. Energialaskentayhtälöt ja parametrit tarkastettiin tarvittavilta osin. Työnaikana havaittiin nopeasti, että raportointi muodostetaan pitkälti Microsoft Excel-taulukkolaskentaohjelmiston avulla. Olemassa olevia automatisoituja raportteja ei hyödynnetty ollenkaan, koska niitä pidettiin epäluotettavina. Työn tuloksena automatisoidut kuukausiraportit tarkastettiin, virheet korjattiin ja ne otettiin käyttöön. Automaattisiin raportteihin tehtiin päivitysehdotukset uusista raporttipohjista. Viralliseen kuukausiraportointiin rakennettiin myös kokonaan uudet raportointipohjat, jotka hyödyntävät automaattisesti muodostuvia raportteja. Uudet raporttipohjat nopeuttivat raportointityötä merkittävästi. Polttoaine-energian hallintajärjestelmä todettiin vanhanaikaiseksi ja sen uusimista suositellaan. Uusinnalla raportointityö helpottuisi ja sen avulla siitä saataisiin kattavampi.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Suomalainen yrityshautomo-konsepti Pietarissa pienen ICT-yrityksen näkökulmasta: tapaustutkimus

Tämän Pro -gradu tutkielman tavoitteena on tutkia suomalaisen yrityshautomo-konseptin soveltuvuutta venäläisten ICT-alan start-up-yrittäjien tarpeisiin. Tutkielma on tehty suomalaiselle pörssiyhtiölle, joka laajentaa toimintaansa Venäjälle perustamalla teknologiakeskuksen Pietariin. Kohdeyritys on teettänyt useita selvi-tyksiä Pietarin ICT-sektorista, sen ongelmista ja kehitystarpeista. Sen sijaan käsitystä ei ole siitä, miten haastavaksi yksittäinen yrittäjä kokee liiketoiminta-ympäristön ja mitä tukipalveluita hän liiketoiminnassaan tarvitsee. Tutkimuksen tavoitteena on vastata näihin kysymyksiin sekä peilata saatuja vastauksia kohdeyrityksen Suomessa tarjoamiin hautomopalveluihin. Kirjallisuuskatsauksessa on käyty läpi yrityshautomotoiminnan historiaa ja toiminnan saamia erilaisia muotoja. Lisäksi on perehdytty tutkimuksiin hautomotoimin-nan vaikuttavuudesta ja kriittisistä menestystekijöistä. Tutkimus on lähestymistavaltaan laadullinen case-tutkimus. Käytännössä työ to-teutettiin kyselytutkimuksena haastattelemalla kymmentä pietarilaista, pienen ICT-alan yrityksen johtajaa. Haastatteluiden perusteella kohdeyrityksen hautomokonseptia ei ole mahdollista siirtää suoraviivaisesti venäläiseen toimintaympäristöön. Kulttuurierot maiden välillä ovat merkittävät, eikä niitä ole lyhyellä tai keskipitkällä aikavälillä mahdollista poistaa. Etenkin yleinen luottamuksen puute vaikeuttaa konseptin implementointia. Alkavien ICT-yritysten haasteet ovat pitkälti samoja rajan kummallakin puolen. Rahoituksen puute ja ongelmat myynti- ja markkinointiosaamisessa tulivat haas-tatteluissa vahvasti esille. Liiketoimintaosaamisessa on paljon parannettavaa. Ensimmäisiä toteutettavaksi suositeltuja palveluita ovat siten yrittäjävalmennus ja myynnin ja markkinoinnin työpaja. Lopuksi voi todeta, että useille kohdeyrityksen tarjoamille yksittäisille palveluille on selkeä tarve. Siihen, mitä käytännössä on mahdollista ja/tai kannattavaa toteuttaa, ei oteta tässä tutkimuksessa kantaa.

Data and Inventory Management in Spare Part Business: Developing Operations in the Case Company

After sales business is an effective way to create profit and increase customer satisfaction in manufacturing companies. Despite this, some special business characteristics that are linked to these functions, make it exceptionally challenging in its own way. This Master’s Thesis examines the current situation of the data and inventory management in the case company regarding possibilities and challenges related to the consolidation of current business operations. The research examines process steps, procedures, data requirements, data mining practices and data storage management of spare part sales process, whereas the part focusing on inventory management is reviewing the current stock value and examining current practices and operational principles. There are two global after sales units which supply spare parts and issues reviewed in this study are examined from both units’ perspective. The analysis is focused on the operations of that unit where functions would be centralized by default, if change decisions are carried out. It was discovered that both data and inventory management include clear shortcomings, which result from lack of internal instructions and established processes as well as lack of cooperation with other stakeholders related to product’s lifecycle. The main product of data management was a guideline for consolidating the functions, tailored for the company’s needs. Additionally, potentially scrapped spare part were listed and a proposal of inventory management instructions was drafted. If the suggested spare part materials will be scrapped, stock value will decrease 46 percent. A guideline which was reviewed and commented in this thesis was chosen as the basis of the inventory management instructions.