The use of mo and cu monochromatic radiations for quantitative phase analysis: study of the accuracy

Cement hydration is a very complex process in which crystalline phases are dissolving in water and after supersaturation hydrated crystalline and amorphous phases precipitate. Great efforts are being made to develop analytical tools to accurately quantify these processes and X-ray Powder Diffraction (XRPD) combined with Rietveld methodology is a suitable tool to quantify these complex mixtures and their time evolutions. However, some problems/drawbacks should be overcome to fully apply it to cement pastes characterization in order to get accurate phase analyses. In order to tackle this issue, a comparison of the Rietveld quantitative phase analyses (RQPA) obtained using Cu-Kα1, Mo-Kα1, and synchrotron strictly monochromatic radiations of three set of mixtures with increasing amounts of a given phase (spiking-method) is presented. The main aim is to test a simple hypothesis: high energy Mo-radiation, combined with high resolution laboratory X-ray powder diffraction optics, could yield more accurate RQPA, for challenging samples, than well-established Cu-radiation procedure(s). Firstly, a series of crystalline inorganic phase mixtures with increasing amounts of an analyte was studied in order to determine if Mo-Kα1 methodology is as robust as the well-established Cu-Kα1 one. Secondly, a series of crystalline organic phase mixtures with increasing amounts of an organic compound was analyzed. This type of mixture can result in transparency problems in reflection and inhomogeneous loading in narrow capillaries for transmission studies. Finally, a third series with variable amorphous content was studied. Limit of detection in Cu-patterns, ~0.2 wt%, are slightly lower than those derived from Mo-patterns, ~0.3 wt%, for similar recording times and limit of quantification for a well crystallized inorganic phase using laboratory powder diffraction was established ~0.10 wt%. From the obtained results it is inferred that RQPA from Mo-Kα1 radiation have slightly better accuracies than those obtained from Cu-Kα1. The results obtained in the previous comparison have been taken into account to obtain accurate RQPA, including the amorphous component with internal standard methodology, of hydrating cement pastes. The final goal of this second study was understanding the early-stage hydration mechanisms of a variety of cementing systems (Ordinary Portland Cement or Belite Alite Ye’elimite cement) as a function of water content, superplasticizer additives and type and content of sulfate source. In order to do so, X-ray powder diffraction data were taken in-situ with the humidity chamber coupled to the Mo-Kα1 powder diffractometer. Some results of this ongoing investigation will be reported and discussed.

Instrumentos e políticas públicas de cultura : o caso dos editais do fundo de apoio à cultura do Distrito Federal no período de 2011 a 2014

Dissertação (mestrado)—Universidade de Brasília, Centro de Estudos Avançados Multidisciplinares, Programa de Pós-Graduação em Desenvolvimento Sociedade e Cooperação Internacional, 2016.

European Agroforestry Conference. 3rd. Book of Abstracts

Agroforestry is considered nowadays as a sustainable form of land management that is being promoted by different global institutions like FAO and its Global Alliance Smart Climate Agriculture to mitigate and adaptate to Climate change. The European Commission through the protection of landscape features, greening and Rural Development Programs is promoting the essential presence of woody vegetation across Europe, but in a way that is difficult to recognize by farmers. AGROFE and AGFORWARD projects are both demonstrating the important value of Agroforestry at European level, which together with EURAF are pushing European Commission to include measures enhancing Agroforestry. However, there is a need of a European Agroforestry Strategy that recognizes the drawbacks of Agroforestry to be implemented at European level. This strategy should include the main mechanisms to show farmers how to implement it and at the same time to get funded for the important ecosystem services that they provide when implementing agroforestry. AGFORWARD project has identified the main agroforestry practices in Europe, highlighting silvopasture, but showing the importance that others forms of agroforestry have to play like homegardens with multipurpose trees, or the adequate improvement of fallow lands where woody vegetation can enhance the levels of organic matter in the soil if adequately managed. AGFORWARD also shows the lack of information of the real implementation of agroforestry practices like forest farming, in spite of the important productive and ecosystem benefits it provides. EURAF through the participation in the different civil dialogue groups (CAP, Direct Payments and Greening, Forestry and Cork, Organic Farming, Arable, Environment and Climate Change and Rural Development) has included and promoted agroforestry within the European Agenda. The role of Agroforestry has been also enhanced in the Groups of experts of European Structural and Investments funds and as part of the European Network for Rural Development and its derived groups: innovation, evaluation and CLLD/LEADER. EURAF is pleased to announce that Agroforestry will be discussed as part of a focus group of the European Innovation Partnership, so, apply and join the group. This book represents the lastest findings on agroforestry in Europe, integrating the participation of researchers but also policy makers and farmers and farmers' associations. It was a pleasure for EURAF to integrate all this needed knowledge to be disseminated at European levels. On behalf of EURAF, I wish all of you a successful meeting and invite you to strengthen agroforestry within the different European Union countries when you go back home. Rosa Mosquera-LOSADA President of EURAF

O envolvimento familiar no processo de ensino-aprendizagem dos alunos com necessidades educativas especiais : o caso da Escola de Ensino Especial de Benguela, Angola

A família é o meio natural em que a criança começa sua vida e sua aprendizagem básica por meio de uma série de estímulos e de vivências que a condicionam profundamente ao longo de toda a sua existência. A escola representa o espaço em que a criança consolida a sua aprendizagem e se prepara para vida futura. A cooperação entre família e escola constitui o pilar fundamental na construção de um processo de ensino aprendizagem de qualidade, sobre tudo para crianças com Necessidades Educativas Especiais (N.E.E). Com base nestes pressupostos o objetivo geral da presente dissertação de natureza qualitativa é aferir o impato do envolvimento familiar no processo de ensino aprendizagem dos alunos com necessidades educativas especiais na cidade de Benguela – Angola, através de inquéritos e entrevistas aplicadas a uma amostra constituída pelos familiares dos alunos, os respetivos alunos, professores e antigos gestores da única escola de Ensino Especial da cidade de Benguela. Os resultados do estudo revelaram um fraco grau de envolvimento familiar, tendo em conta as orientações da Lei, nº 13/01, Lei de Bases do Sistema de Educação (L.B.S.E), e o Decreto Presidencial nº 20/11, sobre o Estatuto da Modalidade de Educação Especial que recomendam a participação indispensável da família na elaboração dos programas (E.M.E.E) educativos dos alunos com N.E.E, bem como os resultados de estudos que ressaltam a importância da relação escola e família para melhoria da qualidade do Ensino Especial em Angola. A dissertação constitui uma abordagem pioneira no contexto em que se insere e o seu valor prático é determinado pelo contributo que os seus resultados podem aportar a compreensão e melhoria da qualidade de ensino e das relações familiares dos alunos com N.E.E num contexto fortemente marcado por barreiras culturais e tradicionais.

Development of combined acidification and separation of slurry: effect on slurry fractions composition and gaseous emission

Doutoramento em Engenharia do Ambiente - Instituto Superior de Agronomia - UL

Chemical changes and heavy metal partitioning in an oxisol cultivated with maize (Zea mays, L.) after 5 years disposal of a domestic and an industrial sewage sludge.

The need for solutions to minimize the negative environmental impacts of anthropogenic activities Fhas increased. Sewage sludge is composed of predominantly organic matter and can be used to improve soil characteristics, such as fertility. Therefore, its application in agriculture is an adequate alternative for its final disposal. However, there is a lack of information on its long-term effects on soil changes in tropical areas. Thus, the objectives of this study were to determine (i) the effect of sewage sludge application on heavy metal build-up in soil and maize grains and leaves, and (ii) the effects of soil amendment with sewage sludge on the chemical properties of a Brazilian oxisol. Besides the increasing levels of Zn, Cu, Ni, and Cr, amending soil with sewage sludge also alters the distribution of these metals by increasing the mobile Phases, which correlated significantly with the increase in metal extraction with two single extractants, Mehlich 1 and DTPA (Diethylene triamine pentaacetic acid). The levels of Fe, Mn, Zn, and Cu in maize grains and leaves increased with the type and rate of sewage sludge application. Nevertheless, metal build-up in soil and plants was within the allowed limits. Significant differences were also found in soil characteristics like humic fractionation with the applied sewage doses. The data obtained does not indicate any expressive drawbacks in the use of sewage sludge as a soil amendment, as the heavy metal concentrations observed are unlikely to cause any environmental or health problems, even overestimated loadings, and are in accordance with the Brazilian regulations on farming land biosolid disposal.

Avoiding staff removal stage in optical music recognition: application to scores written in white mensural notation

Staff detection and removal is one of the most important issues in optical music recognition (OMR) tasks since common approaches for symbol detection and classification are based on this process. Due to its complexity, staff detection and removal is often inaccurate, leading to a great number of errors in posterior stages. For this reason, a new approach that avoids this stage is proposed in this paper, which is expected to overcome these drawbacks. Our approach is put into practice in a case of study focused on scores written in white mensural notation. Symbol detection is performed by using the vertical projection of the staves. The cross-correlation operator for template matching is used at the classification stage. The goodness of our proposal is shown in an experiment in which our proposal attains an extraction rate of 96 % and a classification rate of 92 %, on average. The results found have reinforced the idea of pursuing a new research line in OMR systems without the need of the removal of staff lines.

Modeling and analysis of thermoelectric energy conversion efficiency in nanostructures.

116 p.

Running in the Family – Paternalism and Familiness in the Development of Family Businesses

The study focuses on two features of family businesses (FBs), namely familiness and paternalism. These two concepts are inseparable in two ways: inseparable from family businesses and also from each other. Family businesses differ from one another in the degree of family involvement, leadership and management in the business. Paternalism as a leadership attitude is naturally present in FBs, especially in the founding stage of development. This feature provides the solid bases for establishing a strong and proud culture built around the personality and success of the founder. This characteristic however can become a major hindering factor upon succession. Through a review of the literature and the INSIST studies for Central Europe this study aims to identify the supportive and limiting factors of both phenomena and examine the case studies of the INSIST research project for signs of the existence of these supportive and limiting factors. It is found that the degree of familiness in these firms is a sliding scale and a lack of familiness is not a precursor for failure. Paternalism is found to be broken down into authoritarian, benevolent, moral and enlightened. After discovering studies claiming that paternalism is a stage in the process of leadership style changing from participative to autocratic (or vice versa) and that Central Europe and the current era of instability and uncertainty lead to employees preferring a more autocratic or paternalistic style, our findings suggest that there are more driving than restraining forces for family firms adopting a paternalistic style. Furthermore many cases appear to be on the path from an authoritative towards a more enlightened paternalistic leadership style either out of choice in the search to shake off the drawbacks of other types of paternalism or as part of a natural evolution of this particular leadership style within the context of this study.

EVALUATION OF POTENTIAL TRANSLOAD FACILITY LOCATIONS IN THE UPPER PENINSULA (UP) OF MICHIGAN

Shippers want to improve their transportation efficiency and rail transportation has the potential to provide an economical alternative to trucking, but it also has potential drawbacks. The pressure to optimize transportation supply chain logistics has resulted in growing interest in multimodal alternatives, such as a combination of truck and rail transportation, but the comparison of multimodal and modal alternatives can be complicated. Shippers in Michigan’s Upper Peninsula (UP) face similar challenges. Adding to the challenge is the distance from major markets and the absence of available facilities for transloading activities. This study reviewed three potential locations for a transload facility (Nestoria, Ishpeming, and Amasa) where truck shipments could be transferred to rail and vice versa. These locations were evaluated on the basis of transportation costs for shippers when compared to the use of single mode transportation by truck to Wisconsin, Chicago, Minneapolis, and Sault Ste. Marie. In addition to shipping costs, the study also evaluated the potential impact of future carbon emission penalties on the shipping cost and the effects of changing fuel prices on shipping cost. The study used data obtained from TRANSEARCH database (2009) and found that although there were slight differences between percent savings for the three locations, any of them could provide potential benefits for movements to Chicago and Minneapolis, as long as final destination could be accessed by rail for delivery. Short haul movements of less than 200 miles (Wisconsin and Sault Ste. Marie) were not cost effective for multimodal transport. The study also found that for every dollar increase in fuel price, cost savings from multimodal option increased by three to five percent, but the inclusion of emission costs would only add one to two percent additional savings. Under a specific case study that addressed shipments by Northern Hardwoods, the most distant locations in Wisconsin would also provide cost savings, partially due to the possibility of using Michigan trucks with higher carrying capacity for the initial movement from the facility to transload location. In addition, Minneapolis movements were found to provide savings for Northern Hardwoods, even without final rail access.

SME Policy and Competitiveness in Hungary

Small and medium-sized (SMEs) enterprises in Hungary account for 99.9% of all enterprises and for more than two thirds of employment. Since transformation started in 1989 they have been the only net makers of employment. In spite of such remarkable importance, results have been modest compared to the amount of Hungarian and foreign, mostly EU resources poured into the sector. Less than a sixth of SMEs are fast-growing and only a tiny minority of SMEs make use of bank credit. According to various indicators and in spite of bright spots, the SMEs context is problematic and SMEs features are often unfavourable and hardly competitive. In recent years the goal of upgrading SMEs and strengthening their contribution to the economy has acquired central position among policy goals and activity. Although progress has been made, the results are weak and in some cases drawbacks have happened. The paper starts from analysing the SMEs situation, reviews the main features of the recently implemented policy strategies, assesses whether these strategies are appropriate to address the situation, including the effects of the domestic and international crises, and considers whether the targets pursued are realistic and important, and the instruments considered in line with the targets

Fuel level sensor based on polymer optical fiber Bragg gratings for aircraft applications

Safety in civil aviation is increasingly important due to the increase in flight routes and their more challenging nature. Like other important systems in aircraft, fuel level monitoring is always a technical challenge. The most frequently used level sensors in aircraft fuel systems are based on capacitive, ultrasonic and electric techniques, however they suffer from intrinsic safety concerns in explosive environments combined with issues relating to reliability and maintainability. In the last few years, optical fiber liquid level sensors (OFLLSs) have been reported to be safe and reliable and present many advantages for aircraft fuel measurement. Different OFLLSs have been developed, such as the pressure type, float type, optical radar type, TIR type and side-leaking type. Amongst these, many types of OFLLSs based on fiber gratings have been demonstrated. However, these sensors have not been commercialized because they exhibit some drawbacks: low sensitivity, limited range, long-term instability, or limited resolution. In addition, any sensors that involve direct interaction of the optical field with the fuel (either by launching light into the fuel tank or via the evanescent field of a fiber-guided mode) must be able to cope with the potential build up of contamination-often bacterial-on the optical surface. In this paper, a fuel level sensor based on microstructured polymer optical fiber Bragg gratings (mPOFBGs), including poly (methyl methacrylate) (PMMA) and TOPAS fibers, embedded in diaphragms is investigated in detail. The mPOFBGs are embedded in two different types of diaphragms and their performance is investigated with aviation fuel for the first time, in contrast to our previous works, where water was used. Our new system exhibits a high performance when compared with other previously published in the literature, making it a potentially useful tool for aircraft fuel monitoring.

Query routing in cooperative semi-structured peer-to-peer information retrieval networks

Conventional web search engines are centralised in that a single entity crawls and indexes the documents selected for future retrieval, and the relevance models used to determine which documents are relevant to a given user query. As a result, these search engines suffer from several technical drawbacks such as handling scale, timeliness and reliability, in addition to ethical concerns such as commercial manipulation and information censorship. Alleviating the need to rely entirely on a single entity, Peer-to-Peer (P2P) Information Retrieval (IR) has been proposed as a solution, as it distributes the functional components of a web search engine – from crawling and indexing documents, to query processing – across the network of users (or, peers) who use the search engine. This strategy for constructing an IR system poses several efficiency and effectiveness challenges which have been identified in past work. Accordingly, this thesis makes several contributions towards advancing the state of the art in P2P-IR effectiveness by improving the query processing and relevance scoring aspects of a P2P web search. Federated search systems are a form of distributed information retrieval model that route the user’s information need, formulated as a query, to distributed resources and merge the retrieved result lists into a final list. P2P-IR networks are one form of federated search in routing queries and merging result among participating peers. The query is propagated through disseminated nodes to hit the peers that are most likely to contain relevant documents, then the retrieved result lists are merged at different points along the path from the relevant peers to the query initializer (or namely, customer). However, query routing in P2P-IR networks is considered as one of the major challenges and critical part in P2P-IR networks; as the relevant peers might be lost in low-quality peer selection while executing the query routing, and inevitably lead to less effective retrieval results. This motivates this thesis to study and propose query routing techniques to improve retrieval quality in such networks. Cluster-based semi-structured P2P-IR networks exploit the cluster hypothesis to organise the peers into similar semantic clusters where each such semantic cluster is managed by super-peers. In this thesis, I construct three semi-structured P2P-IR models and examine their retrieval effectiveness. I also leverage the cluster centroids at the super-peer level as content representations gathered from cooperative peers to propose a query routing approach called Inverted PeerCluster Index (IPI) that simulates the conventional inverted index of the centralised corpus to organise the statistics of peers’ terms. The results show a competitive retrieval quality in comparison to baseline approaches. Furthermore, I study the applicability of using the conventional Information Retrieval models as peer selection approaches where each peer can be considered as a big document of documents. The experimental evaluation shows comparative and significant results and explains that document retrieval methods are very effective for peer selection that brings back the analogy between documents and peers. Additionally, Learning to Rank (LtR) algorithms are exploited to build a learned classifier for peer ranking at the super-peer level. The experiments show significant results with state-of-the-art resource selection methods and competitive results to corresponding classification-based approaches. Finally, I propose reputation-based query routing approaches that exploit the idea of providing feedback on a specific item in the social community networks and manage it for future decision-making. The system monitors users’ behaviours when they click or download documents from the final ranked list as implicit feedback and mines the given information to build a reputation-based data structure. The data structure is used to score peers and then rank them for query routing. I conduct a set of experiments to cover various scenarios including noisy feedback information (i.e, providing positive feedback on non-relevant documents) to examine the robustness of reputation-based approaches. The empirical evaluation shows significant results in almost all measurement metrics with approximate improvement more than 56% compared to baseline approaches. Thus, based on the results, if one were to choose one technique, reputation-based approaches are clearly the natural choices which also can be deployed on any P2P network.

Estructuración de los procesos y la función de recursos humanos alineados con el direccionamiento estratégico en Kathmandu restaurante

El direccionamiento estratégico está destinado para que las organizaciones cumplan con sus metas y tengan perdurabilidad en el tiempo; es una forma metodológica en la cual se establecen La formulación y el planteamiento estratégicos, se identifican las brechas entre el sueño de la empresa y su realidad, para desplegar la plata forma estratégica. Kathmandu es un restaurante conocido por su diversidad cultural gastronómica, ubicado en Usaquén al Norte de Bogotá. Su serviespacio reúne los sabores, aromas, decoración y elixires del oriente, su música incluye una fusión de sonidos que permite materializar la experiencia que quiere brindar para satisfacer las expectativas de sus comensales y brindarles una experiencia diferente. Los fines de semana presentan shows de danza de vientre, para acompañar la comida y el rato que dispongan disfrutar en este lugar. Este restaurante tiene un diferenciador en su servicio, que le ofrece una ventaja competitiva, Kathmandu brinda la posibilidad de que además del deleite de sus platos, los clientes puedan adquirir toda la decoración de este lugar, estas son artesanías originales traídas de Nepal, India, Tailandia, Indonesia y sus alrededores. Otro atrayente de este restaurante son los cocteles alusivos a las regiones del oriente, y la narguile que ofrece a sus clientes. Al pasar de los años, ciertos inconvenientes presentados en el negocio, con los clientes, el personal y las utilidades, han hecho que los gerentes se preocupen por encontrar la raíz del problema y buscar la solución óptima para perdurar en el tiempo con los mejores beneficios posibles, pues las estrategias que estaban implementando no van acorde a su misión y visión, por lo que es necesario realizar una restructuración de ciertos procesos enfocados al direccionamiento estratégico. Se realizó un análisis en una reunión junto a las directivas sobre cada área de la organización donde se evidenciaron problemas que deben ser tratados para hacer de Kathmandu una empresa más eficiente, eficaz y productiva. Y prepararla para afrontar los cambios que el tiempo le presente, en cuanto a preferencias de los clientes, competencia, entre otras, bien sean a corto, mediano o largo plazo. Algunos de los principales problemas encontrados son: el servicio al cliente, la selección adecuada de personal y capacitación de este, la falta de manejo de un conducto jerárquico y repartición de funciones entre los colaboradores, el informe adecuado sobre la inconformidad de los clientes con su solución, el manual de funciones, el manejo de inventarios y su rotación, verificación de calidad de los productos, manejo de proveedores, entre otros. Kathmandu, a pesar de tener problemas evidentes, es una empresa que por los servicios y productos que ofrece sigue generando buenas utilidades, por esto los gerentes no le habían prestado la debida atención a estos inconvenientes que están poniendo en juego la perdurabilidad de la empresa y que afecta la optimización de las utilidades y minimización de costes sin afectar la calidad brindada al cliente. El objetivo de este restaurante es que el área de recursos humanos sea restructurada en cada uno de los procesos para articularla al direccionamiento estratégico de Kathmandu; pues en esta área se generan la mayoría de los problemas presentados anteriormente. El presente proyecto pretende diseñar el direccionamiento estratégico del área recursos humanos del restaurante Kathmandu para superar la problemática identificada y garantizar la efectividad de sus procesos y adicionalmente evidenciar la creencia de éxito sostenido que se manejaba en este lugar. Este proyecto se realizara con una metodología mixta, para tener aspectos de la investigación cuantitativa y cualitativa y poder realizar una investigación más completa que lleve a una óptima solución del problema abarcado. Se utilizara el direccionamiento estratégico como herramienta para replantear el área de recursos humanos de la organización y alcanzar la efectividad en sus procesos.

Combination of product quality management and exports: The case of Colombian fruits companies

Quality management provides to companies a framework to improve quality in overall systems, reduction of costs, reallocation of resources efficiently, correct planning of strategies, prevent or correct errors in the right time and increase the performance of companies. In this text, we discuss the different theories in this field, their obligatory or non-obligatory compliance, the importance of quality management for exporting companies and a case study of a Colombian firm that its main objective is to manage quality. In conclusion, we find out that there is different types of quality management systems such as Juran’s trilogy, Deming 14 points, Six sigma, HACCP, and so on; also that companies have to manage suppliers and that quality has a positive influence on exports volume; in the case of Colombian small and medium enterprises, it can be mentioned that the majority has implemented tools regarding quality management but is not enough.