Surface irregularity factor as a parameter to evaluate the fatigue damage state of CFRP

This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials. Constant amplitude fatigue loads (CAL) and realistic variable amplitude loads (VAL), representative of real in- flight conditions, have been applied to “dog bone” shaped tensile specimens. It has been shown that the measurement of the surface irregularity parameters can be applied to evaluate the damage state of a structure, and that it is independent of the type of fatigue load that has caused the damage. As a result, this measurement technique is applicable for a wide range of inspections of composite material structures, from pressurized tanks with constant amplitude loads, to variable amplitude loaded aeronautical structures such as wings and empennages, up to automotive and other industrial applications.

Características preferidas por hombres y mujeres que buscan pareja estable de su mismo sexo

Las preferencias en elección de pareja de hombres y mujeres interesados en establecer relaciones a largo plazo con personas de su mismo sexo biológico ha sido un tema de interés para el análisis evolucionista, ya que existe debate frente a los resultados de las investigaciones y los planteamientos de las teorías de inversión parental y estrategias sexuales. Con el objetivo de identificar qué características son preferidas por hombres y mujeres interesados en establecer una relación a largo plazo con personas de su mismo sexo biológico y contribuir a esta discusión, se llevó a cabo un estudio descriptivo en el que analizamos el contenido de 732 perfiles de hombres y mujeres (H=491; M=241) que buscaban una relación estable con parejas de su mismo sexo biológico. Las categorías analizadas fueron: edad, atractivo físico (apariencia, contextura, estatura y peso), estatus socioeconómico (situación laboral, nivel educativo y zona de residencia buscada), estado civil, número de hijos y hábitos saludables (fumar y beber). Los resultados encontrados muestran que los hombres presentan rangos amplios en las características deseadas en una pareja (edad=16.87; estatura=11.37; peso=15.23) y además buscan personas menores a la edad ofrecida (M=-4.17 años). En las mujeres se encontró que los rangos son más restringidos (edad=13.85; estatura=9.83; peso=12.77) y además prefieren parejas mayores (M=2.89 años). A nivel general, se evidencia que los resultados encontrados en la mayoría de las variables podrían indicar congruencia con los planteamientos de la teoría de inversión parental y estrategias sexuales; sin embargo, en otras variables los resultados no son claros.

Las reformas emprendidas en Túnez de la mano del FMI y el BM ¿Precedente para la revolución de los Jazmines?”(1987-2010)

El estallido de la “Revolución de los Jazmines” cuestionó el éxito de un país que por más de dos décadas fue exaltado por el Banco Mundial (BM) y el Fondo Monetario Internacional (FMI) por los logros alcanzados gracias a un programa de restructuración económica. Las exigencias e inconformidades de los manifestantes, que iban más allá de la falta de garantías democráticas, permitieron ver que el país sufría de problemas estructurales relacionados a los altos niveles de desempleo, la precariedad de la situación laboral y la desigualdad. Esta monografía pretende evaluar el papel que tuvieron las reformas económicas y en general el modelo de desarrollo que siguió Túnez de la mano del FMI y el BM, en el surgimiento y consolidación de las condiciones que dieron lugar a la Revolución de los Jazmines a finales del año 2010.

Sistema informático de gestão e análise de genealogias

A selecção do tema e consequente trabalho de que emerge o titulo desta dissertação decorreu do facto de se ter tomado conhecimento da necessidade que os membros do projecto FCOMP-01-0124-FEDER-007360 - Inquirir da Honra: Comissários do Santo Oficio e das Ordens Militares em Portugal (1570 - 1773) tiveram para satisfazer alguns objectivos em particular relacionados com a Genealogia da rede de Comissários. O sistema de trabalho manual que até aqui era utilizado, continha uma quantidade considerável de informação complexa, descrevendo ao pormenor as características não só dos indivíduos, mas também do que estava associado ao mesmo, incluindo quem e como se relacionava com as demais figuras. O principal objectivo consistiu assim em responder à pergunta: "Como será possível efectuar uma gestão de toda a informação genealógica recolhida no papel e permitir a sua análise no computador, recorrendo a tecnologias que, por um lado sejam eficientes, e por outro, fáceis de aprender pelos utilizadores?". Para conseguir responder à questão, foi necessário conhecer em primeira mão, o universo da Genealogia e a forma como opera, para que posteriormente, se desenhasse e moldasse toda uma aplicação às necessidades do utilizador. No entanto, a aplicação não se centra apenas em permitir ao utilizador efectuar uma gestão, recorrendo a um sistema de gestão de bases de dados MySQL e permitir a análise genealógica "tradicional" em programas como o Personal Ancestral File. Pretende-se sobretudo, que o utilizador faça uso e responda às perguntas "do presente" esperando que a própria aplicação sirva de motivação para novas perguntas, com a integração da tecnologia XML e do Sistema de Informação Geográfico, Google Earth, permitindo assim a análise de informação genealógica no mapa-mundo. ABSTRACT: The choice of this essay's work subject is set on the need to accomplish determinate goals related with the Genealogy of the network lnquisition Commissioners on behalf of the project FCOMP-01-0124-FEDER-007360 members - Inquirir da Honra: Comissários do Santo Ofício e das Ordens Militares em Portugal (1570 - 1773)- To Inquire Honor: Inquisition Commissioners and the Military Orders in Portugal. The manual work system used till now presented a considerable amount of complex information, describing in detail characteristics not only of individuals but also of what is associated to it, including whoandhow. The main goal aimed at thus responding to: «How could it be possible to select and examine all the genealogical data registered on paper and allow it to be analyzed on computer, by means of technology that on one hand are efficient and on other hand easy to learn by its users? ». ln order to get to the answer to that matter, it was necessary to acknowledge firstly the Genealogy's universe so afterwards it could be possible to outline and shape an entire application to user needs. Nevertheless, the application does not only focus on allowing the user to carry out the system’s management, using MySQL database management system and allowing the "traditional" genealogical management in programs such as the Personal Ancestral File. Above all the user should get involved with it and answer the key questions of 'the present’ hoping that the application serves by itself as motivation to arouse new questions with the integration of XML technology and Geographic Information System, Google Earth, thus allowing the analysis of genealogical information worldwide.

Tracing acidification induced by Deccan Phase 2 volcanism

The Deccan Volcanic Province (DVP) was built up by three major phases of eruptions; the most voluminous of which, the Deccan Phase 2, encompassed the Cretaceous–Palaeogene (KT) boundary. Deccan eruptions have been implicated as a contributor to the end-Cretaceous mass extinction, however, mechanism by which volcanic activity affected biota remains poorly understood. We applied a combination of rock magnetic techniques scanning electron microscopy to characterize mineral assemblages of three sections of intertrappean lacustrine sediments from the north-western Maharashtra Deccan Volcanic Provinces. Our results indicate that in sediments deposited during the early stages of the Deccan Phase 2, the Daïwal River and Dhapewada sequences, iron-bearing mineral association is dominated by detrital iron oxides (magnetite and hematite) sourced from the weathering of the surrounding basaltic bedrocks, with minor contribution form authigenic iron sulphides (framboidal pyrite, pyrrhotite and/or greigite). The sediments deposited during the final stages of Phase 2 (the Podgawan sequence) differ significantly in their characteristics. In particular, the Podgawan sediments have 1) very low magnetic susceptibility values, but higher terrigenous fraction (clays and shales) content; 2) more complex assemblage of magnetic minerals, 3) ubiquitous presence of Fe–Ca–Ce vanadates; and 4) unusual lithological variations in the middle part of the section (represented by a charcoal-rich level that is capped by a red clay layer containing fossilized bacterial colonies). We suggest that these unusual characteristics reflect increased acidity in the region during the deposition of the Podgawan sequence, likely due to cumulative effects of volcanic aerosols released during the Deccan Phase 2 eruptions. The combination of these features may be used to recognize episodes of increased acidity in the geological record. Our results also contribute to understanding of local vs. global effects of the Deccan volcanism.

Building the Commercial Education Professional Competency Profile

This paper provides a complete description of the Commercial Education Professional Competency Profile that resulted from the curricular diagnosis of the Licenciatura en Educación Comercial , at the Universidad Nacional, Costa Rica.  The methodological strategy used relies on the principles of research on education. Upon expert validation, written questionnaires were applied to first-year students, students of the licenciatura, practicing professionals and employers. The objective was to describe a particular education situation. Data was analyzed according to two categories: intentions/principles and scope/development. The findings resulted in the characteristics of the Commercial Education professionals, i.e. characteristics related to the discipline, characteristics related to the administrative management of teaching, specific and general characteristics of education and pedagogy, and characteristics associated to human development. Based on those criteria, on the curricular requirements of the information sources and on the curricular perspectives of the Academic Unit, ideas were put into practice to build the competency profile. The ideas proposed comprise the curricular fundamentals of the educational project on which the profile is set out, which include the subject of the study program, the global competency or training goal, the generic competencies as cross-cutting approaches, as well as the –pedagogical and disciplinary− specific competencies. The specific competencies of the discipline are focused on four competency areas: document production, organizational support, technological resources and information management.(1) Translator’s Note: One-year post-Bachelor study program in Commercial Education.

Population growth and physiological characteristics of microalgae in a miniaturized bioreactor during space flight

A strain of microalgae (Anabaena siamensis) had been cultured in a miniaturized bioreactor during a retrievable satellite flight for 15 days. By means of remote sensing equipment installed in the satellite, we gained the growth curve of microalgae population in space every day in real time. The curve indicated that the growth of microalgae in space was slower than the control on ground. Inoculation of the retrieved microalgae culture showed that the growth rate was distinctively higher than ground control. But after several generations, both cultures indicated similar growth rates. Those data showed that algae, can adapt to space environment easily which may be valuable for designing more complex bioreactor and controlled ecological life support system in future experiment. (C) 2006 Elsevier Ltd. All rights reserved.

Biomass burning influenced particles characteristics in Northern Territory Australia based on airborne measurements

Airborne measurements of particle number concentrations from biomass burning were conducted in the Northern Territory, Australia, during June and September campaigns in 2003, which is the early and the late dry season in that region. The airborne measurements were performed along horizontal flight tracks, at several heights in order to gain insight into the particle concentration levels and their variation with height within the lower boundary layer (LBL), upper boundary layer (UBL), and also in the free troposphere (FT). The measurements found that the concentration of particles during the early dry season was lower than that for the late dry season. For the June campaign, the concentration of particles in LBL, UBL, and FT were (685 ± 245) particles/cm3, (365 ± 183) particles/cm3, and (495 ± 45) particle/cm3 respectively. For the September campaign, the concentration of particles were found to be (1233 ± 274) particles/cm3 in the LBL, (651 ± 68) particles/cm3 in the UBL, and (568 ± 70) particles/cm3 in the FT. The particle size distribution measurements indicate that during the late dry season there was no change in the particle size distribution below (LBL) and above the boundary layer (UBL). This indicates that there was possibly some penetration of biomass burning particles into the upper boundary layer. In the free troposphere the particle concentration and size measured during both campaigns were approximately the same.

Flap‐Lag Damping in Hover and Forward Flight with a Three‐Dimensional Wake

Prediction of lag damping is difficult owing to the delicate balance of drag, induced drag and Coriolis forces in the in‐plane direction. Moreover, induced drag” is sensitive to dynamic wake, bath shed and trailing components, and thus its prediction requires adequate unsteady‐wake representation. Accordingly, rigid‐blade flap‐lag equations are coupled with a three‐dimensional finite‐state wake model; three isolatcd rotor canfigurations with three, four and five blades are treated over a range of thrust levels, tack numbers, lag frequencies and advance ratios. The investigation includes convergence characteristics of damping with respect to the number of radial shape functions and harmonics of the wake model for multiblade modes of low frequency (< 1/ rev.) to high frequency (> 1/rev.). Predicted flap and lag damping levels are then compared with similar predictions with 1) rigid wake (no unsteady induced now), 2) Loewy lift deficiency and 3) dynamic inflow. The coverage also includes correlations with the measured lag regressive‐mode damping in hover and forward flight and comparisons with similar correlations with dynamic inflow. Lag‐damping predictions with the dynamic wake model are consistently higher than the predictions with the dynamic inflow model; even for the low frequency lag regressive mode, the number of wake harmonics should at least be equal to twice the number of blades.

Flap-lag-torsion stability in hover and forward flight with three-dimensional wake

The contributions of full-wake dynamics in trim analysis are demonstrated for finding the control inputs and periodic responses simultaneously, as well as in Floquet eigenanalysis for finding the damping levels. The equations of flap bending, lag bending, and torsion are coupled with a three-dimensional, finite state wake, and low-frequency (<1/rev) to high frequency (>1/rev) multiblade modes are considered. Full blade-wake dynamics is used in trim analysis and Floquet eigenanalysis. A uniform cantilever blade in trimmed flight is investigated over a range of thrust levels, advance ratios, number of blades, and blade torsional frequencies. The investigation includes the convergence characteristics of control inputs, periodic responses, and damping levels with respect to the number of spatial azimuthal harmonics and radial shape functions in the wake representation. It also includes correlation with the measured lag damping of a three-bladed untrimmed rotor. The parametric study shows the dominant influence of wake dynamics on control inputs, periodic responses, and damping levels, and wake theory generally improves the correlation.

A comparison between ion characteristics observed by the POLAR and DMSP spacecraft in the high-latitude magnetosphere

We study here the injection and transport of ions in the convection-dominated region of the Earth’s magnetosphere. The total ion counts from the CAMMICE MICS instrument aboard the POLAR spacecraft are used to generate occurrence probability distributions of magnetospheric ion populations. MICS ion spectra are characterised by both the peak in the differential energy flux, and the average energy of ions striking the detector. The former permits a comparison with the Stubbs et al. (2001) survey of He2+ ions of solar wind origin within the magnetosphere. The latter can address the occurrences of various classifications of precipitating particle fluxes observed in the topside ionosphere by DMSP satellites (Newell and Meng, 1992). The peak energy occurrences are consistent with our earlier work, including the dawn-dusk asymmetry with enhanced occurrences on the dawn flank at low energies, switching to the dusk flank at higher energies. The differences in the ion energies observed in these two studies can be explained by drift orbit effects and acceleration processes at the magnetopause, and in the tail current sheet. Near noon at average ion energies of _1 keV, the cusp and open LLBL occur further poleward here than in the Newell and Meng survey, probably due to convectionrelated time-of-flight effects. An important new result is that the pre-noon bias previously observed in the LLBL is most likely due to the component of this population on closed field lines, formed largely by low energy ions drifting earthward from the tail. There is no evidence here of mass and momentum transfer from the solar wind to the LLBL by nonreconnection coupling. At higher energies (_2–20 keV), we observe ions mapping to the auroral oval and can distinguish between the boundary and central plasma sheets. We show that ions at these energies relate to a transition from dawnward to duskward dominated flow, this is evidence of how ion drift orbits in the tail influence the location and behaviour of the plasma populations in the magnetosphere.

Flight to quality? An investigation of changing price spreads in commercial real estate markets

Purpose – The purpose of this paper is to investigate the effect of the crisis on the pricing of asset quality attributes. This paper uses sales transaction data to examine whether flight from risk phenomena took place in the US office market during the financial crisis of 2007-2009. Design/methodology/approach – Hedonic regression procedures are used to test the hypothesis that the spread between the pricing of low-quality and high-quality characteristics increased during the crisis period compared to the pre-crisis period. Findings – The results of the hedonic regression models suggest that the price spread between Class A and other properties grew significantly during the downturn. Research limitations/implications – Our results are consistent with the hypothesis of an increased price spread following a market downturn between Class A and non-Class A offices. The evidence suggests that the relationships between the returns on Class A and non-Class A assets changed during the period of market stress or crisis. Practical implications – These findings have implications for real estate portfolio construction. If regime switches can be predicted and/or responded to rapidly, portfolios may be rebalanced. In crisis periods, portfolios might be reweighted towards Class A properties and in positive market periods, the reweighting would be towards non-Class A assets. Social implications – The global financial crisis has demonstrated that real estate markets play a crucial role in modern economies and that negative developments in these markets have the potential to spillover and create contagion for the larger economy, thereby affecting jobs, incomes and ultimately people’s livelihoods. Originality/value – This is one of the first studies that address the flight to quality phenomenon in commercial real estate markets during periods of financial crisis and market turmoil.

Performance evaluation of a miniature laser ablation time-of-flight mass spectrometer designed for in situ investigations in planetary space research

Key performance features of a miniature laser ablation time-of-flight mass spectrometer designed for in situ investigations of the chemical composition of planetary surfaces are presented. This mass spectrometer is well suited for elemental and isotopic analysis of raw solid materials with high sensitivity and high spatial resolution. In this study, ultraviolet laser radiation with irradiances suitable for ablation (< 1 GW/cm2) is used to achieve stable ion formation and low sample consumption. In comparison to our previous laser ablation studies at infrared wavelengths, several improvements to the experimental setup have been made, which allow accurate control over the experimental conditions and good reproducibility of measurements. Current performance evaluations indicate significant improvements to several instrumental figures of merit. Calibration of the mass scale is performed within a mass accuracy (Δm/m) in the range of 100 ppm, and a typical mass resolution (m/Δm) ~600 is achieved at the lead mass peaks. At lower laser irradiances, the mass resolution is better, about (m/Δm) ~900 for lead, and limited by the laser pulse duration of 3 ns. The effective dynamic range of the instrument was enhanced from about 6 decades determined in previous study up to more than 8 decades at present. Current studies show high sensitivity in detection of both metallic and non-metallic elements. Their abundance down to tens of ppb can be measured together with their isotopic patterns. Due to strict control of the experimental parameters, e.g. laser characteristics, ion-optical parameters and sample position, by computer control, measurements can be performed with high reproducibility. Copyright © 2012 John Wiley & Sons, Ltd.

An engineering modification of the blade element momentum combination applicable in vertical descent flight :fundamentals and validation

An engineering modification of blade element/momentum theory is applied to describe the vertical autorotation of helicopter rotors. A full non‐linear aerodynamic model is considered for the airfoils, taking into account the dependence of lift and drag coefficients on both the angle of attack and the Reynolds number. The proposed model, which has been validated in previous work, has allowed the identification of different autorotation modes, which depend on the descent velocity and the twist of the rotor blades. These modes present different radial distributions of driven and driving blade regions, as well as different radial upwash/downwash patterns. The number of blade sections with zero tangential force, the existence of a downwash region in the rotor disk, the stability of the autorotation state, and the overall rotor autorotation efficiency, are all analyzed in terms of the flight velocity and the characteristics of the rotor. It is shown that, in vertical autorotation, larger blade twist leads to smaller values of descent velocity for a given thrust generated by the rotor in the autorotational state.