Risk Factor Analysis of Late Survival After Heart Transplantation According to Donor Profile: A Multi-Institutional Retrospective Study of 512 Transplants

Introduction. Patients with terminal heart failure have increased more than the available organs leading to a high mortality rate on the waiting list. Use of Marginal and expanded criteria donors has increased due to the heart shortage. Objective. We analyzed all heart transplantations (HTx) in Sao Paulo state over 8 years for donor profile and recipient risk factors. Method. This multi-institutional review collected HTx data from all institutions in the state of Sao Paulo, Brazil. From 2002 to 2008 (6 years), only 512 (28.8%) of 1777 available heart donors were accepted for transplantation. All medical records were analyzed retrospectively; none of the used donors was excluded, even those considered to be nonstandard. Results. The hospital mortality rate was 27.9% (n = 143) and the average follow-up time was 29.4 +/- 28.4 months. The survival rate was 55.5% (n = 285) at 6 years after HTx. Univariate analysis showed the following factors to impact survival: age (P = .0004), arterial hypertension (P = .4620), norepinephrine (P = .0450), cardiac arrest (P = .8500), diabetes mellitus (P = .5120), infection (P = .1470), CKMB (creatine kinase MB) (P = .8694), creatinine (P = .7225), and Na+ (P = .3273). On multivariate analysis, only age showed significance; logistic regression showed a significant cut-off at 40 years: organs from donors older than 40 years showed a lower late survival rates (P = .0032). Conclusions. Donor age older than 40 years represents an important risk factor for survival after HTx. Neither donor gender nor norepinephrine use negatively affected early survival.

Flexible and conservative features of social systems in tufted capuchin monkeys: comparing the socioecology of Sapajus libidinosus and Sapajus nigritus

Socioecological models assume that primates adapt their social behavior to ecological conditions, and predict that food availability and distribution, predation risk and risk of infanticide by males affect patterns of social organization, social structure and mating system of primates. However, adaptability and variation of social behavior may be constrained by conservative adaptations and by phylogenetic inertia. The comparative study of closely related species can help to identify the relative contribution of ecological and of genetic determinants to primate social systems. We compared ecological features and social behavior of two species of the genus Sapajus, S. nigritus in Carlos Botelho State Park, an area of Atlantic Forest in Sao Paulo state, and S. libidinosus in Fazenda Boa Vista, a semi-arid habitat in Piaui state, Brazil. S. libidinosus perceived higher predation risk and fed on clumped, high quality, and usurpable resources (fruits) all year round, whereas S. nigritus perceived lower predation risk and relied on evenly distributed, low-quality food sources (leaves) during periods of fruit shortage. As predicted by socioecology models, S. libidinosus females were philopatric and established linear and stable dominance hierarchies, coalitions, and grooming relationships. S. nigritus females competed less often, and could transfer between groups, which might explain the lack of coalitions and grooming bonds among them. Both populations presented similar group size and composition and the same polygynous mating system. The species differed from each other in accordance with differences in the characteristics of their main food sources, as predicted by socioecological models, suggesting that phylogenetic inertia does not constrain social relationships established among female Sapajus. The similarity in mating systems indicates that this element of the social system is not affected by ecological variables and thus, is a more conservative behavioral feature of the genus Sapajus. Am. J. Primatol. 74:315331, 2012. (c) 2011 Wiley Periodicals, Inc.

Challenges for Brazilian MNCs' international human resources management

Multinationals from emerging countries such as Brazil now take the path of internationalisation where early movers have already been. However, these companies have to develop new tools to deal with their own challenges, since they come from countries with different historical backgrounds and specificities. This paper explores challenges for Brazilian MNCs in terms of HRM when operating abroad. It presents the results of six cases of Brazilian MNCs through a grounded theory study. Results show these companies had to deal with their former economic turbulence, shortage of qualified workforce to work internationally and the need to develop HRM competencies to operate globally.

Simultaneous use of urea and potassium nitrate for Arthrospira (Spirulina) platensis cultivation

Urea has been considered as a promising alternative nitrogen source for the cultivation of Arthrospira platensis if it is possible to avoid ammonia toxicity; however, this procedure can lead to periods of nitrogen shortage. This study shows that the addition of potassium nitrate, which acts as a nitrogen reservoir, to cultivations carried out with urea in a fed-batch process can increase the maximum cell concentration (Xm) and also cell productivity (PX). Using response surface methodology, the model indicates that the estimated optimum Xm can be achieved with 17.3 mM potassium nitrate and 8.9 mM urea. Under this condition an Xm of 6077 +/- 199 mg/L and a PX of 341.5 +/- 19.1 mg L1day1 were obtained.

Transient transfection of serum-free suspension HEK 293 cell culture for efficient production of human rFVIII

Abstract Background Hemophilia A is a bleeding disorder caused by deficiency in coagulation factor VIII. Recombinant factor VIII (rFVIII) is an alternative to plasma-derived FVIII for the treatment of hemophilia A. However, commercial manufacturing of rFVIII products is inefficient and costly and is associated to high prices and product shortage, even in economically privileged countries. This situation may be solved by adopting more efficient production methods. Here, we evaluated the potential of transient transfection in producing rFVIII in serum-free suspension HEK 293 cell cultures and investigated the effects of different DNA concentration (0.4, 0.6 and 0.8 μg/106 cells) and repeated transfections done at 34° and 37°C. Results We observed a decrease in cell growth when high DNA concentrations were used, but no significant differences in transfection efficiency and in the biological activity of the rFVIII were noticed. The best condition for rFVIII production was obtained with repeated transfections at 34°C using 0.4 μg DNA/106 cells through which almost 50 IU of active rFVIII was produced six days post-transfection. Conclusion Serum-free suspension transient transfection is thus a viable option for high-yield-rFVIII production. Work is in progress to further optimize the process and validate its scalability.

The immunomodulatory role of carbon monoxide during transplantation

The number of organ and tissue transplants has increased worldwide in recent decades. However, graft rejection, infections due to the use of immunosuppressive drugs and a shortage of graft donors remain major concerns. Carbon monoxide (CO) had long been regarded solely as a poisonous gas. Ultimately, physiological studies unveiled the endogenous production of CO, particularly by the heme oxygenase (HO)-1 enzyme, recognizing CO as a beneficial gas when used at therapeutic doses. The protective properties of CO led researchers to develop uses for it, resulting in devices and molecules that can deliver CO in vitro and in vivo. The resulting interest in clinical investigations was immediate. Studies regarding the CO/HO-1 modulation of immune responses and their effects on various immune disorders gave rise to transplantation research, where CO was shown to be essential in the protection against organ rejection in animal models. This review provides a perspective of how CO modulates the immune system to improve transplantation and suggests its use as a therapy in the field.

The star formation rate in the inner Milky Way Galaxy

The present star formation rate (SFR) in the inner Galaxy is puzzling for the chemical evolution models (CEM). No static CEM is able to reproduce the peak of the SFR in the 4 kpc ring. The main reason is probably a shortage of gas, which could be due to the dynamical effects produced by the galactic bar, not considered by these models. We developed a CEM that includes radial gas flows in order to mimic the effects of the galactic bar in the first 5 kpc of the galactic disk. In this model, the star formation (SF) is a two-step process: first, the diffuse gas forms molecular clouds. Then, stars form from cloud-cloud collisions or by the interaction between massive stars and the molecular gas. The former is called spontaneous and the latter induced SF. The mass in the different phases of each region changes by the processes associated with the stellar formation and death by: the SF due to spontaneous fragmentation of gas in the halo; formation of gas clouds in the disk from the diffuse gas; induced SF in the disk due to the interaction between massive stars and gas clouds; and finally, the restitution of the diffuse gas associated to these process of cloud and star formation. In the halo, the star formation rate for the diffuse gas follows a Schmidt law with a power n = 1.5. In the disk, the stars form in two steps: first, molecular clouds are formed from the diffuse gas also following a Schmidt law with n=1.5 and a proportionality factor. Including a specific pattern of radial gas flows, the CEM is able to reproduce with success the peak in the SFR at 4 kpc (fig. 1).

Forecasting the need for medical specialists in Spain: application of a system dynamics model

[EN] Background: Spain has gone from a surplus to a shortage of medical doctors in very few years. Medium and long-term planning for health professionals has become a high priority for health authorities. Methods: We created a supply and demand/need simulation model for 43 medical specialties using system dynamics. The model includes demographic, education and labour market variables. Several scenarios were defined. Variables controllable by health planners can be set as parameters to simulate different scenarios. The model calculates the supply and the deficit or surplus. Experts set the ratio of specialists needed per 1000 inhabitants with a Delphi method. Results: In the scenario of the baseline model with moderate population growth, the deficit of medical specialists will grow from 2% at present (2800 specialists) to 14.3% in 2025 (almost 21 000). The specialties with the greatest medium-term shortages are Anesthesiology, Orthopedic and Traumatic Surgery, Pediatric Surgery, Plastic Aesthetic and Reparatory Surgery, Family and Community Medicine, Pediatrics, Radiology, and Urology. Conclusions: The model suggests the need to increase the number of students admitted to medical school. Training itineraries should be redesigned to facilitate mobility among specialties. In the meantime, the need to make more flexible the supply in the short term is being filled by the immigration of physicians from new members of the European Union and from Latin America.

¿Donde reutilizar y qué regar?: uso de un sig para el diseño de una red de reutilización en una isla volcánica

[ES] El conocimiento de criterios que ayuden a priorizar el uso del agua es fundamental para garantizar su uso sostenible. En las zonas semiáridas, el abandono de la actividad agrícola puede estar motivado por la escasez de agua y por problemas de mercado de las especies tradicionalmente cultivadas. Por otro lado, la actividad ganadera, suele estar limitada por la escasez de forrajes. La disponibilidad de agua regenerada a un precio razonable podría evitar su vertido y contrarrestar la degradación de suelos abandonados, potenciando la producción de especies forrajeras rentables, contribuyendo así a la ganadería sostenible. Para ello se requiere optimizar la distribución del agua considerando varios criterios simultáneamente

Charakterisierung der Vinorin-Synthase aus Rauvolfia serpentina durch Reinigung, Expression, Mutation und Kristallisation

ABSTRACTDie vorliegende Arbeit befasste sich mit der Reinigung,heterologen Expression, Charakterisierung, molekularenAnalyse, Mutation und Kristallisation des EnzymsVinorin-Synthase. Das Enzym spielt eine wichtige Rolle inder Ajmalin-Biosynthese, da es in einerAcetyl-CoA-abhängigen Reaktion die Umwandlung desSarpagan-Alkaloids 16-epi-Vellosimin zu Vinorin unterBildung des Ajmalan-Grundgerüstes katalysiert. Nach der Reinigung der Vinorin-Synthase ausHybrid-Zellkulturen von Rauvolfia serpentina/Rhazya strictamit den fünf chromatographischen TrennmethodenAnionenaustauschchromatographie an SOURCE 30Q, HydrophobeInteraktionen Chromatographie an SOURCE 15PHE,Chromatographie an MacroPrep Ceramic Hydroxyapatit,Anionenaustauschchromatographie an Mono Q undGrößenausschlußchromatographie an Superdex 75 konnte dieVinorin-Synthase aus 2 kg Zellkulturgewebe 991fachangereichert werden.Das nach der Reinigung angefertigte SDS-Gel ermöglichte eineklare Zuordnung der Protein-Bande als Vinorin-Synthase.Der Verdau der Enzymbande mit der Endoproteinase LysC unddie darauffolgende Sequenzierung der Spaltpeptide führte zuvier Peptidsequenzen. Der Datenbankvergleich (SwissProt)zeigte keinerlei Homologien zu Sequenzen bekannterPflanzenenzyme. Mit degenerierten Primern, abgeleitet voneinem der erhaltenen Peptidfragmente und einer konserviertenRegion bekannter Acetyltransferasen gelang es, ein erstescDNA-Fragment der Vinorin-Synthase zu amplifizieren. Mit derMethode der RACE-PCR wurde die Nukleoidsequenzvervollständigt, was zu einem cDNA-Vollängenklon mit einerGröße von 1263 bp führte, der für ein Protein mit 421Aminosäuren (46 kDa) codiert.Das Vinorin-Synthase-Gen wurde in den pQE2-Expressionsvektorligiert, der für einen N-terminalen 6-fachen His-tagcodiert. Anschließend wurde sie erstmals erfolgreich in E.coli im mg-Maßstab exprimiert und bis zur Homogenitätgereinigt. Durch die erfolgreiche Überexpression konnte dieVinorin-Synthase eingehend charakterisiert werden. DerKM-Wert für das Substrat Gardneral wurde mit 20 µM, bzw.41.2 µM bestimmt und Vmax betrug 1 pkat, bzw. 1.71 pkat.Nach erfolgreicher Abspaltung des His-tags wurden diekinetischen Parameter erneut bestimmt (KM- Wert 7.5 µM, bzw.27.52 µM, Vmax 0.7 pkat, bzw. 1.21 pkat). Das Co-Substratzeigt einen KM- Wert von 60.5 µM (Vmax 0.6 pkat). DieVinorin-Synthase besitzt ein Temperatur-Optimum von 35 °Cund ein pH-Optimum bei 7.8.Homologievergleiche mit anderen Enzymen zeigten, dass dieVinorin-Synthase zu einer noch kleinen Familie von bisher 10Acetyltransferasen gehört. Alle Enzyme der Familie haben einHxxxD und ein DFGWG-Motiv zu 100 % konserviert. Basierendauf diesen Homologievergleichen und Inhibitorstudien wurden11 in dieser Proteinfamilie konservierte Aminosäuren gegenAlanin ausgetauscht, um so die Aminosäuren einer in derLiteratur postulierten katalytischen Triade(Ser/Cys-His-Asp) zu identifizieren.Die Mutation aller vorhandenen konservierten Serine undCysteine resultierte in keiner Mutante, die zumvollständigen Aktivitätsverlust des Enzyms führte. Nur dieMutationen H160A und D164A resultierten in einemvollständigen Aktivitätsverlust des Enzyms. Dieses Ergebniswiderlegt die Theorie einer katalytischen Triade und zeigte,dass die Aminosäuren H160A und D164A exklusiv an derkatalytischen Reaktion beteiligt sind.Zur Überprüfung dieser Ergebnisse und zur vollständigenAufklärung des Reaktionsmechanismus wurde dieVinorin-Synthase kristallisiert. Die bis jetzt erhaltenenKristalle (Kristallgröße in µm x: 150, y: 200, z: 200)gehören der Raumgruppe P212121 (orthorhombisch primitiv) anund beugen bis 3.3 Å. Da es bis jetzt keine Kristallstruktureines zur Vinorin-Synthase homologen Proteins gibt, konntedie Struktur noch nicht vollständig aufgeklärt werden. ZurLösung des Phasenproblems wird mit der Methode der multiplenanomalen Dispersion (MAD) jetzt versucht, die ersteKristallstruktur in dieser Enzymfamilie aufzuklären.

Le strategie di internazionalizzazione delle imprese distrettuali: un'analisi comparata di tre diversi sistemi locali di produzione in Emilia Romagna

Since the Nineties, the process of globalization has caused a sharp increase in the real and financial integration of the worldwide economy, reducing the obstacles to international trade and minimizing the cost of transaction. The entrance of foreign firms in the domestic market has deeply modified the competitive situation of Italian enterprises, which have been forced to change their strategies in order to cope with those of the new competitors. In this scenario, internationalization is no longer one of the different strategic options available for the firm, but it becomes a forced choice to maintain or acquire a competitive advantage sustainable over time. Internationalization strategies of SMEs, however, are hindered by the shortage of financial resources and entrepreneurial skills, therefore this kind of firms tends toward light forms of foreign expansion, like export and subcontracting. Despite this, many studies have demonstrated that the district localisation increases the firms’ productivity and innovative capacity, so their competiveness both at a domestic and international level. The majority of these empirical contributions has focused mainly on the analysis of commercial flows, confirming that district enterprises reach a superior international performance compared to their external competitors. On the contrary, only few works have tried to evaluate the existence of a district effect on the firms’ ability to invest abroad, but the obtained results are not straightforward. One of the reason of these conclusions is that the phenomena has been analysed without taking into account the differences existing between districts in terms of enterprises’ dimension, diffusion of industrial groups and, above all, the sector of productive specialization, because the technological content of production could improve the innovativeness of district firms, allowing them to adopt advanced forms of internationalisation as foreign direct investments (FDI). The aim of the thesis is to further investigate the district effect on internationalisation, trough an econometric analysis of the international strategies carried out by firms localised in three different local system of production characterised by different technological specialization.

Different addictive drug exposure induces selective alterations of the Endogenous Opioid System : modulation of transcription and epigenetic mechanisms

Drug addiction manifests clinically as compulsive drug seeking, and cravings that can persist and recur even after extended periods of abstinence. The fundamental principle that unites addictive drugs is that each one enhances synaptic DA by means that dissociate it from normal behavioral control, so that they act to reinforce their own acquisition. Our attention has focused on the study of phenomena associated with the consumption of alcohol and heroin. Alcohol has long been considered an unspecific pharmacological agent, recent molecular pharmacology studies have shown that acts on different primary targets. Through gene expression studies conducted recently it has been shown that the classical opioid receptors are differently involved in the consumption of ethanol and, furthermore, the system nociceptin / NOP, included in the family of endogenous opioid system, and both appear able to play a key role in the initiation of alcohol use in rodents. What emerges is that manipulation of the opioid system, nociceptin, may be useful in the treatment of addictions and there are several evidences that support the use of this strategy. The linkage between gene expression alterations and epigenetic modulation in PDYN and PNOC promoters following alcohol treatment confirm the possible chromatin remodeling mechanism already proposed for alcoholism. In the second part of present study, we also investigated alterations in signaling molecules directly associated with MAPK pathway in a unique collection of postmortem brains from heroin abusers. The interest was focused on understanding the effects that prolonged exposure of heroin can cause in an individual, over the entire MAPK cascade and consequently on the transcription factor ELK1, which is regulated by this pathway. We have shown that the activation of ERK1/2 resulting in Elk-1 phosphorylation in striatal neurons supporting the hypothesis that prolonged exposure to substance abuse causes a dysregulation of MAPK pathway.

Soil biogenic emissions of nitric oxide from arid and semi-arid ecosystems

The biogenic production of NO in the soil accounts for between 10% and 40% of the global total. A large degree of the uncertainty in the estimation of the biogenic emissions stems from a shortage of measurements in arid regions, which comprise 40% of the earth’s land surface area. This study examined the emission of NO from three ecosystems in southern Africa which cover an aridity gradient from semi-arid savannas in South Africa to the hyper-arid Namib Desert in Namibia. A laboratory method was used to determine the release of NO as a function of the soil moisture and the soil temperature. Various methods were used to up-scale the net potential NO emissions determined in the laboratory to the vegetation patch, landscape or regional level. The importance of landscape, vegetation and climatic characteristics is emphasized. The first study occurred in a semi-arid savanna region in South Africa, where soils were sampled from 4 landscape positions in the Kruger National Park. The maximum NO emission occurred at soil moisture contents of 10%-20% water filled pore space (WFPS). The highest net potential NO emissions came from the low lying landscape positions, which have the largest nitrogen (N) stocks and the largest input of N. Net potential NO fluxes obtained in the laboratory were converted in field fluxes for the period 2003-2005, for the four landscape positions, using soil moisture and temperature data obtained in situ at the Kruger National Park Flux Tower Site. The NO emissions ranged from 1.5-8.5 kg ha-1 a-1. The field fluxes were up-scaled to a regional basis using geographic information system (GIS) based techniques, this indicated that the highest NO emissions occurred from the Midslope positions due to their large geographical extent in the research area. Total emissions ranged from 20x103 kg in 2004 to 34x103 kg in 2003 for the 56000 ha Skukuza land type. The second study occurred in an arid savanna ecosystem in the Kalahari, Botswana. In this study I collected soils from four differing vegetation patch types including: Pan, Annual Grassland, Perennial Grassland and Bush Encroached patches. The maximum net potential NO fluxes ranged from 0.27 ng m-2 s-1 in the Pan patches to 2.95 ng m-2 s-1 in the Perennial Grassland patches. The net potential NO emissions were up-scaled for the year December 2005-November 2006. This was done using 1) the net potential NO emissions determined in the laboratory, 2) the vegetation patch distribution obtained from LANDSAT NDVI measurements 3) estimated soil moisture contents obtained from ENVISAT ASAR measurements and 4) soil surface temperature measurements using MODIS 8 day land surface temperature measurements. This up-scaling procedure gave NO fluxes which ranged from 1.8 g ha-1 month-1 in the winter months (June and July) to 323 g ha-1 month-1 in the summer months (January-March). Differences occurred between the vegetation patches where the highest NO fluxes occurred in the Perennial Grassland patches and the lowest in the Pan patches. Over the course of the year the mean up-scaled NO emission for the studied region was 0.54 kg ha-1 a-1 and accounts for a loss of approximately 7.4% of the estimated N input to the region. The third study occurred in the hyper-arid Namib Desert in Namibia. Soils were sampled from three ecosystems; Dunes, Gravel Plains and the Riparian zone of the Kuiseb River. The net potential NO flux measured in the laboratory was used to estimate the NO flux for the Namib Desert for 2006 using modelled soil moisture and temperature data from the European Centre for Medium Range Weather Forecasts (ECMWF) operational model on a 36km x 35km spatial resolution. The maximum net potential NO production occurred at low soil moisture contents (<10%WFPS) and the optimal temperature was 25°C in the Dune and Riparian ecosystems and 35°C in the Gravel Plain Ecosystems. The maximum net potential NO fluxes ranged from 3.0 ng m-2 s-1 in the Riparian ecosystem to 6.2 ng m-2 s-1 in the Gravel Plains ecosystem. Up-scaling the net potential NO flux gave NO fluxes of up to 0.062 kg ha-1 a-1 in the Dune ecosystem and 0.544 kg h-1 a-1 in the Gravel Plain ecosystem. From these studies it is shown that NO is emitted ubiquitously from terrestrial ecosystems, as such the NO emission potential from deserts and scrublands should be taken into account in the global NO models. The emission of NO is influenced by various factors such as landscape, vegetation and climate. This study looks at the potential emissions from certain arid and semi-arid environments in southern Africa and other parts of the world and discusses some of the important factors controlling the emission of NO from the soil.

Mechanical behavior of flat and curved laminates interleaved by electrospun nanofibers

A major weakness of composite materials is that low-velocity impact, introduced accidentally during manufacture, operation or maintenance of the aircraft, may result in delaminations between the plies. Therefore, the first part of this study is focused on mechanics of curved laminates under impact. For this aim, the effect of preloading on impact response of curved composite laminates is considered. By applying the preload, the stress through the thickness and curvature of the laminates increased. The results showed that all impact parameters are varied significantly. For understanding the contribution rate of preloading and pre-stress on the obtained results another test is designed. The interesting phenomenon is that the preloading can decrease the damaged area when the curvature of the both specimens is the same. Finally the effect of curvature type, concave and convex, is investigated under impact loading. In the second part, a new composition of nanofibrous mats are developed to improve the efficiency of curved laminates under impact loading. Therefore, at first some fracture tests are conducted to consider the effect of Nylon 6,6, PCL, and their mixture on mode I and mode II fracture toughness. For this goal, nanofibers are electrospun and interleaved between mid-plane of laminate composite to conduct mode I and mode II tests. The results shows that efficiency of Nylon 6,6 is better than PCL in mode II, while the effect of PCL on fracture toughness of mode I is more. By mixing these nanofibers the shortage of the individual nanofibers is compensated and so the Nylon 6,6/PCL nanofibers could increased mode I and II fracture toughness. Then all these nanofibers are used between all layers of composite layers to investigate their effect on damaged area. The results showed that PCL could decrease the damaged area about 25% and Nylon 6,6 and mixed nanofibers about 50%.

Sustainable improvement of water networks : to achieve best decisions for rehabilitation plans using advanced GIS and statistical techniques

Many of developing countries are facing crisis in water management due to increasing of population, water scarcity, water contaminations and effects of world economic crisis. Water distribution systems in developing countries are facing many challenges of efficient repair and rehabilitation since the information of water network is very limited, which makes the rehabilitation assessment plans very difficult. Sufficient information with high technology in developed countries makes the assessment for rehabilitation easy. Developing countries have many difficulties to assess the water network causing system failure, deterioration of mains and bad water quality in the network due to pipe corrosion and deterioration. The limited information brought into focus the urgent need to develop economical assessment for rehabilitation of water distribution systems adapted to water utilities. Gaza Strip is subject to a first case study, suffering from severe shortage in the water supply and environmental problems and contamination of underground water resources. This research focuses on improvement of water supply network to reduce the water losses in water network based on limited database using techniques of ArcGIS and commercial water network software (WaterCAD). A new approach for rehabilitation water pipes has been presented in Gaza city case study. Integrated rehabilitation assessment model has been developed for rehabilitation water pipes including three components; hydraulic assessment model, Physical assessment model and Structural assessment model. WaterCAD model has been developed with integrated in ArcGIS to produce the hydraulic assessment model for water network. The model have been designed based on pipe condition assessment with 100 score points as a maximum points for pipe condition. As results from this model, we can indicate that 40% of water pipeline have score points less than 50 points and about 10% of total pipes length have less than 30 score points. By using this model, the rehabilitation plans for each region in Gaza city can be achieved based on available budget and condition of pipes. The second case study is Kuala Lumpur Case from semi-developed countries, which has been used to develop an approach to improve the water network under crucial conditions using, advanced statistical and GIS techniques. Kuala Lumpur (KL) has water losses about 40% and high failure rate, which make severe problem. This case can represent cases in South Asia countries. Kuala Lumpur faced big challenges to reduce the water losses in water network during last 5 years. One of these challenges is high deterioration of asbestos cement (AC) pipes. They need to replace more than 6500 km of AC pipes, which need a huge budget to be achieved. Asbestos cement is subject to deterioration due to various chemical processes that either leach out the cement material or penetrate the concrete to form products that weaken the cement matrix. This case presents an approach for geo-statistical model for modelling pipe failures in a water distribution network. Database of Syabas Company (Kuala Lumpur water company) has been used in developing the model. The statistical models have been calibrated, verified and used to predict failures for both networks and individual pipes. The mathematical formulation developed for failure frequency in Kuala Lumpur was based on different pipeline characteristics, reflecting several factors such as pipe diameter, length, pressure and failure history. Generalized linear model have been applied to predict pipe failures based on District Meter Zone (DMZ) and individual pipe levels. Based on Kuala Lumpur case study, several outputs and implications have been achieved. Correlations between spatial and temporal intervals of pipe failures also have been done using ArcGIS software. Water Pipe Assessment Model (WPAM) has been developed using the analysis of historical pipe failure in Kuala Lumpur which prioritizing the pipe rehabilitation candidates based on ranking system. Frankfurt Water Network in Germany is the third main case study. This case makes an overview for Survival analysis and neural network methods used in water network. Rehabilitation strategies of water pipes have been developed for Frankfurt water network in cooperation with Mainova (Frankfurt Water Company). This thesis also presents a methodology of technical condition assessment of plastic pipes based on simple analysis. This thesis aims to make contribution to improve the prediction of pipe failures in water networks using Geographic Information System (GIS) and Decision Support System (DSS). The output from the technical condition assessment model can be used to estimate future budget needs for rehabilitation and to define pipes with high priority for replacement based on poor condition. rn