The Impact of a Classroom Performance System on Learning Gains in a Biology Course for Science Majors

This study was conducted to determine if the use of the technology known as Classroom Performance System (CPS), specifically referred to as “Clickers”, improves the learning gains of students enrolled in a biology course for science majors. CPS is one of a group of developing technologies adapted for providing feedback in the classroom using a learner-centered approach. It supports and facilitates discussion among students and between them and teachers, and provides for participation by passive students. Advocates, influenced by constructivist theories, claim increased academic achievement. In science teaching, the results have been mixed, but there is some evidence of improvements in conceptual understanding. The study employed a pretest-posttest, non-equivalent groups experimental design. The sample consisted of 226 participants in six sections of a college biology course at a large community college in South Florida with two instructors trained in the use of clickers. Each instructor randomly selected their sections into CPS (treatment) and non-CPS (control) groups. All participants filled out a survey that included demographic data at the beginning of the semester. The treatment group used clicker questions throughout, with discussions as necessary, whereas the control groups answered the same questions as quizzes, similarly engaging in discussion where necessary. The learning gains were assessed on a pre/post-test basis. The average learning gains, defined as the actual gain divided by the possible gain, were slightly better in the treatment group than in the control group, but the difference was statistically non-significant. An Analysis of Covariance (ANCOVA) statistic with pretest scores as the covariate was conducted to test for significant differences between the treatment and control groups on the posttest. A second ANCOVA was used to determine the significance of differences between the treatment and control groups on the posttest scores, after controlling for sex, GPA, academic status, experience with clickers, and instructional style. The results indicated a small increase in learning gains but these were not statistically significant. The data did not support an increase in learning based on the use of the CPS technology. This study adds to the body of research that questions whether CPS technology merits classroom adaptation.

Use of Fiber Reinforced Polymer Composite Cable for Post-tensioning Application

Corrosion of steel tendons is a major problem for post-tensioned concrete, especially because corrosion of the steel strands is often hard to detect inside grouted ducts. Non-metallic tendons can serve as an alternative material to steel for post-tensioning applications. Carbon fiber reinforced polymer (CFRP), given its higher strength and elastic modulus, as well as excellent durability and fatigue strength, is the most practical option for post-tensioning applications. The primary objective of this research project was to assess the feasibility of the use of innovative carbon fiber reinforced polymer (CFRP) tendons and to develop guidelines for CFRP in post-tensioned bridge applications, including segmental bridges and pier caps. An experimental investigation and a numerical simulation were conducted to compare the performance of a scaled segmental bridge model, post-tensioned with two types of carbon fiber strands and steel strands. The model was tested at different prestress levels and at different loading configurations. While the study confirms feasibility of both types of carbon fiber strands for segmental bridge applications, and their similar serviceability behavior, strands with higher elastic modulus could improve structural performance and minimize displacements beyond service loads. As the second component of the project, a side-by-side comparison of two types of carbon fiber strands against steel strands was conducted in a scaled pier cap model. Two different strand arrangements were used for post-tensioning, with eight and six strands, respectively representing an over-design and a slight under-design relative to the factored demand. The model was tested under service and factored loads. The investigation confirmed the feasibility of using carbon fiber strands in unbonded post-tensioning of pier caps. Considering both serviceability and overload conditions, the general performance of the pier cap model was deemed acceptable using either type of carbon fiber strands and quite comparable to that of steel strands. In another component of this research, creep stress tests were conducted with carbon fiber composite cable (CFCC). The anchorages for all the specimens were prepared using a commercially available expansive grout. Specimens withstood 95% of the guaranteed capacity provided by the manufacturer for a period of five months, without any sign of rupture.

The Survival and Stock Performance of Emerging Country Firms in the United States

Many firms from emerging markets flocked to developed countries at high cost with hopes of acquiring strategic assets that are difficult to obtain in home countries. Adequate research has focused on the motivations and strategies of emerging country firms' (ECFs') internationalization, while limited studies have explored their survival in advanced economies years after their venturing abroad. Due to the imprinting effect of home country institutions that inhibit their development outside their home market, ECFs are inclined to hire executives with international background and affiliate to world-wide organizations for the purpose of linking up with the global market, embracing multiple perspectives for strategic decisions, and absorbing the knowledge of foreign markets. However, the effects of such orientation on survival are under limited exploration. Motivated by the discussion above, I explore ECFs’ survival and stock performance in a developed country (U.S.). Applying population ecology, signaling theory and institutional theory, the dissertation investigates the characteristics of ECFs that survived in the developed country (U.S.), tests the impacts of global orientation on their survival, and examines how global-oriented activities (i.e. joining United Nations Global Compact) affect their stock performance. The dissertation is structured in the form of three empirical essays. The first essay explores and compares different characteristics of ECFs and developed country firms (DCFs) that managed to survive in the U.S. The second essay proposes the concept of global orientation, and tests its influences on ECFs’ survival. Employing signaling theory and institutional theory, the third essay investigates stock market reactions to announcements of United Nation Global Compact (UNGC) participation. The dissertation serves to explore the survival of ECFs in the developed country (U.S.) by comparison with DCFs, enriching traditional theories by testing non-traditional arguments in the context of ECFs’ foreign operation, and better informing practitioners operating ECFs about ways of surviving in developed countries and improving stockholders’ confidence in their future growth.

The Relationship of Instructor Technical Literacy to the Academic Performance of Students in Career Academies

Career Academy instructors’ technical literacy is vital to the academic success of students. This nonexperimental ex post facto study examined the relationships between the level of technical literacy of instructors in career academies and student academic performance. It was also undertaken to explore the relationship between the pedagogical training of instructors and the academic performance of students. Out of a heterogeneous population of 564 teachers in six targeted schools, 136 teachers (26.0 %) responded to an online survey. The survey was designed to gather demographic and teaching experience data. Each demographic item was linked by researchers to teachers’ technology use in the classroom. Student achievement was measured by student learning gains as assessed by the reading section of the FCAT from the previous to the present school year. Linear and hierarchical regressions were conducted to examine the research questions. To clarify the possibility of teacher gender and teacher race/ethnic group differences by research variable, a series of one-way ANOVAs were conducted. As revealed by the ANOVA results, there were not statistically significant group differences in any of the research variables by teacher gender or teacher race/ethnicity. Greater student learning gains were associated with greater teacher technical expertise integrating computers and technology into the classroom, even after controlling for teacher attitude towards computers. Neither teacher attitude toward technology integration nor years of experience in integrating computers into the curriculum significantly predicted student learning gains in the regression models. Implications for HRD theory, research, and practice suggest that identifying teacher levels of technical literacy may help improve student academic performance by facilitating professional development strategies and new parameters for defining highly qualified instructors with 21st century skills. District professional development programs can benefit by increasing their offerings to include more computer and information communication technology courses. Teacher preparation programs can benefit by including technical literacy as part of their curriculum. State certification requirements could be expanded to include formal surveys to assess teacher use of technology.

Engineering interfacial silicon dioxide for improved metal-insulator-semiconductor silicon photoanode water splitting performance

Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits hole conduction from the photoabsorbing substrate to the surface oxygen evolution catalyst. Herein, we report a significant reduction of bilayer resistance, achieved by forming stable, ultrathin (<1.3 nm) SiO2 layers, allowing fabrication of water splitting photoanodes with hole conductances near the maximum achievable with the given catalyst and Si substrate. Three methods for controlling the SiO2 interlayer thickness on the Si(100) surface for ALD-TiO2 protected anodes were employed: (1) TiO2 deposition directly on an HF-etched Si(100) surface, (2) TiO2 deposition after SiO2 atomic layer deposition on an HF-etched Si(100) surface, and (3) oxygen scavenging, post-TiO2 deposition to decompose the SiO2 layer using a Ti overlayer. Each of these methods provides a progressively superior means of reliably thinning the interfacial SiO2 layer, enabling the fabrication of efficient and stable water oxidation silicon anodes.

Does high intensity squatting elicit post activation potentiation in the squat?

The phenomenon post activation potentiation (PAP) can be defined as an increase in muscle performance following a heavy contraction of a movement that utilizes the same muscle group (i.e. improved 20m sprint following a high intensity squat). However, research has yet to examine if heavy squats elicit PAP on the squat itself. Further, past studies have not yet analyzed if PAP is elicited at a moderate intensity (i.e. 60% one-repetition maximum-1RM).

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

Medición de la cultura de seguridad del paciente en un hospital público de primer nivel en el municipio de Villeta

Esta investigación midió la percepción del personal asistencial sobre la cultura de seguridad de los pacientes en un hospital de primer nivel de complejidad por medio de un estudio descriptivo de corte transversal. Se utilizó como herramienta de medición la encuesta ‘Hospital Survey on Patient Safety Cultura’ (HSOPSC) de la Agency of Healthcare Research and Quality (AHRQ) versión en español, la cual evalúa doce dimensiones. Los resultados mostraron fortalezas como el aprendizaje organizacional, las mejoras continuas y el apoyo de los administradores para la seguridad del paciente. Las dimensiones clasificadas como oportunidades de mejora fueron la cultura no punitiva, el personal, las transferencias y transiciones y el grado en que la comunicación es abierta. Se concluyó que aunque el personal percibía como positivo el proceso de mejoramiento y apoyo de la administración también sentía que era juzgado si reportaba algún evento adverso.

Índice acumulativo de riesgo (nice) como prueba diagnóstica con base en tomografía corneal por elevación en la prevención de ectasia corneal post-lasik

Antecedentes La ectasia corneal post-lasik (ECPL) es una complicación infrecuente, pero devastadora en la cirugía lasik (queratomileusis asistida con éxcimer láser) para el tratamiento de la miopía con o sin astigmatismo. Con base en la tomografía corneal por elevación por imágenes de Scheimpflug (Sistema Pentacam HR, Oculus Wetzlar, Alemania), se propone un novedoso índice acumulativo de riesgo para ser utilizado como prueba diagnóstica de tamizaje y así prevenir esta complicación. Metodología Se realizó un estudio observacional analítico, de corte transversal tipo pruebas diagnósticas, con el fin de evaluar las características operativas del índice NICE teniendo como estándar de referencia el módulo de Belin-Ambrosio (Pentacam HR) utilizando un modelo de regresión logística binaria, tablas de contingencia y estimando el área bajo la curva ROC. Resultados Se evaluaron 361 ojos de los cuales el 59,3% provenían de pacientes de sexo femenino, la edad media global fue de 30 años (RIC 11,0). El modelo logístico binario aplicado se construyó con base en cuatro variables independientes cuantitativas (K2, PAQUI, EP e I-S) y una cualitativa (SEXO), y se determinó su relación con la variable dependiente, NICE (puntaje final). Las variables predictoras fueron estadísticamente significativas clasificando adecuadamente el 92,9% de los ojos evaluados según presencia o ausencia de riesgo. El coeficiente de Nagelkerke fue de 74,4%. Conclusiones El índice acumulativo de riesgo NICE es una herramienta diagnóstica novedosa en la evaluación de candidatos a cirugía refractiva lasik para prevenir la ectasia secundaria.

Optimization and validation of an analytical method for determination of glyphosate and AMPA in apples using SPE-HPLC with post-column derivatization.

2008

High performance and energy-efficient instruction cache design and optimisation for ultra-low-power multi-core clusters

High Energy efficiency and high performance are the key regiments for Internet of Things (IoT) end-nodes. Exploiting cluster of multiple programmable processors has recently emerged as a suitable solution to address this challenge. However, one of the main bottlenecks for multi-core architectures is the instruction cache. While private caches fall into data replication and wasting area, fully shared caches lack scalability and form a bottleneck for the operating frequency. Hence we propose a hybrid solution where a larger shared cache (L1.5) is shared by multiple cores connected through a low-latency interconnect to small private caches (L1). However, it is still limited by large capacity miss with a small L1. Thus, we propose a sequential prefetch from L1 to L1.5 to improve the performance with little area overhead. Moreover, to cut the critical path for better timing, we optimized the core instruction fetch stage with non-blocking transfer by adopting a 4 x 32-bit ring buffer FIFO and adding a pipeline for the conditional branch. We present a detailed comparison of different instruction cache architectures' performance and energy efficiency recently proposed for Parallel Ultra-Low-Power clusters. On average, when executing a set of real-life IoT applications, our two-level cache improves the performance by up to 20% and loses 7% energy efficiency with respect to the private cache. Compared to a shared cache system, it improves performance by up to 17% and keeps the same energy efficiency. In the end, up to 20% timing (maximum frequency) improvement and software control enable the two-level instruction cache with prefetch adapt to various battery-powered usage cases to balance high performance and energy efficiency.

Design and testing of innovative, artificial intelligence-based techniques to model and control the combustion process and to reduce the Co2 emissions in modern, high-performance, gasoline direct injection engines

This work deals with the development of calibration procedures and control systems to improve the performance and efficiency of modern spark ignition turbocharged engines. The algorithms developed are used to optimize and manage the spark advance and the air-to-fuel ratio to control the knock and the exhaust gas temperature at the turbine inlet. The described work falls within the activity that the research group started in the previous years with the industrial partner Ferrari S.p.a. . The first chapter deals with the development of a control-oriented engine simulator based on a neural network approach, with which the main combustion indexes can be simulated. The second chapter deals with the development of a procedure to calibrate offline the spark advance and the air-to-fuel ratio to run the engine under knock-limited conditions and with the maximum admissible exhaust gas temperature at the turbine inlet. This procedure is then converted into a model-based control system and validated with a Software in the Loop approach using the engine simulator developed in the first chapter. Finally, it is implemented in a rapid control prototyping hardware to manage the combustion in steady-state and transient operating conditions at the test bench. The third chapter deals with the study of an innovative and cheap sensor for the in-cylinder pressure measurement, which is a piezoelectric washer that can be installed between the spark plug and the engine head. The signal generated by this kind of sensor is studied, developing a specific algorithm to adjust the value of the knock index in real-time. Finally, with the engine simulator developed in the first chapter, it is demonstrated that the innovative sensor can be coupled with the control system described in the second chapter and that the performance obtained could be the same reachable with the standard in-cylinder pressure sensors.

Multi-performance assessment of a masonry building with a sustainable RC-Framed Skin

Questa tesi si propone di fornire un approccio multidisciplinare per la valutazione delle prestazioni di una tipologia di intervento sostenibile che consiste in un telaio in calcestruzzo armato (RCFramed skin) per la ristrutturazione integrata di edifici esistenti. Viene fornita una descrizione preliminare di tale tecnologia, con particolare attenzione al miglioramento simultaneo delle prestazioni strutturali (sismiche), non strutturali (energetiche) e alle questioni relative alla limitazione dell'invasività e dell'interruzione dell'uso della costruzione. La valutazione delle prestazioni dell'edificio nelle configurazioni pre e post intervento è effettuata, principalmente in termini di capacità sismica, ma anche del comportamento termo-igrometrico. In particolare, i benefici ottenuti sia dal punto di vista strutturale che energetico sono valutati con riferimento a tre diverse città appartenenti a tre differenti zone sismiche e climatiche. La fattibilità e la sostenibilità dell'intervento di adeguamento proposto sono indagate attraverso una valutazione LCA(Life Cycle Assessment) per l'impatto ambientale e LCC(Life Cycle Cost) per l’analisi economica. Infine, viene proposto un metodo per facilitare la selezione della soluzione di intervento ottimale per ogni sito, combinando l'aspetto strutturale con quello energetico, di impatto ambientale ed economico.

L'impatto del COVID-19 sulla performance e sugli infortuni dei podisti. Il ruolo della fisioterapia- Uno studio trasversale

Introduzione: Il COVID-19 colpisce vari apparati e il meccanismo di diffusione non è noto. La quarantena durante la malattia inoltre costringe alla sedentarietà con ripercussioni fisiche e psicologiche. Lo studio indaga se il COVID-19 possa avere un’influenza sugli infortuni e sulla performance sportiva dei podisti e il ruolo della fisioterapia nella riabilitazione post infortunio. Materiali e metodi: La raccolta dati è avvenuta tramite distribuzione di questionari cartacei e digitali nelle società podistiche italiane dal 2 Marzo al 15 Aprile 2022. I criteri di inclusione erano l’essere maggiorenni, allenarsi almeno 1-2 volte a settimana e comprendere la lingua italiana. Risultati: 245 podisti rispettavano i criteri di inclusione. Negli ultimi 3 anni l’81,63% è incorso in infortunio; per la riabilitazione la maggior parte degli atleti si è rivolta a un fisioterapista e il grado di soddisfazione della riabilitazione è molto alto. Il 45,31% ha contratto il COVID-19 e di questi il 47,74% ha riferito una percezione di diminuzione della performance dopo la malattia, la quale non è influenzata dalla durata dell’interruzione degli allenamenti. Il 48,65% è incorso in infortunio dopo il COVID-19 e il tasso d’infortunio è maggiore rispetto al periodo antecedente al contagio. Non vi è invece differenza tra l’incidenza di infortunio di chi ha contratto il COVID-19 e il restante campione. Conclusione: Il COVID-19 potrebbe non predisporre maggiormente l’atleta a infortunio rispetto alla popolazione generale, ma potrebbe aumentare la sua suscettibilità rispetto al periodo antecedente al contagio. Il percorso riabilitativo più efficace per il recupero è quello intrapreso affidandosi a professionisti sanitari del settore. La malattia per molti ha un impatto molto negativo sulla propria performance, ma questo non dipende dall’interruzione prolungata degli allenamenti e quindi potrebbe non essere dovuto al deallenamento ma a qualche aspetto non ancora indagato in letteratura.

An Efficient Protocol For The Generation Of Monocyte Derived Dendritic Cells Using Serum-free Media For Clinical Applications In Post Remission Aml Patients.

Protocols for the generation of dendritic cells (DCs) using serum as a supplementation of culture media leads to reactions due to animal proteins and disease transmissions. Several types of serum-free media (SFM), based on good manufacture practices (GMP), have recently been used and seem to be a viable option. The aim of this study was to evaluate the results of the differentiation, maturation, and function of DCs from Acute Myeloid Leukemia patients (AML), generated in SFM and medium supplemented with autologous serum (AS). DCs were analyzed by phenotype characteristics, viability, and functionality. The results showed the possibility of generating viable DCs in all the conditions tested. In patients, the X-VIVO 15 medium was more efficient than the other media tested in the generation of DCs producing IL-12p70 (p=0.05). Moreover, the presence of AS led to a significant increase of IL-10 by DCs as compared with CellGro (p=0.05) and X-Vivo15 (p=0.05) media, both in patients and donors. We concluded that SFM was efficient in the production of DCs for immunotherapy in AML patients. However, the use of AS appears to interfere with the functional capacity of the generated DCs.