Bide metabolikoen ebaluaketarako protokolo kliniko exekutagarria

Proiektu pilotu honekin medikuntzarako tresna lagungarri bat sortu da Jaiotzetiko Sortzen Diren Errore Metabolikoak (JASODEM) diagnostikatzeko. Horretarako, Gurutzeta Ospitaleko Metabolismo Laborategiko adituarekin eta UPV/EHUko Informatika Fakultateko ERABAKI taldearen arteko elkar-lana funtsezkoa izan da. Amaierako produktua Web zerbitzari batean egongo da exekutagarri. Web aplikazioaren bitartez, medikuak gaixo ezberdinei diagnostikoak egiteko aukera izango du. Horretarako aski da Praktika Klinikorako Gidaren exekuzio bat abiaraztea eta bertan pazienteari inguruan eskatzen diren datuak sartzea. Exekuzio prozesuan zehar badago sistematik irten eta ondoren lanarekin berriz jarraitzea, modu honetan froga klinikoak beharren arabera egiten direlarik, diagnostiko prozesuko kostua murriztuz. Bestalde, Praktika Klinikorako Gidan agertzen diren kontzeptuen inguruko informazioa jasotzeko funtzionalitatea eskaintzen zaio erabiltzaileari. Proiektua garatzeko aukeratu den metodologiaren jarraipen zehatza egitea eta kalitatezko dokumentazioa sortzea ezinbestekoa da. Proiektu honen garapenerako, Rational Unified Process (RUP) metodologia eta honi euskarria ematen dioten tresneria erabili da. Proiektuaren analisirako eta Jakintza Ingeniaritzarako CommonKADS metodologia erabili da.

The Derivation of Dative Alternations

Maia Duguine, Susana Huidobro and Nerea Madariaga (eds.)

Chemical equilibrium analysis and CFD simulation of coal combustion and NOx formation

A full two-fluid model of reacting gas-particle flows with an algebraic unified second-order moment (AUSM) turbulence-chemistry model is used to simulate Beijing coal combustion and NOx formation. The sub-models are the k-epsilon-kp two-phase turbulence model, the EBU-Arrhenius volatile and CO combustion model, the six-flux radiation model, coal devolatilization model and char combustion model. The blocking effect on NOx formation is discussed. In addition, the chemical equilibrium analysis is used to predict NOx concentration at different temperature. Results of CID simulation and chemical equilibrium analysis show that, optimizing air dynamic parameters can delay the NOx formation and decrease NOx emission, but it is effective only in a restricted range. In order to decrease NOx emission near to zero, the re-burning or other chemical methods must be used.

La modernización urbana de Mondragón hacia 1900: la contribución de Pedro de Viteri

[ES] Pedro de Viteri (Mondragón, 1833-Biarritz, 1908) llegó a su villa natal en 1893, después de haber vivido en Francia desde que era un niño. Volvió con el ánimo de emprender una labor filantrópica que cambió la fisonomía urbana de Mondragón, imprimiendo un aire nuevo y moderno a una villa que a la sazón distaba mucho del ambiente en el que él se había movido.

Mechanisms underlying two kinds of surface effects on elastic constants

ABSTRACT Recently, people are confused with two opposite variations of elastic modulus with decreasing size of nano scale sample: elastic modulus either decreases or increases with decreas- ing sample size. In this paper, based on intermolecular potentials and a one dimensional model, we provide a unified understanding of the two opposite size effects. Firstly, we analyzed the mi- crostructural variation near the surface of an fcc nanofilm based on the Lennard-Jones potential. It is found that the atomic lattice near the surface becomes looser in comparison with the bulk, indicating that atoms in the bulk are located at the balance of repulsive forces, resulting in the decrease of the elastic moduli with the decreasing thickness of the film accordingly. In addition, the decrease in moduli should be attributed to both the looser surface layer and smaller coor- dination number of surface atoms. Furthermore, it is found that both looser and tighter lattice near the surface can appear for a general pair potential and the governing mechanism should be attributed to the surplus of the nearest force to all other long range interactions in the pair po- tential. Surprisingly, the surplus can be simply expressed by a sum of the long range interactions and the sum being positive or negative determines the looser or tighter lattice near surface re- spectively. To justify this concept, we examined ZnO in terms of Buckingham potential with long range Coulomb interactions. It is found that compared to its bulk lattice, the ZnO lattice near the surface becomes tighter, indicating the atoms in the bulk located at the balance of attractive forces, owing to the long range Coulomb interaction. Correspondingly, the elastic modulus of one- dimensional ZnO chain increases with decreasing size. Finally, a kind of many-body potential for Cu was examined. In this case, the surface layer becomes tighter than the bulk and the modulus increases with deceasing size, owing to the long range repulsive pair interaction, as well as the cohesive many-body interaction caused by the electron redistribution.

Stabilizing to disruptive transition of focal adhesion response to mechanical forces

Strong mechanical forces can, obviously, disrupt cell-cell and cell-matrix adhesions, e.g., cyclic uniaxial stretch induces instability of cell adhesion, which then causes the reorientation of cells away from the stretching direction. However, recent experiments also demonstrated the existence of force dependent adhesion growth (rather than dissociation). To provide a quantitative explanation for the two seemingly contradictory phenomena, a microscopic model that includes both integrin-integrin interaction and integrin-ligand interaction is developed at molecular level by treating the focal adhesion as an adhesion cluster. The integrin clustering dynamics and integrin-ligand binding dynamics are then simulated within one unified theoretical frame with Monte Carlo simulation. We find that the focal adhesion will grow when the traction force is higher than a relative small threshold value, and the growth is dominated by the reduction of local chemical potential energy by the traction force. In contrast, the focal adhesion will rupture when the traction force exceeds a second threshold value, and the rupture is dominated by the breaking of integrin-ligand bonds. Consistent with the experiments, these results suggest a force map for various responses of cell adhesion to different scales of mechanical force. PMID: 20542514

High Order Multi-Moment Constrained Finite Volume Method. Part I: Basic Formulation

A new high-order finite volume method based on local reconstruction is presented in this paper. The method, so-called the multi-moment constrained finite volume (MCV) method, uses the point values defined within single cell at equally spaced points as the model variables (or unknowns). The time evolution equations used to update the unknowns are derived from a set of constraint conditions imposed on multi kinds of moments, i.e. the cell-averaged value and the point-wise value of the state variable and its derivatives. The finite volume constraint on the cell-average guarantees the numerical conservativeness of the method. Most constraint conditions are imposed on the cell boundaries, where the numerical flux and its derivatives are solved as general Riemann problems. A multi-moment constrained Lagrange interpolation reconstruction for the demanded order of accuracy is constructed over single cell and converts the evolution equations of the moments to those of the unknowns. The presented method provides a general framework to construct efficient schemes of high orders. The basic formulations for hyperbolic conservation laws in 1- and 2D structured grids are detailed with the numerical results of widely used benchmark tests. (C) 2009 Elsevier Inc. All rights reserved.

On the settling speed of dilute arrays of spheres

A method is developed to calculate the settling speed of dilute arrays of spheres for the three cases of: I, a random array of freely moving particles; II, a random array of rigidly held particles; and III, a cubic array of particles. The basic idea of the technique is to give a formal representation for the solution and then manipulate this representation in a straightforward manner to obtain the result. For infinite arrays of spheres, our results agree with the results previously found by other authors, and the analysis here appears to be simpler. This method is able to obtain more terms in the answer than was possible by Saffman's unified treatment for point particles. Some results for arbitrary two sphere distributions are presented, and an analysis of the wall effect for particles settling in a tube is given. It is expected that the method presented here can be generalized to solve other types of problems.

Adaptation of coastal communities in the Philippines to the impacts climate change

The Quedan and Rural Credit Guarantee Corporation (Quedancor) of the Philippine Department of Agriculture has the critical responsibility of providing and improving credit assistance to fishers, it also has the task of helping its beneficiaries meet the repayment obligations of their loans. One reason for defaults can be attributed to the devastating impact of natural calamities. Schemes in place are still insufficient to help safeguard lending programs and operations from non-repayment of loans due to production losses and damages to personal properties.(PDF contains 5 pages) Natural calamities include the uncertainties and vagaries of weather and climate that bring about typhoons, floods, and drought; earthquakes; volcanic eruption as well as pests and diseases that affect the productivity of fisheries. When natural calamities occur, small fishers are unable to pay their loans from Quedancor, moreover they have difficulty renewing their loan applications from Quedancor or accessing credit from other sources. Failure to access credit could disable them to continue venture on fishing activities and could eventually jeopardize the welfare of their entire household. The inability of creditors to pay their loans and meet their obligations also impair, to a large extent, the financial operation and viability of the lending institutions. Risk management schemes currently employed include price stabilization measures, targeted relief` to typhoons and drought victims, and crop insurance systems, to name a few. Some of these schemes are becoming very expensive to implement. Moreover, they fail to enable fishers regain sufficient resources so that they may continue production.

Impact of Nigerian Agricultural Cooperative and Rural Development Bank (NACRDB) loan to artisanal fishermen in Lake Kainji

This study was conducted to assess the impact of Nigerian Agricultural, Co-operative and Rural Development Bank Loan on beneficiaries and non-beneficiaries fishermen in Lake Kainji. A total of fifty fishermen (25 beneficiaries and 25 non-beneficiaries) were randomly selected from five fishing villages along the lake basin. Data collected were scored and the percentages of the parameters were calculated appropriately. The types of loans disbursed to beneficiaries revealed that 52% was cash and 48% was in kind. The credit package ranged between N5, 000 to N150, 000 only. Only 48% of the loans granted were paid while the rest remained unpaid. The results obtained from the membership of fishermen Cooperative showed that 64% of beneficiaries were members while 36% were non-members. Also 36% of non-beneficiaries were members while 64% were not. The Common fishing gears used by the two categories of fishermen include gillnets longline, castnet and driftnets. Sixty percent of beneficiaries and 8% of non-beneficiaries fishermen were using canoe with outboard engines while the rest used canoes with paddles. Beneficiaries earned a higher income (N1, 000 to N9, 000) daily than non-beneficiaries (N1, 000 to N6, 000) daily from sales of fish caught. Major contrainsts to increased catch and income identified include inadequate capital, non- availability of fishing inputs, stealing of fishing gears, lack of access to credit facilities and menace of stump and water hyacinth in the lake. Lastly, recommendation were made for the bank management, government and other lending institutions on how to improve the livelihood of the Artisanal fishermen by increasing the loan usually granted

Transceiver designs and analysis for LTI, LTV and broadcast channels - new matrix decompositions and majorization theory

Signal processing techniques play important roles in the design of digital communication systems. These include information manipulation, transmitter signal processing, channel estimation, channel equalization and receiver signal processing. By interacting with communication theory and system implementing technologies, signal processing specialists develop efficient schemes for various communication problems by wisely exploiting various mathematical tools such as analysis, probability theory, matrix theory, optimization theory, and many others. In recent years, researchers realized that multiple-input multiple-output (MIMO) channel models are applicable to a wide range of different physical communications channels. Using the elegant matrix-vector notations, many MIMO transceiver (including the precoder and equalizer) design problems can be solved by matrix and optimization theory. Furthermore, the researchers showed that the majorization theory and matrix decompositions, such as singular value decomposition (SVD), geometric mean decomposition (GMD) and generalized triangular decomposition (GTD), provide unified frameworks for solving many of the point-to-point MIMO transceiver design problems.

In this thesis, we consider the transceiver design problems for linear time invariant (LTI) flat MIMO channels, linear time-varying narrowband MIMO channels, flat MIMO broadcast channels, and doubly selective scalar channels. Additionally, the channel estimation problem is also considered. The main contributions of this dissertation are the development of new matrix decompositions, and the uses of the matrix decompositions and majorization theory toward the practical transmit-receive scheme designs for transceiver optimization problems. Elegant solutions are obtained, novel transceiver structures are developed, ingenious algorithms are proposed, and performance analyses are derived.

The first part of the thesis focuses on transceiver design with LTI flat MIMO channels. We propose a novel matrix decomposition which decomposes a complex matrix as a product of several sets of semi-unitary matrices and upper triangular matrices in an iterative manner. The complexity of the new decomposition, generalized geometric mean decomposition (GGMD), is always less than or equal to that of geometric mean decomposition (GMD). The optimal GGMD parameters which yield the minimal complexity are derived. Based on the channel state information (CSI) at both the transmitter (CSIT) and receiver (CSIR), GGMD is used to design a butterfly structured decision feedback equalizer (DFE) MIMO transceiver which achieves the minimum average mean square error (MSE) under the total transmit power constraint. A novel iterative receiving detection algorithm for the specific receiver is also proposed. For the application to cyclic prefix (CP) systems in which the SVD of the equivalent channel matrix can be easily computed, the proposed GGMD transceiver has K/log_2(K) times complexity advantage over the GMD transceiver, where K is the number of data symbols per data block and is a power of 2. The performance analysis shows that the GGMD DFE transceiver can convert a MIMO channel into a set of parallel subchannels with the same bias and signal to interference plus noise ratios (SINRs). Hence, the average bit rate error (BER) is automatically minimized without the need for bit allocation. Moreover, the proposed transceiver can achieve the channel capacity simply by applying independent scalar Gaussian codes of the same rate at subchannels.

In the second part of the thesis, we focus on MIMO transceiver design for slowly time-varying MIMO channels with zero-forcing or MMSE criterion. Even though the GGMD/GMD DFE transceivers work for slowly time-varying MIMO channels by exploiting the instantaneous CSI at both ends, their performance is by no means optimal since the temporal diversity of the time-varying channels is not exploited. Based on the GTD, we develop space-time GTD (ST-GTD) for the decomposition of linear time-varying flat MIMO channels. Under the assumption that CSIT, CSIR and channel prediction are available, by using the proposed ST-GTD, we develop space-time geometric mean decomposition (ST-GMD) DFE transceivers under the zero-forcing or MMSE criterion. Under perfect channel prediction, the new system minimizes both the average MSE at the detector in each space-time (ST) block (which consists of several coherence blocks), and the average per ST-block BER in the moderate high SNR region. Moreover, the ST-GMD DFE transceiver designed under an MMSE criterion maximizes Gaussian mutual information over the equivalent channel seen by each ST-block. In general, the newly proposed transceivers perform better than the GGMD-based systems since the super-imposed temporal precoder is able to exploit the temporal diversity of time-varying channels. For practical applications, a novel ST-GTD based system which does not require channel prediction but shares the same asymptotic BER performance with the ST-GMD DFE transceiver is also proposed.

The third part of the thesis considers two quality of service (QoS) transceiver design problems for flat MIMO broadcast channels. The first one is the power minimization problem (min-power) with a total bitrate constraint and per-stream BER constraints. The second problem is the rate maximization problem (max-rate) with a total transmit power constraint and per-stream BER constraints. Exploiting a particular class of joint triangularization (JT), we are able to jointly optimize the bit allocation and the broadcast DFE transceiver for the min-power and max-rate problems. The resulting optimal designs are called the minimum power JT broadcast DFE transceiver (MPJT) and maximum rate JT broadcast DFE transceiver (MRJT), respectively. In addition to the optimal designs, two suboptimal designs based on QR decomposition are proposed. They are realizable for arbitrary number of users.

Finally, we investigate the design of a discrete Fourier transform (DFT) modulated filterbank transceiver (DFT-FBT) with LTV scalar channels. For both cases with known LTV channels and unknown wide sense stationary uncorrelated scattering (WSSUS) statistical channels, we show how to optimize the transmitting and receiving prototypes of a DFT-FBT such that the SINR at the receiver is maximized. Also, a novel pilot-aided subspace channel estimation algorithm is proposed for the orthogonal frequency division multiplexing (OFDM) systems with quasi-stationary multi-path Rayleigh fading channels. Using the concept of a difference co-array, the new technique can construct M^2 co-pilots from M physical pilot tones with alternating pilot placement. Subspace methods, such as MUSIC and ESPRIT, can be used to estimate the multipath delays and the number of identifiable paths is up to O(M^2), theoretically. With the delay information, a MMSE estimator for frequency response is derived. It is shown through simulations that the proposed method outperforms the conventional subspace channel estimator when the number of multipaths is greater than or equal to the number of physical pilots minus one.

New strategies for the total synthesis of aza-propellane natural products

The propellane alkaloids comprise a large class of natural products that possess varying degrees of structural complexity and biological activity. The earliest of these to be isolated was acutumine, a chlorinated alkaloid that has been shown to exhibit selective T-cell cytotoxicity and antiamnesic properties. Alternatively, the hasubanan family of natural products has garnered considerable attention from the synthetic community in part due to its structural similarities to morphine. While these alkaloids have been the subject of numerous synthetic studies over the last forty years, very few enantioselective total syntheses have been reported to date.

As part of a research program directed towards the synthesis of various alkaloid natural products, we have developed a unified strategy for the preparation of the hasubanan and acutumine alkaloids. Specifically, a highly diastereoselective 1,2-addition of organometallic reagents to benzoquinone-derived tert-butanesulfinimines was established, which provides access to enantioenriched 4-aminocyclohexadienone products. This methodology enabled the enantioselective construction of functionalized dihydroindolones, which were found to undergo intramolecular Friedel-Crafts conjugate additions to furnish the propellane cores of several hasubanan alkaloids. As a result of these studies, the first enantioselective total syntheses of 8-demethoxyrunanine and cepharatines A, C, and D were accomplished in 9-11 steps from commercially available starting materials.

More recent efforts have focused on applying the sulfinimine methodology to the synthesis of a more structurally complex propellane alkaloid, acutumine. Extensive studies have determined that a properly functionalized dihydroindolone undergoes a photochemical [2+2] cycloaddition followed by a lactone fragmentation/Dieckmann cyclization to establish the carbocyclic framework of the natural product. The preparation of more appropriately oxidized propellane intermediates is currently under investigation, and is anticipated to facilitate our synthetic endeavors toward acutumine.

Self-focusing, Raman, and modulation instability of shaped relativistic laser pulse in plasmas

The interaction of shaped laser pulses with plasmas is studied in a strict theoretical framework without adopting the slow-varying envelope approximation (SVEA). Any physical quantities involved in the interaction are denoted as a summation of different real quantities of respective phases. The relationships among the phases of those real quantities and their moduli are strictly analyzed. Such strict analyses lead to a more exact equation set for the three-dimensional envelope of the laser pulse, which is not based on SVEA. Based on this equation set, self-focusing, Raman, and modulation instabilities could be discussed in a unified framework. The solutions of this equation set for the laser envelope reveal many possible multicolor laser modes in plasmas. The energy and the shape of a pulse determine its propagation through plasmas in a multicolor mode or in a monochromic mode. A global growth rate is introduced to measure the speed of the transition from the monochromic mode in vacuum to a possible mode in plasmas. (c) 2006 American Institute of Physics.

Understanding planet formation through high precision photometry and spectroscopy

From studies of protoplanetary disks to extrasolar planets and planetary debris, we aim to understand the full evolution of a planetary system. Observational constraints from ground- and space-based instrumentation allows us to measure the properties of objects near and far and are central to developing this understanding. We present here three observational campaigns that, when combined with theoretical models, reveal characteristics of different stages and remnants of planet formation. The Kuiper Belt provides evidence of chemical and dynamical activity that reveals clues to its primordial environment and subsequent evolution. Large samples of this population can only be assembled at optical wavelengths, with thermal measurements at infrared and sub-mm wavelengths currently available for only the largest and closest bodies. We measure the size and shape of one particular object precisely here, in hopes of better understanding its unique dynamical history and layered composition.

Molecular organic chemistry is one of the most fundamental and widespread facets of the universe, and plays a key role in planet formation. A host of carbon-containing molecules vibrationally emit in the near-infrared when excited by warm gas, T~1000 K. The NIRSPEC instrument at the W.M. Keck Observatory is uniquely configured to study large ranges of this wavelength region at high spectral resolution. Using this facility we present studies of warm CO gas in protoplanetary disks, with a new code for precise excitation modeling. A parameterized suite of models demonstrates the abilities of the code and matches observational constraints such as line strength and shape. We use the models to probe various disk parameters as well, which are easily extensible to others with known disk emission spectra such as water, carbon dioxide, acetylene, and hydrogen cyanide.

Lastly, the existence of molecules in extrasolar planets can also be studied with NIRSPEC and reveals a great deal about the evolution of the protoplanetary gas. The species we observe in protoplanetary disks are also often present in exoplanet atmospheres, and are abundant in Earth's atmosphere as well. Thus, a sophisticated telluric removal code is necessary to analyze these high dynamic range, high-resolution spectra. We present observations of a hot Jupiter, revealing water in its atmosphere and demonstrating a new technique for exoplanet mass determination and atmospheric characterization. We will also be applying this atmospheric removal code to the aforementioned disk observations, to improve our data analysis and probe less abundant species. Guiding models using observations is the only way to develop an accurate understanding of the timescales and processes involved. The futures of the modeling and of the observations are bright, and the end goal of realizing a unified model of planet formation will require both theory and data, from a diverse collection of sources.

A integralidade no ensino de enfermagem na saúde da mulher: concepções e práticas de docentes

Este estudo teve como objetivos analisar as concepções teóricas e práticas docentes de enfermagem no cuidado à saúde da mulher a partir da ideia de integralidade e discutir as estratégias utilizadas pelos docentes para inserir o conteúdo da integralidade no ensino de enfermagem na saúde da mulher. A política atual de atenção integral à saúde da mulher propõe a incorporação do princípio da integralidade como eixo norteador que articule o mundo do ensino ao mundo do trabalho e da realidade social. Neste contexto, muitos sentidos se combinam e se conflitam na formação da ideia de integralidade no cuidado à saúde da mulher. A metodologia envolveu a abordagem qualitativa realizada nas Instituições Públicas de Ensino Superior do Estado do Rio de Janeiro que oferecem o Curso de Graduação em Enfermagem. Utilizou-se como técnica de coleta de dados a entrevista com dezessete docentes de enfermagem da área de saúde da mulher de acordo com os critérios de inclusão selecionados pela pesquisa. Da análise do material produzido surgiram quatro categorias, a saber: Concepções de integralidade no cuidado à saúde da mulher; Integralidade do cuidado no ensino da saúde da mulher; Estratégias utilizadas para inserir a integralidade no ensino de enfermagem na saúde da mulher; Dificuldades para implantar a integralidade no cuidado à saúde da mulher. Identificou-se que foram muitos os avanços do Sistema Único de Saúde na última década. Contudo, no que diz respeito à sua consolidação como sistema público de saúde, ainda estamos diante de grandes desafios, entre os quais se destaca o relativo à incorporação efetiva dos princípios e valores do SUS nos processos de trabalho, bem como nos processos formativos para a enfermagem na área da saúde da mulher. Desta maneira, faz-se necessário construir novas formas de trabalhar melhor com a assistência, perceber como efetivas as políticas publicas na área da saúde da mulher, considerando as necessidades e demandas locorregionais no país. É evidente a dificuldade em seguir os princípios aqui defendidos, porém a integralidade no cuidado à saúde da mulher, só será possível quando houver compromisso ético com as ações e relações necessárias para sua efetivação.