The cellular structure of a two-dimensional H2/O2/Ar detonation wave

In this paper, the cellular structure of a two-dimensional detonation wave in a low pressure H2/O2/Ar mixture calculated with a detailed chemical reaction model, high order scheme and high resolution grids is investigated. The regular cellular structure is produced about 1 ms after introducing perturbations in the reaction zone of a steady one-dimensional detonation wave. It is found from the present resolution study that the discrepancies concerning the structure type arising from the coarser grid employed can be resolved using a sufficiently fine grid size of 0.05 mm and below and shows a double-Mach-like strong-type configuration. During the structure evolution process, the structure configuration does not change much in the periods before and after the triple point collision. Through the triple point collision, three regular collision processes are observed and are followed by a quick change to the double-Mach-like configuration. The simulated structure tracks show that there are three different tracks associated with different triple points or the kink on the transverse wave. Comparisons with previous work and experiments indicate the presence of a strong structure for an ordinary detonation.

The application of B-P constitutive equations in finite element analysis of high velocity impact

We present in this paper the application of B-P constitutive equations in finite element analysis of high velocity impact. The impact process carries out in so quick time that the heat-conducting can be neglected and meanwhile, the functions of temperature in equations need to be replaced by functions of plastic work. The material constants in the revised equations can be determined by comparison of the one-dimensional calculations with the experiments of Hopkinson bar. It can be seen from the comparison of the calculation with the experiment of a tungsten alloy projectile impacting a three-layer plate that the B-P constitutive equations in that the functions of temperature were replaced by the functions of plastic work can be used to analysis of high velocity impact.

La moral por acuerdo : sus fuentes modernas

Resumen: Más allá de las múltiples clasificaciones de las corrientes éticas contemporáneas, siempre esquemáticas y arbitrarias, la distinción básica entre todas ellas, y que subsiste como fundamento de toda ética, es el reconocimiento o el rechazo de valores y bienes absolutos, identificados con verdades absolutas, asentadas ontológicamente en la realidad del ser. El objetivo de este trabajo es pasar una rápida revista a las principales corrientes éticas contemporáneas, enfatizando el denominador común entre la mayoría de ellas, que es el consenso, analizando por último, sus fuentes en la temprana modernidad.

Polibio, el mundo helenístico y la problemática cultural : algunas líneas de reflexión en los últimos veinte años

Resumen: Nuestro conocimiento de algunos aspectos de las Historias de Polibio se ha incrementado significativamente durante las dos últimas décadas. En ese sentido, ha habido ciertos desarrollos importantes con respecto a aspectos culturales de la obra, cuyo alcance ha ido permitiendo repensar durante estos años algunos presupuestos clásicos sobre la relación entre Polibio, Roma y el mundo helenístico. Proponemos aquí ofrecer un rápido análisis de las tres principales líneas de estudio propuestas por los estudiosos, cuyo alcance es considerado, en efecto, como un total reubicación del historiador aqueo al interior del universo cultural del mundo helenístico.

Reforma tributária : competitividade, equidade e equilíbrio federativo

A publicação "é produto do ciclo de conferências, realizado pela Comissão de Finanças e Tributação (CFT) da Câmara dos Deputados, em maio de 2011, para debater temas componentes das agendas referentes ao aperfeiçoamento institucional do sistema tributário brasileiro, em especial aos aspectos relacionados à competitividade empresarial, à equidade social e ao equilíbrio federativo vertical e horizontal."

Aportaciones metodológicas a la gestión y explotación de nubes de puntos procedentes de escáneres tridimensionales, aplicados a la documentación geométrica del patrimonio. El caso de la Portada de los Hierros de la Catedral de Valencia

Presentado en: IX Congreso Internacional de Rehabilitación del Patrimonio Arquitectónico y Edificación (Sevilla, España, 9-12 julio 2008)

熔液法晶体生长流场的数值模拟(英文)

本文给出了对二种熔液法生长晶体的液相流场进行的计算机模拟的结果,对CZ法晶体生长的定常流场数值计算,采用了二阶迎风QUICK差分格式的有限控制体积法,通过对12种不同参数的流场情况所作的计算表明,二阶QUICK格式具有更高的计算精度和数值稳定性。对离心机环境下的水平Bridgman晶体生长的流场进行了三维非定常的数值模拟。结果表明,在一定的旋转方向和旋转速率条件下,离心机环境中的Coriolis力对熔体振荡流动有致稳作用。计算结果符合以往实验的发现,并优于二维非定常模拟结果。

ICSF guide book: understanding the Work in Fishing Convention, 2007

This guidebook attempts to provide a quick overview of the Work in Fishing Convention, 2007, which was adopted in Geneva, Switzerland, in June 2007 at the 96th International Labour Conference (ILC) of the International Labour Organization (ILO). It does not purport to provide interpretation of any provisions of the Convention and should not in any way be treated as a substitute for the actual provisions it contains. This guidebook is intended mainly to help those unfamiliar with the Convention and the working of the ILO and the ILC, gain some understanding of the relevant issues. In particular, it is hoped that the guidebook will aid fish workers and their organizations understand the possible benefits and implications of the Convention for artisanal and small-scale fisheries in developing countries.

Erromaurreko Iberiar Penintsulako antzinaroari buruzko materialak : Iberiako hegoaldeko herri eta kulturak

Traducido por Iñaki Villoslada Fernández

The Role of the Subthalamic Nucleus in L-DOPA Induced Dyskinesia in 6-Hydroxydopamine Lesioned Rats

14 p.

Numerical-Value Perturbation Method with Application of Solving Convective-Diffusion Integral Equation

The convective--diffusion equation is of primary importance in such fields as fluid dynamics and heat transfer hi the numerical methods solving the convective-diffusion equation, the finite volume method can use conveniently diversified grids (structured and unstructured grids) and is suitable for very complex geometry The disadvantage of FV methods compared to the finite difference method is that FV-methods of order higher than second are more difficult to develop in three-dimensional cases. The second-order central scheme (2cs) offers a good compromise among accuracy, simplicity and efficiency, however, it will produce oscillatory solutions when the grid Reynolds numbers are large and then very fine grids are required to obtain accurate solution. The simplest first-order upwind (IUW) scheme satisfies the convective boundedness criteria, however. Its numerical diffusion is large. The power-law scheme, QMCK and second-order upwind (2UW) schemes are also often used in some commercial codes. Their numerical accurate are roughly consistent with that of ZCS. Therefore, it is meaningful to offer higher-accurate three point FV scheme. In this paper, the numerical-value perturbational method suggested by Zhi Gao is used to develop an upwind and mixed FV scheme using any higher-order interpolation and second-order integration approximations, which is called perturbational finite volume (PFV) scheme. The PFV scheme uses the least nodes similar to the standard three-point schemes, namely, the number of the nodes needed equals to unity plus the face-number of the control volume. For instanc6, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D problems, 2~Dand 3-D flow model equations. Comparing with other standard three-point schemes, The PFV scheme has much smaller numerical diffusion than the first-order upwind (IUW) scheme, its numerical accuracy are also higher than the second-order central scheme (2CS), the power-law scheme (PLS), the QUICK scheme and the second-order upwind(ZUW) scheme.

An assessment of two decades of contaminant monitoring in the Nation’s Coastal Zone.

Executive Summary: Information found in this report covers the years 1986 through 2005. Mussel Watch began monitoring a suite of trace metals and organic contaminants such as DDT, PCBs and PAHs. Through time additional chemicals were added, and today approximately 140 analytes are monitored. The Mussel Watch Program is the longest running estuarine and coastal pollutant monitoring effort conducted in the United States that is national in scope each year. Hundreds of scientific journal articles and technical reports based on Mussel Watch data have been written; however, this report is the first that presents local, regional and national findings across all years in a Quick Reference format, suitable for use by policy makers, scientists, resource managers and the general public. Pollution often starts at the local scale where high concentrations point to a specific source of contamination, yet some contaminants such as PCBs are atmospherically transported across regional and national scales, resulting in contamination far from their origin. Findings presented here showed few national trends for trace metals and decreasing trends for most organic contaminants; however, a wide variety of trends, both increasing and decreasing, emerge at regional and local levels. For most organic contaminants, trends have resulted from state and federal regulation. The highest concentrations for both metal and organic contaminants are found near urban and industrial areas. In addition to monitoring throughout the nation’s coastal shores and Great Lakes, Mussel Watch samples are stored in a specimen bank so that trends can be determined retrospectively for new and emerging contaminants of concern. For example, there is heightened awareness of a group of flame retardants that are finding their way into the marine environment. These compounds, known as polybrominated diphenyl ethers (PBDEs), are now being studied using historic samples from the specimen bank and current samples to determine their spatial distribution. We will continue to use this kind of investigation to assess new contaminant threats. We hope you find this document to be valuable, and that you continue to look towards the Mussel Watch Program for information on the condition of your coastal waters. (PDF contains 118 pages)

Adiabatic shear localization: occurrence, theories, and applications

Fishing Long-Fingered Bats (Myotis capaccinii) Prey Regularly upon Exotic Fish

7 p.

Assessing the accessibility of everyday products

If a product is being designed to be genuinely inclusive, then the designers need to be able to assess the level of exclusion of the product that they are working on and to identify possible areas of improvement. To be of practical use, the assessments need to be quick, consistent and repeatable. The aim of this workshop is to invite attendees to participate in the evaluation of a number of everyday objects using an assessment technique being considered by the workshop organisers. The objectives of the workshop include evaluating the effectiveness of the assessment method, evaluating the accessibility of the products being assessed and to suggest revisions to the assessment scales being used. The assessment technique is to be based on the ONS capability measures [1]. This source recognises fourteen capability scales of which seven are particularly pertinent to product evaluation, namely: motion, dexterity, reach and stretch, vision, hearing, communication, and intellectual functioning. Each of these scales ranges from 0 (fully able) through 1 (minimal impairment) to 10 (severe impairment). The attendees will be asked to rate the products on these scales. Clearly the assessed accessibility of the product depends on the assumptions made about the context of use. The attendees will be asked to clearly note the assumptions that they are making about the context in which the product is being assessed. For instance, with a hot water bottle, assumptions have to be made about the availability of hot water and these can affect the overall accessibility rating. The workshop organisers will not specify the context of use as the aim is to identify how assessors would use the assessment method in the real world. The objects being assessed will include items such as remote controls, pill bottles, food packaging, hot water bottles and mobile telephones. the attendees will be encouraged to assess two or more products in detail. Helpers will be on hand to assist and observe the assessments. The assessments will be collated and compared and feedback about the assessment method sought from the attendees. Drawing on a preliminary review of the assessment results, initial conclusions will be presented at the end of the workshop. More detailed analyses will be made available in subsequent proceedings. It is intended that the workshop will provide workshop attendees with an opportunity to perform hands-on assessment of a number everyday products and identify features which are inclusive and those that are not. It is also intended to encourage an appreciation of the capabilities to be considered when evaluating accessibility.