910 resultados para development of manufacturing process
Resumo:
The main objective of this work was to develop an application capable of determining the diffusion times and diffusion coefficients of optical clearing agents and water inside a known type of muscle. Different types of chemical agents can also be used with the method implemented, such as medications or metabolic products. Since the diffusion times can be calculated, it is possible to describe the dehydration mechanism that occurs in the muscle. The calculation of the diffusion time of an optical clearing agent allows to characterize the refractive index matching mechanism of optical clearing. By using both the diffusion times and diffusion of water and clearing agents not only the optical clearing mechanisms are characterized, but also information about optical clearing effect duration and magnitude is obtained. Such information is crucial to plan a clinical intervention in cooperation with optical clearing. The experimental method and equations implemented in the developed application are described in throughout this document, demonstrating its effectiveness. The application was developed in MATLAB code, but the method was personalized so it better fits the application needs. This process significantly improved the processing efficiency, reduced the time to obtain he results, multiple validations prevents common errors and some extra functionalities were added such as saving application progress or export information in different formats. Tests were made using glucose measurements in muscle. Some of the data, for testing purposes, was also intentionally changed in order to obtain different simulations and results from the application. The entire project was validated by comparing the calculated results with the ones found in literature, which are also described in this document.
Resumo:
Marine ecosystems are facing a diverse range of threats, including climate change, prompting international efforts to safeguard marine biodiversity through the use of spatial management measures. Marine Protected Areas (MPAs) have been implemented as a conservation tool throughout the world, but their usefulness and effectiveness is strongly related to climate change. However, few MPA programmes have directly considered climate change in the design, management or monitoring of an MPA network. Under international obligations, EU, UK and national targets, Scotland has developed an MPA network that aims to protect marine biodiversity and contribute to the vision of a clean, healthy and productive marine environment. This is the first study to critically analyse the Scottish MPA process and highlight areas which may be improved upon in further iterations of the network in the context of climate change. Initially, a critical review of the Scottish MPA process considered how ecological principles for MPA network design were incorporated into the process, how stakeholder perceptions were considered and crucially what consideration was given to the influence of climate change on the eventual effectiveness of the network. The results indicated that to make a meaningful contribution to marine biodiversity protection for Europe the Scottish MPA network should: i) fully adopt best practice ecological principles ii) ensure effective protection and iii) explicitly consider climate change in the management, monitoring and future iterations of the network. However, this review also highlighted the difficulties of incorporating considerations of climate change into an already complex process. A series of international case studies from British Columbia, Canada; central California, USA; the Great Barrier Reef, Australia and the Hauraki Gulf, New Zealand, were then conducted to investigate perceptions of how climate change has been considered in the design, implementation, management and monitoring of MPAs. The key lessons from this study included: i) strictly protected marine reserves are considered essential for climate change resilience and will be necessary as scientific reference sites to understand climate change effects ii) adaptive management of MPA networks is important but hard to implement iii) strictly protected reserves managed as ecosystems are the best option for an uncertain future. This work provides new insights into the policy and practical challenges MPA managers face under climate change scenarios. Based on the Scottish and international studies, the need to facilitate clear communication between academics, policy makers and stakeholders was recognised in order to progress MPA policy delivery and to ensure decisions were jointly formed and acceptable. A Delphi technique was used to develop a series of recommendations for considering climate change in Scotland’s MPA process. The Delphi participant panel was selected for their knowledge of the Scottish MPA process and included stakeholders, policy makers and academics with expertise in MPA research. The results from the first round of the Delphi technique suggested that differing views of success would likely influence opinions regarding required management of MPAs, and in turn, the data requirements to support management action decisions. The second round of the Delphi technique explored this further and indicated that there was a fundamental dichotomy in panellists’ views of a successful MPA network depending upon whether they believed the MPAs should be strictly protected or allow for sustainable use. A third, focus group round of the Delphi Technique developed a feature-based management scenario matrix to aid in deciding upon management actions in light of changes occurring in the MPA network. This thesis highlights that if the Scottish MPA network is to fulfil objectives of conservation and restoration, the implications of climate change for the design, management and monitoring of the network must be considered. In particular, there needs to be a greater focus on: i) incorporating ecological principles that directly address climate change ii) effective protection that builds resilience of the marine and linked social environment iii) developing a focused, strong and adaptable monitoring framework iv) ensuring mechanisms for adaptive management.
Resumo:
This study is concerned with the significance of Jungian and post-Jungian theory to the development of the contemporary Western Goddess Movement, which includes the various self-identified nature-based, Pagan, Goddess Feminism, Goddess Consciousness, Goddess Spirituality, Wicca, and Goddess-centred faith traditions that have seen a combined increase in Western adherents over the past five decades and share a common goal to claim Goddess as an active part of Western consciousness and faith traditions. The Western Goddess Movement has been strongly influenced by Jung’s thought, and by feminist revisions of Jungian Theory, sometimes interpreted idiosyncratically, but presented as a route to personal and spiritual transformation. The analysis examines ways in which women encounter Goddess through a process of Jungian Individuation and traces the development of Jungian and post-Jungian theories by identifying the key thinkers and central ideas that helped to shape the development of the Western Goddess Movement. It does so through a close reading and analysis of five biographical ‘rebirth’ memoirs published between 1981 and 1998: Christine Downing’s (1981) The Goddess: Mythological Images of the Feminine; Jean Shinoda Bolen’s (1994) Crossing to Avalon: A Woman’s Midlife Pilgrimage; Sue Monk Kidd’s (1996) The Dance of the Dissident Daughter: A Woman’s Journey from Christian Tradition to the Sacred Feminine; Margaret Starbird’s (1998) The Goddess in the Gospels: Reclaiming the Sacred Feminine; and Phyllis Curott’s (1998) Book of Shadows: A Modern Woman’s Journey into the Wisdom of Witchcraft and the Magic of the Goddess. These five memoirs reflect the diversity of the faith traditions in the Western Goddess Movement. The enquiry centres upon two parallel and complementary research threads: 1) critically examining the content of the memoirs in order to determine their contribution to the development of the Goddess Movement and 2) charting and sourcing the development of the major Jungian and post-Jungian theories championed in the memoirs in order to evaluate the significance of Jungian and post-Jungian thought in the Movement. The aim of this study was to gain a better understanding of the original research question: what is the significance of Jungian and post-Jungian theory for the development of the Western Goddess Movement? Each memoir is subjected to critical review of its intended audiences, its achievements, its functions and strengths, and its theoretical frameworks. Research results offered more than the experiences of five Western women, it also provided evidence to analyse the significance of Jungian and post-Jungian theory to the development of the Western Goddess Movement. The findings demonstrate the vital contributions of the analytical psychology of Carl Jung, and post-Jungians M Esther Harding, Erich Neumann, Christine Downing, E.C. Whitmont, and Jean Shinoda Bolen; the additional contributions of Sue Monk Kidd, Margaret Starbird, and Phyllis Curott, and exhibit Jungian and post-Jungian pathways to Goddess. Through a variety of approaches to Jungian categories, these memoirs constitute a literature of Individuation for the Western Goddess Movement.
Resumo:
In this dissertation I study the development of urban areas. At the aggregate level I investigate how they may be affected by climate change policies and by being designated the seat of governmental power. At the household level I study with coauthors how microfinance could improve the health of urban residents. In Chapter 1, I investigate how local employment may be affected by electricity price increases, which is a likely consequence of climate change policies. I outline how previous studies that find large, negative effects may be biased. To overcome these biases I develop a novel estimation strategy that blends border-pair regressions with the synthetic control methodology. I show the conditions for consistent estimation. Using this estimator, I find no effect of contemporaneous price changes on employment. Consistent with the longer time-frame for manufacturing decisions, I do find evidence for negative effects from perceived permanent price shocks. These estimates are much smaller than previous research has found. National capital cities are often substantially larger than other cities in their countries. In Chapter 2, I investigate whether there is a causal effect from being a capital by studying the 1960 relocation of the Brazilian capital from Rio de Janeiro to Brasília. Using a synthetic controls strategy I find that losing the capital had no significant effects on Rio de Janeiro in terms of population, employment, or gross domestic product (GDP). I find that Brasília experienced large and significant increases in population, employment, and GDP. I find evidence of large spillovers from the public to the private sector. Chapter 3 investigates how microfinance could increase the uptake of costly health goods. We study the effect of time payments (micro-loans or micro-savings) on willingness-to-pay (WTP) for a water filter among households in the slums of Dhaka, Bangladesh. We find that time payments significantly increase WTP: compared to a lump-sum up-front purchase, median WTP increases 83% with a six-month loan and 115% with a 12-month loan. We find that households are quite patient with respect to consumption of health inputs. We find evidence for the presence of credit and savings constraints.
Resumo:
The aim of this study was to model the process of development for an Online Learning Resource (OLR) by Health Care Professionals (HCPs) to meet lymphoedema-related educational needs, within an asset-based management context. Previous research has shown that HCPs have unmet educational needs in relation to lymphoedema but details on their specific nature or context were lacking. Against this background, the study was conducted in two distinct but complementary phases. In Phase 1, a national survey was conducted of HCPs predominantly in community, oncology and palliative care services, followed by focus group discussions with a sample of respondents. In Phase 2, lymphoedema specialists (LSs) used an action research approach to design and implement an OLR to meet the needs identified in Phase 1. Study findings were analysed using descriptive statistics (Phase 1), and framework, thematic and dialectic analysis to explore their potential to inform future service development and education theory. Unmet educational need was found to be specific to health care setting and professional group. These resulted in HCPs feeling poorly-equipped to diagnose and manage lymphoedema. Of concern, when identified, lymphoedema was sometimes buried for fear of overwhelming stretched services. An OLR was identified as a means of addressing the unmet educational needs. This was successfully developed and implemented with minimal additional resources. The process model created has the potential to inform contemporary leadership theory in asset-based management contexts. This doctoral research makes a timely contribution to leadership theory since the resource constraints underpinning much of the contribution has salience to current public services. The process model created has the potential to inform contemporary leadership theory in asset-based management contexts. Further study of a leadership style which incorporates cognisance of Cognitive Load Theory and Self-Determination Theory is suggested. In addition, the detailed reporting of process and how this facilitated learning for participants contributes to workplace education theory
Resumo:
The aim of this master’s thesis was to map the management accounting processes and reporting of an internal service unit. The research was conducted in energy services in a forest industry company. Research questions and the results of the study are highly specific for the case unit although some generalizable features of management accounting in internal service units under shared services were searched. The research was carried out as a qualitative action research and a single case study. Internal benchmarking was used to find best practices from other units and to get a comprehensive understanding of the financial processes of the case company. Empirical data for the study was collected with participant observation, interviews of experts and by exploring internal company documents. A literature review was conducted to outline the subject and to support the study. Although the management accounting processes of the case unit were found to be on a good level, some improvement ideas were presented. Results of the research show that the needs of the customers are in the key role in the processes of an internal service unit. Management accounting and reporting need to support the company strategy and management decision-making. To evaluate the performance of the service unit both financial and non-financial measures are needed.
Resumo:
Conventional Si complementary-metal-oxide-semiconductor (CMOS) scaling is fast approaching its limits. The extension of the logic device roadmap for future enhancements in transistor performance requires non-Si materials and new device architectures. III-V materials, due to their superior electron transport properties, are well poised to replace Si as the channel material beyond the 10nm technology node to mitigate the performance loss of Si transistors from further reductions in supply voltage to minimise power dissipation in logic circuits. However several key challenges, including a high quality dielectric/III-V gate stack, a low-resistance source/drain (S/D) technology, heterointegration onto a Si platform and a viable III-V p-metal-oxide-semiconductor field-effect-transistor (MOSFET), need to be addressed before III-Vs can be employed in CMOS. This Thesis specifically addressed the development and demonstration of planar III-V p-MOSFETs, to complement the n-MOSFET, thereby enabling an all III-V CMOS technology to be realised. This work explored the application of InGaAs and InGaSb material systems as the channel, in conjunction with Al2O3/metal gate stacks, for p-MOSFET development based on the buried-channel flatband device architecture. The body of work undertaken comprised material development, process module development and integration into a robust fabrication flow for the demonstration of p-channel devices. The parameter space in the design of the device layer structure, based around the III-V channel/barrier material options of Inx≥0.53Ga1-xAs/In0.52Al0.48As and Inx≥0.1Ga1-xSb/AlSb, was systematically examined to improve hole channel transport. A mobility of 433 cm2/Vs, the highest room temperature hole mobility of any InGaAs quantum-well channel reported to date, was obtained for the In0.85Ga0.15As (2.1% strain) structure. S/D ohmic contacts were developed based on thermally annealed Au/Zn/Au metallisation and validated using transmission line model test structures. The effects of metallisation thickness, diffusion barriers and de-oxidation conditions were examined. Contacts to InGaSb-channel structures were found to be sensitive to de-oxidation conditions. A fabrication process, based on a lithographically-aligned double ohmic patterning approach, was realised for deep submicron gate-to-source/drain gap (Lside) scaling to minimise the access resistance, thereby mitigating the effects of parasitic S/D series resistance on transistor performance. The developed process yielded gaps as small as 20nm. For high-k integration on GaSb, ex-situ ammonium sulphide ((NH4)2S) treatments, in the range 1%-22%, for 10min at 295K were systematically explored for improving the electrical properties of the Al2O3/GaSb interface. Electrical and physical characterisation indicated the 1% treatment to be most effective with interface trap densities in the range of 4 - 10×1012cm-2eV-1 in the lower half of the bandgap. An extended study, comprising additional immersion times at each sulphide concentration, was further undertaken to determine the surface roughness and the etching nature of the treatments on GaSb. A number of p-MOSFETs based on III-V-channels with the most promising hole transport and integration of the developed process modules were successfully demonstrated in this work. Although the non-inverted InGaAs-channel devices showed good current modulation and switch-off characteristics, several aspects of performance were non-ideal; depletion-mode operation, modest drive current (Id,sat=1.14mA/mm), double peaked transconductance (gm=1.06mS/mm), high subthreshold swing (SS=301mV/dec) and high on-resistance (Ron=845kΩ.μm). Despite demonstrating substantial improvement in the on-state metrics of Id,sat (11×), gm (5.5×) and Ron (5.6×), inverted devices did not switch-off. Scaling gate-to-source/drain gap (Lside) from 1μm down to 70nm improved Id,sat (72.4mA/mm) by a factor of 3.6 and gm (25.8mS/mm) by a factor of 4.1 in inverted InGaAs-channel devices. Well-controlled current modulation and good saturation behaviour was observed for InGaSb-channel devices. In the on-state In0.3Ga0.7Sb-channel (Id,sat=49.4mA/mm, gm=12.3mS/mm, Ron=31.7kΩ.μm) and In0.4Ga0.6Sb-channel (Id,sat=38mA/mm, gm=11.9mS/mm, Ron=73.5kΩ.μm) devices outperformed the InGaAs-channel devices. However the devices could not be switched off. These findings indicate that III-V p-MOSFETs based on InGaSb as opposed to InGaAs channels are more suited as the p-channel option for post-Si CMOS.
Resumo:
The intestinal tract is exposed to a large variety of antigens such as food proteins, commensal bacteria and pathogens and contains one of the largest arms of the immune system. The intestinal immune system has to discriminate between harmless and harmful antigens, inducing tolerance to harmless antigens and active immunity towards pathogens and other harmful materials. Dendritic cells (DC) in the mucosal lamina propria (LP) are central to this process, as they sample bacteria from the local environment and constitutively migrate to the draining mesenteric lymph nodes (MLN), where they present antigen to naïve T cells in order to direct an appropriate immune response. Despite their crucial role, understanding the function and phenotype of LP DC has been hampered by the fact that they share phenotypic markers with macrophages (mφ), which are the dominant population of mononuclear phagocyte (MP) in the LP. Recent work in our own and other laboratories has established gating strategies and phenotyping panels that allow precise discrimination between intestinal DC and mφ using the mφ specific markers CD64 and F4/80. In this way four bona fide DC subsets with distinct functions have been identified in adult LP based on their expression of CD11b and CD103 and a major aim of my project was to understand how these subsets might develop in the neonatal intestine. At the beginning of my PhD, the laboratory had used these new methods to show that signal regulatory protein α (SIRPα), an inhibitory receptor expressed by myeloid cells, was expressed by mφ and most DC in the intestine, except for those expressing CD103 alone. In addition, mice carrying a non-signalling mutation in SIRPα (SIRPα mt) had a selective reduction in CD103+CD11b+ DC, a subset which is unique to the intestinal LP. This was the basis for the initial experiments of my project, described in Chapter 3, where I investigated if the phenotype in SIRPα mt mice was intrinsic to haematopoietic cells or not. To explore this, I generated bone marrow (BM) chimeric mice by reconstituting irradiated WT mice with SIRPα mt BM, or SIRPα mt animals with WT BM. These experiments suggested that the defect in CD103+CD11b+ DC was not replicated in DC derived from BM of SIRPα origin. However as this seemed inconsistent with other data, I considered the possibility that 18 the phenotype may have been lost with age, as the BM chimeric mice were considerably older than those used in the original studies of SIRPα function. However a comparison of DC subsets in the intestine of WT and SIRPα mt mice as they aged provided no conclusive evidence to support this idea. As these experiments did show age-dependent effects on DC subsets, in Chapter 4, I went on to investigate how the DC populations appeared in the intestine and other tissues in the neonatal period. These experiments showed there were few CD103+CD11b+ DC present in the LP and migratory DC compartment of the MLN in the neonate and that as this population gradually increased in proportion with age, there was a reciprocal decrease in the relative proportion of CD103-CD11b+ DC. Interestingly, most of the changes in DC numbers in the intestine were found during the second or third week of life when the weaning process began. To validate my findings that there were few CD103+CD11b+ DC in the neonate and that this was not merely an absence of CD103 upregulation, I examined the expression of CD101 and Trem-1, markers that other work in the laboratory had suggested were specific to the CD103+CD11b+ DC lineage. My work showed that CD101 and Trem-1 were co- expressed by most CD103+CD11b+ DC in small intestine (SI) LP, as well as a small subset of CD103-CD11b+ DC in this tissue. Interestingly, Trem-1 was highly specific to the SI LP and migratory DC in the MLN, but absent from the colon and other tissues. CD101 expression was also only found on CD11b+ DC, but showed a less restricted pattern of distribution, being found in several tissues as well as the SI LP. The relative timing of their development suggested there might be a relationship between CD103+CD11b+ and CD103-CD11b+ DC and this was supported by microarray analysis. I hypothesised that the CD103-CD11b+ DC that co-expressed CD101 and Trem-1 may be the cells that developed into CD103+CD11b+ DC. To investigate this I analysed how CD101 and Trem-1 expression changed with age amongst the DC subsets in SI LP, colonic LP (CLP) and MLN. The proportion of CD101+Trem-1+ cells increased amongst CD103+CD11b+ DC in the SI LP and MLN with age, while amongst CD103+CD11b+ DC in the CLP this decreased. This was not the same in CD103-CD11b+ DC, where CD101 and Trem-1 expression was more varied with age in all tissues. CD101 and Trem-1 were not expressed to any great extent on CD103+CD11b- or CD103-CD11b- DC. The phenotypic development of the 19 intestinal DC subsets was paralleled by the gradual upregulation of CD103 expression, while the production of retinoic acid (RA), as assessed by the AldefluorTM assay, was low early in life and did not attain adult levels until after weaning. Thus DC in the neonatal intestine take some time to acquire the adult pattern of phenotypic subsets and are functionally immature compared with their adult counterparts. In Chapter 5, I used CD101 and Trem-1 to explore the ontogeny of intestinal DC subsets in CCR2-/- and SIRPα mt mice, both of which have selective defects in one particular group of DC. The selective defect seen amongst CD103+CD11b+ DC in adult SIRPα mt mice was more profound in mice at D7 and D14 of age, indicating that it may be intrinsic to this population and not highly dependent on environmental factors that change after birth. The expression of CD101 and Trem-1 by both CD103+CD11b+ and CD103-CD11b+ DC was reduced in SIRPα mt mice, again indicating that this entire lineage was affected by the lack of SIRPα signalling. However there was also a generalised defect in the numbers of all DC subsets in many tissues from early in life, suggesting there was compromised development, recruitment or survival of DC in the absence of SIRPα signalling. In contrast to the findings in SIRPα mt mice, more CD103+CD11b+ DC co-expressed CD101 and Trem-1 in CCR2-/- mice, while there were no differences in the expression of these molecules amongst CD103-CD11b+ DC. This may suggest that CCR2+ CD103-CD11b+ DC are not the cells that express CD101 and Trem-1 that are predicted to be the direct precursors of CD103+CD11b+ DC. I also examined the expression of DC growth factor receptors on DC subsets from mice of different ages, but no clear age or subset- related patterns of the expression of mRNA for Csf2ra, Irf4, Tgfbr1 and Rara could be observed. Next, I investigated whether Trem-1 played any role in DC development. Preliminary experiments in Trem-1-/- mice show no differences between any of the DC subsets, nor were there any selective effects on individual subsets when DC development from Trem-1-/- KO and WT BM was compared in competitive chimeras. However these experiments were difficult to interpret due to viability problems and because I found an unexpected defect in the ability of Trem-1-/- BM to generate all DC, irrespective of whether they expressed Trem-1 or not. 20 The final experiments I carried out were to examine the role of the microbiota in driving the differentiation of intestinal DC subsets, based on the hypothesis that this could be one of the environmental factors that might influence events in the developing intestine. To this end I performed experiments in both antibiotic treated and germ free adult mice, both of which showed no significant phenotypic differences amongst any of the DC subsets. However the study of germ free mice was compromised by recent contamination of the colony and may not be the conclusive answer. Together the data in this thesis have shown that the population of CD103+CD11b+ DC, which is unique to the intestine, is not present at birth. These cells gradually increase in frequency over time and as this occurs there is a reciprocal decrease in the frequency of CD103-CD11b+ DC. Along with other results, this leads to the idea that there may be a linear developmental pathway from CD103-CD11b+ DC to CD103+CD11b+ DC that is driven by non-microbial factors that are located preferentially in the small intestine. My project indicates that markers such as CD101 and Trem-1 may assist the dissection of this process and highlights the importance of the neonatal period for these events.
Resumo:
This study investigates the development of relationships in same global virtual team working on different projects. The purpose is to explore how do interpersonal relationships develop in terms of characteristics of virtuality and if there is any influence of project lifespan on the development of these relationships. Since relationships are dynamic in nature and are influenced by multiple levels of variables including individual, group and organizational level, therefore characteristics of virtuality have been considered from all these aspects so as to study their influence on development of relationships. In this study, relationships have been studied at two different levels. At first, dyadic relationships between two members of a GVT have been analyzed and thereafter, focus has been on the development of relationships among the team, based on these dyads. Characteristics having influence on development of relationships include trust, physical distance, time zone difference, cultural and language differences, level of formalization in the organization and means of communication used by team members. Level of formalization and means of communication are two characteristics which emerged after empirical study and are found to have direct influence on development of relationships. Remaining characteristics have been identified through literature review. In order to conduct the study, qualitative methodology has been applied. Empirical data has been collected based on a single case study while using semi-structured interviews as data gathering technique. Data analysis has been performed by applying thematic analysis along with the utilization of company documents such as work sheets, minutes of meetings and recordings of conferences. Findings of the study indicate that development of relationships, both at dyadic level and team level, is influenced by different events taking place among different members of GVT. These events have either positive or negative influence on the characteristics of virtuality, which leads to development of the relationships. It has been found that, trust, among all factors plays a greater role in development of these relations. Contrary to the belief that most conflicts arise among members of different cultures, they are equally likely to happen among the members from same culture in GVT environment. Study suggests that relationship development is not a smooth process but it fluctuates based on different events in teams. For further research, teams within large firms shall be studied along these lines. This study is an early attempt towards bringing different characteristics of virtuality together which previously, have been studied individually. It is therefore plausible to conduct similar studies so as to generalize the findings of this study which has provided a starting point.
Resumo:
INTRODUCTION: In common with much of the developed world, Scotland has a severe and well established problem with overweight and obesity in childhood with recent figures demonstrating that 31% of Scottish children aged 2-15 years old were overweight including obese in 2014. This problem is more pronounced in socioeconomically disadvantaged groups and in older children across all economic groups (Scottish Health Survey, 2014). Children who are overweight or obese are at increased risk of a number of adverse health outcomes in the short term and throughout their life course (Lobstein and Jackson-Leach, 2006). The Scottish Government tasked all Scottish Health Boards with developing and delivering child healthy weight interventions to clinically overweight or obese children in an attempt to address this health problem. It is therefore imperative to deliver high quality, affordable, appropriately targeted interventions which can make a sustained impact on children’s lifestyles, setting them up for life as healthy weight adults. This research aimed to inform the design, readiness for application and Health Board suitability of an effective primary school-based curricular child healthy weight intervention. METHODS: the process involved in conceptualising a child healthy weight intervention, developing the intervention, planning for implementation and subsequent evaluation was guided by the PRECEDE-PROCEED Model (Green and Kreuter, 2005) and the Intervention Mapping protocol (Lloyd et al. 2011). RESULTS: The outputs from each stage of the development process were used to formulate a child healthy weight intervention conceptual model then develop plans for delivery and evaluation. DISCUSSION: The Fit for School conceptual model developed through this process has the potential to theoretically modify energy balance related behaviours associated with unhealthy weight gain in childhood. It also has the potential to be delivered at a Health Board scale within current organisational restrictions.
Resumo:
The purpose of this research is to discover development points for business processes and sales reporting in the recovered paper sourcing organization. The processes under development are both sales and sourcing processes that were determined by the commissioning company. All of these processes have in common that there are used sales orders to organize the money flows correctly. Although the main objective is to source only recovered paper, the sourcing also brings by-products that cannot be utilized and are thus sold. As the purpose of the sales function is to only support the sourcing strategy, it should be organized as efficiently as possible. Investigating the current status of the processes and finding development points help in building proposals for enhanced process descriptions. In order that sales function could be analyzed, should the sales reporting be accurate and present the needed key figures. The current status of the processes as well as the possible problems and development ideas were researched with the help of interviews. Best practices could also be brought from other business lines in the commissioning company. The theory part was build according to relevant literature and scientific articles. The research indicates, that processes have shaped differently in sourcing organization’s business units. Local infrastructure and legislation sets certain limitations to the sourcing of recovered paper, and these circumstances cannot be changed. Customer-supplier power relations also affect to the formulation of business processes. In order to steer the processes, there has to be more internal controls. Still, the enterprise resource planning system also sets boundaries how the processes can be made more efficient.
Resumo:
Home Automation holds the potential of realizing cost savings for end users while reducing the carbon footprint of domestic energy consumption. Yet, adoption is still very low. High cost of vendor-supplied home automation systems is a major prohibiting factor. Open source systems such as FHEM, Domoticz, OpenHAB etc. are a cheaper alternative and can drive the adoption of home automation. Moreover, they have the advantage of not being limited to a single vendor or communication technology which gives end users flexibility in the choice of devices to include in their installation. However, interaction with devices having diverse communication technologies can be inconvenient for users thus limiting the utility they derive from it. For application developers, creating applications which interact with the several technologies in the home automation systems is not a consistent process. Hence, there is the need for a common description mechanism that makes interaction smooth for end users and which enables application developers to make home automation applications in a consistent and uniform way. This thesis proposes such a description mechanism within the context of an open source home automation system – FHEM, together with a system concept for its application. A mobile application was developed as a proof of concept of the proposed description mechanism and the results of the implementation are reflected upon.
Resumo:
During the lifetime of a research project, different partners develop several research prototype tools that share many common aspects. This is equally true for researchers as individuals and as groups: during a period of time they often develop several related tools to pursue a specific research line. Making research prototype tools easily accessible to the community is of utmost importance to promote the corresponding research, get feedback, and increase the tools’ lifetime beyond the duration of a specific project. One way to achieve this is to build graphical user interfaces (GUIs) that facilitate trying tools; in particular, with web-interfaces one avoids the overhead of downloading and installing the tools. Building GUIs from scratch is a tedious task, in particular for web-interfaces, and thus it typically gets low priority when developing a research prototype. Often we opt for copying the GUI of one tool and modifying it to fit the needs of a new related tool. Apart from code duplication, these tools will “live” separately, even though we might benefit from having them all in a common environment since they are related. This work aims at simplifying the process of building GUIs for research prototypes tools. In particular, we present EasyInterface, a toolkit that is based on novel methodology that provides an easy way to make research prototype tools available via common different environments such as a web-interface, within Eclipse, etc. It includes a novel text-based output language that allows to present results graphically without requiring any knowledge in GUI/Web programming. For example, an output of a tool could be (a structured version of) “highlight line number 10 of file ex.c” and “when the user clicks on line 10, open a dialog box with the text ...”. The environment will interpret this output and converts it to corresponding visual e_ects. The advantage of using this approach is that it will be interpreted equally by all environments of EasyInterface, e.g., the web-interface, the Eclipse plugin, etc. EasyInterface has been developed in the context of the Envisage [5] project, and has been evaluated on tools developed in this project, which include static analyzers, test-case generators, compilers, simulators, etc. EasyInterface is open source and available at GitHub2.
Resumo:
A new procedure was developed in this study, based on a system equipped with a cellulose membrane and a tetraethylenepentamine hexaacetate chelator (MD-TEPHA) for in situ characterization of the lability of metal species in aquatic systems. To this end, the DM-TEPHA system was prepared by adding TEPHA chelator to cellulose bags pre-purified with 1.0 mol L-1 of HCl and NaOH solutions. After the MD-TEPHA system was sealed, it was examined in the laboratory to evaluate the influence of complexation time (0-24 h), pH (3.0, 4.0, 5.0, 6.0 and 7.0), metal ions (Cu, Cd, Fe, Mn and Ni) and concentration of organic matter (15, 30 and 60 mg L-1) on the relative lability of metal species by TEPHA chelator. The results showed that Fe and Cu metals were complexed more slowly by TEPHA chelator in the MD-TEPHA system than were Cd, Ni and Mn in all pH used. It was also found that the pH strongly influences the process of metal complexation by the MD-TEPHA system. At all the pH levels, Cd, Mn and Ni showed greater complexation with TEPHA chelator (recovery of about 95-75%) than did Cu and Fe metals. Time also affects the lability of metal species complexed by aquatic humic substances (AHS); while Cd, Ni and Mn showed a faster kinetics, reaching equilibrium after about 100 min, and Cu and Fe approached equilibrium after 400 min. Increasing the AHS concentration decreases the lability of metal species by shifting the equilibrium to AHS-metal complexes. Our results indicate that the system under study offers an interesting alternative that can be applied to in situ experiments for differentiation of labile and inert metal species in aquatic systems. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
A solid state lithium metal battery based on a lithium garnet material was developed, constructed and tested. Specifically, a porous-dense-porous trilayer structure was fabricated by tape casting, a roll-to-roll technique conducive to high volume manufacturing. The high density and thin center layer (< 20 μm) effectively blocks dendrites even over hundreds of cycles. The microstructured porous layers, serving as electrode supports, are demonstrated to increase the interfacial surface area available to the electrodes and increase cathode loading. Reproducibility of flat, well sintered ceramics was achieved with consistent powderbed lattice parameter and ball milling of powderbed. Together, the resistance of the LLCZN trilayer was measured at an average of 7.6 ohm-cm2 in a symmetric lithium cell, significantly lower than any other reported literature results. Building on these results, a full cell with a lithium metal anode, LLCZN trilayer electrolyte, and LiCoO2 cathode was cycled 100 cycles without decay and an average ASR of 117 ohm-cm2. After cycling, the cell was held at open circuit for 24 hours without any voltage fade, demonstrating the absence of a dendrite or short-circuit of any type. Cost calculations guided the optimization of a trilayer structure predicted that resulting cells will be highly competitive in the marketplace as intrinsically safe lithium batteries with energy densities greater than 300 Wh/kg and 1000 Wh/L for under $100/kWh. Also in the pursuit of solid state batteries, an improved Na+ superionic conductor (NASICON) composition, Na3Zr2Si2PO12, was developed with a conductivity of 1.9x10-3 S/cm. New super-lithiated lithium garnet compositions, Li7.06La3Zr1.94Y0.06O12 and Li7.16La3Zr1.84Y0.16O12, were developed and studied revealing insights about the mechanisms of conductivity in lithium garnets.