Spectrophotometric determination of fenoterol hydrobromide in pharmaceutical preparations

A simple spectrophotometric method has been developed,for the determination of fenoterol hydrobromide (FH) in tablets, drops and syrup, as the only active principle and associated with ibuprofen. The method is based on the oxidative coupling reaction of the FH with 3-methyl-2-benzothiazolinone hydrazone (MBTH) and ceric sulphate as oxidant reagent. The mixture of the drug, MBTH and ceric sulfate, in acid medium, produces a red brown color compound, with absorption maximum at 475 nm. The calibration curve was linear over a concentration range from 3.0 to 12.0 mu g/mL, with correlation coefficient of 0.9998. The different experimental parameters affecting the development and stability of the color compound were carefully studied and optimized. The method was applied successfully to assay FH in dosage forms and simulated samples. The coefficient of variation was from 0.25 % to 0.82 % and average recoveries of the standard from 98 % to 102 %. The excipients (tablets and drops) did not interfere in the analysis and the results showed that method can be used for determination of the FH isolated or associated with ibuprofen with precision, accuracy and specificity. In case of syrup, the interference in the analysis suggests a possible reaction between vehicle components with MBTH.

Engineered ecosystem for sustainable on-site wastewater treatment

A Pilot-Scale Engineered Ecosystem (PSEE) operated for over two years in sub-tropical conditions, produced an effluent with COD (median 38 mg/L) and TSS (median 3 mg/L) levels comparable to that required by the AS/NZS 1547:2000 Onsite Domestic Wastewater Management standard. Only partial nitrification was achieved as dissimilatory nitrate reduction to ammonia occurred; however the level of NH4-N was reduced by 75% and total inorganic nitrogen by 53%. Phosphorus was not removed by the system due to the lack of regular sludge removal. Mass balances around the system showed that bacteria removed 36% of the influent nitrogen and 76% of the influent COD. Algae and plants were shown to remove 5% of the influent nitrogen, and 6% of the influent phosphorus. Challenges in developing a sustainable on-site wastewater treatment system were largely met by minimising chemical, energy and labour inputs, eliminating the need for frequent sludge handling, and creating an effluent quality suitable for re-use in non-potable applications. However, the sludge removal from the system needs to be adequately managed to avoid excessive accumulation as this can cause a range of negative impacts.

Three-dimensional structure of RK-1: A novel alpha-defensin peptide

NMR spectroscopy and simulated annealing calculations have been used to determine the three-dimensional structure of RK-1, an antimicrobial peptide from rabbit kidney recently discovered from homology screening based on the distinctive physicochemical properties of the corticostatins/defensins. RK-1 consists of 32 residues, including six cysteines arranged into three disulfide bonds. It exhibits antimicrobial activity against Escherichia coli and activates Ca2+ channels in vitro. Through its physicochemical similarity, identical cysteine spacing, and linkage to the corticostatins/defensins, it was presumed to be a member of this family. However, RK-1 lacks both a large number of arginines in the primary sequence and a high overall positive charge, which are characteristic of this family of peptides. The three-dimensional solution structure, determined by NMR, consists of a triple-stranded antiparallel beta -sheet and a series of turns and is similar to the known structures of other alpha -defensins. This has enabled the definitive classification of RK-1 as a member of this family of antimicrobial peptides. Ultracentrifuge measurements confirmed that like rabbit neutrophil defensins, RK-1 is monomeric in solution, in contrast to human neutrophil defensins, which are dimeric.

Evaluation of interventions to reduce catheter-associated bloodstream infection: Continuous tailored education versus one basic lecture

Background: This study evaluated the impact of 2 models of educational intervention on rates of central venous catheter-associated bloodstream infections (CVC-BSIs). Methods: This was a prospective observational study conducted between January 2005 and June 2007 in 2 medical intensive care units (designated ICU A and ICU B) in a large teaching hospital. The study was divided into in 3 periods: baseline (only rates were evaluated), preintervention (questionnaire to evaluate knowledge of health care workers [HCWs] and observation of CVC care in both ICUs), and intervention (in ICU A, tailored, continuous intervention; in ICU B, a single lecture). The preintervention and intervention periods for each ICU were compared. Results: During the preintervention period, 940 CVC-days were evaluated in ICUA and 843 CVC-days were evaluated in ICU B. During the intervention period, 2175 CVC-days were evaluated in ICUA and 1694 CVC-days were evaluated in ICU B. Questions regarding CVC insertion, disinfection during catheter manipulation, and use of an alcohol-based product during dressing application were answered correctly by 70%-100% HCWs. Nevertheless, HCWs` adherence to these practices in the preintervention period was low for CVC handling and dressing, hand hygiene (6%-35%), and catheter hub disinfection (45%-68%). During the intervention period, HCWs` adherence to hand hygiene was 48%-98%, and adherence to hub disinfection was 82%-97%. CVC-BSI rates declined in both units. In ICUA, this decrease was progressive and sustained, from 12CVC-BSIs/1000 CVC-days at baseline to 0 after 9 months. In ICU B, the rate initially dropped from 16.2 to 0 CVC-BSIs/1000 CVC-days, but then increased to 13.7 CVC-BSIs/1000 CVC-days. Conclusion: Personal customized, continuous intervention seems to develop a ""culture of prevention"" and is more effective than single intervention, leading to a sustained reduction of infection rates.

Insulin-like peptide genes in honey bee fat body respond differently to manipulation of social behavioral physiology

Nutrient sensitive insulin-like peptides (ILPs) have profound effects on invertebrate metabolism, nutrient storage, fertility and aging. Many insects transcribe ILPs in specialized neurosecretory cells at changing levels correlated with life history. However, the major site of insect metabolism and nutrient storage is not the brain, but rather the fat body, where functions of ILP expression are rarely studied and poorly understood. Fat body is analogous to mammalian liver and adipose tissue, with nutrient stores that often correlate with behavior. We used the honey bee (Apis mellifera), an insect with complex behavior, to test whether ILP genes in fat body respond to experimentally induced changes of behavioral physiology. Honey bee fat body influences endocrine state and behavior by secreting the yolk protein precursor vitellogenin (Vg), which suppresses lipophilic juvenile hormone and social foraging behavior. In a two-factorial experiment, we used RNA interference (RNAi)-mediated vg gene knockdown and amino acid nutrient enrichment of hemolymph (blood) to perturb this regulatory module. We document factor-specific changes in fat body ilp1 and ilp2 mRNA, the bee`s ILP-encoding genes, and confirm that our protocol affects social behavior. We show that ilp1 and ilp2 are regulated independently and differently and diverge in their specific expression-localization between fat body oenocyte and trophocyte cells. Insect ilp functions may be better understood by broadening research to account for expression in fat body and not only brain.

A new DTL-electrode holder for recording of electroretinograms in animals

Purpose: Contact lens electrodes (CLEs) are frequently used to register electroretinograms (ERGs) in small animals such as mice or rats. CLEs are expensive to buy or difficult to be produced individually. In addition, CLE`s have been noticed to elicit inconstant results and they carry potential to injure the cornea. Therefore, a new electrode holder was constructed based on the clinically used DTL-electrode and compared to CLEs. Material and methods: ERGs were recorded with both electrode types in nine healthy Brown-Norway rats under scotopic conditions. For low intensity responses a Naka-Rushton function was fitted and the parameters V(max), k and n were analyzed. The a-wave, b-wave and oscillatory potentials were analyzed for brighter flash intensities (1-60 scot cd s/m(2)). Repeatability was assessed for both electrode types in consecutive measurements. Results: The new electrode holder was faster in setting up than the CLE and showed lower standard deviations. No corneal alterations were observed. Slightly higher amplitudes were recorded in most of the measurements with the new electrode holder (except amplitudes induced by 60 cd s/m(2)). A Bland-Altman test showed good agreement between the DTL holder and the CLE (mean difference 35.2 mu V (Holder-CLE)). Pearson`s correlation coefficient for test-retest-reliability was r = 0.783. Conclusions: The DTL holder was superior in handling and caused far less corneal problems than the CLE and produced comparable or better electrophysiological results. The minimal production costs and the possibility of adapting the DTL holder to bigger eyes, such as for dogs or rabbits, offers with broader application prospects. (C) 2010 Elsevier B.V. All rights reserved.

SEM observation of the bond integrity of fiber-reinforced composite posts cemented into root canals

Objectives. To test the null hypothesis that continuity of resin cement/dentin interfaces is not affected by location along the root canal walls or water storage for 3 months when bonding fiber posts into root canals. Methods. Fiber posts were luted to bovine incisors using four resinous luting systems: Multilink, Variolink II, Enforce Dual and Enforce PV. After cementation, roots were longitudinally sectioned and epoxy resin replicas were prepared for SEM analysis (baseline). The original halves were immersed in solvent, replicated and evaluated. After 3 months water storage and a second solvent immersion, a new set of replicas were made and analyzed. The ratio (%) between the length (mm) of available bonding interface and the actual extension of bonded cement/dentin interface was calculated. Results. Significant lower percent values of bond integrity were found for Multilink (8.25%) and Variolink 11 (10.08%) when compared to Enforce Dual (25.11%) and Enforce PV (27.0%) at baseline analysis. The same trend was observed after immersion in solvent, with no significant changes. However, bond integrity was significantly reduced after 3 months water storage and a second solvent immersion to values below 5% (Multilink = 3.31%, Variolink=1.87%, Enforce Dual=1.20%, and Enforce PV=0.75%). The majority of gaps were depicted at the apical and middle thirds at baseline and after immersion in solvent. After 3 months, gaps were also detected at the cervical third. Significance. Bond integrity at the cement/dentin interface was surprisingly low after cementation of fiber posts to root canals with all resin cements. That was not significantly altered after immersion in solvent, but was further compromised after 3 months water storage. Gaps were mainly seen at middle and apical thirds throughout the experiment and extended to the cervical third after water storage for 3 months. Bond integrity of fiber posts luted to root canals was affected both by location and water storage. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

gamma-Radiation induces apoptosis via sarcoplasmatic reticulum in guinea pig ileum smooth muscle cells

We investigated the effects of gamma-radiation on cells isolated from the longitudinal smooth muscle layer of the guinea pig ileum, a relatively radioresistant tissue. Single doses (up to 50 Gy) reduced the amount of sarcoplasmatic reticulum and condensed the myofibrils, as shown by electron microscopy 3 days post-irradiation. After that, contractility of smooth muscle strips was reduced. Ca(2+) handling was altered after irradiation, as shown in fura-2 loaded cells, with elevated basal intracellular Ca(2+), reduced amount of intrareticular Ca(2+), and reduced capacitive Ca(2+) entry. Radiation also induced apoptosis, judged from flow cytometry of cells loaded with proprium iodide. Electron microscopy showed that radiation caused condensation of chromatin in dense masses around the nuclear envelope, the presence of apoptotic bodies, fragmentation of the nucleus, detachment of cells from their neighbors, and reductions in cell volume. Radiation also caused activation of caspase 12. Apoptosis was reduced by the administration of the caspase inhibitor Z-Val-Ala-Asp-fluoromethyl-ketone methyl ester (Z-VAD-FIVIK) during the 3 day period after irradiation, and by the chelator of intracellular Ca(2+), 1,2-bis(o-aminophenoxy)ethane-N,N,N`,N`-tetraacetic acid (BAPTA), from 1 h before until 2 h after irradiation. BAPTA also reduced the effects of radiation on contractility, basal intracellular Ca(2+), amount of intrareticular Ca(2+), capacitative Ca(2+) entry, and apoptosis. In conclusion, the effects of gamma radiation on contractility, Ca(2+) handling, and apoptosis appear due to a toxic action of intracellular Ca(2+). Ca(2+)-induced damage to the sarcoplasmatic reticulum seems a key event in impaired Ca(2+) handling and apoptosis induced by gamma-radiation. (c) 2008 Elsevier B.V. All rights reserved.

Revestimentos comestíveis na conservação pós-colheita de morangos cultivar Camarosa produzidos em sistema orgânico e convencional

As perdas pós-colheita de frutas promovem a elevação do custo dos produtos e diminuem a oferta ao consumidor. Suas principais causas estão na colheita, transporte e armazenamento inadequados. A aplicação de revestimentos comestíveis juntamente com a redução da temperatura de armazenamento constitui um dos métodos empregados para a conservação pós-colheita de produtos com vida útil curta, como frutas e hortaliças. O morango é um fruto consumido preferencialmente in natura. Desta forma, torna-se promissora a utilização de revestimento comestível para aumentar seu período de armazenamento e comercialização, sem alteração do sabor, da cor e do aroma dos frutos. A produção orgânica frente a convencional de frutos podem apresentar diferenças, sendo interessante o estudo envolvendo as formas de cultivo. Este estudo teve como objetivo avaliar a conservação pós-colheita de morangos cv. Camarosa, oriundos de cultivo orgânico e convencional revestidos com coberturas comestíveis. Os morangos foram revestidos com fécula de mandioca, gelatina e cera de carnaúba, armazenados durante 10 dias a 10 ºC. A cada 2 dias de armazenamento foram determinados perda de massa, sólidos solúveis, pH, acidez titulável, firmeza, antocianinas totais e podridão fúngica. Análise sensorial foi realizada para verificar a aceitação dos morangos e para avaliar a influência da informação nesta aceitação. A perda de massa foi maior no cultivo orgânico a partir do 8º dia de armazenamento, chegando a 11,47% contra 8,88% do cultivo convencional no final do 10º dia de armazenamento. O revestimento que possibilitou menor perda de massa foi o de cera de carnaúba em relação ao controle. A contaminação fúngica iniciou-se no 4º dia de armazenamento em ambos os tipos de cultivo. No 8º dia de armazenamento observou-se diferenças na podridão entre os tipos de cultivo, sendo o orgânico visualmente mais contaminado. O revestimento de cera de carnaúba apresentou menor podridão fúngica em relação aos outros revestimentos, porém não diferiu da amostra controle. Das variáveis físico-químicas avaliadas, apenas o teor de sólidos solúveis apresentou diferenças entre os tipos de cultivo, sendo o morango convencional o que obteve maiores valores. O teor de antocianinas dos morangos revestidos com fécula de mandioca diferiu do controle, porém o revestimento com fécula não diferiu dos revestidos com gelatina e cera de carnaúba. Foram verificadas diferenças na firmeza dos frutos em relação aos revestimentos. Ao longo do tempo foi observado diferenças no pH, teor de antocianinas e firmeza. O revestimento com cera de carnaúba se mostrou mais adequado em relação aos demais revestimentos, porém sua aparência mostrou-se com pouco brilho e esbranquiçado. Os frutos avaliados apresentaram vida útil pós-colheita de aproximadamente 6 dias. Os morangos, do ponto de vista microbiológico, se mostraram aptos para consumo. A aceitação dos morangos foi boa, não tendo ix diferenças significativas entre morango orgânico e convencional. O fornecimento da informação de “morango orgânico” e a apresentação de um texto adicional informativo não influenciaram na aceitação dos morangos. Entre os revestimentos testados o de cera de carnaúba se mostrou mais aplicável, os demais nas condições testadas não mostraram bons resultados.

Cenários de mudanças climáticas para a América do Sul : impacto no zoneamento agroclimático da cana-de-açúcar

O Painel Intergovernamental sobre Mudanças Climáticas (IPCC) através do seu Quarto Relatório de Avaliação das Mudanças Climáticas Globais (IPCC-AR4), publicado em 2007, atribui as emissões de gases de efeito estufa como a principal causa do aumento médio das temperaturas e alerta para uma elevação entre 1,8 ºC e 6,4 ºC até 2100, podendo modificar assim a aptidão climática para as culturas agrícolas em diversas regiões do planeta. Diante disso, existe a necessidade de substituição dos combustíveis fósseis por fontes renováveis e limpas de energia, como o etanol. A cana-de-açúcar apresenta-se, portanto, como uma cultura estratégica na produção do etanol. O presente trabalho teve como objetivos: 1) avaliar o desempenho dos Modelos Climáticos Globais (MCGs) do IPCC-AR4 na simulação de dados climáticos de temperatura do ar e precipitação pluviométrica para o período anual e mensal; 2) elaborar o zoneamento agroclimático da cana-de-açúcar para a América do Sul considerando o clima referência e o futuro para as décadas de 2020, 2050 e 2080 em função do cenário de emissão A1B considerado pessimista e que usa um equilíbrio entre todas as fontes de energia. Para a avaliação do desempenho dos MCGs, foram utilizados dados climáticos médios mensais observados de precipitação e temperatura do ar provenientes do Climatic Research Unit (CRU) e dados simulados oriundos dos 22 MCGs do IPCC (cenário 20c3m) compreendidos entre o período de 1961-1990, além do Multimodel (ensemble) – MM que é a média da combinação dos dados de todos os modelos. O desempenho dos MCGs foi avaliado pelos índices estatísticos: desvio padrão, correlação, raiz quadrada da média do quadrado das diferenças centralizadas e o “bias” dos dados simulados com os observados, que foram representados no diagrama de Taylor. Para a etapa da elaboração do zoneamento agroclimático procedeu-se o cálculo dos balanços hídricos (referência e futuros) da cultura, pelo método de Thornthwaite & Mather (1955). Para o cenário referência, utilizaram-se dados das médias mensais da precipitação e temperatura provenientes do CRU, enquanto que para as projeções futuras, dados provenientes das anomalias do Multimodel (ensemble) – MM para as décadas de 2020, 2050 e 2080, que foram ajustados, obtendo-se assim as projeções futuras para cada período analisado. Baseado nos mapas temáticos reclassificados de deficiência hídrica anual, temperatura média anual, excedente hídrico anual e no índice de satisfação das necessidades de água (ISNA), realizou-se uma sobreposição dessas informações obtendo assim, os mapas finais do zoneamento agroclimático da cana-de-açúcar. Posteriormente ao zoneamento, realizou-se a análise das transições (ganhos, perdas e persistências) entre as classes de aptidão climática da cultura. Os resultados mostram que o Multimodel (ensemble) – MM para o período mensal apresenta o melhor desempenho entre os modelos analisados. As áreas inaptas correspondem a maior parte da América do Sul e uma expressiva transição entre as classes de aptidão climática da cultura.

Conceptual design of a conveyer system for supporting basic quality of life of bedridden elderly people

With the increasing number of aged people, especially in developed countries, Ambient Assisted Living solutions have become an important subject to be explored and developed. Currently, as specialized Institutions in geriatric care cannot cope with the increasing requests for support of quality of life, patients have to remain at their homes having as caregiver the other member of the couple or a member of close family. A solution for supporting the caregiver, during assisting the bedridden person with some basic tasks as eating, taking a bath and/or hygiene care is of utmost importance. This paper presents an approach for supporting the caregiver in moving and repositioning the bedridden elderly people (BEP) with the assistance of a mechanical system conveyer. The conceptual design of the mechanical system must be devoted to assist the caregiver in the handling and repositioning of the BEP. The proposed mechatronic system must, ideally, minimize the system's handling complexity, reduce the number of caregivers and the amount of spended and needed effort.

Conceptual design of a mechatronic system for supporting basic quality of life of bedridden elderly people

Ambient Assisted Living is an important subject to be explored and developed, especially in developed countries, due to the increasing number of aged people. In this context the development of mechatronic support systems for bedridden elderly people (BEP) living in their homes is essential in order to support independence, autonomy and improve their quality of life. Some basic tasks as eating, taking a bath and/or hygiene cares become difficult to execute, regarding that often the main caregiver is the other element of the aged couple (husband or wife). This paper presents the conceptual design of a mechanical system especially devoted to assist the caregiver in the handling and repositioning of the BEP. Issues as reducing the number of caregivers, to only one, and reducing the system's handling complexity (because most of the time it will be used by an aged person) are considered. The expertise obtained from the visits to rehabilitation centers and hospitals, and from working meetings, are considered in the development of the proposed mechatronic system.

Quality perception in research laboratories from Fiocruz after QMS implementation

Quality Management System has been implemented at the René Rachou Research Center since 2003. This study investigated its importance for collaborators (Cs) in laboratories. This was a quantitative and descriptive study performed in a group of 113 collaborators. It was based on the World Health Organization handbook: Quality Practices in Basic Biomedical Research. The questionnaires evaluated the parameters using the Likert scale. Biosafety, training and ethics were considered to be the most important parameters. Supervision and quality assurance, data recording, study plan, SOPs and file storage achieved intermediate evaluation. The lower frequency of responses was obtained for result report, result verification, personnel and publishing practices. Understanding the perception of the collaborators allows the development of improvement actions aiming the construction of a training program directing strategies for disseminating quality.

Projecto e implementação de um sistema de alimentação para um transformador de alta tensão

Neste trabalho pretende-se estudar, dimensionar e implementar experimentalmente de um sistema de alimentação para transformadores de alta tensão a alta frequência. Este sistema será constituído por dois elementos principais, um rectificador monofásico em ponte totalmente controlado e por um inversor de tensão. Inicialmente realizou-se um estudo sobre as diferentes topologias possíveis para o rectificador considerando diferentes tipos de carga. Realizou-se, também, um estudo sobre o circuito de geração dos impulsos de disparo dos tiristores, executado com base num circuito integrado TCA 785, dimensionou-se os elementos constituintes do circuito de disparo, e de um sistema de controlo da tensão de saída do rectificador. Posteriormente estudou-se o funcionamento do inversor de tensão, definindo-se os modos de operação e dimensionou-se um circuito ressonante tendo em conta os parâmetros construtivos do transformador que se pretende utilizar. Finalmente procedeu-se à implementação prática dos sistemas previamente dimensionados e simulados e à apresentação dos respectivos resultados.

: SiC Multilayer Photonic Structures with Self Optical Bias Amplification

Characteristics of tunable wavelength pi'n/pin filters based on a-SiC:H multilayered stacked cells are studied both experimental and theoretically. Results show that the device combines the demultiplexing operation with the simultaneous photodetection and self amplification of the signal. An algorithm to decode the multiplex signal is established. A capacitive active band-pass filter model is presented and supported by an electrical simulation of the state variable filter circuit. Experimental and simulated results show that the device acts as a state variable filter. It combines the properties of active high-pass and low-pass filter sections into a capacitive active band-pass filter using a changing photo capacitance to control the power delivered to the load.