Ansiedade no climatério: prevalência e fatores associados

Este estudo estimou a prevalência de ansiedade e caracterizou os possíveis fatores associados em 749 mulheres no climatério, cadastradas no Programa de Saúde da Família e integrantes do Projeto de Saúde de Pindamonhangaba (PROSAPIN). Trata-se de um estudo observacional transversal; o método consistiu na aplicação de um questionário auto-referido, contendo variáveis sócio-demográficas, de ansiedade e antropometria. A análise estatística foi feita pela distribuição de freqüências e Odds Ratio (intervalo de confiança de 95%), considerando o nível de significância em p< 0,05. Os resultados mostraram que a prevalência de ansiedade foi de 49,8% (IC 95%: 46,2 a 53,4) e, entre os principais fatores associados à ansiedade destacaram-se a escolaridade (OR:1,20 p=0,005), atividade remunerada (OR:0,68 p=0,001) e o período da transição menopausal (OR:1,21 p=0,003). Em conclusão, a ansiedade foi muito prevalente, atingindo quase metade da população estudada e os principais fatores associados à ansiedade foram os hábitos de vida e as condições socioeconômicas

Inspeção sanitária em creches: uma proposta de roteiro de inspeção

O trabalho apresenta um projeto de intervenção na realidade concreta das ações de Vigilância Sanitária, através da proposição de um roteiro para inspeção destinado a creches. Os objetivos específicos foram identificar os fundamentos jurídicos, técnico-científicos e sanitários que possam nortear a prática de inspeções sanitárias em creches; elaborar uma proposta de roteiro que permita um processo de análise mais explícito, objetivo e homogêneo e discutir a contribuição do instrumento proposto para a atividade de Vigilância Sanitária, com base na literatura científica pesquisada. Para a realização do trabalho foi feita uma revisão fundamentada em textos didáticos e normativos das áreas de educação e saúde, legislação sobre Vigilância Sanitária e Educação Infantil, outros roteiros já existentes e artigos da literatura científica sobre agravos à saúde em crianças que frequentam creches. O trabalho focaliza o conteúdo da legislação específica vigente e sua aplicabilidade na prática da inspeção sanitária em creches e baseia-se na Portaria - MS n. 321 de 26.05.1988. Este estudo apresenta um instrumento para avaliar a qualidade do atendimento nas creches sob o aspecto da promoção da saúde e sugere estudos posteriores de validação para o contexto, com a possível inclusão de um sistema de classificação para os padrões de conformidade, por meio de uma metodologia estatística

Arqueologia das práticas editoriais: 15 anos de um impresso em Movimento

The paper studies the archeology of editorial practices of the journal Movimento regarding the processes of editing, diffusion, circulation and adaptation to the index agencies. It reveals the phases of the printed material emphasizing the choices of the editors with reference to the graphical project of the periodic that puts in circulation different devices of regulation of the appropriations, at the same time when it aims at creating an identity that qualifies the periodic as an authorized gadget able to show the readers what Physical Education is in Brazil.

Estudo da massa específica básica e da variação dimensional da madeira de três espécies de eucalipto para a indústria moveleira

The utilization of wood from reforested species by the furniture industry is a recent trend. Thus, the present study determined the specific gravity and shrinkage of wood of 18-year-old Eucalyptus grandis, Eucalyptus dunnii and Eucalyptus urophylla, for use as components in solid wood furniture making. The tests to evaluate the specific gravity and shrinkage of wood in the radial and axial variation of the eucalyptus trees were performed according to NBR 7190/96. The results of the analysis of wood from eucalypt species were subjected to the Homogeneity Test, ANOVA, Tukey and Pearson correlation and compared to the performance of sucupira wood (Bowdichia nitida) and cumaru wood (Dipteryx odorata), often used in the furniture industry. The following results were found: Eucalyptus grandis had a lower value of shrinkage, being more suitable for furniture components that require high dimensional stability, as well as parts of larger surface. The wood of this species showed a rate of dimensional variation compatible with the native species used in the furniture industry. The radial variation of the wood was also verified, and a high correlation between specific gravity and shrinkage was found. Longitudinally, the base of the trunk of the eucalyptus trees was shown to be the region of greatest dimensional stability.

Efeito da aplicação de fertilização nitrogenada e lodo de esgoto nas características da madeira juvenil de árvores de Eucalyptus grandis

This work evaluated the wood anatomical and physical characteristics of 24 months-old Eucalyptus grandis trees, planted in 3x2m spacing and fertilized with nitrogen (6, 12, 18 month old) and sewage sludge (planting, 8 month old). For each treatment 10 eucalypts trees were cut according to the distribution of basal area. Wood samples were collected in different percentages of the total height to analyze the anatomical (vessels and fibers) and physical (wood density) characteristics. The results showed that the wood apparent density and wood basic density of the eucalypt trees in the nitrogen and sewage sludge were larger in comparison to the control. Radial profiles of wood apparent density, were similar in the three treatments, presenting the exected characteristics of juvenile wood of 24 months-old eucalypt trees. Fiber and vessel dimensions were not affected by fertilization.

Glulam beams reinforced with FRP externally-bonded: theoretical and experimental evaluation

The glued- laminated lumber (glulam) technique is an efficient process for the rational use of wood. Fiber-reinforced polymer (FRPs) associated with glulam beams provide significant improvements in strength and stiffness and alter the failure mode of these structural elements. In this context, this paper presents guidance for glulam beam production, an experimental analysis of glulam beams made of Pinus caribea var. hondurensis species without and with externally-bonded FRP and theoretical models to evaluate reinforced glulam beams (bending strength and stiffness). Concerning the bending strength of the beams, this paper aims only to analyze the limit state of ultimate strength in compression and tension. A specific disposal was used in order to avoid lateral buckling, once the tested beams have a higher ratio height-to-width. The results indicate the need of production control so as to guarantee a higher efficiency of the glulam beams. The FRP introduced in the tensile section of glulam beams resulted in improvements on their bending strength and stiffness due to the reinforcement thickness increase. During the beams testing, two failure stages were observed. The first was a tensile failure on the sheet positioned under the reinforcement layer, while the second occurred as a result of a preliminary compression yielding on the upper side of the lumber, followed by both a shear failure on the fiber-lumber interface and a tensile failure in wood. The model shows a good correlation between the experimental and estimated results.

Can Eucalyptus invade native forest fragments close to commercial stands?

Some Eucalyptus species are widely used as a plantation crop in tropical and subtropical regions. One reason for this is the diversity of end uses, but the main reason is the high level of wood production obtained from commercial plantings. With the advancement of biotechnology it will be possible to expand the geographical area in which eucalypts can be used as commercial plantation crops, especially in regions with current climatic restrictions. Despite the popularity of eucalypts and their increasing range, questions still exist, in both traditional planting areas and in the new regions: Can eucalypts invade areas of native vegetation, causing damage to natural ecosystems biodiversity? The objective of this study it was to assess whether eucalypts can invade native vegetation fragments in proximity to commercial stands, and what factors promote this invasive growth. Thus, three experiments were established in forest fragments located in three different regions of Brazil. Each experiment was composed of 40 plots (1 m(2) each one), 20 plots located at the border between the forest fragment and eucalypts plantation, and 20 plots in the interior of the forest fragments. In each experimental site, the plots were paired by two soil exposure conditions, 10 plots in natural conditions and 10 plots with soil exposure (no plant and no litter). During the rainy season, 2 g of eucalypts seeds were sown in each plot, including Eucalyptus grandis or a hybrid of E. urophylla x E. grandis, the most common commercial eucalypt species planted in the three region. At 15, 30, 45, 90, 180, 270 and 360 days after sowing, we assessed the number of seedlings of eucalypts and the number of seedlings of native species resulting from natural regeneration. Fifteen days after sowing, the greatest number of eucalypts seedlings (37 m(-2)) was observed in the plots with lower luminosity and exposed soil. Also, for native species, it was observed that exposed soil improved natural germination reaching the highest number of 163 seedlings per square meter. Site and soil exposure were the factors that have the greatest influence on seed germination of both eucalypt and native species. However, 270 days after sowing, eucalypt seedlings were not observed at any of the three experimental sites. The result shows the inability of eucalypts to adapt to condition outside of their natural range. However, native species demonstrated their strong capacity for natural regeneration in forest fragments under the same conditions where eucalypts were seeded. (C) 2011 Elsevier B.V. All rights reserved.

Production and carbon allocation in a clonal Eucalyptus plantation with water and nutrient manipulations

We examined resource limitations on growth and carbon allocation in a fast-growing, clonal plantation of Eucalyptus grandis x urophylla in Brazil by characterizing responses to annual rainfall, and response to irrigation and fertililization for 2 years. Productivity measures included gross primary production (GPP), total belowground carbon allocation (TBCA), bole growth, and net ecosystem production (NEP). Replicate plots within a single plantation were established at the midpoint of the rotation (end of year 3), with treatments of no additional fertilization or irrigation, heavy fertilization (to remove any nutrient limitation), irrigation (to remove any water limitation), and irrigation plus fertilization. Rainfall was unusually high in the first year (1769mm) of the experiment, and control plots had high rates of GPP (6.64 kg C m(-2) year(-1)), TBCA (2.14 kg C m(-2) year(-1)), and bole growth (1.81 kg C m(-2) year). Irrigation increased each of these rates by 15-17%. The second year of the experiment had average rainfall (1210 mm), and lower rainfall decreased production in control plots by 46% (GPP), 52% (TBCA), and 40% (bole growth). Fertilization treatments had neglible effects. The response to irrigation was much greater in the drier year, with irrigated plots exceeding the production in control plots by 83% (GPP), 239% (TBCA), and 24% (bole growth). Even though the rate of irrigation ensured no water limitation to tree growth, the high rainfall year showed higher production in irrigated plots for both GPP (38% greater than in drier year) and bole growth (23% greater). Varying humidity and supplies of water led to a range in NEP of 0.8-2.7 kg C m(-2) year. This difference between control and irrigated treatments, combined with differences between drier and wetter years, indicated a strong response of these Eucalyptus trees to both water supply and atmospheric humidity during the dry season. The efficiency of converting light energy into fixed carbon ranged from a low of 0.027 mol C to a high of 0.060 mol C per mol of absorbed photosynthetically active radiation (APAR), and the efficiency of bolewood production ranged from 0.78 to 1.98 g wood per MJ of APAR. Irrigation increased the efficiency of wood production per unit of water used from 2.55 kg wood m(-3) in the rainfed plot to 3.51 kg m(-3) in irrigated plots. Detailed information on the response of C budgets to environmental conditions and resource supplies will be necessary for accurate predictions of plantation yields across years and landscapes. (V) 2007 Elsevier B.V. All rights reserved.

The Rural Clinical Division: a student journey to rural medicine

Background: The University of Queensland has through an Australian Government initiative, established a Rural Clinical Division (RCD) at four regional sites in the southern and central Queensland. Over the fi rst four years of the existence of the RCD, an integrated package of innovative medical education has been developed. Method: The integrated aspects of the RCD program include: The Rural Medical Rotation: Every medical student undertakes an eight week rural rotation in Year 3. Year 3 and 4 MBBS - 100 students are currently spending one to two years in the rural school and demand is increasing. Interprofessional Education - Medical and Allied Health students attend lectures, seminars and workshops together and often share the same rural clinical placement. Rural health projects - allow students to undertake a project of benefi t to the rural community. Information Technology (IT) - the Clinical Discussion Board (CDB) and Personal Digital Assistants (PDA) demonstrate the importance of IT to medical students in the 21st century. Changing the Model of Medical Education - The Leichhardt Community Attachment Placement (LCAP), is a pilot study that resulted in the addition of three interns to the rural workforce. All aspects of the RCD are evaluated with surveys using both qualitative and quantitative free response questions, completed by all students regularly throughout the academic year. Results: Measures of impact include: Student satisfaction and quality of teaching surveys – 86-91% of students improved their clinical skills and understanding across all rotations. Academic results and progress – RCD students out-perform their urban colleagues. Intent to work in rural areas – 90% of students reported a greater interest in rural medicine. Intern numbers – rural / regional intern placements are increasing. Conclusions: The RCD proves to be a site for innovations all designed to help reach our primary goal of fostering increased recruitment of a rural medical workforce.

Plant growth limitation and nutrient loss following piled burning in slash and burn agriculture

In the forest zone of Cameroon, small-scale family farmers practicing traditional slash and burn practices achieve a clear field by piled burning of the branches and trunks of cleared vegetation. Plant growth inhibition on ash patches, and the risk of nutrient loss from these areas, was evaluated on field plots on which 0.5 t m(-2) or 1.0 t m(-2) of wood was piled and burnt, and in laboratory studies. The ash produced by burning was strongly alkaline, and laboratory bio-assessment studies showed that the saline, high pH conditions produced in ash patches prevented germination and plant growth for up to two wet seasons, as is observed in the field. Field and laboratory studies demonstrated rapid release (1 wet season) of K and S from the ash and the loss of a substantial portion of these nutrients from the soil profile by leaching. In contrast, leaching carries Mg from the ash gradually (3 to 4 wet seasons), while Ca, Cu, Zn and P are leached slowly. The nutrients contained in ash patches are considered at risk of loss both through leaching (K and S) and by erosion of ash (Ca, Mg, Cu, Zn and P). Farmers should be encouraged to spread ash patches prior to cultivation in order to exploit the nutrient content of ash and to lessen the risk of nutrient loss.

Les mots font leurs besognes: Informe as high-low hybridity on board the Ville-de-Montereau

This article links Flaubert's L'Education sentimentale and the aesthetic project of which it is a part to Bataille's concept of 'informe', and associated notions of hybridity and materiality.

Critical cyber pedagogy: Doing multiliteracies in the Singapore classrooms

The Ministry of Education in Singapore has embarked on the ambitious project of introducing IT in schools. The IT Masterplan, budgeted at a cost of $2 billion, aims to wire up all schools by the year 2002. While the well-funded IT Masterplan is seeing the project in its final phase of implementation, this paper argues for a "critical cyber pedagogy" along with the acquisition of the functional and operational skills of technology. Drawing on theories of critical multiliteracies (Burbules & Callister, 2000; Luke, 2000b; New London Group, 1996), this paper explores and suggests how an instructional design of two classroom activities can be utilized as new forms of cyber and technoliteracies. Through the critical evaluation of websites and hypertext construction, students will be equipped with a new literacy that extends reading and writing by incorporating new blended forms of hybrid textualities. This technology-assisted pedagogy can achieve the desired outcome of self-directed learning, teamwork, critical thinking and problem solving strategies necessary for a knowledge-based society.

Forma????o de carreiras para a gest??o p??blica contempor??nea: o caso dos especialistas em pol??ticas p??blicas e gest??o governamental

O artigo analisa o curso de forma????o inicial para a carreira de Especialista em Pol??ticas P??blicas e Gest??o Governamental (EPPGG), recentemente reformulado. Conclui-se que as mudan??as realizadas no curso, tendo em vista os problemas enfrentados em edi????es anteriores, os desafios contempor??neos da administra????o p??blica, a crescente complexidade dos problemas e as demandas da sociedade, proporcionaram respostas bastante adequadas. No entanto, persistem in??meros desafios, dentre os quais se destacam o aprimoramento do ensino de aplica????o e novas tecnologias. Ao longo das nove edi????es do curso, percebe-se que os principais objetivos do projeto inicial da carreira permaneceram, mesmo com todas as descontinuidades administrativas. Preservaram-se o perfil generalista e as policompet??ncias na forma????o do EPPGG, a fim de permitir ao profissional uma vis??o abrangente e integrada dos complexos problemas da administra????o p??blica e desenvolver a capacidade de analisar, decidir e buscar os melhores resultados em prol do cidad??o, conduzindo as rela????es e as atividades profissionais de acordo com os princ??pios da ??tica p??blica.

Perfil das condi????es de sa??de das capitais brasileiras na perspectiva dos Objetivos de Desenvolvimento do Mil??nio (ODM)

No contexto atual, o uso de indicadores sociais na avalia????o das pol??ticas p??blicas tem se tornado cada vez maior. Os indicadores sociais tamb??m t??m sido implementados no acompanhamento dos Objetivos de Desenvolvimento do Mil??nio (ODM), projeto da Organiza????o das Na????es Unidas (ONU) em que v??rios pa??ses, inclusive o Brasil, firmaram um pacto para tornar o mundo menos desigual. Sendo assim, para avaliar o cumprimento das metas estabelecidas nos ODM, este artigo pretende delinear perfis das capitais brasileiras quanto ??s condi????es de sa??de, sob a perspectiva dos ODM, a fim de contribuir para a formula????o e avalia????o de pol??ticas p??blicas e indicar um caminho para a escolha de indicadores importantes de serem monitorados. Foram delineados perfis, com a ado????o do m??todo Grade of Membership, quanto ?? sa??de nas capitais brasileiras. Perante os resultados obtidos, pode-se dizer que as condi????es de sa??de nas capitais brasileiras apresentam forte vi??s regional.

Estudo de algumas propriedades mecânicas da madeira de um híbrido clonal de Eucalyptus urophylla X Eucalyptus grandis

A procura por madeiras oriundas de reflorestamentos destinadas à serraria é uma realidade já há muitos anos, principalmente aquelas das espécies do gênero Eucalyptus. Visando buscar novas informações importantes para esse mercado, este trabalho objetivou determinar algumas propriedades mecânicas da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis de duas idades e provenientes de talhadia simples e de reforma. Os resultados indicaram que a madeira desse híbrido apresenta boas características tecnológicas, destacando-se a segunda tora (a partir de 3 m) com as melhores propriedades de flexão estática (Módulo de Elasticidade - MOE e Módulo de Ruptura - MOR) e Compressão Axial das fibras. As árvores de maior idade (166 meses) e que sofreram dois desbastes apresentaram as melhores propriedades de flexão estática e compressão axial.