Integração de energias renováveis num modelo de edifício de Balanço Energético Quase Zero (NZEB)

Neste estudo aborda-se o novo conceito dos edifícios com necessidades quase nulas de energia (Nearly Zero Energy Buildings, NZEB) no parque edificado Europeu, nomeadamente os edifícios de habitação que serão construídos a partir de 2020. Estes edifícios terão que respeitar os requisitos mínimos de eficiência energética de modo a reduzir a dependência dos combustíveis fósseis que tem vindo a aumentar significativamente ao longo dos últimos anos. Ao longo deste trabalho foi modelado e dimensionado um edifício de habitação unifamiliar situado na zona de Lisboa e recorreu-se a técnicas e estratégias que aumentam a eficiência energética do mesmo. Este dimensionamento foi feito recorrendo ao software DesignBuilder, tendo sido em seguida efetuada uma análise energética, com recurso ao software EnergyPlus. Posteriormente à análise estar feita, realizou-se um estudo utilizando o software SolTerm para se integrar sistemas de produção de energia renovável no edifício, de modo a tentar suprir as necessidades energéticas do edifício no que se refere a aquecimento ambiente, águas quentes sanitárias (AQS) e necessidades elétricas. Para suprir as necessidades de arrefecimento e aquecimento que o sistema solar térmico não tem capacidade de suprir foi introduzida uma bomba de calor, reduzindo assim o consumo elétrico tornando o edifício mais sustentável. Já para produção de energia elétrica foi inserido um sistema solar fotovoltaico. Foi avaliada também nesta fase a relação custo-benefício da aplicação de cada um destes sistemas, de modo a escolher aquele que maximiza o suprimento das necessidades e que ao mesmo tempo é economicamente viável. Por último foi realizada uma análise crítica aos resultados obtidos e é feito o enquadramento com o que é pretendido num edifício NZEB.

Effects of circular myotomy on the healing of esophageal suture anastomosis: an experimental study

For esophageal reconstruction in newborns with esophageal atresia, esophageal reunion with an end-to-end anastomosis is the ideal procedure, although it may result in leaks and strictures due to tension on the suture line, mainly in cases with a wide gap between the ends. Circular myotomy (Livaditis' procedure) is the best method to elongate the proximal esophageal pouch and reduce anastomotic tension. This experimental investigation in dogs was undertaken to attempt to verify that circular myotomy decreases the anastomotic leak rate in newborns with wide gap esophageal atresia, and to analyze whether the technique promotes morphologic changes in the anastomotic scar. A pilot study demonstrated that it is necessary to resect more than 8 cm (40% of the total esophageal length) in order to obtain high leak rates. In the experimental project, such resection was performed in dogs divided into two groups (control group, anastomosis only, and experimental group, anastomosis plus circular myotomy in the proximal esophageal segment). The animals were killed in the 14th postoperative day, submitted to autopsy, and were evaluated as to the presence of leaks and strictures, as well as to the features (macroscopic and microscopic aspects) of the anastomosis. Leak rates were the same in both groups. Morphometric analysis revealed that in animals in the experimental group, the anastomotic scar was thinner than the control animals, and the isolated muscular manchette distal to the site of myotomy was replaced by fibrous tissue. Correspondingly, a decreased number of newly formed small vessels were noted in the experimental animals, compared to control animals. We concluded that circular myotomy does not decrease the incidence of anastomotic leaks, and it also promotes deleterious changes in anastomotic healing.

As forças de tipo gendarmerie e as operações/missões de gestão de crises da União Europeia

The European Union has taken in recent years an increasingly important role in ensuring peace and stability in the international community, and the security and defence policy of the Union has become synonymous with crisis management. The Union has addressed the issue of crisis management through two sources: the military side and the civilian side, which consists in carrying out numerous crisis management operations and missions. This study discusses the role of the European Union in conducting crisis management operations and missions and how the gendarmerie forces contribute to the success of the same. It will discuss the evolution of the European Union's security policy and the concept of crisis management, and seek to demonstrate the added value of the commitment of gendarmerie forces in operations and missions of crisis management, particularly with regard to employment of the European Gendarmerie Force. On the other hand, it will study the planning process for crisis management of the European Union, featuring the entities and agencies involved in it, and presenting the products that result from this same process. The use of Gendarmerie forces in crisis management operations and missions has significant advantages. Its use is recommended to post - conflict scenarios, in complementarity with the armed forces, in order to overcome the "security gap" that mediates the transition from the state of conflict for the period of peace and reconstruction. Gendarmerie forces can also be engaged both in military crisis management operations and civilian crisis management missions.

Study of AC losses in medium-sized high temperature superconducting coils

The study of AC losses in superconducting pancake coils is of utmost importance for the development of superconducting devices. Due to different technical difficulties this study is usually performed considering one of two approaches: considering superconducting coils of few turns and studying AC losses in a large frequency range vs. superconducting coils with a large number of turns but measuring AC losses only in low frequencies. In this work, a study of AC losses in 128 turn superconducting coils is performed, considering frequencies ranging from 50 Hz till 1152 Hz and currents ranging from zero till the critical current of the coils. Moreover, the study of AC losses considering two different simultaneous harmonic components is also performed and results are compared to the behaviour presented by the coils when operating in a single frequency regime. Different electrical methods are used to verify the total amount of AC losses in the coil and a simple calorimetric method is presented, in order to measure AC losses in a multi-harmonic context. Different analytical and numerical methods are implemented and/or used, to design the superconducting coils and to compute the total amount of AC losses in the superconducting system and a comparison is performed to verify the advantages and drawbacks of each method.

Microstructural changes befor macroeconomic announcements: Predictability of economic surprises in the U.S. market

Flow of new information is what produces price changes, understanding if the market is unbalanced is fundamental to know how much inventory market makers should keep during an important economic release. After identifying which economic indicators impact the S&P and 10 year Treasuries. The Volume Synchronized Probability of Information-Based Trading (VPIN) will be used as a predictability measure. The results point to some predictability power over economic surprises of the VPIN metric, mainly when calculated using the S&P. This finding appears to be supported when analysing depth imbalance before economic releases. Inferior results were achieved when using treasuries. The final aim of this study is to fill the gap between microstructural changes and macroeconomic events.

Quadratic programming versus second order con programming in portfolio optimization

Despite the extensive literature in finding new models to replace the Markowitz model or trying to increase the accuracy of its input estimations, there is less studies about the impact on the results of using different optimization algorithms. This paper aims to add some research to this field by comparing the performance of two optimization algorithms in drawing the Markowitz Efficient Frontier and in real world investment strategies. Second order cone programming is a faster algorithm, appears to be more efficient, but is impossible to assert which algorithm is better. Quadratic Programming often shows superior performance in real investment strategies.

What should Fundação Calouste Gulbenkian do in order to attract the National Millennials?

Branding Lab

Which communication strategy should a male luxury (fashion) brand – associated with a luxury car brand – develop, in order to increase its awareness in Europe

This work project explores how a male luxury (fashion) brand (subsidiary) that is associated with a luxury car brand (parent company) should develop its communication strategy in order to increase awareness in Europe. For this purpose a quantitative research was conducted. The aim was to find out whether the company in question had low brand awareness among European luxury consumers. Hereafter, a qualitative research revealed important insights in regard to luxury communication among male luxury consumers. Both the results of the research and the recommendations of luxury experts laid the foundation for the development of a solution-oriented communication strategy. The result of the analysis crystallizes the importance of the shared heritage and the synergistic effects, of which the subsidiary should make vast use when communicating.

Towards a knowledge society

Economies are moving towards competitive stadiums based on knowledge and innovation. The changing environment and the level of globalization demand important efforts in order to sustain competitive advantages. Portugal has experienced a remarkable evolution since its adhesion to the European Union in several fields: economic development, Research & Development (R&D) consolidation, health parameters and social cohesion. As other developed economies, Portugal started its journey towards a knowledge-based economy and has been consolidating an innovation system during the last 35 years. The following report aims to analyze the evolution of a system since its creation to its last transformation within a globalized context. Challenges such as the lack of maturity of the system, the economic crisis, the European paradox, and closing the gap with other European countries are addressed in the next chapters. Likewise, recommendations on these points are provided by the end of the report as potential solutions.

Sustained competitive advantage of different sized multinational corporations in rural base of the pyramid markets

This thesis explores how multinational corporations of different sizes create barriers to imitation and therefore sustain competitive advantage in rural and informal Base of the Pyramid economies. These markets require close cooperation with local partners in a dynamic environment that lacks imposable property rights and follows a different rationale than developed markets. In order to explore how competitive advantage is sustained by different sized multinational corporations at the Base of the Pyramid, the natural-resource-based view and the dynamic capabilities perspective are integrated. Based on this integration the natural-resource-based view is extended by identifying critical dynamic capabilities that are assumed to be sources of competitive advantage at the Base of the Pyramid. Further, a contrasting case study explores how the identified dynamic capabilities are protected and their competitive advantage is sustained by isolating mechanisms that create barriers to imitation for a small to medium sized and a large multinational corporation. The case study results give grounds to assume that most resource-based isolating mechanisms create barriers to imitation that are fairly high for large and established multinational corporations that operate at the rural Base of the Pyramid and have a high product and business model complexity. On the contrary, barriers to imitation were found to be lower for young and small to medium sized multinational corporations with low product and business model complexity that according to some authors represent the majority of rural Base of the Pyramid companies. Particularly for small to medium sized multinational corporations the case study finds a relationship- and transaction-based unwillingness of local partners to act opportunistically rather than a resource-based inability to imitate. By offering an explanation of sustained competitive advantage for small to medium sized multinational corporations at the rural Base of the Pyramid this thesis closes an important research gap and recommends to include institutional and transaction-based research perspectives.

Palhetas simples: técnicas de manutenção para aplicação na interpretação e pedagogia do clarinete

Relatório de estágio de mestrado em Ensino da Música

Three-phase three-level current-source converter for EVs fast battery charging systems

This paper presents a three-phase three-level fast battery charger for electric vehicles (EVs) based in a current-source converter (CSC). Compared with the traditional voltage-source converters used for fast battery chargers, the CSC can be seen as a natural buck-type converter, i.e., the output voltage can assume a wide range of values, which varies between zero and the maximum instantaneous value of the power grid phase-to-phase voltage. Moreover, using the CSC it is not necessary to use a dc-dc back-end converter in the battery side, and it is also possible to control the grid current in order to obtain a sinusoidal waveform, and in phase with the power grid voltage (unitary power factor). Along the paper is described in detail the proposed CSC for EVs fast battery charging systems: the circuit topology, the power control theory, the current control strategy and the grid synchronization algorithm. Several simulation results of the EV fast battery charger operating with a maximum power of 50 kW are presented.

Task clustering on ETL systems – A pattern-oriented approach

Usually, data warehousing populating processes are data-oriented workflows composed by dozens of granular tasks that are responsible for the integration of data coming from different data sources. Specific subset of these tasks can be grouped on a collection together with their relationships in order to form higher- level constructs. Increasing task granularity allows for the generalization of processes, simplifying their views and providing methods to carry out expertise to new applications. Well-proven practices can be used to describe general solutions that use basic skeletons configured and instantiated according to a set of specific integration requirements. Patterns can be applied to ETL processes aiming to simplify not only a possible conceptual representation but also to reduce the gap that often exists between two design perspectives. In this paper, we demonstrate the feasibility and effectiveness of an ETL pattern-based approach using task clustering, analyzing a real world ETL scenario through the definitions of two commonly used clusters of tasks: a data lookup cluster and a data conciliation and integration cluster.

A relational algebra approach to ETL modeling

The MAP-i Doctoral Programme in Informatics, of the Universities of Minho, Aveiro and Porto

A sixth-order finite volume method for the 1D biharmonic operator: application to intramedullary nail simulation

A new very high-order finite volume method to solve problems with harmonic and biharmonic operators for one- dimensional geometries is proposed. The main ingredient is polynomial reconstruction based on local interpolations of mean values providing accurate approximations of the solution up to the sixth-order accuracy. First developed with the harmonic operator, an extension for the biharmonic operator is obtained, which allows designing a very high-order finite volume scheme where the solution is obtained by solving a matrix-free problem. An application in elasticity coupling the two operators is presented. We consider a beam subject to a combination of tensile and bending loads, where the main goal is the stress critical point determination for an intramedullary nail.