Pädagogische Metadaten im E-Learning. Allgemeine Problemfelder und exemplarische Fragestellungenam Beispiel der Virtuellen Fachhochschule

Mit dem Einsatz der neuen Medien, insbesondere des Internet, im Bereich des Lehrens und Lernens werden – auch nach dem Abklingen der ersten Euphorie – hohe Erwartungen verbunden. Dabei spielen neue, pädagogisch interessante Nutzungsmöglichkeiten, aber auch wirtschaftliche Interessen eine wesentliche Rolle. Die damit verbundenen Fragen (z.B. nach der Sicherung von Qualität und Gewährleistung von Rentabilität) führen zu einem steigenden Interesse an Metadaten zur Beschreibung von telematischen Lehr-/Lernmaterialien (zum Begriff „telematisch“ vgl. Zimmer, 1997, S. 111). Der folgende Beitrag befasst sich mit Erwartungen und Schwierigkeiten bei der Entwicklung und dem Einsatz pädagogischer Metadaten. Im Anschluss an eine kurze allgemeine Darstellung der Funktion von Metadaten wird unter Rückgriff auf Vorschläge verschiedener Gremien zur Bestimmung pädagogischer Metadaten gezeigt, welche Probleme bei deren Findung, Benennung und Implementierung auftreten: So stellen sich z.B. Fragen nach der interkulturellen Übertragbarkeit, nach den unterschiedlichen Perspektiven von Contentanbietern und Lernenden sowie auch die grundsätzliche Frage nach der Möglichkeit der Standardisierung pädagogischer Kategorien. Anhand des Praxisbeispiels der Virtuellen Fachhochschule für Technik, Informatik und Wirtschaft werden projekttypische Entwicklungsstufen von (pädagogischen) Metadaten dargestellt. Vorschläge zur Lösung der beschriebenen Probleme und ein Ausblick mit Forschungsfragen schließen den Beitrag ab.(DIPF/Orig.)

Erfahrungen mit didaktischen Konzepten virtueller Lehre. Virtueller Weiterbildungsstudiengang Wirtschaftsinformatik (VAWi)

Im folgenden Beitrag werden anhand von zwei Kursen aus dem „Virtuellen Weiterbildungsstudiengang Wirtschaftsinformatik“ (VAWi) Erfolgsfaktoren didaktischer Konzepte analysiert. Ausgehend von der allgemeinen didaktischen Konzeption des internetbasierten Masterstudiengangs VAWi wird beschrieben, wie die Kurse „Lerntechnologien“ und „Qualität und Evaluation in der Bildung“ didaktisch konzipiert und umgesetzt werden und welche Erfahrungen mit dem Kurs gemacht wurden. Der Beitrag schließt damit, aus den gesammelten Erfahrungen allgemeingültige Erfolgsfaktoren für die didaktische Gestaltung virtueller Lehre zu identifizieren.(DIPF/Orig.)

Vom Seminar zur Lerneinheit – und zurück. Der abgestimmte Prozess zur Konzeption und Produktion von interaktiven Lernmaterialien als nachhaltige Erweiterung des Studienangebots an Hochschulen

Im Rahmen des BMBF-Leitprojektes „Virtuelle Fachhochschule“ werden in einem interdisziplinären Team an der TFH Berlin 12 Online-Studienmodule für die Bachelor-Studiengänge Medieninformatik und Wirtschaftsingenieurwesen produziert. Unter der Leitung langjährig in der Lehre erfahrener Professorinnen und Professoren wurden mediendidaktisch anspruchsvolle Online-Kurse entwickelt. Das didaktische Design war neben der Produktentwicklung konsequent auf die Entwicklung eines effizienten Produktionsprozesses für multimediales Lernmaterial ausgerichtet. Das Online-Lernmaterial ist so modular aufgebaut, dass Teile daraus in die Präsenzlehre integrierbar sind. Der mehrstufige, abgestimmte Produktionsprozess kann für die kostengünstige Erstellung von Online-Material in anderen Fächern genutzt werden. Das Verfahren ist darüber hinaus erweiterbar. Diese Entwicklung leistet einen Beitrag zur nachhaltigen Integration von Online- Lehr- und Lernangeboten im Hochschulbereich.(DIPF/Orig.)

Technical and Didactical Scenarios of Student-centered Teaching and Learning

In this paper we envision didactical concepts for university education based on self-responsible and project-based learning and outline principles of adequate technical support. We use the scenario technique describing how a fictive student named Anna organizes her studies of informatics at a fictive university from the first days of her studies to make a career for herself.(DIPF/Orig.)

Digitaler Campus: Vom Medienprojekt zum nachhaltigen Medieneinsatz in der Hochschule

Mit den zunehmend verfügbaren Erkenntnissen aus einer Vielzahl von Projekten und Aktivitäten an Hochschulen geht es heute vorrangig nicht mehr um die Erprobung „neuer“ Ansätze mediengestützten Lernens, sondern um die (Weiter-) Entwicklung von Strukturen und Prozessen, um bestehende Ansätze auf der Basis solcher Erkenntnisse konsequent zu erweitern und die aufgezeigten Potenziale digitaler Medien in der Lehre gezielt zu nutzen. Zentrale Aufgaben werden die Umsetzung von Konzepten des Medieneinsatzes in der alltäglichen Lehre und deren dauerhafte Integration in den Hochschulalltag, in Studienrichtungen und Studiengänge. Dieser Band gibt einen Einblick in aktuelle Bemühungen an Hochschulen, diese Prozesse der Hochschulentwicklung mit und durch Medien zu gestalten. Er beinhaltet die Vorträge der GMW03 – Conference on Media in Higher Education, der 8. Jahrestagung der Gesellschaft für Medien in der Wissenschaft e.V., die vom 16.-19. September 2003 an der Universität Duisburg-Essen stattgefunden hat. (DIPF/Orig.)

Geography, History and Natural Sciences: an interdisciplinary teaching approach with GIS

Geographic Information System (GIS) is a technology that deals with location to support better representations and decision making. It has a long tradition in several planning areas, such as urbanism, environment, riskiness, transportation, archeology or tourism. In academics context higher education has followed that evolution. Despite of their potentialities in education, GIS technologies at the elementary and secondary have been underused. Empowering graduates to learn with GIS and to manipulate spatial data can effectively facilitate the teaching of critical thinking. Likewise it has been recognized that GIS tools can be incorporated as an interdisciplinary pedagogical tool. Nevertheless more practical examples on how GIS tools can enhance teaching and learning process, namely to promote interdisciplinary approaches. The proposed paper presents some results obtained from the project “Each thing in its place: the science in time and space”. This project results from the effort of three professors of Geography, History and Natural Sciences in the context of Didactics of World Knowledge curricular unit to enhance interdisciplinarity through Geographic Information Technologies (GIT). Implemented during the last three years this action-research project developed the research practice using GIS to create an interdisciplinary attitude in the future primary education teachers. More than teaching GIS the authors were focused on teaching with GIS to create an integrated vision where spatial data representation linked the space, the time and natural sciences. Accumulated experience reveals that those technologies can motivate students to learn and facilitating teacher’s interdisciplinary work.

Assessment and Life-Cycle Analysis of Recycled Materials for Sustainable Highway

Recycled materials replacing part of virgin materials in highway applications has shown great benefits to the society and environment. Beneficial use of recycled materials can save landfill places, sparse natural resources, and energy consumed in milling and hauling virgin materials. Low price of recycled materials is favorable to cost-saving in pavement projects. Considering the availability of recycled materials in the State of Maryland (MD), four abundant recycled materials, recycled concrete aggregate (RCA), recycled asphalt pavement (RAP), foundry sand (FS), and dredged materials (DM), were studied. A survey was conducted to collect the information of current usage of the four recycled materials in States’ Department of Transportation (DOTs). Based on literature review, mechanical and environmental properties, recommendations, and suggested test standards were investigated separately for the four recycled materials in different applications. Constrains in using these materials were further studied in order to provide recommendations for the development of related MD specifications. To measure social and environmental benefits from using recycled materials, life-cycle assessment was carried out with life-cycle analysis (LCA) program, PaLATE, and green highway rating system, BEST-in-Highway. The survey results indicated the wide use of RAP and RCA in hot mix asphalt (HMA) and graded aggregate base (GAB) respectively, while FS and DM are less used in field. Environmental concerns are less, but the possibly low quality and some adverse mechanical characteristics may hinder the widely use of these recycled materials. Technical documents and current specifications provided by State DOTs are good references to the usage of these materials in MD. Literature review showed consistent results with the survey. Studies from experimental research or site tests showed satisfactory performance of these materials in highway applications, when the substitution rate, gradation, temperature, moisture, or usage of additives, etc. meet some requirements. The results from LCA revealed significant cost savings in using recycled materials. Energy and water consumption, gas emission, and hazardous waste generation generally showed reductions to some degree. Use of new recycled technologies will contribute to more sustainable highways.

A tecnologia no ensino da interpretação

Tese de Mestrado em Tradução e Interpretação Especializadas Área Científica de Línguas e Culturas

Electracy in Praxis: Pedagogical Relays for an Undergraduate Writing Curriculum

The paradigm shift from traditional print literacy to the postmodern fragmentation, nonlinearity, and multimodality of writing for the Internet is realized in Gregory L. Ulmer’s electracy theory. Ulmer’s open invitation to continually invent the theory has resulted in the proliferation of relays, or weak models, by electracy advocates for understanding and applying the theory. Most relays, however, remain theoretical rather than practical for the writing classroom, and electracy instruction remains rare, potentially hindering the theory’s development. In this dissertation, I address the gap in electracy praxis by adapting, developing, and remixing relays for a functional electracy curriculum with first-year writing students in the Virginia Community College System as the target audience. I review existing electracy relays, pedagogical applications, and assessment practices – Ulmer’s and those of electracy advocates – before introducing my own relays, which take the form of modules. My proposed relay modules are designed for adaptability with the goals of introducing digital natives to the logic of new media and guiding instructors to possible implementations of electracy. Each module contains a justification, core competencies and learning outcomes, optional readings, an assignment with supplemental exercises, and assessment criteria. My Playlist, Transduction, and (Sim)ulation relays follow sound backward curricular design principles and emphasize core hallmarks of electracy as juxtaposed alongside literacy. This dissertation encourages the instruction of new media in Ulmer’s postmodern apparatus in which student invention via the articulation of fragments from various semiotic modes stems from and results in new methodologies for and understandings of digital communication.

Architectural-Physical Co-Design of 3D CPUs with Micro-Fluidic Cooling

The performance, energy efficiency and cost improvements due to traditional technology scaling have begun to slow down and present diminishing returns. Underlying reasons for this trend include fundamental physical limits of transistor scaling, the growing significance of quantum effects as transistors shrink, and a growing mismatch between transistors and interconnects regarding size, speed and power. Continued Moore's Law scaling will not come from technology scaling alone, and must involve improvements to design tools and development of new disruptive technologies such as 3D integration. 3D integration presents potential improvements to interconnect power and delay by translating the routing problem into a third dimension, and facilitates transistor density scaling independent of technology node. Furthermore, 3D IC technology opens up a new architectural design space of heterogeneously-integrated high-bandwidth CPUs. Vertical integration promises to provide the CPU architectures of the future by integrating high performance processors with on-chip high-bandwidth memory systems and highly connected network-on-chip structures. Such techniques can overcome the well-known CPU performance bottlenecks referred to as memory and communication wall. However the promising improvements to performance and energy efficiency offered by 3D CPUs does not come without cost, both in the financial investments to develop the technology, and the increased complexity of design. Two main limitations to 3D IC technology have been heat removal and TSV reliability. Transistor stacking creates increases in power density, current density and thermal resistance in air cooled packages. Furthermore the technology introduces vertical through silicon vias (TSVs) that create new points of failure in the chip and require development of new BEOL technologies. Although these issues can be controlled to some extent using thermal-reliability aware physical and architectural 3D design techniques, high performance embedded cooling schemes, such as micro-fluidic (MF) cooling, are fundamentally necessary to unlock the true potential of 3D ICs. A new paradigm is being put forth which integrates the computational, electrical, physical, thermal and reliability views of a system. The unification of these diverse aspects of integrated circuits is called Co-Design. Independent design and optimization of each aspect leads to sub-optimal designs due to a lack of understanding of cross-domain interactions and their impacts on the feasibility region of the architectural design space. Co-Design enables optimization across layers with a multi-domain view and thus unlocks new high-performance and energy efficient configurations. Although the co-design paradigm is becoming increasingly necessary in all fields of IC design, it is even more critical in 3D ICs where, as we show, the inter-layer coupling and higher degree of connectivity between components exacerbates the interdependence between architectural parameters, physical design parameters and the multitude of metrics of interest to the designer (i.e. power, performance, temperature and reliability). In this dissertation we present a framework for multi-domain co-simulation and co-optimization of 3D CPU architectures with both air and MF cooling solutions. Finally we propose an approach for design space exploration and modeling within the new Co-Design paradigm, and discuss the possible avenues for improvement of this work in the future.

O impacto das telenovelas brasileiras nos luandenses

Vivemos uma era em que os distintos pontos geográficos do globo se tornaram mais próximos em virtude do estreitamento proporcionado pelo profundo avanço tecnológico dos meios de transporte, mas também pela evolução vertiginosa das novas tecnologias de comunicação que têm permitido fazer com que eventos ocorridos numa determinada região do planeta sejam vistos num outro ponto geográfico, com diferença de apenas algumas horas ou mesmo em tempo real. Graças a esse avanço tecnológico e ao consequente desenvolvimento do processo comercial de transmissão e receção de sinal de televisão por satélite e/ou por cabo, a par do veloz fluxo de informação, são também disponibilizados aos recetores conteúdos de entretenimento que refletem práticas culturais com características marcadamente identitárias, de outras sociedades. Considerando que determinadas condicionantes históricas e económicas do mundo não possibilitam um fluxo bidirecional dos referidos produtos televisivos e o facto de as empresas prestadoras destes serviços se dedicarem exclusivamente à venda de produtos, cujos conteúdos retratam práticas culturais de determinados países (em melhores condições de desenvolvimento económico e tecnológico) existe a possibilidade de se estar diante de um processo de difusão cultural e de aculturação de que são alvo os cidadãos dos países recetores dos referidos conteúdos. Este trabalho pretende efetuar uma análise do impacto das telenovelas brasileiras no comportamento dos luandenses, baseando-se numa pesquisa desenvolvida nos sete municípios da Província de Luanda. Os resultados da pesquisa revelam a presença de componentes culturais brasileiras em práticas sociais dos luandenses há várias gerações e mostram o papel transformador que as telenovelas brasileiras continuam a desempenhar nesta sociedade. A ausência nos canais de televisão locais de mensagens e imagens das representações endógenas favorece a apropriação de práticas culturais exógenas emitidas pelas produções brasileiras e a sua ressignificação no quotidiano local.

Supporting Interoperability of Virtual Factories

Part 14: Interoperability and Integration

Why intelligent travel system is a good organizing trips tool for Polish tourists?

Paper based on the report for the unit on “Sociology of New Information Technologies” at the MSc Industrial Management and Engineering at the Universidade Nova Lisbon, Faculty of Sciences and Technology, under supervision of Prof. António B. Moniz. The report had the support from the ERASMUS program.

Do imaginado ao imaginário : magia, improviso e salvação nas narrativas orais tradicionais e nos discursos de formação da Igreja e da religiosidade católica no Brasil

Tese (doutorado)—Universidade de Brasília, Instituto de Ciências Sociais, Departamento de Sociologia, 2016.