956 resultados para Proteína X associada a bcl-2


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Rate coefficients for radiative association of silicon and sulphur atoms to form silicon monosulphide (SiS) molecule are estimated. The radiative association is due mainly to approach in the E(1)Sigma(+) and A(1)Pi states of SiS. For temperatures ranging from similar to 1000 to similar to 14 000 K, the rate coefficients are found to vary from 8.43 x 10(-17) to 2.69 x 10(-16) cm(3) s(-1). Our calculated rate coefficient is higher than the values used in modelling the chemistry of Type Ia supernovae.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We study how oscillations in the boundary of a domain affect the behavior of solutions of elliptic equations with nonlinear boundary conditions of the type partial derivative u/partial derivative n + g(x, u) = 0. We show that there exists a function gamma defined on the boundary, that depends on an the oscillations at the boundary, such that, if gamma is a bounded function, then, for all nonlinearities g, the limiting boundary condition is given by partial derivative u/partial derivative n + gamma(x)g(x, u) = 0 (Theorem 2.1, Case 1). Moreover, if g is dissipative and gamma infinity then we obtain a Dirichlet an boundary condition (Theorem 2.1, Case 2).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work describes the synthesis, characterization, and the thermal behavior investigation of four palladium(II) complexes with general formulae [PdX(2)(mba)(2)], in which mba = N-methylbenzylamine and X = OAc(-) (1), Cl(-) (2), Br(-) (3) or I(-) (4). The complexes were characterized by elemental analysis, infrared vibrational spectroscopy, and (1)H nuclear magnetic resonance. The stoichiometry of the complexes was established by means of elemental analysis and thermogravimetry (TG). TG/DTA curves showed that the thermodecomposition of the four complexes occurred in 3-4 steps, leading to metallic palladium as final residue. The palladium content found in all curves was in agreement with the mass percentages calculated for the complexes. The following thermal stability sequence was found: 3 > 2 > 4 > 1. The geometry optimization of 1, 2, 3, and 4, calculated using the DFT/B3LYP method, yielded a slightly distorted square planar environment around the Pd(II) ion made by two anionic groups and two nitrogen atoms from the mba ligand (N1 and N2), in a trans-relationship.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A resistência mecânica à penetração apresentada pelo solo exerce grande influência sobre o desenvolvimento vegetal, uma vez que o crescimento das raízes, assim como o rendimento das culturas, varia de forma inversamente proporcional ao seu valor. No ano agrícola de 2001/2002, na Fazenda Experimental de Ensino e Pesquisa da Faculdade de Engenharia/UNESP - Campus de Ilha Solteira, foram analisados o rendimento de grãos do feijoeiro (PG) e a resistência mecânica à penetração (R), de um Latossolo Vermelho distrófico. O objetivo foi apurar diretrizes relacionadas com o aumento da produtividade agrícola em questão, estudando a correlação linear e a espacial entre a PG e a R. Foi instalada uma rede geoestatística para a coleta dos dados do solo e da planta, estabelecida com espaçamentos de 5 x 5 m e 2,5 x 2,5 m, que continham 120 pontos amostrais distribuídos numa área de 1.875 m². A correlação linear entre a PG e a R foi praticamente nula, uma vez que, dependendo das profundidades estudadas do solo, apresentou coeficientes de correlação (r) menores do que 0,20. A análise geoestatística apresentou boa estrutura de dependência espacial, tanto para a PG quanto para a R, quando analisadas isoladamente. Entretanto, a análise espacial conjunta de tais atributos apresentou-se inconsistente. Assim, com o aumento da resistência mecânica à penetração, em determinada região do solo ocorreu ora aumento, ora diminuição do rendimento de grãos do feijoeiro.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Os comprimentos das peças que constituem o aparelho bucal, glossa, paraglossa, estipite, gálea, palpo labial, palpo maxilar, cardo, lorum, mento e pré-mento foram estudados a nível unidimensional em abelhas caucasianas, africanizadas e nos descendentes F1. Somente a paraglossa, estipite, gálea, palpo maxilar, mento e pré-mento mostraram ser diferentes entre esses 2 tipos de abelhas. Essas 6 variáveis foram estudadas nos descendentes F1, tendo sido utilizados 2 tipos de cruzamentos: rainhas caucasianas x machos africanizados (cruzamento 1) e rainhas africanizadas x machos caucasianos (cruzamento 2). Análises multidimensionais também foram realizadas, tendo sido obtidas as distâncias generalizadas de Mahalanobis (D2) entre os parentais e os descendentes F1. Tanto nas análises unidimensionais como nas multidimensionais houve aparente dominância das abelhas africanizadas, mas o número de genes não pôde ser conhecido porque só havia a geração F1 e não houve controle da heterozigosidade das 2 colônias parentais. Os cálculos dos coeficientes de correlações de Spearman mostraram que as abelhas com glossae mais longas coletaram mais xarope de açúcar e voaram mais lentamente da colônia para a fonte de alimento.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objetivou-se avaliar o padrão de fermentação e a composição química de silagens de grãos úmidos de milho e de sorgo confeccionadas com ou sem o uso de inoculante microbiano. Avaliou-se, no experimento 1, a silagem de grãos úmidos de milho e, no experimento 2, a silagem de grãos úmidos de sorgo. O material foi ensilado em silos experimentais de PVC (50 cm de comprimento e 100 mm de diâmetro), três por tratamento (tempo de armazenagem, com ou sem inoculante) para cada grão. Amostras foram tomadas antes (0) e aos 1, 2, 3, 4, 8, 16, 32 e 64 dias após a ensilagem, totalizando 48 silos experimentais para cada grão. Os tratamentos foram arranjados em delineamento inteiramente casualizado, em esquema fatorial 2 x 9 (com e sem inoculante microbiano, nove tempos de armazenagem), com três repetições para cada grão. Não houve efeito da inoculação e do tempo pós-ensilagem sobre o teor de MS dos grãos úmidos de milho e de sorgo, com médias de 64,13 e 64,03% e de 67,66 e 67,48% para silagens controle e inoculadas, respectivamente. Não houve efeito da inoculação sobre o pH dos grãos úmidos de milho e de sorgo aos 64 dias após ensilagem, com médias de 3,97 e 3,92 e de 3,94 e 3,95 unidades para silagens controle e inoculadas, respectivamente. O inoculante microbiano não promoveu alterações na composição química nem redução de perdas da MS nas silagens de grãos úmidos de milho e de sorgo. Nas condições estudadas, não é necessária inoculação para melhoria nos padrões fermentativos de silagens de grãos úmidos de milho e de sorgo.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

An approximate analytical expression for the first two eigenvalues of the Schrodinger equation for the potential V(x) = Ax(4) + Bx(2) is achieved by using the Symanzik scaling symmetry. A kind of symmetry restoration when one of the potential parameters changes conveniently is observed. (C) 2000 Published by Elsevier B.V. B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

LiNbO3 thin films were grown on (0001) sapphire substrates by a chemical route, using the polymeric precursor method. The overall process consists of preparing a coating solution from the Pechini process, based on metallic citrate polymerization, the precursor films, deposited by dip coating, are then heat treated to eliminate the organic material and to synthesize the phase. In this work, we studied the influence of the heat treatment on the structural and optical properties of single-layered films. Two routes were also investigated to increase the film thickness: increasing the viscosity of the coating solution and/or increasing the number of successively deposited layers. The x-ray diffraction theta -2 theta scans revealed the c-axis orientation of the single- and multilayered films and showed that efficient crystallization can be obtained at temperatures as low as 400 degreesC, the phi-scan diffraction evidenced the epitaxial growth with two in-plane variants, A microstructural study revealed that the films were crack free, homogeneous, and relatively dense. Finally, the investigation of the optical properties (optical transmittance and refractive index) confirmed the good quality of the films. These results indicate that the polymeric precursor method is a promising process to develop lithium niobate waveguides.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

MgB2 samples were prepared using as-supplied commercial 96% boron with strong crystalline phase and the same 96% boron (B) after ball milling. The effects of the properties of the starting B powder on the superconductivity were evaluated. We observed that samples using ball-milled 96% B, in comparison with the one made from the as-supplied 96% B, were character- ized by small grain size, broadened full width at half maximum (FWHM), and enhanced magnetic critical current density (J(c)). J(c) reached 2 x 10(3) Acm(-2) at 5 K and 8 T. The improved pinning of these samples seems to be caused by enhanced grain boundary pinning at high field.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The experiment was carried out at Sao Manuel Experimental Farm, Agronomy College, São Paulo State University, Brazil, in a Dark-Red Latosol (loamy sand) to verify oat (Avena strigosa Schreber) rooting patterns under different plant populations (1,5 x 10(6) and 2.5 x 106 plants/ha) and row spacings (0.20 and 0.30 m.). Soil and roots were sampled 81 days after planting, at bloom stage. Cylindrical cores with 2.6 cm diameter were taken from soil depths of 0-10, 10-20, 20-40 and 40-60 cm. At the same time, plant canopies where also sampled to determine the dry weight. Soil analysis showed P to be concentrated in the upper 10 cm whereas the bases were uniform in the profile. There was a high root concentration in the 0-10 cm layer (9.9 to 13.0 cm/cm3 under the row and 10.0 to 11.5 cm/cm2 in the inter-row), which was not related to chemical characteristics of the soil. There was no effect of plant population or row spacing on oat root distribution or growth in the soil profile.