A comparison of pain scales in Thai children.

Three commonly used pain scales, the visual analogue scale, the Wong-Baker Faces Pain Scale, and the Faces Pain Scale Revised were administered to 122 Thai children, of whom half were HIV infected, in order to assess their validity. These scales presented moderate to good correlation and moderate agreement, sufficient for valid use in Thai children.

Subjective mental time: the functional architecture of projecting the self to past and future.

Abstract Human experience takes place in the line of mental time (MT) created through 'self-projection' of oneself to different time-points in the past or future. Here we manipulated self-projection in MT not only with respect to one's life events but also with respect to one's faces from different past and future time-points. Behavioural and event-related functional magnetic resonance imaging activity showed three independent effects characterized by (i) similarity between past recollection and future imagination, (ii) facilitation of judgements related to the future as compared with the past, and (iii) facilitation of judgements related to time-points distant from the present. These effects were found with respect to faces and events, and also suggest that brain mechanisms of MT are independent of whether actual life episodes have to be re-experienced or pre-experienced, recruiting a common cerebral network including the anteromedial temporal, posterior parietal, inferior frontal, temporo-parietal and insular cortices. These behavioural and neural data suggest that self-projection in time is a fundamental aspect of MT, relying on neural structures encoding memory, mental imagery and self.

Potencial para o biocontrole de Botrytis cinerea por leveduras em sistema integrado de cultivo de lírio

O objetivo deste trabalho foi comparar uma população de leveduras do filoplano de lírio de um sistema convencional de cultivo com outra de sistema integrado, além de avaliar o antagonismo da levedura Sporidiobolus pararoseus a Botrytis cinerea. A comunidade de leveduras foi estimada pelo método da queda dos balistoporos nos terços inferior, médio e superior das plantas, bem como nas faces adaxial e abaxial das folhas. Nos discos de folhas de plantas do sistema integrado, foi alta a presença da população de leveduras, tendo sido maior na face adaxial das folhas do terço médio das plantas. Para avaliação do antagonismo, foram aplicadas aos discos de folhas as concentrações de 10(5), 10(6) e 10(7) células mL-1 da levedura, em três períodos de inoculação: 24 horas antes; simultânea a; e 24 horas após a inoculação de 10(4) esporos mL-1 de B. cinerea. A incidência, a percentagem de área de discos colonizados e a esporulação de B. cinerea foram avaliadas por meio de diagrama de notas, a partir do quarto dia após a inoculação. Todas as concentrações da levedura reduziram a esporulação de B. cinerea nos discos de folha, em comparação à testemunha, e a concentração de 10(7) esporos mL-1 foi a mais eficiente.

Face Short-Term Memory-Related Electroencephalographic Patterns can Differentiate Multi- versus Single-Domain Amnestic Mild Cognitive Impairment.

Amnestic mild cognitive impairment (aMCI) is characterized by memory deficits alone (single-domain, sd-aMCI) or associated with other cognitive disabilities (multi-domain, md-aMCI). The present study assessed the patterns of electroencephalographic (EEG) activity during the encoding and retrieval phases of short-term memory in these two aMCI subtypes, to identify potential functional differences according to the neuropsychological profile. Continuous EEG was recorded in 43 aMCI patients, whose 16 sd-aMCI and 27 md-aMCI, and 36 age-matched controls (EC) during delayed match-to-sample tasks for face and letter stimuli. At encoding, attended stimuli elicited parietal alpha (8-12 Hz) power decrease (desynchronization), whereas distracting stimuli were associated with alpha power increase (synchronization) over right central sites. No difference was observed in parietal alpha desynchronization among the three groups. For attended faces, the alpha synchronization underlying suppression of distracting letters was reduced in both aMCI subgroups, but more severely in md-aMCI cases that differed significantly from EC. At retrieval, the early N250r recognition effect was significantly reduced for faces in md-aMCI as compared to both sd-aMCI and EC. The results suggest a differential alteration of working memory cerebral processes for faces in the two aMCI subtypes, face covert recognition processes being specifically altered in md-aMCI.

Neural substrates of social emotion regulation: a FMRI study on imitation and expressive suppression to dynamic facial signals.

Emotion regulation is crucial for successfully engaging in social interactions. Yet, little is known about the neural mechanisms controlling behavioral responses to emotional expressions perceived in the face of other people, which constitute a key element of interpersonal communication. Here, we investigated brain systems involved in social emotion perception and regulation, using functional magnetic resonance imaging (fMRI) in 20 healthy participants. The latter saw dynamic facial expressions of either happiness or sadness, and were asked to either imitate the expression or to suppress any expression on their own face (in addition to a gender judgment control task). fMRI results revealed higher activity in regions associated with emotion (e.g., the insula), motor function (e.g., motor cortex), and theory of mind (e.g., [pre]cuneus) during imitation. Activity in dorsal cingulate cortex was also increased during imitation, possibly reflecting greater action monitoring or conflict with own feeling states. In addition, premotor regions were more strongly activated during both imitation and suppression, suggesting a recruitment of motor control for both the production and inhibition of emotion expressions. Expressive suppression (eSUP) produced increases in dorsolateral and lateral prefrontal cortex typically related to cognitive control. These results suggest that voluntary imitation and eSUP modulate brain responses to emotional signals perceived from faces, by up- and down-regulating activity in distributed subcortical and cortical networks that are particularly involved in emotion, action monitoring, and cognitive control.

Médecine interne et gériatrie en soins aigus: mariage de raison [General internal medicine and geriatrics in the acute care setting: opportunities for collaboration]

The health care system faces a difficult challenge as a result of the demographic evolution. The acute hospital is especially challenged by the steady increase of the elderly population. The collaboration between internal medicine and geriatrics in this setting could prove useful to facilitate the adaptation of the acute care setting and greatly enhance education of the health care professionals. Internists and geriatricians can benefit from each other skills and competencies to develop together new models of acute care that would better match the elderly population needs.

Apport de l'utltrasonographie dans la chirurgie d'épargne du rein et du testicule [Benefits of ultrasonography in kidney and testicular-sparing surgery].

Renal and testicular cancers account for 4% and 1% of all malignancies, respectively. Their prevalence has increased over the past years and is related to the widespread use of medical imaging and the incidental findings of small asymptomatic tumors on computed tomography scanners and ultrasounds examinations. The urologist faces the dilemma of overtreating benign asymptomatic lesions with radical surgery. Therefore, organ-sparing surgery was developed. Recent studies have shown that recurrence rates are often similar between organ-sparing and radical surgery for small kidney or testicular tumors. However, the risk of positive surgical margins consecutive to organ-sparing surgery remains a matter of debate. This article discusses the role of ex-vivo peroperative ultrasonography in predicting negative surgical margins during kidney- and testicular-sparing surgery.

Distribuição horizontal e vertical de fósforo em sistemas de cultivos exclusivos de soja e de integração lavoura-pecuária-floresta

O objetivo deste trabalho foi avaliar a distribuição horizontal e vertical do fósforo no solo e a produtividade de soja em sistemas de cultivos exclusivos e de integração lavoura-pecuária-floresta (ILPF). Foram avaliados os tratamentos: floresta plantada de eucalipto; lavoura de soja e milho safrinha consorciado com Urochloa brizantha 'Marandu'; pastagem de U. brizantha; sistema de ILPF; e duas áreas controle, com floresta nativa e pousio. O solo foi coletado nas camadas de 0-5, 5-10, 10-20 e 20-30 cm, para determinação das características químicas. As avaliações foram realizadas no segundo ano agrícola após a implantação do experimento. No sistema de ILPF, solo e produtividade foram avaliados em quatro transectos equidistantes, no centro do renque e a 3, 6, 10 e 15 m do renque, nas faces norte e sul. Os teores de P disponível (Mehlich-1) foram maiores nas camadas superficiais do solo, nos sistemas com soja/milho safrinha e com ILPF. No ILPF, os teores de P disponível não diferiram entre as distâncias do renque das árvores, e a produtividade de soja não diferiu da observada no sistema com soja/milho safrinha. Portanto, com dois anos de implantação, o sistema ILPF ainda não é capaz de interferir marcadamente nas características químicas do solo e na produtividade da soja.

Using tools to help cost estimating and pricing: examination of costing model's and cost breakdown's workability and their capability to cooperative work

Tämä diplomityö käsittelee työkaluja, jotka on suunniteltu kustannusten ennakointiin ja hinnan asetantaan. Aluksi on käyty läpi perinteisen ja toimintoperusteisen kustannuslaskennan perusteita. Näiden menetelmien välisiä eroja on tarkasteltu ja toimintoperusteisen kustannuslaskennan paremmin sopivuus nykypäivän yrityksille on perusteltu. Toisena käsitellään hinnoittelu. Hinnan merkitys, hinnoittelumenetelmät ja päätös lopullisesta hinnasta on käyty läpi. Hinnoittelun jälkeen esitellään kustannusjärjestelmät ja kustannusten arviointi. Nämä asiat todistavat, että tarkat kustannusarviot ovat elintärkeitä yritykselle. Tuotteen kustannusarviointi, hinnan asetanta ja tarjoaminen ovat erittäin merkityksellisiä asioita ottaen huomioon koko projektin elinkaaren ja tulevat tuotot. Nykyään on yleistä käyttää työkaluja kustannusarvioinnissa ja joskus myös hinnoittelussa. Työkalujen luotettavuus on tiedettävä, ennenkuin työkalut otetaan käyttöön. Myös työkalujen käyttäjät täytyy perehdyttää hyvin. Muuten yritys todennäköisesti kohtaa odottamattomia ja epämiellyttäviä yllätyksiä.

Quantitative morphometry analysis of the fetal brain using clinical MR imaging

In vivo fetal magnetic resonance imaging provides aunique approach for the study of early human braindevelopment [1]. In utero cerebral morphometry couldpotentially be used as a marker of the cerebralmaturation and help to distinguish between normal andabnormal development in ambiguous situations. However,this quantitative approach is a major challenge becauseof the movement of the fetus inside the amniotic cavity,the poor spatial resolution provided by very fast MRIsequences and the partial volume effect. Extensiveefforts are made to deal with the reconstruction ofhigh-resolution 3D fetal volumes based on severalacquisitions with lower resolution [2,3,4]. Frameworkswere developed for the segmentation of specific regionsof the fetal brain such as posterior fossa, brainstem orgerminal matrix [5,6], or for the entire brain tissue[7,8], applying the Expectation-Maximization MarkovRandom Field (EM-MRF) framework. However, many of theseprevious works focused on the young fetus (i.e. before 24weeks) and use anatomical atlas priors to segment thedifferent tissue or regions. As most of the gyraldevelopment takes place after the 24th week, acomprehensive and clinically meaningful study of thefetal brain should not dismiss the third trimester ofgestation. To cope with the rapidly changing appearanceof the developing brain, some authors proposed a dynamicatlas [8]. To our opinion, this approach however faces arisk of circularity: each brain will be analyzed /deformed using the template of its biological age,potentially biasing the effective developmental delay.Here, we expand our previous work [9] to proposepost-processing pipeline without prior that allow acomprehensive set of morphometric measurement devoted toclinical application. Data set & Methods: Prenatal MRimaging was performed with a 1-T system (GE MedicalSystems, Milwaukee) using single shot fast spin echo(ssFSE) sequences (TR 7000 ms, TE 180 ms, FOV 40 x 40 cm,slice thickness 5.4mm, in plane spatial resolution1.09mm). For each fetus, 6 axial volumes shifted by 1 mmwere acquired under motherâeuro?s sedation (about 1min pervolume). First, each volume is segmentedsemi-automatically using region-growing algorithms toextract fetal brain from surrounding maternal tissues.Inhomogeneity intensity correction [10] and linearintensity normalization are then performed. Brain tissues(CSF, GM and WM) are then segmented based on thelow-resolution volumes as presented in [9]. Ahigh-resolution image with isotropic voxel size of 1.09mm is created as proposed in [2] and using B-splines forthe scattered data interpolation [11]. Basal gangliasegmentation is performed using a levet setimplementation on the high-resolution volume [12]. Theresulting white matter image is then binarized and givenas an input in FreeSurfer software(http://surfer.nmr.mgh.harvard.edu) to providetopologically accurate three-dimensional reconstructionsof the fetal brain according to the local intensitygradient. References: [1] Guibaud, Prenatal Diagnosis29(4) (2009). [2] Rousseau, Acad. Rad. 13(9), 2006. [3]Jiang, IEEE TMI 2007. [4] Warfield IADB, MICCAI 2009. [5]Claude, IEEE Trans. Bio. Eng. 51(4) 2004. [6] Habas,MICCAI 2008. [7] Bertelsen, ISMRM 2009. [8] Habas,Neuroimage 53(2) 2010. [9] Bach Cuadra, IADB, MICCAI2009. [10] Styner, IEEE TMI 19(39 (2000). [11] Lee, IEEETrans. Visual. And Comp. Graph. 3(3), 1997. [12] BachCuadra, ISMRM 2010.

Developing of supplier network in shipbuilding industry

Työn tarkoituksena on selvittää minkälaisen verkoston Aker Yards Oy, kokonaistoimittajat ja kokonaistoimittajien alihankkijat muodostavat. Lisäksi arvioidaan verkostoriskit, joita Aker Yards Oy kohtaa toimiessaan verkostossa. Tutkimus suoritettiin tekemällä kysely verkostossa oleville kokonaistoimittajille sekä haastattelemalla kuutta henkilöä Aker Yards Oy:stä. Suhteita ja verkostoa analysoitiin tutkimalla verkoston yksittäisiä toimijoita sekä näiden välisiä suhteita. Riskejä analysoitiin tarkastelemalla niiden tunnistettuja syitä. Työn tuloksena on verkostokuva, joka piirrettiin kyselytulosten perusteella. Suhteiden ja verkoston analyysillä päädyttiin tehtäviin, joita Aker Yards Oy:n johdon tulisi toteuttaa, jotta verkostosta ja yksittäisistä toimittajista saataisiin irti mahdollisimman paljon. Lisäksi suhteita ja verkostoa käsiteltiin niiden tuloksellisen johtamisen näkökulmasta. Riskianalyysista saatiin tuloksena uhkaavimpien riskien arviointi.

Sisäisen viestinnän rooli uudistumiskyvyn johtamisessa. Case: ProAgria-yhtymä

Tutkielmassa selvitettiin sisäisen viestinnän roolia uudistumiskyvyn johtamisessa. Tulokseksi saatiin malli, jossa on uudella tavalla yhdistetty uudistumiskyky ja siihen vaikuttava sisäinen viestintä. Tutkielmaan haettiin empiiristä kosketuspintaa ProAgria-yhtymästä case-organisaationa. Tutkimusaineisto koostuu yhteensä 20 johtajan ja viestinnästä vastaavan haastattelusta. Kaaoksen, merkityksenluonnin, kulttuurin ja uskomusjärjestelmien mukaanotto tarkasteluun lisää ymmärrystä pohdittaessa ongelmia, joita tietojohtaminen kohtaa. Nämä edellytykset ja myös häiriötekijät nimettiin tutkielmassa suostutteluprosessiksi ja havahduttamisprosessiksi. Tutkielmassa osoitettiin myös areenoiden merkityssuostuttelu- ja havahduttamisprosessien edistäjänä.

Kansainvälinen markkinavalinta ohjelmistoalan mikroyrityksessä

Tutkielman tutkimusongelmana on, miten kansainvälinen kohdemarkkinoiden valinta pitäisi suorittaa ohjelmistoalan mikroyrityksessä. Tutkielma on kvalitatiivinen, yksittäinen tapaustutkimus. Teoriaosassa tutkimusongelmaa lähestytään tarkastelemalla kirjallisuutta, joka käsittelee kansainväliseen kohdemarkkinavalintaan vaikuttavia tekijöitä sekä olemassa olevia markkinavalintamalleja. Vanhojen mallien pohjalta kehitetään uusi käytännönläheinen ohjelmistoalan mikroyritykselle sopiva maavalintamalli. Kehitetty maavalintamalli koostuu eri vaiheista, joita ovat 1) sisäisten tekijöiden kartoittaminen, 2) alkukarsinta, 3) yrityksen kilpailukyvyn ja markkinoiden houkuttelevuuden mittaaminen matriisin avulla. Kehitettyä mallia sovelletaan tapausyritykseen tekemällä kansainvälinen markkinavalinta perustuen työpöytätutkimukseen, jossa käytetään Internetistä saatavaa sekundääridataa ja markkinatietoa. Työn lopussa esitetään markkinavalinnan tulokset ja toimenpidesuositukset yrityksen johdolle. Tutkimus osoittaa, että resurssipulasta huolimatta systemaattinen ja loogisesti etenevä maavalintaprosessi on mahdollista toteuttaa myös mikroyrityksessä. Ennalta määrätyt numeeriset rajat valintakriteereille mahdollistavat markkinoiden tarkastelun objektiivisuuden. Suurimpana haasteena ohjelmistoalan mikroyrityksen kansainvälisessä kohdemarkkinavalinnassa on yrityksen kilpailukyvyn mittaaminen eri markkinoilla. Tämäjohtuu osin ohjelmistoalan dynaamisesta luonteesta sekä kilpailija-analyysien subjektiivisuudesta.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Moral Hazard in Repeated Procurement of Services

This paper analyzes repeated procurement of services as a four-stage game divided into two periods. In each period there is (1) a contest stage à la Tullock in which the principal selects an agent and (2) a service stage in which the selected agent provides a service. Since this service effort is non-verifiable, the principal faces a moral hazard problem at the service stages. This work considers how the principal should design the period-two contest to mitigate the moral hazard problem in the period-one service stage and to maximize total service and contest efforts. It is shown that the principal must take account of the agent's past service effort in the period-two contest success function. The results indicate that the optimal way to introduce this `bias' is to choose a certain degree of complementarity between past service and current contest efforts. This result shows that contests with `additive bias' (`multiplicative bias') are optimal in incentive problems when effort cost is low (high). Furthermore, it is shown that the severity of the moral hazard problem increases with the cost of service effort (compared to the cost of contest effort) and the number of agents. Finally, the results are extended to more general contest success functions. JEL classification: C72; D82 Key words: Biased contests; Moral Hazard; Repeated Game; Incentives.