Environment, health and safety policy in small construction sites: an analysis of the situation in Brazil

This paper analyzes the safety, environmental and occupational health of workers in the small construction industry in Brazil. In this sector there are still many unsafe practices, which are very common in small work sites. We used a qualitative approach to understand these problems by long interviews with people who work directly in small construction sites, including occupational physicians, civil engineers, safety engineers, safety technicians, general foremen, construction workers, labor unionists and auditors. This paper aims to demonstrate that the "invisibility" of the small sites workers makes them less safe and therefore more prone to accidents, also weakening their health. The results show that small constructions workers are less visible to society and supervision because of their short periods of work. Therefore, they are also uncovered to the rigorous applicability of principles of safety and accident prevention. Thus, it has been seen in this field of work a precarious application of NR - 18, which was specifically made for the construction sites and it needs simplification to meet normative characteristics of small construction sites. In the State of Rio de Janeiro, some laws on small sites were recently created and implemented. This study concludes that the rules to work are not being taken as seriously as the legislation determinates, remaining practically unknown by many professionals, from the plot command, supervisors, engineers, architects and technicians who work on construction sites. This ignorance creates space for the lack of safety and consequently to accidents, leading to by weakness in the workers health. Therefore, the work process needs to be modified, the safety regulation must be disseminated through safer practices, promoting employee health and ensure that the work of small sites can be visible, especially ensuring the construction workers health and safety.

Impacto da alteração de um sistema de turnos semicontínuo para laboração contínua

Dissertação de mestrado integrado em Psicologia

Da carreira às trajetórias de inserção profissional: o caso dos licenciados em educação de infância e em ensino básico (1.º ciclo), pela Universidade do Minho, entre 2001 e 2010

Tese de doutoramento em Estudos da Criança (área de especialização em Formação de Professores).

Mechanical fatigue performance of PCL-chondroprogenitor constructs after cell culture under bioreactor mechanical stimulus

In tissue engineering of cartilage, polymeric scaffolds are implanted in the damaged tissue and subjected to repeated compression loading cycles. The possibility of failure due to mechanical fatigue has not been properly addressed in these scaffolds. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. This is related to inherent discontinuities in the material due to the micropore structure of the macro-pore walls that act as stress concentration points. In this work, chondrogenic precursor cells have been seeded in Poly-ε-caprolactone (PCL) scaffolds with fibrin and some were submitted to free swelling culture and others to cyclic loading in a bioreactor. After cell culture, all the samples were analyzed for fatigue behavior under repeated loading-unloading cycles. Moreover, some components of the extracellular matrix (ECM) were identified. No differences were observed between samples undergoing free swelling or bioreactor loading conditions, neither respect to matrix components nor to mechanical performance to fatigue. The ECM did not achieve the desired preponderance of collagen type II over collagen type I which is considered the main characteristic of hyaline cartilage ECM. However, prediction in PCL with ECM constructs was possible up to 600 cycles, an enhanced performance when compared to previous works. PCL after cell culture presents an improved fatigue resistance, despite the fact that the measured elastic modulus at the first cycle was similar to PCL with poly(vinyl alcohol) samples. This finding suggests that fatigue analysis in tissue engineering constructs can provide additional information missed with traditional mechanical measurements.

Effect of the acoustic impedance in ultrasonic emitter transducers using digital modulations

In an underwater environment it is difficult to implement solutions for wireless communications. The existing technologies using electromagnetic waves or lasers are not very efficient due to the large attenuation in the aquatic environment. Ultrasound reveals a lower attenuation, and thus has been used in underwater long-distance communications. The much slower speed of acoustic propagation in water (about 1500 m/s) compared with that of electromagnetic and optical waves, is another limiting factor for efficient communication and networking. For high data-rates and real-time applications it is necessary to use frequencies in the MHz range, allowing communication distances of hundreds of meters with a delay of milliseconds. To achieve this goal, it is necessary to develop ultrasound transducers able to work at high frequencies and wideband, with suitable responses to digital modulations. This work shows how the acoustic impedance influences the performance of an ultrasonic emitter transducer when digital modulations are used and operating at frequencies between 100 kHz and 1 MHz. The study includes a Finite Element Method (FEM) and a MATLAB/Simulink simulation with an experimental validation to evaluate two types of piezoelectric materials: one based on ceramics (high acoustic impedance) with a resonance design and the other based in polymer (low acoustic impedance) designed to optimize the performance when digital modulations are used. The transducers performance for Binary Amplitude Shift Keying (BASK), On-Off Keying (OOK), Binary Phase Shift Keying (BPSK) and Binary Frequency Shift Keying (BFSK) modulations with a 1 MHz carrier at 125 kbps baud rate are compared.

Students’ perceptions of competencies by the end of a masters’ degree

Os modelos atuais de empregabilidade, abrangentes e complexos, incluem não apenas o conjunto de competências técnicas e transversais necessárias à integração no mercado de trabalho, mas consideram também uma componente subjetiva que integra as crenças e atitudes individuais. Apresentam-se os resultados preliminares de um estudo centrado nas perceções de competências e preparação para o mercado de trabalho, realizado com 214 alunos, finalistas de mestrado. Os resultados obtidos apontam para uma elevada correlação entre competências práticas, competências de empregabilidade, preparação e expectativas de sucesso na transição para o trabalho. Realça-se ainda a importância da integração de uma componente prática nos currículos educativos.

Desenvolvimento de um modelo de rotatividade numa indútria do setor Metalomecânico

Dissertação de mestrado em Engenharia Humana

Redes de inovação em pequenas e médias empresas: um estudo de caso no setor têxtil

Dissertação de mestrado em Engenharia Industrial

Performance assessment of electrically small antennas for implantable microsystems with wireless power and communications

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)

Benchmarking sobre técnicas de otimização para modelos de apoio à decisão na medicina intensiva

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

Seguidor do ponto de máxima potência multi-conversor para sistemas solares fotovoltaicos

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

Contributos dos doutores palhaços da Operação Nariz Vermelho para a qualidade da adaptação e do desenvolvimento em contexto pediátrico: o olhar da criança e seus pais

Tese de doutoramento em Ciências da Educação (Área Especialidade em Psicologia da Educação)

A five year follow-up study of 11 patients with bipolar disorder

OBJECTIVE: To study the long-term follow-up of patients with bipolar disorder (BPD). METHOD: Eleven outpatients with BPD type I were followed up naturalistically for five years at a university teaching hospital. The Clinical Global Impression Scale (BPD version) was used to evaluate the occurrence of affective episodes, and the Strauss-Carpenter Outcome Scale was used to evaluate social and occupational functioning. RESULTS: The majority of patients were symptomatic most of the time, with predominantly depressive episodes. Overall, patients remained euthymic a mean of 47.7% of the time. Despite a low rate of hospitalization, social and occupational functioning was poor in the majority of patients. A poor disease course with respect to work-related functioning was associated with fewer months of euthymia with a longer duration of depressive episodes. The total number of months of euthymia negatively correlated with the patient's age and disease duration. CONCLUSION: Despite the small sample size, the present findings appear to corroborate previous studies on the evolution of BPD. Most of the patients had a poor disease course, with long symptomatic periods, particularly depressive episodes, and significantly impaired social and occupational functioning.

Formação e avaliação de desempenho: contributos para o desenvolvimento profissional

Tese de Doutoramento em Ciências da Educação (Especialidade em Desenvolvimento Curricular)

Hand gesture recognition system based in computer vision and machine learning: Applications on human-machine interaction

Tese de Doutoramento em Engenharia de Eletrónica e de Computadores