O eterno retorno como paródia e como colagem na filosofia da diferença de Gilles Deleuze

Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.

O eterno retorno como paródia e como colagem na filosofia da diferença de Gilles Deleuze

Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Estudo da eficiência dos adsorventes de Al2O3 e Fe/Al2O3 para remoção de BTX presente em água contaminada com gasolina

Contamination of groundwater by BTX has been featured in recent decades. This type of contamination is due to small and continuous leaks at gas stations, causing serious problems to public health and the environment. Based on these antecedents, the search for new alternatives for treating contaminated water is shown to be essential. Therefore, this study aimed to evaluate the efficiency of removal of BTX by adsorption processes employing commercial alumina (Al2O3) and alumina supported with iron (Fe/Al2O3) as adsorbents. It was prepared by a in a synthetic gasoline solution and distilled water to simulate an actual sample. Initially, the adsorbents were characterized by techniques XRD, TG / DTG, XRF, FTIR and SEM/EDS, several trials, where he was placed synthetic solution to react in the presence of Al2O3 and Fe/Al2O3 in a closed, mechanical stirring system were performed varying the catalyst concentration 2, 4 and 6 g.L-1 every 0, 10, 30 60, 90 and 120 min, aliquots were taken and brought to analysis by gas chromatography flame ionization with headspace extraction. The results indicated that the absorbent which has higher BTX removal capacity was the Fe/Al2O3 at a concentration of 6 g.L-1, pH = 4 and time of 90 minutes reaction, resulting in an efficiency, resulting in a 86,5% efficiency for benzene removal, for the 95,4% toluene, 90,8% for ɱ,ρ- xylene and 93.7% for the θ-xylenes. Subsequently, we performed a kinetic study of the reactions, the values of experimental adsorption capacity (qe) showed agreement with the values of the theoretical adsorption capacity (qc) to the pseudo-second-order model in the adsorption tests using 2 and 6 gL-1 of Al2O3 and assays using 2, 4 and 6 g.L-1 of Fe/Al2O3. A fact corroborated by the R2 values, thus indicating that the chemical interactions are present in the adsorption mechanisms of BTX.

O ator na rua: uma expressividade caótica

Ce travail a recherché sur le processus de préparation corporel\vocal\énergique de l’acteur pour la rue. Notre quête principale c’est comprendre les processus qui l'acteur se déplace afin de développer une énergie à la scène dans la rue. C'est cette énergie qui est mis en place et se rapporte à le passant\spectateur? Qui attire l'attention de passant\spectateur? Serai l'histoire? Le code vestimentaire ou être une expressivité dynamisée? Serai une énergie présente dans le corps de l'acteur qui se relacione avec les passants? Comme l'acteur se rapporte à l'espace urbain? Pour tenter de répondre à ces questions, nous allons utilisé certains principes de la physique moderne, tels comme: la Théorie Quantique et le Principe d'Incertitude, autan la Théorie du Chaos. Le théâtre jouée dans les rues, surtout par le biais de longs prolongements de construction scénique, cependant, lorsque présentée au public, est prise par les autres causalités, car étant situé sur la rue, l'acteur devient assujettie à cet espace et ne peut pas nier la possibilité des faits qui peuvent se produire. Selon la physique quantique l'énergie se propage dans un espace vide, la quantité d'énergie physique étant échangé dans la rue, ce qui entraîne le moment magique où les corps des acteurs, des échanges constants avec les spectateurs, en permettant le saut quantique: le spectacle théâtral de la rue.

A política do argumento de inclusão regional no âmbito da Universidade Federal do Rio Grande do Norte

O acesso ao ensino superior gratuito no Brasil continua sendo um grande desafio para significativa parcela da população. Várias políticas de ações afirmativas têm sido estimuladas no sentido de promover um acesso mais homogêneo às universidades públicas brasileiras. Essa dificuldade no acesso acaba refletindo-se no mercado de trabalho, gerando um desequilíbrio em várias áreas de atuação. Na área de saúde, temos observado que um intenso debate sobre a oferta, a concentração e a fixação de médicos vem acontecendo no Brasil. Embora o número de médicos tenha aumentado nos últimos anos, chama a atenção a desigualdade da distribuição dos mesmos, que prioriza os grandes centros urbanos e as capitais em detrimento dos municípios do interior. A abertura de novos cursos de medicina é uma das estratégias na tentativa de conseguir uma melhor distribuição de médicos nas diversas regiões do Brasil. O presente trabalho teve como objetivo estudar o Argumento de Inclusão Regional da Universidade Federal do Rio Grande do Norte, enquanto política que objetiva priorizar a seleção de estudantes do interior do Estado com vistas a promover maior fixação futura de profissionais nas regiões com maior carência destes, especialmente médicos. Trata-se de estudo exploratório, descritivo, em que a coleta de dados constou de revisão bibliográfica e análise documental. O estudo se desenvolveu em etapas, transformadas em capítulos descritivos que deram forma ao trabalho final. É importante destacar a necessidade de esclarecimento sobre esse instrumento, que pode ser utilizado por todos os novos cursos de Medicina do país como um dos meios para um melhorar o acesso de estudantes das regiões onde os cursos estão inseridos e, com isso, tentar promover, ao final do curso, uma maior fixação de médicos nos municípios do interior do Brasil.

Métodos de extração de fósforo e micronutrientes em latossolos com uso de energia ultrassônica

Assessing the soil nutrient availability to plants under lab conditions is one of the main challenges to Soil Fertility and Chemistry, due to the complex behavior and the interaction of the soil properties. Many extractant solutions associated with mechanical forms of agitation have been proposed, showing different correlations with plant growth and nutrients absorption. Using ultrasonic energy is a agitation procedure of the soil:extractant solution suspension (based on the cavitation phenomenon). It allows the establishment of relations between the amount of extracted nutrient and the ultrasonic energy level. Thus, this work aims: to evaluate the effect of cavitation intensity on the extraction of P, Zn, Cu, Mn and Fe in soil samples from five Latosols under different uses around Uberlândia and Uberaba, Minas Gerais State; to obtain extracting curves as function of ultrasonic energy levels; and to obtain an index from extracting curves to expresses the nutrient retention by the soil solid phase. A soil-solution suspension (ratio 1:10) was sonicated using a probe ultrasound equipment under different combinations of power and time: i) 30 W for 35, 70, 140 and 280 s; ii) 50 W for 21, 42, 84 and 168 s; and iii) 70 W for 15, 30, 60 and 120 s. The extractant solutions used were Mehlich-1 (for all elements), Olsen and distilled water for P. After each sonication, P concentration was quantified by molybdenum blue colorimetric method and Zn, Cu, Mn and Fe by flame atomic absorption spectrophotometry. The cavitation intensity did not affect the P extraction, only the total energy applied. The P extraction was influenced by extractant solution, decreasing as follows: Mehlich-1>Olsen>water. In cultivated Latosols, the P extraction increased linearly with ultrasonic energy, and the slope of the 1:1 linear regression reflects the P retention in the soil. The Zn and Fe extractions were influenced only by total energy applied. Mn and Cu extractions were influenced by both cavitation intensity and total ultrasonic energy. Soils containing similar amounts of P, Cu, Zn, Mn, and Fe may have a different extraction rate. Likewise, soils containing different amounts of those elements may have the same extraction rate.

Reengenharia de processos de negócio: o caso dos processos de coordenação dos cursos de licenciatura e mestrado da Escola Superior da Tecnologia e Gestão do Instituto Politécnico de Leiria

O mercado atual das instituições do ensino superior (IES) é caraterizado pela forte concorrência, o que chama a estas instituições uma necessidade de serem cada vez mais eficazes, oferecendo melhores serviços sem ter que desperdiçar os recursos cada vez mais escassos. A reengenharia de processos de negócios (BPR) oferece às instituições do ensino superior a possibilidade de repensarem os seus processos, eliminando as ineficiências dos serviços prestados à sua comunidade académica e serem cada vez mais competitivas ao nível de qualidade e preço. Este estudo tem como objetivo caraterizar os processos, a sua importância, o tempo despendido na realização destes processos e saber as possibilidades de automatização dos processos ou se o processo pode ser realizado por um colaborador administrativo com vista à reengenharia. Concentramos o nosso estudo na coordenação dos cursos da Escola Superior da Tecnologia e Gestão (ESTG) porque a coordenação dos cursos são a espinha dorsal da ESTG Leiria. Foi realizado uma revisão da literatura sobre o conceito de Processos, a sua importância e as diferentes formas de os descrever e ainda abordámos o conceito da reengenharia de processos, os desafios a que se propõe e a reengenharia de processos nas instituições do ensino superior. Foram realizados dois inquéritos aos 29 coordenadores dos cursos da ESTG Leiria, entre os quais 16 licenciaturas e 13 mestrados, onde se obteve, no primeiro, 15 respostas válidas e no segundo 14 respostas válidas. A metodologia utilizada é o estudo de caso; podemos ver que esta metodologia traz resultados, permitindo constatar, neste estudo, que é possível reduzir o número de horas despendidas para a realização dos processos de coordenação dos cursos, que alguns processos podem ser automatizados e também que existem processos de coordenação dos cursos que podem ser realizados pelos colaboradores administrativos

Reflexiones sobre sociología, historia y tiempo : Entrevista a Ramón Ramos Torre

Fil: Chama, Mauricio. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación. Instituto de Investigaciones en Humanidades y Ciencias Sociales (UNLP-CONICET); Argentina.

Potential of incorporating ocean currents in fishing vessels

The fishing sector has been suffering a strong setback, with reduction in fishing stocks and more recently with the reduction of the fishing fleet. One of the most important factors for this decrease, is related to the continuous difficulty to find fish with quality and quantity, allowing the sector work constantly all year long. However other factors are affecting negatively the fishing sector, in particular the huge maintenance costs of the ships and the high diary costs that are necessary for daily work of each vessel. One of the main costs associated with daily work, is the fuel consumption. As an example, one boat with 30 meters working around 17 hours every day, consumes 2500 liters of fuel/day. This value is very high taking into account the productivity of the sector. Supporting this premise was developed a project with the aim of reducing fuel consumption in fishing vessels. The project calls “ShipTrack” and aims the use of forecasts of ocean currents in the routes of the ships. The objective involves the use of ocean currents in favor, and avoiding ocean currents against, taking into account the course of the ship, in order to reduce fuel consumption and increase the ship speed. The methodology used underwent the creation of specific Software, in order to optimize routes, taking into account the forecasts of the ocean currents. These forecasts are performed using numerical modelling, methodology that become more and more important in all communities, because through the modeling, it can be analyzed, verified and predicted important phenomena to all the terrestrial ecosystem. The objective was the creation of Software, however its development was not completed, so it was necessary a new approach in order to verify the influence of the ocean currents in the navigation of the fishing ship "Cruz de Malta". In this new approach, and during the various ship routes it was gathering a constant information about the instant speed, instantaneous fuel consumption, the state of the ocean currents along the course of the ship, among other factors. After 4 sea travels and many routes analyzed, it was possible to verify the influence of the ocean currents in the Ship speed and in fuel consumption. For example, in many stages of the sea travels it was possible to verify an increase in speed in zones where the ocean currents are in favor to the ships movements. This incorporation of new data inside the fishing industry, was seen positively by his players, which encourages new developments in this industry.

Impact of node mobility in user-centric routing

Recent paradigms in wireless communication architectures describe environments where nodes present a highly dynamic behavior (e.g., User Centric Networks). In such environments, routing is still performed based on the regular packet-switched behavior of store-and-forward. Albeit sufficient to compute at least an adequate path between a source and a destination, such routing behavior cannot adequately sustain the highly nomadic lifestyle that Internet users are today experiencing. This thesis aims to analyse the impact of the nodes’ mobility on routing scenarios. It also aims at the development of forwarding concepts that help in message forwarding across graphs where nodes exhibit human mobility patterns, as is the case of most of the user-centric wireless networks today. The first part of the work involved the analysis of the mobility impact on routing, and we found that node mobility significance can affect routing performance, and it depends on the link length, distance, and mobility patterns of nodes. The study of current mobility parameters showed that they capture mobility partially. The routing protocol robustness to node mobility depends on the routing metric sensitivity to node mobility. As such, mobility-aware routing metrics were devised to increase routing robustness to node mobility. Two categories of routing metrics proposed are the time-based and spatial correlation-based. For the validation of the metrics, several mobility models were used, which include the ones that mimic human mobility patterns. The metrics were implemented using the Network Simulator tool using two widely used multi-hop routing protocols of Optimized Link State Routing (OLSR) and Ad hoc On Demand Distance Vector (AODV). Using the proposed metrics, we reduced the path re-computation frequency compared to the benchmark metric. This means that more stable nodes were used to route data. The time-based routing metrics generally performed well across the different node mobility scenarios used. We also noted a variation on the performance of the metrics, including the benchmark metric, under different mobility models, due to the differences in the node mobility governing rules of the models.

O falar paranaense

This book didactically addresses relevant issues for researchers in the linguistic field as well as professors, journalists and whoever else is interested in understating the so called “paranaense dialect”. It is relevant to clarify, however, that there is not one single dialect from Parana as the state has three distinctive dialectal areas. That means the traditional speech from the state corresponds to its historical settlement. The first area dates back to the XVIII century in the center-south-coast direction; the second area dates from the 1920´s and 1930´s matching the arrival of immigrants from Rio Grande do Sul and Santa Catarina in the search for new territories, clearing forestry regions from the Southwest and Western regions in Parana, turning them into harvesting areas. The third linguistic area corresponds to the North and Northwest of Parana, which were colonized in the 1940´s and 1950´s by immigrants from Minas Gerais and São Paulo who came to grow coffee plants in its rich red land. Such dialectal diversity constitutes only a small fraction of what is understood as the Brazilian Portuguese. So, having it described means to collaborate to map the great linguistic mosaic that characterizes the whole Brazilian territory. We then seek to offer readers a small sample of the analyses carried out by researchers concerning the different performances of the Portuguese spoken in Parana (Banco VARSUL, ALERS, Atlas Linguístico do Paraná, Banco VARLINFE). We expect these findings encourage new approaches and Linguistic studies from other regions of the state.

Indicações para o projeto arquitetônico de edifícios multifamiliares: uma análise pósocupação em Natal/RN

Confirming the Brazilian tendency in the field, the multifamily vertical condominium habitats in Natal are defined as buildings with three or more floors which have been an increasingly used solution. In the mentioned project, the connection between the projectarchitects and the user/ buyers are spread out, by which the first people conceive the realestate property as a creation for the market and not the individual client in specific. Such situation along with technical and financial limitations of the project lead to the adoption of standard solutions to be utilized by clients with different profiles. Besides that, there are various legal and urban parameters by the City Director Plan showing elements of great influence in the final solution adopted by the mentioned edifices. Moving to this subject in general, this project is focused on the case study of the Ed. Ville de Montpellier, having as a base of Post Occupancy Evaluation (POE), considered an efficient tool to analyze and keep up with the progress of the construction of the building, including technical approvals, the application of surveys with the local residents and the creation of informal interviews. The data shows that with time some items that initially motivated the acquisition of the realestate property (with a social common area) move to being less valued, and that the residents quickly alter the pre constructed space, thus seeking to alter the property in a more personal and conforming manner. The possibility of a new emphasis for projects on the mentioned space should also be in discussion, the created project calls for the attention of projected conceptual aspects and interdependence within project and construction which permits the indication of some recommendations for the projection of multifamily residential buildings within the studied realm

Avaliação do potencial da macrófita Pistia stratiotes na exposição de íon cromo (VI): biossorção e tolerância

The environmental pollution caused by industries has increased the concentration of pollutants in the environment, especially in water. Among the most diverse contaminants, there is the metals, who may or may not to be heavy/toxic, causing effluent of difficult treatment when in low concentrations. The search for alternative measures of wastewater effluent treatment has led to studies using phytoremediation technique through the various matrices (plant, fungi, bacteria) as means of polishing treatment to remove contaminants by means of biosorption/bioaccumulation. In order to use the phytoremediation technique for removing metals of the environmental, it have been performed bioassay with the macrophyte Pistia stratiotes. The bioassays were realized with healthy plants of P. stratiotes acclimatized in a greenhouse, at room temperature and lighting conditions during 28 days of cultivate. The cultivations were performed in glass vessels containing 1 L of the hydroponic solution with chromium (VI) in the potassium dichromate form with concentration range 0.10 to 4.90 mg L-1. The experiments were performed by Outlining Central Composite Rotational (OCCR), where the kinetics of bioaccumulation and chlorophyll a fluorescence were monitored in plants of P. stratiotes during cultivation. The collections of the samples and cultive solution were performed according to the OCCR. The chromium levels were measured in samples of P. stratiotes and the remaining solutions by the methodology of atomic absorption spectrometry by flame. The tolerance of P. stratiotes in relation to exposure to chromium (VI) was analyzed by parameters of physiological activity by means of chlorophyll a fluorescence, using the portable fluorometer PAM (Pulse Amplitude Modulation). The development of P. stratiots and their biomass were related to the time factor, while bioaccumulation capacities were strongly influenced by factors of time and chromium concentration (VI). The chlorophyll fluorescence parameters were affected by chromium and the exposure time at the bioassays. It was obtained an higher metal removal from the root in relation to the sheet, reaching a high rate of metal removal in solution. The experimental data removal kinetics were represented by kinetic models Irreversibly Langmuir, Reversible Langmuir, Pseudo-first Order and Pseudo-second Order, and the best fit for the culture solution was the Reversible Langmuir model with R² 0.993 and for the plant the best model was Pseudo-second order with R² 0.760.