Molecular and biochemical analyses of wounding in mesocarp of peach (Prunus persica L. Batsch) ripe fruits

The physiological and molecular responses of ripe fruit to wounding were evaluated in two peach (Prunus persica) varieties ('Glohaven', GH, melting and 'BigTop', BT, slow melting nectarine) by comparing mesocarp samples from wedges (as in minimal processing) and whole fruit as the control. Slight differences between the two varieties were detected in terms of ethylene production, whereas total phenol and flavonoid concentrations, and PPO and POD enzyme activities showed a general increase in wounded GH but not in BT. This was associated with the better appearance of the BT wedges at the end of the experimental period (72 h). Microarray (genome-wide ?PEACH3.0) analysis revealed that a total number of 2218 genes were differentially expressed (p < 0.01, log2 fold change expression ratio >1 or <-1) in GH 24 h after wounding compared to the control. This number was much lower (1208) in BT. According to the enrichment analysis, cell wall, plasma membrane, response to stress, secondary metabolic processes, oxygen binding were the GO categories over-represented among the GH up-regulated genes, whereas plasma membrane and response to endogenous stimulus were the categories over-represented among the down-regulated genes. Only 32 genes showed a common expression trend in the two varieties 24 h after wounding, whereas a total of 512 genes (with highly represented transcription factors), displayed opposite behavior. Quantitative RT-PCR analysis confirmed the microarray data for 18 out of a total of 20 genes selected. Specific WRKY, AP2/ERF and HSP20 genes were markedly up-regulated in wounded GH, indicating the activation of regulatory and signaling mechanisms probably related to different hormone categories. Compared to BT, the expression of specific genes involved in phenylpropanoid and triterpenoid biosynthetic pathways showed a more pronounced induction in GH, highlighting the difference between the two peach varieties in terms of molecular responses to wounding in the mesocarp tissue.

Determination of the mechanical properties of corn grains and olive fruits required in DEM simulations

Discrete element method (DEM) is a numerical technique widely used for simulating the mechanical behavior of granular materials involved in many food and agricultural industry processes. Additionally, this technique is also a powerful tool to understand many complex phenomena related to the mechanics of granular materials. However, to make use of the potential of this technique it is necessary to develop DEM models capable of representing accurately the reality. For that, among some other questions, it is essential that the values of the microscopic material properties used to define the numerical model are accurately determined.

Nondestructive quantification of chemical and physical properties of fruits by time-resolved reflectance spectroscopy in the wavelength range 650-1000 nm

Time-resolved reflectance spectroscopy can be used to assess nondestructively the bulk (rather than the superficial) optical properties of highly diffusive media. A fully automated system for time-resolved reflectance spectroscopy was used to evaluate the absorption and the transport scattering spectra of fruits in the red and the near-infrared regions. In particular, data were collected in the range 650-1000 nm from three varieties of apples and from peaches, kiwifruits, and tomatoes. The absorption spectra were usually dominated by the water peak near 970 nm, whereas chlorophyll was detected at 675 nm. For ail species the scattering decreased progressively with increasing wavelength. A best fit to water and chlorophyll absorption line shapes and to Mie theory permitted the estimation of water and chlorophyll content and the average size of scattering centers in the bulls; of intact fruits.

Damage mechanisms in the handling of fruits

The recognition of an increasing and worldwide demand for high quality in fruits and vegetables has grown in recent years. Evidence of severe problems of mechanical damage is increasing, and this is affecting the trade of fruits in European and other countries. The potential market for fresh high-quality vegetables and fruits remains restricted by the lack of quality of the majority of products that reach consumers; this is the case for local as well as import/export markets, so a reduction in the consumption of fresh fruits in favour of other fixed-quality products (dairy in particular) may become widespread. In a recent survey (King, 1988, cited in Bellon, 1989), it appears that, for the moment, one third of the surveyed consumers are still continuing to increase their fresh produce consumption. The factors that appear as being most important in influencing the shopping behaviour of these consumers are taste/flavour, freshness/ripeness, appealing look, and cleanliness. Research on mechanical damage in fruit and vegetables has been underway for several years. The first research made on physical properties of fruits was in fact directed towards analysing the response to slow or rapid loading of selected fruits (Fridley et al, 1968; Horsefield et al., 1972). From that time on, research has expanded greatly, and different aspects of the problem have been approached. These include applicable mechanical models for the contact problem, the response of biological tissues to loading, devices for detecting damage causes in machines and equipment, and procedures for sensing bruises in grading and sorting. This chapter will be devoted to the study of actual research results relative to the cause and mechanisms of mechanical damage in fruits (secondarily in vegetables), the development of bruises in these commodities, the models that have been used up to now, and the different factors which have been recognized as influencing the appearance and development of mechanical damage in fruits. The study will be focused mainly on contact-damage - that is, slow or rapid loads applied to the surface of the products and causing bruises. (A bruise is defined as an altered volume of fruit tissues below the skin that is discoloured and softened.) Other types of mechanical damage, like abrasion and scuffing, punctures and cuts, will be also mentioned briefly.

Bruise susceptibility in pome fruits under different loading and storage conditions

Samples of "Golden" and "Granny Smith" apples and "Conference" and "Doyenne of Cornice" pears have been tested. A great effect of storage conditions has been detected for pear but not for apple varieties. Both apple cultivars show to be equally resistant to quasi-static and to dinamic loading while pear varieties show great differences. All these effects can be quantified in order to describe mathematically species and varieties behavior.

Sum Insured Determination for Cereal, Citrus and Vineyards in the Spanish Agricultural Insurance System.

In general, insurance is a form of risk management used to hedge against a contingent loss. The conventional definition is the equitable transfer of a risk of loss from one entity to another in exchange for a premium or a guaranteed and quantifiable small loss to prevent a large and possibly devastating loss being agricultural insurance a special line of property insurance. Agriculture insurance, as actually are designed in the Spanish scenario, were established in 1978. At the macroeconomic insurance studies scale, it is necessary to know a basic element for the insurance actuarial components: sum insured. When a new risk assessment has to be evaluated in the insurance framework, it is essential to determinate venture capital in the total Spanish agriculture. In this study, three different crops (cereal, citrus and vineyards) cases are showed to determinate sum insured as they are representative of the cases found in the Spanish agriculture. Crop sum insured is calculated by the product of crop surface, unit surface production and crop price insured. In the cereal case, winter as spring cereal sowing, represents the highest Spanish crop surface, above to 6 millions of hectares (ha). Meanwhile, the four citrus species (oranges, mandarins, lemons and grapefruits) occupied an extension just over 275.000 ha. On the other hand, vineyard target to wine process shows almost one million of ha in Spain.

Actual state of the mechanization of harvest of fruits and vegetables in Spain.

A review of the actual methods of harvest of fruits and vegetables in Spain is made. Special emphasis is given to the main horticultural Spanish crops that can be harvested by machines like green, beans, green peas broad beans, tomatoes, lettuces and chufas, as vegetables, and olives almonds, cherries, apples pears apricots, etc. as fruits.

Impact parameters related to bruising in selected fruits.

Impact testing with an instrumented free-fallingmass (50.4 g) device was applied to three varities of pears and two varieties of apples, forincreasing ripeness stages and impact energy (2 to 20 cm drops). Impact parameters were studied in relation to bruise and to ripeness, establishing relations between them and with the different characteristics of the fruits.

Impact bruises in pomaceae fruits: Evaluation methods and structural features.

Using a laboratory impact tester, impacts were applied to fruits of different varieties of apples and pears. The response to impact was analized, and many parameters were recorded, to be correlated to bruise susceptibility and to ripeness changes. Different methods for the detection and evaluation of the bruised Area and its features were studied, using direct observation and various reactives. Different types of bruises were established.

Impact damage on selected varieties of apples, pears and other fruits.

During the past years, different laboratory impact response studies have been carrj.ec out in following fruits: apples (2 varieties), pears (4 varieties), Asian or Nashi pears (4 varieties), melons (2 varieties), peaches (2 varieties) and avocados. The methodology of the tests is described, as well as the results and observations obtained in each group of tests. Impact response is compared to bruising susceptibility, bruise characteristics (appearance and structural features) and varietal and ripeness differences.

Sensing physical stage of fruits by their response to non destructive impacts.

Fruits of two varieties of both apples and pears were tested in the laboratory to measure their response to a small energy impact applied by an impact tester. Samples of fruits of increasing maturity were tested during several weeks. Non-destructive impacts and other destructive and non-destructive measurements of post-harvest ripeness were applied. A new software was created to control the impact test, calculate the eleven parameters, and sort out the fruit. This software needs a data base and may create new ones. The implementation of an on-line impact device for automatic detection of texture is being designed (patent pending).

Damage Mechanisms in the Handling of fruits.

Recent findings on the importance of losses due to damage incidence, on causes and on mechanisms of damage in fruits are reviewed and discussed. Incidence of damage in different fruits in some European markets has been -proved to be very high. Structure of fruit flesh and skin (hystology) is of foremost importance in the response of fruits to impacts and to compression. Continuous variation of fruit compositional and structural characteristics during maturation has to be taken into consideration when studying damage susceptibility.

Effect of impacting mass on firmness sensing of fruits.

There has been an increased interest in using impact techniques for sensing firmness of fruits and vegetables. When an impacter is used to impact a fruit, the impacting mass is an important parameter which affects both the impact signal and fruit damage. Results of theoretical analysis and tests conducted on two varieties of pears indicate that lowering the impacting mass results in amplifying the measured signal, reducing sensing errors, and minimizing damage to the fruit.

Use of electronic fruits to evaluate fruit damage along the handling process.

Two electronic fruits (SEP-1, Simulated Electronic Product, developed in Scotland, and Techmark IS-100, Instrumented Sphere, developed in USA) have been compared in laboratory tests and then used to evaluate handling operations, in several cooperatives of two areas of Spain: Lérida (pome fruits) and Valencia (stone fruits). Advantages of each device were evaluated. Harvest, mechanical bin unloading, and grading line transfers and sizers were identified as operations causing fruit damage.

Sensing and modelling mechanical properties of fruits for quality.

Nondestructive techniques are extensively researched for the measurement of physical properties of fruits related to quality. Optical properties can be applied mainly in the detection of those quality features which are related to the chemical composition of the fruit, color (in the VIS region) or chemical constituents (sugar, in the MR region) being the most important. The most relevant mechanical property of fruits is consistency, generally called firmness, and to date only techniques which are able to measure the mechanical properties of the fruit bulk tissue are used for its prediction. Fruits can be modelled as elastic bodies, or at least as partially elastic. Therefore, the measurement of some elastic constants of the fruit can be used for the evaluation of its firmness. The differences in the response to loading are relevant in studying a) fruit firmness and b) bruising susceptibility. Both have been modelled for selected fruit species and varieties.