Studies on the biochemical composition of some freshwater fishes. Pt. 1. Muscle

Twenty five different species belonging to 16 genera of freshwater fishes were analysed for protein, fat, moisture, ash, carbohydrate, phosphorus, calcium and total iron content in their muscle. Calorific value for protein, fat and carbohydrate fractions and total calories for each species were also calculated.

Studies on the biochemical composition of some freshwater fishes. Pt. 1. Muscle

Twenty five different species belonging to l6 genera of freshwater fishes were analyzed for protein, fat, moisture, ash, carbohydrate, phosphorus, calcium and total iron content in their muscle. Calorific value for protein, fat and carbohydrate actions and total calories for each species were also calculated.

Utilisation of trash fish. Pt. 2. Studies on preparation of fish soup mix

The paper deals with the investigations carried out on the preparation of fish soup mix using partially deodorized trash fish meat. The product contained about 25% protein and had a storage life of 4 months at ambient temperature (28-31°C).

Preparation of pasteurized fish ball in curry and its storage study at 0 to 2°C

Fish ball in curry was prepared as per the standardized method and recipe, pasteurized and subjected to storage at 0 to 2°C in a domestic refrigerator. The curry prepared with tomato at a level of 20% of onion was found to be suitable organoleptically. A level of 3% of spice mixture improved the taste of curry. Fish balls prepared with concentrated curry paste and oil at a level of 0.5% was found to be suitable organoleptically. Curry prepared by adding oil at the rate of 3% scored high values for all attributes as compared to other levels. Curry prepared by diluting curry paste with water at rate of 20% had been adjudged the best as compared to other water levels. Fish ball in curry with a 50 : 50 ratio pasteurized at 85°C for five minutes had scored higher values under organoleptic evaluation. It was observed that the product was acceptable organoleptically up to the 12th day when stored at 0 to 2°C.

National report of the frame survey 2006 in the Ugandan part of Lake Victoria

Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine· the number of fishers, fish landing sites, facilities at the landing sites. Information on the composition fishing crafts, their mode of propulsion, fishing gears and the fish species they target is also collected. This information is used to guide development and management of the lake's fisheries. The results of the four surveys carried out since 2000 show that the number of landing sites has decreased by 24% from 597 in 2000 to 481 in 2006, mainly as result of reorganisation of landing sites into Beach Management Units (BMUs). The fish landing sites continue to have inadequate facilities to service the fisheries industry e.g. in the 2006 survey only 11.2% of landing sites had fish shades; <0.6% had cold rooms; 3.5% had electricity; and only 35.5% had toilet facilities. Similarly, only 11.4% of landing sites had portable water; 2.5% had jetties, 3.7% had 'fish stores; and 36% were accessible by all weather roads. There is need to improve facilities servicing fisheries at landing sites, with major emphasis on sanitary facilities, especially toilets and portable water. The BMUs should be sensitised to prioritise the construction and utilisation of public toilet facilities at their respective landing sites. The ultimate aim should be to have public toilets at all fish landing sites. The trend of the various indicators of fishing effort has continued upwards: The total number of fishers increased by 43.5% from 37,721 in 2004 to 54,148 in 2006 and the number of fishing crafts increased (43.9%) from 16,775 in 2004 to 24,148 in 2006 over the same period. The total number of gillnets increased by 28.6% from 458,597 in 2004 to 589,777 in 2006 and the number of long line hooks increased by 136% from 968,848 to 2,285,609. The number of fishing crafts using outboard engines also increased from 3,173 in 2004 to 5,047 in 2006 suggesting that more fishers were going far in search of fish. There is still a large number of illegal gears especially beach seines, which increased by 58.8% from 954 in 2004 to 1420 in 2006. Efforts to remove these very destructive gears should be stepped up. There was also larger increase in number of illegal gillnets <5 inch mesh size. These increased by 63% from 56,246 in 2004 to 91,740 in 2006 compared with 23.8% increase of gillnets ~5 inch mesh size. There were also large increases in the numbers of gillnets of 5 and 5% inch mesh size, which increased by 48% and 130% from 2004 to 2006 implying a trend towards use of smaller gillnet mesh sizes. The number of traps which are used in shallow vegetated areas, flood plains and river mouths to target tilapiines and riverine species decreased drastically from 5,361 traps in 2004 to only 499 traps in 2006, a decrease of 974%, a phenomenon attributed to the receding water levels which have left the shallow vegetated areas dry. A total of 17,475 fishing crafts, 72% of all fishing crafts, in the Ugandan part of the lake are still using paddles and the. number of parachute crafts is also still very high, (Le. 5,064) comprising a high proportion (21 %) of the total number of fishing. There is need to promote the use of large fishing crafts with sails or a combination of sail and outboard motor. The Mukene fishery in the Ugandan waters of Lake Victoria has remained underdeveloped with only 9% of all fishing crafts operating in this fishery. Also less than 2% of fishing crafts with sails or motor operate in this fishery which implies that it is limited to near shore waters. Effort should be made to develop this fishery as it appears to have high potential, especially in deep offshore waters which are hardly fished.

Construction, characterization and chromosomal mapping of bacterial artificial chromosome (BAC) library of Yunnan snub-nosed monkey (Rhinopithecus bieti)

We constructed a high redundancy bacterial artificial chromosome library of a seriously endangered Old World Monkey, the Yunnan snub-nosed monkey (Rhinopithecus bieti) from China. This library contains a total of 136 320 BAC clones. The average insert size of BAC clones was estimated to be 148 kb. The percentage of small inserts (50-100 kb) is 2.74%, and only 2.67% non-recombinant clones were observed. Assuming a similar genome size with closely related primate species, the Yunnan snub-nosed monkey BAC library has at least six times the genome coverage. By end sequencing of randomly selected BAC clones, we generated 201 sequence tags for the library. A total of 139 end-sequenced BAC clones were mapped onto the chromosomes of Yunnan snub-nosed monkey by fluorescence in-situ hybridization, demonstrating a high degree of synteny conservation between humans and Yunnan snub-nosed monkeys. Blast search against human genome showed a good correlation between the number of hit clones and the size of the chromosomes, an indication of unbiased chromosomal distribution of the BAC library. This library and the mapped BAC clones will serve as a valuable resource in comparative genomics studies and large-scale genome sequencing of nonhuman primates. The DNA sequence data reported in this paper were deposited in GenBank and assigned the accession number CG891489-CG891703.

Numerical simulation of the growth of ZnO nanostructures in a tube furnace by physical vapour deposition

Zinc oxide is a versatile II-VI naturally n-type semiconductor that exhibits piezoelectric properties. By controlling the growth kinetics during a simple carbothermal reduction process a wide range of 1D nanostructures such as nanowires, nanobelts, and nanotetrapods have been synthesized. The driving force: for the nanostructure growth is the Zn vapour supersaturation and supply rate which, if known, can be used to predict and explain the type of crystal structure that results. A model which attempts to determine the Zn vapour concentration as a function of position in the growth furnace is described. A numerical simulation package, COMSOL, was used to simultaneously model the effects of fluid flow, diffusion and heat transfer in a tube furnace made specifically for ZnO nanostructure growth. Parameters such as the temperature, pressure, and flow rate are used as inputs to the model to show the effect that each one has on the Zn concentration profile. An experimental parametric study of ZnO nanostructure growth was also conducted and compared to the model predictions for the Zn concentration in the tube. © 2008 Materials Research Society.

The behavior of a single pile under cyclic axial loads

Many piled foundations have been destroyed under significant cyclic loads in earthquakes. Centrifuge modelling of a single pile subjected to cyclic loads has been conducted to investigate the influence of cyclic loads on the axial performance of the single pile. Different pile installation procedures were applied to compare the axial behaviour of different piles under cyclic loads. Pile head permanent settlements accumulated due to cyclic axial loads, and these increased with the increasing load amplitude. Also the pile head axial secant stiffness decreased with the increasing number of axial load cycles, and with increasing amplitude. Furthermore, the axial pile performance is influenced significantly by different installation methods. © 2010 ASCE.

Monogenean gill parasites of Indian major carps from different fish farms of Mymensingh, Bangladesh

All together 148 fish host samples of Labeo rohira, Cirrhina mrigala, Catla catla and Labeo gonius were collected from different fish farms of Mymensingh. The gill monogeneans were then dislodged from the gill under dissecting microscope and fixed in ammonium picrate. Five species of Dactylogyrus namely, Dactylogyrus mrigali, D. chauhanus, D. yogendrai, D. labei and D. kalyanensis were recovered from sampled fishes. All the parasites were studied and redescribed, and reported for the first time from Bangladesh. The present investigation established Catla catla as a new host of D. labei.

Impact of Bashundhara Baridhara Housing Project on the status, abundance and species diversity of fish in Bashundhara Housing lake in Dhaka, Bangladesh

A study on the status of fisheries and environmental impact assessment (EIA) was conducted on Bashundhara Baridhara Housing Project (BBHP), Dhaka, Bangladesh for prediction and measure the effects of housing project related development activities that have already been implemented and planned for future implementation. The project is still under development phase and so far allotted 10,000 plots of different sizes. The study shows that the original water bodies and natural fish production there from have greatly declined due to earth filling carried out for development of land for the housing. The physico-chemical parameters of the existing water body within the project area were found to be suitable for fish farming in the estate. A number of economically important fish species are found available in the existing lake. However, the natural fisheries resources of the existing lake is under great stress due to the changes made in the ecosystem, siltation, construction of building and dumping of house building and household waste materials. This has caused some important fish species of the lake to become critically endangered and vulnerable which have been documented in this paper. Appropriate regulatory and mitigating measures with respect to water management, disposal of construction garbage and other biomedical toxic substances far away from the water bodies are required to be taken to keep the water safe and suitable for fish production as well as for multipurpose use of the lake water.

Effect of carp PG doses on induced breeding of Shing, Heteropneustes fossilis (Bloch)

Five hormone doses viz. 25, 50, 75, 100, and 125 mg of carp PG/kg of body weight of the recipient fish were tested and they were designated as T1 T2, T3, T4, and T5 respectively. Significantly higher fertilization (98%) and hatching rates (38%) were obtained from T3 (75 mg of carp PG extract/kg body weight). While T4 (100 mg of carp PG extract/kg body weight) and T5 (125 mg of carp PG extract/kg body weight) gave the highest (90%) ovulation rate. In June and July the highest fertilization rate of 96 and 96.4% respectively and hatching rate 42.5 and 48.7% respectively were obtained. In over all consideration carp PG extract at a dose of 75 mg/kg body weight appears to be the suitable dose for induced breeding of H. fossilis and June and July are the suitable time for its induced breeding.

Self-assembled artificial pinning centres in thick YBCO superconducting films

Strong, artificial pinning centres are required in superconducting films of large thickness for power applications in high magnetic fields. One of the methods for the introduction of pinning centres in such films is substrate decoration, i.e., growing nanoscale islands of certain materials on the substrate prior to the deposition of the superconducting film. Two other methods are building up a layered distribution of a second phase and homogeneous incorporation of second phase inclusions from a compositional target. In this paper, we compare the effectiveness of these methods in terms of the type of the self-assembly of nanoparticles. The comparison is made over a large set of YBa2Cu3O7 films of thickness up to 6.6 μm deposited with Au, Ag, Pd, LaNiO3, PrBa2Cu 3O7, YBCO, BaZrO3 and Gd2Ba 4CuWOy nanoparticles. It is found that substrate-decoration self-assembly is able to provide higher critical current in low magnetic field than the incorporation of homogeneous second phase in the sample microstructure. By specific modification of substrate decoration we achieved the self-field critical current per centimetre of width of 896 A/cm at 77.3 K and 1620 A/cm at 65 K in a film of thickness of 4.8 μm. © 2010 IOP Publishing Ltd.

Demonstration of some selected aquaculture technologies under farming system research in Jessore and Santahar, Bangladesh

BFRI evolved some selected aquaculture technologies viz. polyculture of carps in perennial ponds, monoculture of short cycled fish species (BFRI super strain) in seasonal ponds and prawn seed production through backyard hatchery system have been demonstrated under Farming System Research (FSR) component in Jessore and Santahar regions. Both polyculture of carps and monoculture of short cycled fish species technologies were tested in farmer's ponds in Kaium Kula village near Jessore town. In polyculture trials, seven species comprising of silver carp (Hypophthalmichthys molirrix), catla (Catla catla), rohu (Labeo rohita), grass carp (Ctenopharyngodon idellus), common carp (Cyprinus carpio), mrigal (Cirrhinus cirrhosus) and silver barb (Barbonymus gonionotus) were stocked @ 9,500 (ratio 6:2:4:2:1:5:5); 10,750 (ratio 6:2:4:2:1:5:5) and 12,000 (ratio 6:2:4:2:1:5:4) fish/ha respectively in ponds of T1, T2 and T3 having three replications of each. The mean highest fish production was 3,148 kg/ha in T3, followed by 2,899 kg/ha in T1 and 2,875 kg/ha in T2. Production of T3 was significantly different (P<0.05) than both T1 and T2, while there was no significant differences (P>0.05) between the production of T1 and T2. In case of trial of short cycled fish species, two treatments were tested: T1 (comprising of BFRI super strain of Nile tilapia, silver carp, common carp and silver barb; ratio 3:5:1:1) and T2 (having only BFRI super strain of Nile tilapia). Stocking density in both the treatments were same (20,000 fish/ha). In this trial average production was higher in T1 (2,743 kg/ha) than that of T2 (2,369 kg/ha) but the production figure in these two treatments was not significantly different (P>0.05). Demonstration of backyard prawn hatchery technology was tested at Santahar region of Bogra district, North-west part of Bangladesh. This hatchery consisted of three main components i) bio-filter, ii) rearing tank unit (chari) and iii) air blower/air pump unit. Plastic drum of 200-250 l capacity and cemented chari of 200-250 l capacity were used as bio-filter and larval rearing containers respectively. A 0.5 hp air blower with 6 aquarium air pump were used to operate the aeration system in the hatchery. Diluted sea water (10-12 ppt) made from brine solution (200-250 ppt) collected from salt-bed was used in the backyard hatchery system of hatching of eggs and rearing of larvae. Rearing of first stage zoea-larvae was reared in three rearing tanks following the stocking densities of 40, 50 and 60/l of water respectively. Production of post-larvae were 20±0.82, 22±1.12 and 28±1.63/liter of water in treatments I, II and III respectively in 38, 40 and 39 days rearing period.