Physiological potential of rice seeds treated with rhizobacteria or the insecticide thiamethoxam

Development of new technologies, aiming at increasing productivity in different crops, involves constant research on the effectiveness and application of these techniques in seed treatment. In this study, it was aimed at evaluating physiological potential of rice seeds treated with plant growth-promoting rhizobacteria (PGPR) (strains DFs185, DFs223, DFs306, DFs416), or with two dosages of the insecticide thiamethoxam. The variables assessed were: germination (G); first count of germination (FCG); cold test (CT); length of seedlings aerial parts (LAP), root system (LRS), and total length (TL); emergence speed index (ESI); emergence (E), at 14 days; and dry phytomass (DP). Treatments have had a positive effect on percentage of G, FCG and E. The strain DFs185 has promoted increase in percentage emergence, for five of the six lots assessed. The variables: LAP; LRS; TL; ESI; and DP have undergone low or none influence of treatments; and there has been no toxic effect of rhizobacteria or insecticide thiamethoxam. In the cold test, a negative effect of treatments has been detected. Seed treatment with rhizobacteria, as well as with thiamethoxam, improve quality of low quality rice seeds. The strain DFs185 is promising for treating rice seeds, once it stimulates seed germination and emergence.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Determinants of left ventricular mass as measured by Doppler echocardiography in pre-adolescents

This study examined factors contributing to the differences in left ventricular mass as measured by Doppler echocardiography in children. Fourteen boys (10.3 ± 0.3 years of age) and 1 1 girls (10.5 ± 0.4 years of age) participated in the study. Height and weight were measured, and relative body fat was determined from the measurement of skinfold thickness according to Slaughter et al. (1988). Lean Body Mass was then calculated by subtracting the fat mass from the total body mass. Sexual maturation was self-assessed using the stages of sexual maturation by Tanner (1962). Both pubic hair development and genital (penis or breast for boys and girls respectively) development were used to determine sexual maturation. Carotid Pulse pressure was assessed by applanation tomometry in the left carotid artery. Cardiac mass was measured by Doppler Echocardiography. Images of cardiac structures were taken using B-Mode and were then translated to M- Mode. The dimensions at the end diastole were obtained at the onset of the QRS complex of the electrocardiogram in a plane through a standard position. Measurements included: (a) the diameter of the left ventricle at the end diastole was measured from the septum edge to the endocardium mean border, (b) the posterior wall was measured as the distance from to anterior wall to the epicardium surface, and (c) the interventricular septum was quantified as the distance from the surface of the left ventricle border to the right ventricle septum surface. Systolic time measurements were taken at the peak of the T-wave of the electrocardiogram. Each measurement was taken three to five times before averaging. Average values were used to calculate cardiac mass using the following equation (Deveraux et al. 1986). Weekly physical activity metabolic equivalent was calculated using a standardize activity questionnaire (Godin and Shepard, 1985) and peakV02 was measured on a cycloergometer. There were no significant differences in cardiovascular mesurements between boys and girls. Left ventricular mass was correlated (p<0.05) with size, maturation, peakV02 and physical activity metabolic equivalent. In boys, lean body mass alone explained 36% of the variance in left ventricular mass while weight was the single strongest predictor of left ventricular mass (R =0.80) in girls. Lean body mass, genital developemnt and physical activity metabolic equivalent together explained 46% and 81% in boys and girls, respectively. However, the combination of lean body mass, genital development and peakV02 (ml kgLBM^ min"') explained up to 84% of the variance in left ventricular mass in girls, but added nothing in boys. It is concluded that left ventricular mass was not statistically different between pre-adolescent boys and girls suggesting that hormonal, and therefore, body size changes in adolescence have a main effect on cardiac development and its final outcome. Although body size parameters were the strongest correlates of left ventricular mass in this pre-adolescent group of children, to our knowledge, this is the first study to report that sexual maturation, as well as physical activity and fitness, are also strong associated with left ventricular mass in pre-adolescents, especially young females. Arterial variables, such as systolic blood pressure and carotid pulse pressure, are not strong determinants of left ventricular mass in this pre-adolescent group. In general, these data suggest that although there is no gender differences in the absolute values of left ventricular mass, as children grow, the factors that determine cardiac mass differ between the genders, even in the same pre-adolescent age.

Women’s Literary Club of St. Catharines Fonds

The Women's Literary Club of St. Catharines was founded in 1892 by a local author, Emma Harvey (Mrs. J.G.) Currie (1829-1913) and held its last official meeting on February 19, 1994. The Club developed, flourished and eventually waned. After more than one hundred successful years, the last members deposited the Club's archives at Brock University for the benefit of researchers, scholars and the larger community. The ‘object of the Club’ was established as “the promotion of literary pursuits.” The Club was a non-profit social organization composed of predominantly white, upper middle class women from the St. Catharines and surrounding areas. Club meetings were traditionally held fortnightly from March to December each year. The last meeting of the year was a celebration of their Club anniversary. The early meetings of the Club include papers presented and music performed by Club members. The literary pursuits that would dominate the agendas for the entire life of the Club reflected an interest in selected authors, national and local history, classical history, musical performances and current cultural and newsworthy events. For example in 1893 a typical meeting agendas would contain papers on Henry Wadsworth Longfellow, Hawaii, Brook Farm, Miss Louisa May Alcott and “Education of Women 100 years Ago.” Within the first year of the Club’s existence, detailed minute books became the norm and an annual agenda or program developed. The WLC collection contains a near complete set of meeting minutes from 1892 until 1995 and a comprehensive collection of yearly programs from 1983-1967 which members took great care to publish each year. Mrs. Currie brought together a group of women with a shared interest in literature and history, who wanted to pursue that interest in a formal and structured manner. She was well educated and influenced at an early age by her tutor and mentor William Kirby, local historian, writer and newspaper editor from Niagara-on-the-Lake. While Currie’s private education influenced her love of literature and history, the Club movement of the 1890’s offered a more public forum for her to share knowledge and learning with other women. Mrs. Currie was the wife of St. Catharines lawyer, James G. Currie, who also served as a Member of Parliament for the county of Lincoln. Mrs. W.H. McClive, who was also married to a St. Catharines lawyer, worked closely with Currie and they began research into the possibility of a literary Club in St. Catharines. Currie corresponded with a variety of literary Clubs across North America before she and Mrs.McClive tagged onto the momentum of the Club movement and published “A Clarion call for Women of St. Catharines To Form a Literary Club” in the local paper The St. Catharines Evening Journal. in 1892 and asked like Clubs to publish the news of their new Club. The early years of the WLC set the foundation of how the Club meetings and events would unfold for the next 80 plus years. Photos and minutes from the first ten years reveal an excitement and interest in organized Club outings. One particular event, an annual pilgrimage to the homestead of Laura Secord, became a yearly celebration for the Club. Club President, Mrs. Currie’s own personal work on Laura Secord amplified the Club’s interest in the ‘heroine of 1812’ and she allocated the profits from her publication on Secord in order to create a commemorative plaque/monument in the name of Laura Secord. The Club celebrated this event with a regular pilgrimage to this site. The connection felt by Club members and this memorial would continue until the Club’s last meetings. The majority of members in the early years were of the upper middle classes in the growing city of St. Catharines. Many of the charter members were the wives of merchants, business men, lawyers, doctors, even a hatter. Furthermore, the position of president was most often held by a woman with a comprehensive list of interests. This is particularly the case in Isabel Brighty McComb (1876-1941). Brighty who became a member in 1903, became Club president in 1932 and stayed in her post until her death in 1941. Similar to Mrs. Currie, Brighty was a local historian and published 2 booklets on local history. Her obituary indicates her position in the community as an author and involved community member committed to lifetime memberships in the Imperial Order of Daughters of Empire, I.O.D.E., the National Organization of Women, N.O.W. and the United Empire Loyalist Society, as well as the WLC. She was a locally known ‘teacher of elocution’ and a devoted researcher of Upper Canadian history. In a Club scrapbook dedicated to her, the biographical sketch illustrates the professionalism surrounding Brighty. There is very little personal history mentioned and the focus is on her literary works, her published essay, booklets and poetry. This professional focus, evident in both her obituary and the scrapbook, illustrate the diversity of these women, especially in their roles outside of the home. The WLC collection contains a vast array of essay, lectures clippings and scrapbooks from past meetings. Organized predominantly by topic or author, the folders and scrapbooks offer a substantial amount of research opportunity in the literary history of Canada. The dates, scope of topics and authors covered offer historians an exciting opportunity to examine the consumption of particular literary trends, artists and topics within the context of a midsized industrial city in English Canada. This is especially important because the agenda adhered to by the Club was bent on promoting, discussing and reviewing predominantly Canadian material. By connecting when and what these women were studying, scholars many gain a better understanding of the broader consumption and appreciation of literary and social trends of Canadian women outside of publishing and institutional records. Furthermore, because the agendas were set by and for these women, outside of the constructs of an institutionalized canon or agenda, they offer a fresh and on the ground examination of literary consumption over an extensive length of time.

Foraging ecology and parental care of common terns (Sterna hirundo) nesting in Windermere Basin, Lake Ontario

The relationships among chick feeding, size and type of prey item, and foraging time away from the brood have not been well studied in seabirds. This study investigated spatial and temporal patterns of foraging and chick-provisioning among 23 radio-tagged male common terns nesting at Hamilton Harbour, Lake Ontario during 1991 and 1992. Telemetry data were collected concurrently with behavioural observations from an elevated blind. Terns fitted with transmitters did not differ from controls with respect to either brood attendance, patterns of chick mortality, species and size distributions of prey delivered to offspring, or chick-provisioning rates. There was a clear separation of parental roles: males were primarily responsible for feeding chicks while females allocated more time to brood attendance. The prey species most commonly delivered to chicks by adults were rainbow smelt (Osmerus mordax) and alewife (A/osa pseudoharengus), followed in importance by larval fish, emerald shiner (Notropis antherinoides), salmonids, and fathead minnows (Pimepha/es prome/as). The relative proportions of various fish speCies delivered to chicks by males differed over the course of each breeding season, and there was also much variability in species composition of prey between years. Sizes of prey delivered to chicks also differed between sampling periods. The modal size of fish brought to chicks during Peak 1991 was 1.5 bill lengths, while the majority of prey in Late 1991 were small larval fish. The reverse trend occurred in 1992 when small fish were delivered to chicks predominantly during the Peak nesting period. During periods when predominantly small fish were delivered to chicks, the foraging activity of radio-tagged males was concentrated within a two kilometer radius of the colony. The observed variation in prey composition and foraging locations during the study likely reflects temporal variation in the availability of prey in the vicinity of the colony. Males delivered fish to chicks at a constant rate, while females 4 increased their feeding frequency over the first six to ten brood days. The mean length of fish delivered to chicks by adults increased significantly with increasing chick age. As a group, within each nesting period, transmittered males either foraged predominantly in the same directional bearing (north during Peak 1991, south during Late 1992), or concentrated foraging activity in the immediate vicinity of the colony (Late 1991, Peak 1992). However, individual radio-tagged males exhibited unique and predictable foraging patterns, often favouring specific locations within these areas and differing in their secondary foraging patterns. Overall, the Lake Ontario shoreline between NCB Bay" (3.5 km south of colony) and the lift bridge canal (4 km north of colony) was the foraging area used most frequently by radiotagged males during the chick-rearing period. Foraging patterns of transmittered males at Windermere Basin are similar to patterns of peak-nesting common terns, but differ from those of late-nesters, at a nearby colony (Port Colborne, Lake Erie). Differences between the foraging patterns of late-nesting terns at these colonies likely reflect differences in annual patterns of fish availability between the two locations. No relationship was found between foraging proficiency of adults and survival of offspring. Stochastic factors, such as predation by black-crowned nightherons (Nycticorax nycticorax) and adverse weather conditions during the early stages of chick rearing, may be more important determinants of common tern breeding success than parental quality or fish availability.

Using First Nations Children's Literature in the Classroom: Portfolio of Learning

A portfolio was developed to encourage teachers of Aboriginal children to include First Nations mentor texts into their daily teaching practices. The artifacts within the portfolio have been produced in accordance with guiding beliefs about how students, specifically First Nations students, learn. The portfolio supports the notion that Aboriginal children need to encounter representations of their own culture, histories and beliefs within the literature in order to be successful in school. The use of First Nations children’s literature in the classroom was explored with an emphasis on how using this literature will assist in improving literacy levels and the self-esteem of First Nations students.

The effects of oxidative stress on the retinal structure and function

Des études antérieures ont démontré que le métabolisme de la rétine, son apport sanguin et sa consommation de l'oxygène sont plus élevés dans le noir (Riva C.E. et al. 1983, Wang L. et al. 1996, Tam B.M. and Moritz O.L. 2007). Les stimuli physiologiques jouent supposément un rôle important dans le développement des différents systèmes nerveux (Arthur W. Spira, David Parkinson 1991). La privation de la rétine de son stimulus physiologique, la lumière, est un moyen valable de démontrer la validité de ce concept. D'autres études ont affirmé que les injections de dichlorure de paraquat dans la cavité vitréenne causent une sévère rétinopathie (Rétinopathie induite par paraquat: RIP). Cette rétinopathie est provoquée par les dérivés réactifs de l'oxygène (DRO) générés par le paraquat (Cingolani C. et al. 2006, Lu L. et al. 2006). Le but de notre premier projet (''Dark rearing project'') était de déterminer si les conséquences nocives de l'hyperoxie postnatale chez les rats albinos SD pourraient être amoindries en élevant une portée de rats au noir. Nos résultats suggèrent qu'une augmentation du métabolisme de la rétine causée par la déprivation de lumière chez les ratons, pourrait protéger ou masquer certains effets néfastes de l'hyperoxie postnatale. Le but de notre deuxième étude (''Paraquat project'') était d'examiner les possibles points de similitude entre RIP et d'autres modèles de rétinopathies oxydatives étudiés présentement par notre équipe, à savoir: Rétinopathie induite par l'oxygène (RIO) et Rétinopathie induite par la lumière (RIL). Nos résultats suggèrent que l'injection de dichlorure de paraquat dans la cavité vitréenne cause des changements sévères de la fonction de la rétine, tandis que sa structure semble intacte. La sévérité de ces changements dépend inversement de la maturité de la rétine au moment de l'injection.

Housing trajectories of individuals found not criminally responsible on account of mental disorder.

Au Canada, les Commissions d'Examen des Troubles Mentaux de chaque province ont la responsabilité de déterminer les conditions de prise en charge des personnes déclarées Non Criminellement Responsables pour cause de Troubles Mentaux (NCRTM) et de rendre, sur une base annuelle une des trois décisions suivantes: a) détention dans un hôpital, b) libération conditionnelle, ou c) libération absolue. Pour favoriser la réinsertion sociale, la libération conditionnelle peut être ordonnée avec la condition de vivre dans une ressource d’hébergement dans la communauté. Parmi les personnes vivant avec une maladie mentale, l’accès aux ressources d’hébergement a été associé à une plus grande stabilité résidentielle, une réduction de nombre et de la durée de séjours d'hospitalisation ainsi qu’une réduction des contacts avec le système judiciaire. Toutefois, l’accès aux ressources d’hébergement pour les personnes trouvées NCRTM est limité, en partie lié à la stigmatisation qui entoure cette population. Il existe peu d’études qui traitent du placement en ressources d’hébergement en psychiatrie légale. Pour répondre à cette question, cette thèse comporte trois volets qui seront présentés dans le cadre de deux manuscrits: 1) évaluer le rôle du placement en ressources d’hébergement sur la réhospitalisation et la récidive chez les personnes trouvées NCRTM; 2) décrire les trajectoires de disposition et de placement en ressources d’hébergement, et 3) mieux comprendre les facteurs associés à ces trajectoires. Les données de la province du Québec du Projet National de Trajectoires d’individus trouvés NCRTM ont été utilisées. Un total de 934 personnes trouvées NCRTM entre le 1er mai 2000 et le 30 avril 2005 compose cet échantillon. Dans le premier manuscrit, l’analyse de survie démontre que les individus placés dans un logement indépendant suite à une libération conditionnelle de la Commission d’Examen sont plus susceptibles de commettre une nouvelle infraction et d’être ré-hospitalisés que les personnes en ressources d’hébergement. Dans le deuxième article, l'analyse de données séquentielle a généré quatre modèles statistiquement stables de trajectoires de disposition et de placement résidentiel pour les 36 mois suivant un verdict de NCRTM: 1) libération conditionnelle dans une ressource d’hébergement (11%), 2) libération conditionnelle dans un logement autonome (32%), 3) détention (43%), et 4) libération absolue (14%). Une régression logistique multinomiale révèle que la probabilité d'un placement en ressource supervisée comparé au maintien en détention est significativement réduite pour les personnes traitées dans un hôpital spécialisé en psychiatrie légale, ainsi que pour ceux ayant commis un délit sévère. D'autre part, la probabilité d’être soumis à des dispositions moins restrictives (soit le logement indépendant et la libération absolue) est fortement associée à des facteurs cliniques tels qu’un nombre réduit d'hospitalisations psychiatriques antérieures, un diagnostic de trouble de l'humeur et une absence de diagnostic de trouble de la personnalité. Les résultats de ce projet doctoral soulignent la valeur protectrice des ressources en hébergement pour les personnes trouvées NCRTM, en plus d’apporter des arguments solides pour une gestion de risque chez les personnes trouvées NCRTM qui incorpore des éléments contextuels de prévention du risque, tel que l’accès à des ressources d’hébergement.

First Example of Organocatalysis by Polystyrene-Supported PAMAM Dendrimers: Highly Efficient and Reusable Catalyst for Knoevenagel Condensations

This paper describes the first use of polystyrene-supported poly(amidoamine) (PAMAM) dendrimers as heterogeneous basic organocatalysts for carbon–carbon bond formation. Polystyrene-supported PAMAM dendrimers of first, second and third generations have been used as reusable base catalysts in Knoevenagel condensations of carbonyl compounds with active methylene compounds. The reactions proceed in short periods of time and with 100% selectivity. This novel catalyst eliminates the use of aromatic and halogenated solvents, as well as complex purification processes. The catalysts can be recycled ten times.

First-principles study of the neutral molecular metal Ni(tmdt)2.

The electronic structure of the molecular solid Ni(tmdt)2, the only well characterized neutral molecular metal to date, has been studied by means of first-principles density functional calculations. It is shown that these calculations correctly describe the metallic vs semiconducting behavior of molecular conductors of this type. The origin of the band overlap leading to the metallic character and the associated Fermi surfaces has been studied.

Polyphase Implementation of Non-recursive Comb Decimators for Sigma-Delta A/D Converters

In a sigma-delta analog to digital (A/D) As most of the sigma-delta ADC applications require converter, the most computationally intensive block is decimation filters with linear phase characteristics, the decimation filter and its hardware implementation symmetric Finite Impulse Response (FIR) filters are may require millions of transistors. Since these widely used for implementation. But the number of FIR converters are now targeted for a portable application, filter coefficients will be quite large for implementing a a hardware efficient design is an implicit requirement. narrow band decimation filter. Implementing decimation In this effect, this paper presents a computationally filter in several stages reduces the total number of filter efficient polyphase implementation of non-recursive coefficients, and hence reduces the hardware complexity cascaded integrator comb (CIC) decimators for and power consumption [2]. Sigma-Delta Converters (SDCs). The SDCs are The first stage of decimation filter can be operating at high oversampling frequencies and hence implemented very efficiently using a cascade of integrators require large sampling rate conversions. The filtering and comb filters which do not require multiplication or and rate reduction are performed in several stages to coefficient storage. The remaining filtering is performed reduce hardware complexity and power dissipation. either in single stage or in two stages with more complex The CIC filters are widely adopted as the first stage of FIR or infinite impulse response (IIR) filters according to decimation due to its multiplier free structure. In this the requirements. The amount of passband aliasing or research, the performance of polyphase structure is imaging error can be brought within prescribed bounds by compared with the CICs using recursive and increasing the number of stages in the CIC filter. The non-recursive algorithms in terms of power, speed and width of the passband and the frequency characteristics area. This polyphase implementation offers high speed outside the passband are severely limited. So, CIC filters operation and low power consumption. The polyphase are used to make the transition between high and low implementation of 4th order CIC filter with a sampling rates. Conventional filters operating at low decimation factor of '64' and input word length of sampling rate are used to attain the required transition '4-bits' offers about 70% and 37% of power saving bandwidth and stopband attenuation. compared to the corresponding recursive and Several papers are available in literature that deals non-recursive implementations respectively. The same with different implementations of decimation filter polyphase CIC filter can operate about 7 times faster architecture for sigma-delta ADCs. Hogenauer has than the recursive and about 3.7 times faster than the described the design procedures for decimation and non-recursive CIC filters.

Sedimentology and Geochemistry of core sediments from the Ashtamudi estuary and the adjoining coastal plain,central Kerala,India

The evolution of coast through geological time scale is dependent on the transgression-regression event subsequent to the rise or fall of sea level. This event is accounted by investigation of the vertical sediment deposition patterns and their interrelationship for paleo-enviornmental reconstruction. Different methods like sedimentological (grain size and micro-morphological) and geochemical (elemental relationship) analyses as well as radiocarbon dating are generally used to decipher the sea level changes and paleoclimatic conditions of the Quaternary sediment sequence. For the Indian coast with a coastline length of about 7500 km, studies on geological and geomorphological signatures of sea level changes during the Quaternary were reported in general by researchers during the last two decades. However, for the southwest coast of India particularily Kerala which is famous for its coastal landforms comprising of estuaries, lagoons, backwaters, coastal plains, cliffs and barrier beaches, studies pertaining to the marine transgression-regression events in the southern region are limited. The Neendakara-Kayamkulam coastal stretch in central Kerala where the coast is manifested with shore parallel Kayamkulam Lagoon on one side and shore perpendicular Ashtamudi Estuary on the other side indicating existence of an uplifted prograded coastal margin followed by barrier beaches, backwater channels, ridge and runnel topography is an ideal site for studying such events. Hence the present study has been taken up in this context to address the gap area. The location for collection of core samples representing coastal plain, estuarylagoon and offshore regions have been identified based on published literature and available sedimentary records. The objectives of the research work are:  To study the lithological variations and depositional environments of sediment cores along the coastal plain, estuary-lagoon and offshore regions between Kollam and Kayamkulam in the central Kerala coast  To study the transportation and diagenetic history of sediments in the area  To investigate the geochemical characterization of sediments and to elucidate the source-sink relationship  To understand the marine transgression-regression events and to propose a conceptual model for the region The thesis comprises of 8 chapters. The first chapter embodies the preamble for the selection and significance of this research work. The study area is introduced with details on its physiographical, geological, geomorphological, rainfall and climate information. A review of literature, compiling the research on different aspects such as physico-chemical, geomorphological, tectonics, transgression-regression events are presented in the second chapter and they are broadly classified into three viz:- International, National and Kerala. The field data collection and laboratory analyses adopted in the research work are discussed in the third chapter. For collection of sediment core samples from the coastal plains, rotary drilling method was employed whereas for the estuary-lagoon and offshore locations the gravity/piston corer method was adopted. The collected subsurficial samples were analysed for texture, surface micro-texture, elemental analysis, XRD and radiocarbon dating techniques for age determination. The fourth chapter deals with the textural analysis of the core samples collected from various predefined locations of the study area. The result reveals that the Ashtamudi Estuary is composed of silty clay to clayey type of sediments whereas offshore cores are carpeted with silty clay to relict sand. Investigation of the source of sediments deposited in the coastal plain located on either side of the estuary indicates the dominance of terrigenous to marine origin in the southern region whereas it is predominantly of marine origin towards the north. Further the hydrodynamic conditions as well as the depositional enviornment of the sediment cores are elucidated based on statistical parameters that decipher the deposition pattern at various locations viz., coastal plain (open to closed basin), Ashtamudi Estuary (partially open to restricted estuary to closed basin) and offshore (open channel). The intensity of clay minerals is also discussed. From the results of radiocarbon dating the sediment depositional environments were deciphered.The results of the microtextural study of sediment samples (quartz grains) using Scanning Electron Microscope (SEM) are presented in the fifth chapter. These results throw light on the processes of transport and diagenetic history of the detrital sediments. Based on the lithological variations, selected quartz grains of different environments were also analysed. The study indicates that the southern coastal plain sediments were transported and deposited mechanically under fluvial environment followed by diagenesis under prolonged marine incursion. But in the case of the northern coastal plain, the sediments were transported and deposited under littoral environment indicating the dominance of marine incursion through mechanical as well as chemical processes. The quartz grains of the Ashtamudi Estuary indicate fluvial origin. The surface texture features of the offshore sediments suggest that the quartz grains are of littoral origin and represent the relict beach deposits. The geochemical characterisation of sediment cores based on geochemical classification, sediment maturity, palaeo-weathering and provenance in different environments are discussed in the sixth chapter. In the seventh chapter the integration of multiproxies data along with radiocarbon dates are presented and finally evolution and depositional history based on transgression–regression events is deciphered. The eighth chapter summarizes the major findings and conclusions of the study with recommendation for future work.

Preparation and applications of periodical gold nanoparticle arrays

Diese Arbeit beschäftigt sich mit der Herstellung und Anwendungen von periodischen Goldnanopartikel-Arrays (PPAs), die mit Hilfe von Nanosphären-Lithografie hergestellt wurden. In Abhängigkeit der verwendeten Nanosphären-Größe wurden dabei entweder kleine dreieckige Nanopartikel (NP) (bei Verwendung von Nanosphären mit einem Durchmesser von 330 nm) oder große dreieckige NPD sowie leicht gestreckte NP (bei Verwendung von Nanosphären mit einem Durchmesser von 1390 nm) hergestellt. Die Charakterisierung der PPAs erfolgte mit Hilfe von Rasterkraftmikroskopie, Rasterelektronenmikroskopie und optischer Spektroskopie. Die kleinen NP besitzen ein Achsverhältnis (AV) von 2,47 (Kantenlänge des NPs: (74+/-6) nm, Höhe: (30+/-4) nm. Die großen dreieckigen NP haben ein AV von 3 (Kantenlänge des NPs:(465+/-27) nm, Höhe: (1530+/-10) nm) und die leicht gestreckten NP (die aufgrund der Ausbildung von Doppelschichten ebenfalls auf der gleichen Probe erzeugt wurden) haben eine Länge von (364+/-16)nm, eine Breite von (150+/-20) nm und eine Höhe von (150+/-10)nm. Die optischen Eigenschaften dieser NP werden durch lokalisierte Oberflächenplasmon-Polariton Resonanzen (LPPRs) dominiert, d.h. von einem eingestrahlten elektromagnetischen Feld angeregte kollektive Schwingungen der Leitungsbandelektronen. In dieser Arbeit wurden drei signifikante Herausforderungen für Plasmonik-Anwendungen bearbeitet, welche die einzigartigen optischen Eigenschaften dieser NP ausnutzen. Erstens wurden Ergebnisse der selektiven und präzisen Größenmanipulation und damit einer Kontrolle der interpartikulären Abstände von den dreieckigen Goldnanopartikel mit Hilfe von ns-gepulstem Laserlicht präsentiert. Die verwendete Methode basiert hierbei auf der Größen- und Formabhängigkeit der LPPRs der NP. Zweitens wurde die sensorischen Fähigkeiten von Gold-NP ausgenutzt, um die Bildung von molekularen Drähten auf den PPAs durch schrittweise Zugabe von unterschiedlichen molekularen Spezies zu untersuchen. Hierbei wurde die Verschiebung der LSPPR in den optischen Spektren dazu ausgenutzt, die Bildung der Nanodrähte zu überwachen. Drittens wurden Experimente vorgestellt, die sich die lokale Feldverstärkung von NP zu nutze machen, um eine hochgeordnete Nanostrukturierung von Oberflächen mittels fs-gepulstem Laserlicht zu bewerkstelligen. Dabei zeigt sich, dass neben der verwendeten Fluenz die Polarisationsrichtung des eingestrahlten Laserlichts in Bezug zu der NP-Orientierung sowie die Größe der NP äußerst wichtige Parameter für die Nanostrukturierung darstellen. So konnten z.B. Nanolöcher erzeugt werden, die bei höheren Fluenzen zu Nanogräben und Nanokanälen zusammen wuchsen. Zusammengefasst lässt sich sagen, dass die in dieser Arbeit gewonnen Ergebnisse von enormer Wichtigkeit für weitere Anwendungen sind.

Systematics and evolution of the genus Deuterocohnia Mez (Bromeliaceae)

The present study investigates the systematics and evolution of the Neotropical genus Deuterocohnia Mez (Bromeliaceae). It provides a comprehensive taxonomic revision as well as phylogenetic analyses based on chloroplast and nuclear DNA sequences and presents a hypothesis on the evolution of the genus. A broad morphological, anatomical, biogeographical and ecological overview of the genus is given in the first part of the study. For morphological character assessment more than 700 herbarium specimens from 39 herbaria as well as living plant material in the field and in the living collections of botanical gardens were carefully examined. The arid habitats, in which the species of Deuterocohnia grow, are reflected by the morphological and anatomical characters of the species. Important characters for species delimitation were identified, like the length of the inflorescence, the branching order, the density of flowers on partial inflorescences, the relation of the length of the primary bracts to that of the partial inflorescence, the sizes of floral bracts, sepals and petals, flower colour, the presence or absence of a pedicel, the curvature of the stamina and the petals during anthesis. After scrutinizing the nomenclatural history of the taxa belonging to Deuterocohnia – including the 1992 syonymized genus Abromeitiella – 17 species, 4 subspecies and 4 varieties are accepted in the present revision. Taxonomic changes were made in the following cases: (I) New combinations: A. abstrusa (A. Cast.) N. Schütz is re-established – as defined by Castellanos (1931) – and transfered to D. abstrusa; D. brevifolia (Griseb.) M.A. Spencer & L.B. Sm. includes accessions of the former D. lorentziana (Mez) M.A. Spencer & L.B. Sm., which are not assigned to D. abstrusa; D. bracteosa W. Till is synonymized to D. strobilifera Mez; D. meziana Kuntze ex Mez var. carmineo-viridiflora Rauh is classified as a subspecies of D. meziana (ssp. carmineo-viridiflora (Rauh) N. Schütz); D. pedicellata W. Till is classified as a subspecies of D. meziana (ssp. pedicellata (W. Till) N. Schütz); D. scapigera (Rauh & L. Hrom.) M.A. Spencer & L.B. Sm ssp. sanctae-crucis R. Vásquez & Ibisch is classified as a species (D. sanctae-crucis (R. Vásquez & Ibisch) N. Schütz); (II) New taxa: a new subspecies of D. meziana Kuntze ex Mez is established; a new variety of D. scapigera is established; (the new taxa will be validly published elsewhere); (III) New type: an epitype for D. longipetala was chosen. All other species were kept according to Spencer and Smith (1992) or – in the case of more recently described species – according to the protologue. Beside the nomenclatural notes and the detailed descriptions, information on distribution, habitat and ecology, etymology and taxonomic delimitation is provided for the genus and for each of its species. An key was constructed for the identification of currently accepted species, subspecies and varieties. The key is based on easily detectable morphological characters. The former synonymization of the genus Abromeitiella into Deuterocohnia (Spencer and Smith 1992) is re-evalutated in the present study. Morphological as well as molecular investigations revealed Deuterocohnia incl. Abromeitiella as being monophyletic, with some indications that a monophyletic Abromeitiella lineage arose from within Deuterocohnia. Thus the union of both genera is confirmed. The second part of the present thesis describes and discusses the molecular phylogenies and networks. Molecular analyses of three chloroplast intergenic spacers (rpl32-trnL, rps16-trnK, trnS-ycf3) were conducted with a sample set of 119 taxa. This set included 103 Deuterocohnia accessions from all 17 described species of the genus and 16 outgroup taxa from the remainder of Pitcairnioideae s.str. (Dyckia (8 sp.), Encholirium (2 sp.), Fosterella (4 sp.) and Pitcairnia (2 sp.)). With its high sampling density, the present investigation by far represents the most comprehensive molecular study of Deuterocohnia up till now. All data sets were analyzed separately as well as in combination, and various optimality criteria for phylogenetic tree construction were applied (Maximum Parsimony, Maximum Likelihood, Bayesian inferences and the distance method Neighbour Joining). Congruent topologies were generally obtained with different algorithms and optimality criteria, but individual clades received different degrees of statistical support in some analyses. The rps16-trnK locus was the most informative among the three spacer regions examined. The results of the chloroplast DNA analyses revealed a highly supported paraphyly of Deuterocohnia. Thus, the cpDNA trees divide the genus into two subclades (A and B), of which Deuterocohnia subclade B is sister to the included Dyckia and Encholirium accessions, and both together are sister to Deuterocohnia subclade A. To further examine the relationship between Deuterocohnia and Dyckia/Encholirium at the generic level, two nuclear low copy markers (PRK exon2-5 and PHYC exon1) were analysed with a reduced taxon set. This set included 22 Deuterocohnia accessions (including members of both cpDNA subclades), 2 Dyckia, 2 Encholirium and 2 Fosterella species. Phylogenetic trees were constructed as described above, and for comparison the same reduced taxon set was also analysed at the three cpDNA data loci. In contrast to the cpDNA results, the nuclear DNA data strongly supported the monophyly of Deuterocohnia, which takes a sister position to a clade of Dyckia and Encholirium samples. As morphology as well as nuclear DNA data generated in the present study and in a former AFLP analysis (Horres 2003) all corroborate the monophyly of Deuterocohnia, the apparent paraphyly displayed in cpDNA analyses is interpreted to be the consequence of a chloroplast capture event. This involves the introgression of the chloroplast genome from the common ancestor of the Dyckia/ Encholirium lineage into the ancestor of Deuterocohnia subclade B species. The chloroplast haplotypes are not species-specific in Deuterocohnia. Thus, one haplotype was sometimes shared by several species, where the same species may harbour different haplotypes. The arrangement of haplotypes followed geographical patterns rather than taxonomic boundaries, which may indicate some residual gene flow among populations from different Deuteroccohnia species. Phenotypic species coherence on the background of ongoing gene flow may then be maintained by sets of co-adapted alleles, as was suggested by the porous genome concept (Wu 2001, Palma-Silva et al. 2011). The results of the present study suggest the following scenario for the evolution of Deuterocohnia and its species. Deuterocohnia longipetala may be envisaged as a representative of the ancestral state within the genus. This is supported by (1) the wide distribution of this species; (2) the overlap in distribution area with species of Dyckia; (3) the laxly flowered inflorescences, which are also typical for Dyckia; (4) the yellow petals with a greenish tip, present in most other Deuterocohnia species. The following six extant lineages within Deuterocohnia might have independently been derived from this ancestral state with a few changes each: (I) D. meziana, D. brevispicata and D. seramisiana (Bolivia, lowland to montane areas, mostly reddish-greenish coloured, very laxly to very densely flowered); (II) D. strobilifera (Bolivia, high Andean mountains, yellow flowers, densely flowered); (III) D. glandulosa (Bolivia, montane areas, yellow-greenish flowers, densely flowered); (IV) D. haumanii, D. schreiteri, D. digitata, and D. chrysantha (Argentina, Chile, E Andean mountains and Atacama desert, yellow-greenish flowers, densely flowered); (V) D. recurvipetala (Argentina, foothills of the Andes, recurved yellow flowers, laxly flowered); (VI) D. gableana, D. scapigera, D. sanctae-crucis, D. abstrusa, D. brevifolia, D. lotteae (former Abromeitiella species, Bolivia, Argentina, higher Andean mountains, greenish-yellow flowers, inflorescence usually simple). Originating from the lower montane Andean regions, at least four lineages of the genus (I, II, IV, VI) adapted in part to higher altitudes by developing densely flowered partial inflorescences, shorter flowers and – in at least three lineages (II, IV, VI) – smaller rosettes, whereas species spreading into the lowlands (I, V) developed larger plants, laxly flowered, amply branched inflorescences and in part larger flowers (I).

First-principles electronic theory of non-collinear magnetic order in transition-metal nanowires

The structural, electronic and magnetic properties of one-dimensional 3d transition-metal (TM) monoatomic chains having linear, zigzag and ladder geometries are investigated in the frame-work of first-principles density-functional theory. The stability of long-range magnetic order along the nanowires is determined by computing the corresponding frozen-magnon dispersion relations as a function of the 'spin-wave' vector q. First, we show that the ground-state magnetic orders of V, Mn and Fe linear chains at the equilibrium interatomic distances are non-collinear (NC) spin-density waves (SDWs) with characteristic equilibrium wave vectors q that depend on the composition and interatomic distance. The electronic and magnetic properties of these novel spin-spiral structures are discussed from a local perspective by analyzing the spin-polarized electronic densities of states, the local magnetic moments and the spin-density distributions for representative values q. Second, we investigate the stability of NC spin arrangements in Fe zigzag chains and ladders. We find that the non-collinear SDWs are remarkably stable in the biatomic chains (square ladder), whereas ferromagnetic order (q =0) dominates in zigzag chains (triangular ladders). The different magnetic structures are interpreted in terms of the corresponding effective exchange interactions J(ij) between the local magnetic moments μ(i) and μ(j) at atoms i and j. The effective couplings are derived by fitting a classical Heisenberg model to the ab initio magnon dispersion relations. In addition they are analyzed in the framework of general magnetic phase diagrams having arbitrary first, second, and third nearest-neighbor (NN) interactions J(ij). The effect of external electric fields (EFs) on the stability of NC magnetic order has been quantified for representative monoatomic free-standing and deposited chains. We find that an external EF, which is applied perpendicular to the chains, favors non-collinear order in V chains, whereas it stabilizes the ferromagnetic (FM) order in Fe chains. Moreover, our calculations reveal a change in the magnetic order of V chains deposited on the Cu(110) surface in the presence of external EFs. In this case the NC spiral order, which was unstable in the absence of EF, becomes the most favorable one when perpendicular fields of the order of 0.1 V/Å are applied. As a final application of the theory we study the magnetic interactions within monoatomic TM chains deposited on graphene sheets. One observes that even weak chain substrate hybridizations can modify the magnetic order. Mn and Fe chains show incommensurable NC spin configurations. Remarkably, V chains show a transition from a spiral magnetic order in the freestanding geometry to FM order when they are deposited on a graphene sheet. Some TM-terminated zigzag graphene-nanoribbons, for example V and Fe terminated nanoribbons, also show NC spin configurations. Finally, the magnetic anisotropy energies (MAEs) of TM chains on graphene are investigated. It is shown that Co and Fe chains exhibit significant MAEs and orbital magnetic moments with in-plane easy magnetization axis. The remarkable changes in the magnetic properties of chains on graphene are correlated to charge transfers from the TMs to NN carbon atoms. Goals and limitations of this study and the resulting perspectives of future investigations are discussed.