Influencia de la heterogeneidad del paisaje sobre la diversidad y la estructura trófica de los ensambles de artrópodos en ambientes agrícolas de la pampa ondulada

Esta tesis estudia los efectos de la heterogeneidad del paisaje (contexto) sobre la diversidad de las especies de artrópodos y su estructura trófica en agro-ecosistemas. Específicamente, se evaluó la función de los habitats no-cultivados adyacentes a los cultivos, como los alambrados, en el mantenimiento de la diversidad artrópodos mediante la modificación de los efectos de derrame (spillover) en las interfaces entre los cultivos y los habitats no-cultivados. A escala de paisaje, se presentan evidencias de la influencia de la heterogeneidad del paisaje sobre los componentes aditivos de la diversidad total (diversidad fÁ) : la riqueza local (diversidad f¿) y el reemplazo de especies (diversidad fÀ). Así, la diversidad fÀ explicó una parte importante de la variación en la diversidad total del paisaje, reflejando los cambios en el área y la densidad de los habitats no-cultivados. A escala de lote, la riqueza local y la estructura trófica de las comunidades de artrópodos variaron en función de la posición en el lote (centro, borde y alambrado) y el tipo del cultivo. Estos resultados indican que los alambrados son elementos clave en los paisajes agrícolas para mantener la riqueza regional de artrópodos. Por otra parte, se demostró que los efectos de spillover modifican los patrones de diversidad incrementando la riqueza de especies en los márgenes de los cultivos, actuando los alambrados como fuente de especies que mitigan el impacto negativo del manejo agrícola. Por último, la riqueza de especies de los ensambles de artrópodos parasíticos aumentó con la heterogeneidad del paisaje. El aumento de la frecuencia de asociaciones minador-parasitoide contribuyó a la regulación biológica de un herbívoro novel. Los resultados presentados aqui son relevantes no solo para los paisajes rurales pampeanos (grano grueso, lotes extensos, uso de la tierra heterogéneo y alta intensificación agricola), sino también para entender los factores que definen la diversidad de los ensambles de artrópodos y su relación con la provisión de servicios ecosistemicos

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time

Obtenção de óxidos a base de níquel e cobalto para reação de oxidação parcial do metano

Nickel-based catalysts supported on alumina have been widely used in various reactions to obtain synthesis gas or hydrogen. Usually, higher conversion levels are obtained by these catalysts, however, the deactivation by coke formation and sintering of metal particles are still problems to be solved. Several approaches have been employed in order to minimize these problems, among which stands out in recent years the use of additives such as oxides of alkali metals and rare earths. Similarly, the use of methodologies for the synthesis faster, easier, applicable on an industrial scale and to allow control of the microstructural characteristics of these catalysts, can together provide the solution to this problem. In this work, oxides with spinel type structure AB2O4, where A represents divalent cation and B represents trivalent cations are an important class of ceramic materials investigated worldwide in different fields of applications. The nickel cobaltite (NiCo2O4) was oxides of spinel type which has attracted considerable interest due to its applicability in several areas, such as chemical sensors, flat panel displays, optical limiters, electrode materials, pigments, electrocatalysis, electronic ceramics, among others. The catalyst precursor NiCo2O4 was prepared by a new chemical synthesis route using gelatine as directing agent. The polymer resin obtained was calcined at 350°C. The samples were calcined at different temperatures (550, 750 and 950°C) and characterized by X ray diffraction, measurements of specific surface area, temperature programmed reduction and scanning electron microscopy. The materials heat treated at 550 and 750°C were tested in the partial oxidation of methane. The set of techniques revealed, for solid preparations, the presence of the phase of spinel-type structure with the NiCo2O4 NixCo1-xO solid solution. This solid solution was identified by Rietveld refinement at all temperatures of heat treatment. The catalyst precursors calcined at 550 and 750°C showed conversion levels around 25 and 75%, respectively. The reason H2/CO was around 2 to the precursor treated at 750°C, proposed reason for the reaction of partial oxidation of methane, one can conclude that this material can be shown to produce synthesis gas suitable for use in the synthesis Fischer-Tropsch process

Tendências das aves noturnas em Portugal: metodologias e análise de um programa de monitorização baseado em colaboradores voluntários

Uma avaliação das metodologias de análise e recolha de dados aplicadas pelo Programa NOCTUAPortugal é de extrema importância para se apurar se estas são as mais indicadas em estudos de citizen science. Comparou-se os resultados de diferentes metodologias analíticas de estimação das tendências populacionais das espécies de aves noturnas durante o período de realização do Programa NOCTUA-Portugal (análise gráfica simples, modelos lineares generalizados (GLM-Poisson e GLMM), modelos aditivos generalizados (GAM-LOESS e GAM-mgcv) e software TRIM). Analisou-se a metodologia de censo de modo a avaliar o número de registos face à duração dos pontos de escuta, comparar a eficiência do ponto de deteção com outros estudos, variação das respostas ao longo da noite e efeito da época do ano, vento, nebulosidade e luminosidade da lua. Os resultados mostraram que a metodologia analítica mais indicada era o GLMM e que não era necessário realizar nenhum ajuste em particular na metodologia de censo; Trends in nocturnal birds in Portugal Methods and analysis of a volunteer-based monitoring program ABSTRACT: An evaluation of the methodologies of analysis and data collection applied by NOCTUA-Portugal Program is extremely important to determine whether these are the most suitable in citizen science studies. We compared the results of different analytical methodologies to estimate population trends of the species of nocturnal birds during the period of the NOCTUA-Portugal Program (simple graphical analysis, generalized linear models (GLM-Poisson and GLMM), generalized additive models (GAM-LOESS and GAMmgcv) and software TRIM). We analyzed the field methodology to assess the effect of point duration on the number of records, compared the point count efficiency with other sources, the variation of responses throughout the night, the effect of time of year, wind, cloud cover and moon luminosity. The results showed that the most suitable analytical methodology was the GLMM and it was not necessary to make any particular adjustment in the field methodology.

Evaluación del estado de eutrofización del mar Alborán mediante el empleo combinado de imágenes de satélite y de muestreos in situ

La eutrofización marina es un problema que afecta a los mares europeos y particularmente a sus aguas costeras. Se trata del enriquecimiento anómalo en nutrientes de las aguas marinas, generalmente compuestos del nitrógeno y fósforo aportados por la actividad del ser humano, y que tiene como resultado consecuencias nocivas para la calidad de las aguas y la biodiversidad. La Directiva Marco de las Estrategias Marinas, que entró en vigor en 2010, recoge esta problemática y emplaza a los estados miembros para su evaluación y en su caso para la remediación de sus efectos nocivos identificando el origen de los aportes de nutrientes. Esta tarea requiere metodologías y procedimientos operativos que permitan ser implementados de forma coordinada por los estados miembros a nivel regional. En el primer capítulo de esta tesis se presenta una metodología para realizar la zonación del norte del mar Alborán a partir de imágenes de satélite de clorofila a tal que permite delimitar las áreas con características de productividad diferenciadas que pueden ser propuestas como unidades de gestión de la eutrofización y que se puedan emplear tanto en el diseño de los programas de seguimiento como en el aprovechamiento de los datos oceanográficos medidos in situ. En este capítulo se describe la metodología analítica utilizada, que está basada en la aplicación del análisis clúster de las k-medias a las imágenes de satélite de clorofila, así como su validez a partir del análisis de las series temporales de datos tomados in situ. El segundo capítulo se hace una evaluación de los indicadores de la eutrofización en una zona reducida de Alborán, donde existen multitud de datos oceanográficos, meteorológicos y ambientales. Para llevarla a cabo, se adaptó la metodología empleada en el capítulo 1 a la región ECOMALAGA. Una vez realizada la zonación, se agregaron los datos oceanográficos, meteorológicos y ambientales potencialmente relacionados con la eutrofización en cada área, y posteriormente se evaluaron las diferencias estadísticas a lo largo del ciclo estacional y entre las diferentes zonas. Con esta finalidad, se estiman las tendencias temporales de las variables ambientales en cada zona. A partir de los resultados obtenidos se infirió qué variables y/o mecanismos podrían estar influyendo sobre la concentración superficial de la clorofila a. En el tercer capítulo se ensayaron modelos aditivos generalizados (GAM) con el fin de identificar las variables más importantes que afectan a los indicadores de la eutrofización. Como variable respuesta del modelo se usó la clorofila a, pues se trata del indicador directo de la eutrofización más empleado. Las variables explicativas se componen de variables oceanográficas, meteorológicas y ambientales. En el cuarto capítulo se desarrolla un algoritmo regional para el mar de Alborán que permite obtener valores de clorofila a a partir de imágenes de satélite más ajustados a los valores que proporcionan los algoritmos disponibles que la sobreestiman considerablemente. En la discusión final y conclusiones se hace énfasis en el enfoque práctico de esta tesis doctoral, detallando la potencialidad de la metodología presentada para la evaluación de la eutrofización. Para esto, se detallan los resultados de la evaluación obtenidos para el mar Alborán empleando dicha metodología, definiendo su estado actual y las tendencias registradas, así como las causas de los problemas encontrados. Finalmente se evalúan y proponen posibles medidas para su remediación y control.

Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.

Formulação de grautes leves para a cimentação de poços de petróleo onshore

Grautes are dry mixes with hydraulic characteristics widely used in construction. This material comprises cement, mineral additives and dosed in accordance with the desired properties. The use of grautes in cementing oil wells potentially increases the precision in the composition of the mixture, since it is requires only the addition of the mixing water before its pumping. Such benefit may be availed in cementing wells since the formulations grautes meet the temperature and pressure characteristics typical of wells. The objective of this study is to evaluate the effect of adding different percentages of industrial minerals properties of light grautes for onshore oil wells. For the formulation of the employees were grautes light industrial minerals and waste minerals abundant in the Northeast, in addiction to Portland cement and chemical additives Special class. Grautes were formulated with densities between 1.55 g/cm3 (13.0 lb/gal) and 1.68 g/cm3 (14 lb/gal). Tests results showed that grautes with higher density in the range studied meet the specifications for cementation of shallow wells onshore. The compositions lighter can also be adjusted for applying the material in the cementation of oil wells

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)

Síntese, aplicação e avaliação do efeito do teor de fósforo da celulose fosfatada em argamassa de alvenaria com aditivo comercial a base de hidroxi-etil-metil celulose (HEMC)

Generally, cellulose ethers improves mortar properties such as water retention, workability and setting time, along with adherence to the substrate. However, a major disadvantage of the addition of cellulose ethers in mortars is the delay in hydration of the cement. In this paper a cellulose phosphate (Cp) was synthesized water soluble and has been evaluated the effect of their incorporation into mortar based on Portland cement. Cellulose phosphate obtained was characterized by spectrophotometry Fourier transform infrared (FTIR), X-ray diffraction (XRD), elemental analysis and scanning electron microscopy (SEM). Mortar compositions were formulated with varying phosphorus content in cellulose and cellulose phosphate concentrations, when used in partial or total replacement of the commercial additive based hydroxyethyl methyl cellulose (HEMC). The mortars formulated with additives were prepared and characterized by: testing in the fresh state (consistency index, water retention, bulk density and air content incorporated) and in the hardened state (absorption by capillarity, density, flexural and compression strength). In mixtures the proportion of sand:cement of 1:5 (v / v) and factor a / c = 1.31 and water were held constant. Overall, the results showed that the celluloses phosphates employed in mortars added acted significantly when partially substituting the commercial additive. With regard to consistency index, water retention and bulk density in the fresh state and absorption by capillarity and bulk density apparent in the hardened state, showed no appreciable differences as compared to the commercial additive. The incorporated air content in the fresh state reduced markedly, but did not affect other properties. The mortars with cellulose phosphate, partially replacing the commercial additive showed an improvement of the properties of flexural strength and compressive strength

Regimes alimentares no cavalo de desporto : a utilização de alimentos compostos complementares na suplementação das dietas

Dissertação de Mestrado em Engenharia Zootécnica / Produção Animal

Efeito da incorporação de diatomita na estabilidade e permeabilidade de compósitos cimentíceos espumados aplicados a poços de petróleo

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Efecto de la fermentación de harina de pluma con cascara de piña (ananascomosus l. merr) sobre su composición y digestibilidad en pepsina

Tesis (Zootecnista). -- Universidad de La Salle. Facultad de Ciencias Agropecuarias. Programa Zootecnia, 2014

Avaliação da adição de Nanosílica e silicato de sódio em pastas de cimento para poços de petróleo com baixo gradiente de fratura

The oil wells cementing is a critical step during the phase of well drilling, because problems during the operation of slurry pumping and an incomplete filling of the annular space between the metal casing and the formation can cause the slurry loss. Therefore, the slurry adopted in primary cementing an oil well must be properly dosed so that these problems are avoided during its pumping. When you drill a well in a weak rock formation requires even more careful, because should be a limit of hydrostatic pressure exerted during cementation, that does not occur rock collapse. With the objective of performing the cementing of a well whose formation is weak or unconsolidated are employed lighter slurries. Thus, this study used slurries with sodium silicate and nano silica in concentrations of 0,1; 0,4; 0,7 e 1,0 gpc, in which the slurries with nano silica showed the rheological parameters higher concentrations of up to 0.7 gpc and for concentration of 1.0 the slurry with sodium silicate obtained the highest values, remaining above the limits for application in fields, mainly wells with low fracture gradient, because a significant increase in viscosity may result in an increase in pressure pumping in operations of secondary cementations. Furthermore, there was no decrease in strength with increasing concentration of additive. Then, it is possible use of these additives to formulate Lighter slurry