Design of an integrated platform for V2X wireless communications and positioning supporting C-ITS safety applications

In this paper, an integrated inter-vehicles wireless communications and positioning system supporting alternate positioning techniques is proposed to meet the requirements of safety applications of Cooperative Intelligent Transportation Systems (C-ITS). Recent advances have repeatedly demonstrated that road safety problems can be to a large extent addressed via a range of technologies including wireless communications and positioning in vehicular environments. The novel communication stack utilizing a dedicated frequency spectrum (e.g. at 5.9 GHz band), known as Dedicated Short-Range Communications (DSRC), has been particularly designed for Wireless Access in Vehicular Environments (WAVE) to support safety applications in highly dynamic environments. Global Navigation Satellite Systems (GNSS) is another essential enabler to support safety on rail and roads. Although current vehicle navigation systems such as single frequency Global Positioning System (GPS) receivers can provide route guidance with 5-10 meters (road-level) position accuracy, positioning systems utilized in C-ITS must provide position solutions with lane-level and even in-lane-level accuracies based on the requirements of safety applications. This article reviews the issues and technical approaches that are involved in designing a vehicular safety communications and positioning architecture; it also provides technological solutions to further improve vehicular safety by integrating the DSRC and GNSS-based positioning technologies.

Analysis of temporary traffic control cost items in transportation construction bidding process

Temporary Traffic Control Plans (TCP’s), which provide construction phasing to maintain traffic during construction operations, are integral component of highway construction project design. Using the initial design, designers develop estimated quantities for the required TCP devices that become the basis for bids submitted by highway contractors. However, actual as-built quantities are often significantly different from the engineer’s original estimate. The total cost of TCP phasing on highway construction projects amounts to 6–10% of the total construction cost. Variations between engineer estimated quantities and final quantities contribute to reduced cost control, increased chances of cost related litigations, and bid rankings and selection. Statistical analyses of over 2000 highway construction projects were performed to determine the sources of variation, which later were used as the basis of development for an automated-hybrid prediction model that uses multiple regressions and heuristic rules to provide accurate TCP quantities and costs. The predictive accuracy of the model developed was demonstrated through several case studies.

International entrepreneurship and firm performance over economic crisis

Small and medium firms (SMEs) that operate in global markets are vulnerable to external shocks in uncertain, hostile and volatile business environments given their limited resources and inexperience. In such environments entrepreneurial firms respond by making strategic choices to mitigate such vulnerabilities. This research examines one such important strategic choice – entrepreneurial posturing and its link to financial performance in Finnish SMEs during the global financial crisis. Findings suggest that the dimensions of entrepreneurial posturing have a differential effect on firm performance depending upon the severity of the business environment as well as the firm’s degree of internationalization. Implications for theory and practice are discussed and directions for future research provided.

Is bus overrepresented in Bluetooth MAC Scanner data? Is MAC-ID really unique?

One of the concerns about the use of Bluetooth MAC Scanner (BMS) data, especially from urban arterial, is the bias in the travel time estimates from multiple Bluetooth devices being transported by a vehicle. For instance, if a bus is transporting 20 passengers with Bluetooth equipped mobile phones, then the discovery of these mobile phones by BMS will be considered as 20 different vehicles, and the average travel time along the corridor estimated from the BMS data will be biased with the travel time from the bus. This paper integrates Bus Vehicle Identification system with BMS network to empirically evaluate such bias, if any. The paper also reports an interesting finding on the uniqueness of MAC IDs.

Perceptions of online learning in an Australian university: an international students’ (Asian Region) perspective – enjoyment

Several researchers have reported that cultural and language differences can affect online interactions and communications between students from different cultural backgrounds. Other researchers have asserted that online learning is a tool that can improve teaching and learning skills, but its effectiveness depends on how the tool is used. To delve into these aspects further, this study set out to investigate the kinds of learning difficulties encountered by the international students and how they actually coped with online learning. The modified Online Learning Environment Survey (OLES) instrument was used to collect data from the sample of 109 international students at a university in Brisbane. A smaller group of 35 domestic students was also included for comparison purposes. Contrary to assumptions from previous research, the findings revealed that there were only few differences between the international Asian and Australian students with regards to their perceptions of online learning. Recommendations based on the findings of this research study were made for Australian universities where Asian international students study online. Specifically the recommendations highlighted the importance of upskilling of lecturers’ ability to structure their teaching online and to apply strong theoretical underpinnings when designing learning activities such as discussion forums, and for the university to establish a degree of consistency with regards to how content is located and displayed in a learning management system like Blackboard.

Critical reflections on the use of participatory methodologies to build evaluation capacities in international development organisations

There has been a greater focus on strengthening evaluation capacity building (ECB) within development organisations in recent years. This can be attributed in part to the growing appreciation of the value of participatory and collaborative forms of evaluation. Evaluation is increasingly seen as an ongoing learning process and an important means of strengthening capacity and improving organisational performance (Horton et al., 2003:7). While there are many benefits of using participatory methodologies in ECB projects, our experiences and a review of the literature in this area highlight the many challenges, issues and contradictions that can affect the success of such ECB efforts. We discuss these issues, drawing on our learnings from the ongoing participatory action research (PAR) project 'Assessing Communication for Social Change’ (AC4SC). This four year project, which began in 2007, is a collaboration between communication and development academics and evaluation specialists from two Australian universities and communication for development practitioners and monitoring and evaluation (M&E) staff in the NGO Equal Access Nepal (EAN). The aim is to develop, implement, and evaluate a participatory methodology for assessing the social change impacts of community radio programs produced by EAN. It builds on previous projects that used ethnographic action research (EAR) methodology (Tacchi et al., 2007).

Critical reflections on the use of participatory methodologies to build evaluation capacities in international development organisations

"In this chapter the authors present a critique of Participatory Evaluation as worked in development projects, in this case, in Nepal. The article works between established claims that Participatory Evaluation builds capacity at programmatic and organisational levels, and the specific experiences of these claims in the authors’ current work. They highlight the need to address key difficulties such as high turn-over of staff and resulting loss of capacity to engage in Participatory Evaluation, and the difficulty of communication between academic as compared with local practical wisdoms. A key issue is the challenge of addressing the inevitable issues of power inequities that such approaches encounter. While Participatory Evaluation has been around for some time, it has only enjoyed more widespread recognition of its value in comparatively recent times, with its uptake in international development environments. To this extent, the practice is still in its early stages of development, and Jo, June and Michael’s work contributes to strengthening and more comprehensively understanding it. With regard to the meta-theme of this publication, this chapter is an example of how context not only influences the methodology to be used and the praxis of how it is to be used, but contributes to early explication of the core nature of an emerging methodology."

A flexible optimisation model for the railway crew scheduling problem

Addressing the Crew Scheduling Problem (CSP) in transportation systems can be too complex to capture all details. The designed models usually ignore or simplify features which are difficult to formulate. This paper proposes an alternative formulation using a Mixed Integer Programming (MIP) approach to the problem. The optimisation model integrates the two phases of pairing generation and pairing optimisation by simultaneously sequencing trips into feasible duties and minimising total elapsed time of any duty. Crew scheduling constraints in which the crew have to return to their home depot at the end of the shift are included in the model. The flexibility of this model comes in the inclusion of the time interval of relief opportunities, allowing the crew to be relieved during a finite time interval. This will enhance the robustness of the schedule and provide a better representation of real-world conditions.

Considering a whole-of-community approach to integrating nature in cities, an international case study of Vauban, Germany

Globally, cities face a convergence of complex and rapidly evolving challenges, including climate change, resource shortages, population growth and urbanization, and financial pressures. Biophilic urbanism is an emerging design principle capable of considering the multidimensional and interdependent complexities of urban systems and infrastructure, which through the use of natural design features, can meet society’s inherent need for contact with nature, and assist efforts to respond to these growing challenges. Considering the imperative for addressing these challenges, this paper proposes that significant lessons can be learned from existing examples of biophilic urbanism, avoiding ‘re-invention of the wheel’ and facilitating accelerated innovation in other areas. Vauban is a 38-hectare brownfield development located 3 kilometers from the centre of Germany’s ‘ecological capital’ of Freiburg city. It was developed using an innovative process with strong community participation and reinterpreted developer roles to produce an example of integrated sustainability. Innovation in transport, energy, housing, development and water treatment has enabled a relatively high-density, mixed-use development that integrates a considerable amount of nature. This paper discusses Vauban in light of research undertaken over the last two years through the Sustainable Built Environment National Research Centre in Australia, to investigate emerging elements of ‘biophilic urbanism’ (nature-loving cities), and their potential to be mainstreamed within urban environments. The paper considers the interplay between the policies, community dynamics and innovations in Vauban, within the context of the culture, history and practice of sustainability in Germany, and how these have enabled nature to be integrated into the urban environment of Vauban while achieving other desirable goals for urban areas. It highlights potential applications from Vauban for Australian cities.

Introduction to the first international workshop on process management for highly dynamic and pervasive scenarios(PM4HDPS 2008)

Nowadays, process management systems (PMSs) are widely used in many business scenarios, e.g. by government agencies, by insurance companies, and by banks. Despite this widespread usage, the typical application of such systems is predominantly in the context of static scenarios, instead of pervasive and highly dynamic scenarios. Nevertheless, pervasive and highly dynamic scenarios could also benefit from the use of PMSs.

Engineering education for sustainable development : a review of international progress

Since the late 1980s there have been increasing calls around the world for embedding sustainability content throughout engineering curricula, particularly over the past decade. However in general there has been little by way of strategic or systematic integration within programs offered by higher education institutions(HEIs). Responding to a growing awareness towards the issues surrounding sustainability, a number of professional engineering institutions (PEIs) internationally have placed increasing emphasis on policies and initiatives relating to the role of engineering in addressing 21st Century challenges. This has resulted in some consideration towards integrating sustainable development into engineering curricula as envisaged by accreditation guidelines. This paper provides a global overview of such accreditation developments, highlighting emerging sustainability competencies (or ‘graduate attributes’) and places these in the context of relevant PEI declarations, initiatives, policies, codes of ethics and guideline publications. The paper concludes by calling for urgent action by PEIs, including strategic accreditation initiatives that promote timely curriculum renewal towards EESD.

Promoting resilience and effective workplace functioning in international students in health courses

The purpose of this project was to improve the quality of the learning experiences of international students in nursing, public health and nutrition and dietetics, both at university and in the clinical setting. The university worked in partnership with three major metropolitan health care facilities/services in Queensland to develop a framework and resources designed to promote quality work-integrated learning experiences for international students and clinical supervisory staff. The Resilience in International Student Education (RISE) model consists of student and staff workshops complemented by a purpose-built Cultural Connections for Learning (CCL) website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicate that the approach is highly valued by participants as it promotes useful dialogue, sharing of experiences and greater understanding regarding quality learning experiences for international students in the health workplace. It provides an ideal springboard for promoting collaboration between international students and clinical supervisors in the workplace. The resources developed have the potential to enhance student learning as well as clinical teaching. The challenge will be to achieve continued progress within international student education through the development of sustainable strategies to embed the program within the context of individual curricula.

Benefit of accident reduction considering the improvement of travel time reliability

Traffic accidents often cause lane closure, and diminish stability of travel time as well as the level of road services. On the other hand, research on the implementation of ITS services aiming at the reduction of traffic accidents has made considerable progress lately. However there has been little discussion on the benefits obtained by traffic accident reduction from the view point of travel time reliability. Therefore, in this research, relationships between traffic accidents and travel time reliability are examined, and the benefit of traffic accident reduction is calculated based on the scheduling model under travel time uncertainties. The results show the significance of traffic accident reduction for the improvement of travel time reliability.