Mechanical behavior of flat and curved laminates interleaved by electrospun nanofibers


Autoria(s): Saghafi, Hamed
Contribuinte(s)

Minak, Giangiacomo

Data(s)

23/05/2014

Resumo

A major weakness of composite materials is that low-velocity impact, introduced accidentally during manufacture, operation or maintenance of the aircraft, may result in delaminations between the plies. Therefore, the first part of this study is focused on mechanics of curved laminates under impact. For this aim, the effect of preloading on impact response of curved composite laminates is considered. By applying the preload, the stress through the thickness and curvature of the laminates increased. The results showed that all impact parameters are varied significantly. For understanding the contribution rate of preloading and pre-stress on the obtained results another test is designed. The interesting phenomenon is that the preloading can decrease the damaged area when the curvature of the both specimens is the same. Finally the effect of curvature type, concave and convex, is investigated under impact loading. In the second part, a new composition of nanofibrous mats are developed to improve the efficiency of curved laminates under impact loading. Therefore, at first some fracture tests are conducted to consider the effect of Nylon 6,6, PCL, and their mixture on mode I and mode II fracture toughness. For this goal, nanofibers are electrospun and interleaved between mid-plane of laminate composite to conduct mode I and mode II tests. The results shows that efficiency of Nylon 6,6 is better than PCL in mode II, while the effect of PCL on fracture toughness of mode I is more. By mixing these nanofibers the shortage of the individual nanofibers is compensated and so the Nylon 6,6/PCL nanofibers could increased mode I and II fracture toughness. Then all these nanofibers are used between all layers of composite layers to investigate their effect on damaged area. The results showed that PCL could decrease the damaged area about 25% and Nylon 6,6 and mixed nanofibers about 50%.

Formato

application/pdf

Identificador

http://amsdottorato.unibo.it/6598/1/Final_Thesis-revised.pdf

urn:nbn:it:unibo-13186

Saghafi, Hamed (2014) Mechanical behavior of flat and curved laminates interleaved by electrospun nanofibers , [Dissertation thesis], Alma Mater Studiorum Università di Bologna. Dottorato di ricerca in Meccanica e scienze avanzate dell'ingegneria <http://amsdottorato.unibo.it/view/dottorati/DOT514/>, 26 Ciclo. DOI 10.6092/unibo/amsdottorato/6598.

Idioma(s)

en

Publicador

Alma Mater Studiorum - Università di Bologna

Relação

http://amsdottorato.unibo.it/6598/

Direitos

info:eu-repo/semantics/openAccess

Palavras-Chave #ING-IND/14 Progettazione meccanica e costruzione di macchine
Tipo

Tesi di dottorato

NonPeerReviewed