Fenyylipropanoidien, erityisesti ferulahappojen hapettavat kytkeytymisreaktiot kasvin soluseinän biosynteesissä

Tässä kirjallisuuskatsauksessa perehdyttiin ensisijaisesti puuvartisten- ja ruohokasvien soluseinien fenyylipropanoidien ja ferulahappojen biosynteesiin ja kytkeytymisreaktioihin. Fenyylipropanoidireitti alkaa fenyylialaniinista ja johtaa monien prekursoreiden kuten lignaanien, flavonoidien, salisyylihappojen ja ligniiniprekursoreiden syntymiseen. Tutkielmassa keskityttiin ligniiniprekursoreiden muodostumiseen ja erityisesti sen biosynteesireitin välituotteen, ferulahapon hapetettuihin kytkeytymisreaktioihin kasvien soluseinillä. Fenyylipropanoiditutkimuksen lähtökohtana on jo vuosia ollut selvittää biosynteesireittejä ja menetelmiä, joiden avulla ligniini saadaan kasvin soluseinältä liukenemaan ja hiilihydraatti otettua talteen. Eräs tapa tunnistaa näitä hajoamistapahtumia on tutkia fenyylipropanoidien kytkentöjen muodostumista. Tässä pro gradu -tutkielmassa fenyylipropanoidireitin välituotteiden entsyymien säätelyä tarkasteltiin luonnonvaraisissa ja geneettisesti muunnelluissa kasveissa. Bieosynteesireitti selkeytyi paljon. Lisäksi siirtogeenisillä kasveilla havaittiin kokonaan uusia kytkentöjä ja rakenteita. Eräillä geeniyhdistelmillä voitiin lisätä tuntuvasti hiilihydraattimäärää samalla kun ligniinin kokonaismäärä väheni. Näin arveltiin voitavan kasvattaa biomassan määrää puukasveilla. Ferulahapot dehydrogenoituvat entsymaattisesti hapettavissa olosuhteissa fenoksiradikaaleiksi, jotka reagoivat edelleen muodostaen toisen radikaalimonomeerin tai -polymeerin kanssa kytkentöjä. Soluseinä tuottaa radikaalireaktioissa tarvitsemansa hapettimet ja entsyymit, vetyperoksidin ja peroksidaasin itse. Ferulahapon monomeerit ja dimeerit muodostavat esterisidoksia soluseinän hemiselluloosan kanssa. Näin syntyneet ferulaattidimeerit ja -trimeerit muodostivat ristikytkentöjä hiilihydraattien ja ligniinin välille sekä yhden tai useamman polysakkaridiketjun välille. Ferulahappojen katsottiin olevan lignifioitumisen aloituskohtia soluseinillä ja yhdistävän kaksi suurta polymeerista verkkorakennetta toisiinsa. Myös soluseinän hiilihydraattien koostumuksen havaittiin vaikuttavan muodostuvien kytkentöjen rakenteeseen. Lopuksi tarkasteltiin vielä ferulahapon antioksidatiivisia ominaisuuksia. Todettiin ligniinin ja ferulahapon määrän korreloivan soluseinän peroksidaasi- ja vetyperoksidimäärän kanssa. Kaveissa monet taudinaiheuttajat, vioittuneet kasvin osat sekä UV-säteily lisäsivät peroksidaasien tuotantoa ja edelleen ferulahappojen määrää. Fenoksiradikaalina ferulahappo kykeni eliminoimaan vetyperoksidin haitallisten happiradikaalien vaikutuksia pelkistämällä ne hapettuen itse radikaalisessa kytkeytymisreaktiossa. Tämä johti mielenkiintoisiin tulevaisuuden näkymiin ferulahaposta funktionaalisena elintarvikkeena, lääkeaineena sekä kosmeettisena valmisteena.

Tietämisen politiikka : Kokemuksellinen tieto kunnan hallinnassa

The present study examines citizen participation in local government and municipal democracy. Previous research has shown that the prerequisite for active citizenship lies in the opportunities available for local residents to determine which perspectives and planning needs are relevant. This research looks at whether the conception of knowledge employed in municipal planning allows for this kind of active role for local citizens. Methodologically the study employs an hermeneutic approach. The aim has been to identify various approaches steering the practice of municipal democracy. The theory behind the study comes from the assumption of the intersubjectivity of reality. Construing the rationality of one s own behaviour is seen as a prerequisite for meaningful action. In this context, criteria for the functionality of municipal democracy and the purpose of strengthening citizen participation are defined. The study is divided into two parts. Firstly, the purpose of participation and the opportunities for local residents to contribute is examined theoretically with reference to previous studies. The intention is to provide an overview of the Finnish cross-disciplinary debate on resident participation. This debate is reflected onto the prevailing views on changes in the municipal operating environment and modes of operation. In conclusion, a theoretical model is constructed to explain how the various modes of operation in regional municipalities affect the purpose of resident participation and the utilisation of information received through this participation. The second part of the study discusses the utilisation of this information and knowledge acquired through the participation of local residents and all those involved in political and administrative processes in municipalities. These first-hand reports are analysed using the model constructed earlier in the study. The goal is to understand how political and administrative practice affects opportunities for local residents to participate and contribute. The core of this analysis is based on the pragmatic conception of knowledge employed in municipal administration. The study argues that the normal practice of municipal administration does not support the systematic utilisation of local residents experience. This is caused by two interlinked factors: firstly, knowledge constructed through these practices requires that the knowledge is apolitical; secondly, arising from this there is confusion with regard to when during a planning process does information obtained from the public become relevant; in other words, what are the politics of knowledge? The study suggests that the solution is in the complementary concept of knowledge, which implicitly acknowledges the politics of knowledge. The complementary concept of knowledge would serve the politicisation of issues on the level of interpretations linked with social reality, an indispensable requirement for functional democracy. Keywords: participation, municipal democracy, knowledge base for planning, experiential knowledge

Postglacial climate changes and vegetation responses in northern Europe

Postglacial climate changes and vegetation responses were studied using a combination of biological and physical indicators preserved in lake sediments. Low-frequency trends, high-frequency events and rapid shifts in temperature and moisture balance were probed using pollen-based quantitative temperature reconstructions and oxygen-isotopes from authigenic carbonate and aquatic cellulose, respectively. Pollen and plant macrofossils were employed to shed light on the presence and response rates of plant populations in response to climate changes, particularly focusing on common boreal and temperate tree species. Additional geochemical and isotopic tracers facilitated the interpretation of pollen- and oxygen-isotope data. The results show that the common boreal trees were present in the Baltic region (~55°N) during the Lateglacial, which contrasts with the traditional view of species refuge locations in the south-European peninsulas during the glacial/interglacial cycles. The findings of this work are in agreement with recent paleoecological and genetic evidence suggesting that scattered populations of tree species persisted at higher latitudes, and that these taxa were likely limited to boreal trees. Moreover, the results demonstrate that stepwise changes in plant communities took place in concert with major climate fluctuations of the glacial/interglacial transition. Postglacial climate trends in northern Europe were characterized by rise, maxima and fall in temperatures and related changes in moisture balance. Following the deglaciation of the Northern Hemisphere and the early Holocene reorganization of the ice-ocean-atmosphere system, the long-term temperature trends followed gradually decreasing summer insolation. The early Holocene (~11,700-8000 cal yr BP) was overall cool, moist and oceanic, although the earliest Holocene effective humidity may have been low particularly in the eastern part of northern Europe. The gradual warming trend was interrupted by a cold event ~8200 cal yr BP. The maximum temperatures, ~1.5-3.0°C above modern values, were attained ~8000-4000 cal yr BP. This mid-Holocene peak warmth was coupled with low lake levels, low effective humidity and summertime drought. The late Holocene (~4000 cal yr BP-present) was characterized by gradually decreasing temperatures, higher lake levels and higher effective humidity. Moreover, the gradual trends of the late Holocene were probably superimposed by higher-frequency variability. The spatial variability of the Holocene temperature and moisture balance patterns were tentatively attributed to the differing heat capacities of continents and oceans, changes in atmospheric circulation modes and position of sites and subregions with respect to large water bodies and topographic barriers. The combination of physical and biological proxy archives is a pivotal aspect of this work, because non-climatic factors, such as postglacial migration, disturbances and competitive interactions, can influence reshuffling of vegetation and hence, pollen-based climate reconstructions. The oxygen-isotope records and other physical proxies presented in this work manifest that postglacial climate changes were the main driver of the establishment and expansion of temperate and boreal tree populations, and hence, large-scale and long-term vegetation patterns were in dynamic equilibrium with climate. A notable exception to this pattern may be the postglacial invasion of Norway spruce and the related suppression of mid-Holocene temperate forest. This salient step in north-European vegetation history, the development of the modern boreal ecosystem, cannot be unambiguously explained by current evidence of postglacial climate changes. The results of this work highlight that plant populations, including long-lived trees, may be able to respond strikingly rapidly to changes in climate. Moreover, interannual and seasonal variation and extreme events can exert an important influence on vegetation reshuffling. Importantly, the studies imply that the presence of diffuse refuge populations or local stands among the prevailing vegetation may have provided the means for extraordinarily rapid vegetation responses. Hence, if scattered populations are not provided and tree populations are to migrate long distances, their capacity to keep up with predicted rates of future climate change may be lower than previously thought.

Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Aika ennen aluepolitiikkaa. Pohjoisen kehityshankkeet ja alueiden kehittämisen idea 1950-luvun Suomessa

The dissertation focuses on the recognition of the problems of uneven regional development in Finland in the 1950s, and the way the idea of controlling this development was introduced to Finnish politics. Since it is often stated that Finnish regional policy only began in the mid-1960s, the period at hand is considered to fall in the time before regional policy. However, various ideas, plans and projects of regional development as well as different aims of development were brought forward and discussed already in the 1950s. These give an interesting perspective to the ideas of later regional development. In the 1950s, many Finnish politicians became more conscious of the unavoidable societal change. The need for overall modernisation of the society made it reasonable to expect a growing level of unemployment and eagerness to migration. The uneven distribution of well-being was also feared to cause discontent and political changes. International experience proved interfering in the regional development possible when using the argument of public interest ; the measures taken increased the level of well-being, helped sustain societal balance, and supported national economy. Many of the development projects of the 1950s focused on Northern Finland, the natural resources of which were considered an important reserve and the political climate of which was regarded unstable. After the late 1940s, regional development was discussed frequently both on the national and the regional level. Direct and indirect support was given to less developed areas and the government outlined thorough investigations in order to relieve the regional problem. Towards the end of the decade, the measures taken were already often connected to the idea of equality. In the 1950s the conflicts within and between the largest Finnish political parties significantly affected the decisions of regional development. There are three case studies in this qualitative research based on the narrative method. The case studies clarify the characteristics of the 1950s regional development. In the first one, the representatives of the northern region and the state first discuss the location of a state-run nitrogen fertilizer factory and later the location of a new university. In the second, the aims and perspectives of private entrepreneurs and the state collide due to ideas of statist industrialisation projects and later due to an idea of a tax relief targeting northern industry. In the third case, the main role is given to the changing rural areas, in relation to which societal development and urbanisation were often measured. The regional development of the 1950s laid groundwork for the new, more established regional policy. The early problem solving actions were aimed both at the prevailing situation and the future and thus showed the way for the upcoming actions. Regional development policy existed already before regional policy.

Host Rock Classification (HRC) system for nuclear waste disposal in crystalline bedrock

A new rock mass classification scheme, the Host Rock Classification system (HRC-system) has been developed for evaluating the suitability of volumes of rock mass for the disposal of high-level nuclear waste in Precambrian crystalline bedrock. To support the development of the system, the requirements of host rock to be used for disposal have been studied in detail and the significance of the various rock mass properties have been examined. The HRC-system considers both the long-term safety of the repository and the constructability in the rock mass. The system is specific to the KBS-3V disposal concept and can be used only at sites that have been evaluated to be suitable at the site scale. By using the HRC-system, it is possible to identify potentially suitable volumes within the site at several different scales (repository, tunnel and canister scales). The selection of the classification parameters to be included in the HRC-system is based on an extensive study on the rock mass properties and their various influences on the long-term safety, the constructability and the layout and location of the repository. The parameters proposed for the classification at the repository scale include fracture zones, strength/stress ratio, hydraulic conductivity and the Groundwater Chemistry Index. The parameters proposed for the classification at the tunnel scale include hydraulic conductivity, Q´ and fracture zones and the parameters proposed for the classification at the canister scale include hydraulic conductivity, Q´, fracture zones, fracture width (aperture + filling) and fracture trace length. The parameter values will be used to determine the suitability classes for the volumes of rock to be classified. The HRC-system includes four suitability classes at the repository and tunnel scales and three suitability classes at the canister scale and the classification process is linked to several important decisions regarding the location and acceptability of many components of the repository at all three scales. The HRC-system is, thereby, one possible design tool that aids in locating the different repository components into volumes of host rock that are more suitable than others and that are considered to fulfil the fundamental requirements set for the repository host rock. The generic HRC-system, which is the main result of this work, is also adjusted to the site-specific properties of the Olkiluoto site in Finland and the classification procedure is demonstrated by a test classification using data from Olkiluoto. Keywords: host rock, classification, HRC-system, nuclear waste disposal, long-term safety, constructability, KBS-3V, crystalline bedrock, Olkiluoto

Bayesian fisheries stock assessment: integrating and updating knowledge

In this thesis the use of the Bayesian approach to statistical inference in fisheries stock assessment is studied. The work was conducted in collaboration of the Finnish Game and Fisheries Research Institute by using the problem of monitoring and prediction of the juvenile salmon population in the River Tornionjoki as an example application. The River Tornionjoki is the largest salmon river flowing into the Baltic Sea. This thesis tackles the issues of model formulation and model checking as well as computational problems related to Bayesian modelling in the context of fisheries stock assessment. Each article of the thesis provides a novel method either for extracting information from data obtained via a particular type of sampling system or for integrating the information about the fish stock from multiple sources in terms of a population dynamics model. Mark-recapture and removal sampling schemes and a random catch sampling method are covered for the estimation of the population size. In addition, a method for estimating the stock composition of a salmon catch based on DNA samples is also presented. For most of the articles, Markov chain Monte Carlo (MCMC) simulation has been used as a tool to approximate the posterior distribution. Problems arising from the sampling method are also briefly discussed and potential solutions for these problems are proposed. Special emphasis in the discussion is given to the philosophical foundation of the Bayesian approach in the context of fisheries stock assessment. It is argued that the role of subjective prior knowledge needed in practically all parts of a Bayesian model should be recognized and consequently fully utilised in the process of model formulation.

Paleomagnetic and rock magnetic study with emphasis on the Precambrian intrusions and impact structures in Fennoscandia and South Africa

The importance of supercontinents in our understanding of the geological evolution of the planet Earth has been recently emphasized. The role of paleomagnetism in reconstructing lithospheric blocks in their ancient paleopositions is vital. Paleomagnetism is the only quantitative tool for providing ancient latitudes and azimuthal orientations of continents. It also yields information of content of the geomagnetic field in the past. In order to obtain a continuous record on the positions of continents, dated intrusive rocks are required in temporal progression. This is not always possible due to pulse-like occurrences of dykes. In this work we demonstrate that studies of meteorite impact-related rocks may fill some gaps in the paleomagnetic record. This dissertation is based on paleomagnetic and rock magnetic data obtained from samples of the Jänisjärvi impact structure (Russian Karelia, most recent 40Ar-39Ar age of 682 Ma), the Salla diabase dyke (North Finland, U-Pb 1122 Ma), the Valaam monzodioritic sill (Russian Karelia, U-Pb 1458 Ma), and the Vredefort impact structure (South Africa, 2023 Ma). The paleomagnetic study of Jänisjärvi samples was made in order to obtain a pole for Baltica, which lacks paleomagnetic data from 750 to ca. 600 Ma. The position of Baltica at ca. 700 Ma is relevant in order to verify whether the supercontinent Rodinia was already fragmented. The paleomagnetic study of the Salla dyke was conducted to examine the position of Baltica at the onset of supercontinent Rodinia's formation. The virtual geomagnetic pole (VGP) from Salla dyke provides hints that the Mesoproterozoic Baltica - Laurentia unity in the Hudsonland (Columbia, Nuna) supercontinent assembly may have lasted until 1.12 Ga. Moreover, the new VGP of Salla dyke provides new constraint on the timing of the rotation of Baltica relative to Laurentia (e.g. Gower et al., 1990). A paleomagnetic study of the Valaam sill was carried out in order to shed light into the question of existence of Baltica-Laurentia unity in the supercontinent Hudsonland. Combined with results from dyke complex of the Lake Ladoga region (Schehrbakova et al., 2008) a new robust paleomagnetic pole for Baltica is obtained. This pole places Baltica on a latitude of 10°. This low latitude location is supported also by Mesoproterozoic 1.5 1.3 Ga red-bed sedimentation (for example the Satakunta sandstone). The Vredefort impactite samples provide a well dated (2.02 Ga) pole for the Kaapvaal Craton. Rock magnetic data reveal unusually high Koenigsberger ratios (Q values) in all studied lithologies of the Vredefort dome. The high Q values are now first time also seen in samples from the Johannesburg Dome (ca. 120 km away) where there is no impact evidence. Thus, a direct causative link of high Q values to the Vredefort impact event can be ruled out.

Homogeneous model theory of metric structures

This thesis studies homogeneous classes of complete metric spaces. Over the past few decades model theory has been extended to cover a variety of nonelementary frameworks. Shelah introduced the abstact elementary classes (AEC) in the 1980s as a common framework for the study of nonelementary classes. Another direction of extension has been the development of model theory for metric structures. This thesis takes a step in the direction of combining these two by introducing an AEC-like setting for studying metric structures. To find balance between generality and the possibility to develop stability theoretic tools, we work in a homogeneous context, thus extending the usual compact approach. The homogeneous context enables the application of stability theoretic tools developed in discrete homogeneous model theory. Using these we prove categoricity transfer theorems for homogeneous metric structures with respect to isometric isomorphisms. We also show how generalized isomorphisms can be added to the class, giving a model theoretic approach to, e.g., Banach space isomorphisms or operator approximations. The novelty is the built-in treatment of these generalized isomorphisms making, e.g., stability up to perturbation the natural stability notion. With respect to these generalized isomorphisms we develop a notion of independence. It behaves well already for structures which are omega-stable up to perturbation and coincides with the one from classical homogeneous model theory over saturated enough models. We also introduce a notion of isolation and prove dominance for it.

Distortion of Dimension under Quasiconformal Mappings

Quasiconformal mappings are natural generalizations of conformal mappings. They are homeomorphisms with 'bounded distortion' of which there exist several approaches. In this work we study dimension distortion properties of quasiconformal mappings both in the plane and in higher dimensional Euclidean setting. The thesis consists of a summary and three research articles. A basic property of quasiconformal mappings is the local Hölder continuity. It has long been conjectured that this regularity holds at the Sobolev level (Gehring's higher integrabilty conjecture). Optimal regularity would also provide sharp bounds for the distortion of Hausdorff dimension. The higher integrability conjecture was solved in the plane by Astala in 1994 and it is still open in higher dimensions. Thus in the plane we have a precise description how Hausdorff dimension changes under quasiconformal deformations for general sets. The first two articles contribute to two remaining issues in the planar theory. The first one concerns distortion of more special sets, for rectifiable sets we expect improved bounds to hold. The second issue consists of understanding distortion of dimension on a finer level, namely on the level of Hausdorff measures. In the third article we study flatness properties of quasiconformal images of spheres in a quantitative way. These also lead to nontrivial bounds for their Hausdorff dimension even in the n-dimensional case.

Computational Methods for Detecting Large-Scale Chromosome Rearrangements in SNP Data

Large-scale chromosome rearrangements such as copy number variants (CNVs) and inversions encompass a considerable proportion of the genetic variation between human individuals. In a number of cases, they have been closely linked with various inheritable diseases. Single-nucleotide polymorphisms (SNPs) are another large part of the genetic variance between individuals. They are also typically abundant and their measuring is straightforward and cheap. This thesis presents computational means of using SNPs to detect the presence of inversions and deletions, a particular variety of CNVs. Technically, the inversion-detection algorithm detects the suppressed recombination rate between inverted and non-inverted haplotype populations whereas the deletion-detection algorithm uses the EM-algorithm to estimate the haplotype frequencies of a window with and without a deletion haplotype. As a contribution to population biology, a coalescent simulator for simulating inversion polymorphisms has been developed. Coalescent simulation is a backward-in-time method of modelling population ancestry. Technically, the simulator also models multiple crossovers by using the Counting model as the chiasma interference model. Finally, this thesis includes an experimental section. The aforementioned methods were tested on synthetic data to evaluate their power and specificity. They were also applied to the HapMap Phase II and Phase III data sets, yielding a number of candidates for previously unknown inversions, deletions and also correctly detecting known such rearrangements.

The Most Probable Bayesian Network and Beyond

This doctoral dissertation introduces an algorithm for constructing the most probable Bayesian network from data for small domains. The algorithm is used to show that a popular goodness criterion for the Bayesian networks has a severe sensitivity problem. The dissertation then proposes an information theoretic criterion that avoids the problem.

Methods for Answer Extraction in Textual Question Answering

In this thesis we present and evaluate two pattern matching based methods for answer extraction in textual question answering systems. A textual question answering system is a system that seeks answers to natural language questions from unstructured text. Textual question answering systems are an important research problem because as the amount of natural language text in digital format grows all the time, the need for novel methods for pinpointing important knowledge from the vast textual databases becomes more and more urgent. We concentrate on developing methods for the automatic creation of answer extraction patterns. A new type of extraction pattern is developed also. The pattern matching based approach chosen is interesting because of its language and application independence. The answer extraction methods are developed in the framework of our own question answering system. Publicly available datasets in English are used as training and evaluation data for the methods. The techniques developed are based on the well known methods of sequence alignment and hierarchical clustering. The similarity metric used is based on edit distance. The main conclusions of the research are that answer extraction patterns consisting of the most important words of the question and of the following information extracted from the answer context: plain words, part-of-speech tags, punctuation marks and capitalization patterns, can be used in the answer extraction module of a question answering system. This type of patterns and the two new methods for generating answer extraction patterns provide average results when compared to those produced by other systems using the same dataset. However, most answer extraction methods in the question answering systems tested with the same dataset are both hand crafted and based on a system-specific and fine-grained question classification. The the new methods developed in this thesis require no manual creation of answer extraction patterns. As a source of knowledge, they require a dataset of sample questions and answers, as well as a set of text documents that contain answers to most of the questions. The question classification used in the training data is a standard one and provided already in the publicly available data.

Efficient search for statistically significant dependency rules in binary data

Analyzing statistical dependencies is a fundamental problem in all empirical science. Dependencies help us understand causes and effects, create new scientific theories, and invent cures to problems. Nowadays, large amounts of data is available, but efficient computational tools for analyzing the data are missing. In this research, we develop efficient algorithms for a commonly occurring search problem - searching for the statistically most significant dependency rules in binary data. We consider dependency rules of the form X->A or X->not A, where X is a set of positive-valued attributes and A is a single attribute. Such rules describe which factors either increase or decrease the probability of the consequent A. A classical example are genetic and environmental factors, which can either cause or prevent a disease. The emphasis in this research is that the discovered dependencies should be genuine - i.e. they should also hold in future data. This is an important distinction from the traditional association rules, which - in spite of their name and a similar appearance to dependency rules - do not necessarily represent statistical dependencies at all or represent only spurious connections, which occur by chance. Therefore, the principal objective is to search for the rules with statistical significance measures. Another important objective is to search for only non-redundant rules, which express the real causes of dependence, without any occasional extra factors. The extra factors do not add any new information on the dependence, but can only blur it and make it less accurate in future data. The problem is computationally very demanding, because the number of all possible rules increases exponentially with the number of attributes. In addition, neither the statistical dependency nor the statistical significance are monotonic properties, which means that the traditional pruning techniques do not work. As a solution, we first derive the mathematical basis for pruning the search space with any well-behaving statistical significance measures. The mathematical theory is complemented by a new algorithmic invention, which enables an efficient search without any heuristic restrictions. The resulting algorithm can be used to search for both positive and negative dependencies with any commonly used statistical measures, like Fisher's exact test, the chi-squared measure, mutual information, and z scores. According to our experiments, the algorithm is well-scalable, especially with Fisher's exact test. It can easily handle even the densest data sets with 10000-20000 attributes. Still, the results are globally optimal, which is a remarkable improvement over the existing solutions. In practice, this means that the user does not have to worry whether the dependencies hold in future data or if the data still contains better, but undiscovered dependencies.

Ohjelmiston käyttöliittymään kohdistuvat riskit määrittelyvaiheen käyttöliittymäsuunnittelun jälkeen

Ohjelmiston loppukäyttäjiä suoraviivaisesti tukevan toiminnallisuuden ja tietosisällön määrittely on haastavaa, ja muutokset ohjelmiston määrityksiin aiheuttavat usein merkittäviä lisäkustannuksia ohjelmistoprojekteissa. Vaatimusmäärittelyn kattavuutta voidaan parantaa kartoittamalla käyttäjien työtehtävät sekä suunnittelemalla valmis käyttöliittymäratkaisu jo määrittelyvaiheen alussa, jolloin määritellyn tietosisällön ja toiminnallisuuden toimivuus loppukäyttäjien työtehtävien yhteydessä voidaan testata käyttöliittymäprototyyppien avulla. Testauksen lisäksi käyttöliittymäratkaisun näyttökuvia voidaan käyttää asiakkaan ja toimittajan välisenä neuvottelu- ja sopimusvälineenä, jonka perusteella valmistuneen ohjelmiston käyttöliittymäratkaisu voidaan hyväksyä projektin päätteeksi. Käyttöliittymän testauksesta huolimatta käyttöliittymäratkaisuun kohdistuu projektin aikana vielä useita riskejä. Koska yksittäiset näyttökuvat eivät kuvaa kattavasti käyttöliittymän toimintalogiikkaa, käyttöliittymän toteuttaminen pelkkien näyttökuvien perusteella johtaisi helposti väärinymmärryksistä aiheutuviin hallitsemattomiin muutoksiin käyttöliittymäratkaisussa. Väärinymmärrysten välttämiseksi käyttöliittymän toimintalogiikka kannattaa kuvata erikseen käyttötilanteiden etenemistä esittävien näyttökuvasarjojen avulla. Näyttökuvasarjojen laatiminen on kuitenkin työlästä, ja yksinkertaisistakin käyttötilanteista syntyy usein pitkiä kuvasarjoja. Tässä työssä kehitettyjen sanallisten käyttösekvenssikuvausten avulla yksinkertaisten käyttötilanteiden toimintalogiikka on mahdollista dokumentoida näyttökuvasarjoja tiiviimmin. Lisäksi toteutustyötä voidaan helpottaa täydentämällä dokumentaatiota tässä työssä kehitetyillä komponenttikohtaisilla toimintalogiikan kuvauksilla. Tässä tutkielmassa arvioidaan määrittelyvaiheessa suunniteltuun käyttöliittymäratkaisuun projektin aikana kohdistuvia riskejä sekä riskien minimointia erityisesti käyttöliittymän dokumentoinnin avulla. Esimerkkitapauksena käytetään NCC Rakennus Oy:n tuntitietojen kirjausohjelmiston kehitysprojektia, jonka toteutus on tarkoitus tehdä osana monille toimialoille suunnattua WM-data Oy:n tuotekehitysprojektia. Aiheluokat (Computing Reviews 1998): D.2.1, H.5.2