Multiscale study on hydrogen mobility in metallic fusion divertor material

For achieving efficient fusion energy production, the plasma-facing wall materials of the fusion reactor should ensure long time operation. In the next step fusion device, ITER, the first wall region facing the highest heat and particle load, i.e. the divertor area, will mainly consist of tiles based on tungsten. During the reactor operation, the tungsten material is slowly but inevitably saturated with tritium. Tritium is the relatively short-lived hydrogen isotope used in the fusion reaction. The amount of tritium retained in the wall materials should be minimized and its recycling back to the plasma must be unrestrained, otherwise it cannot be used for fueling the plasma. A very expensive and thus economically not viable solution is to replace the first walls quite often. A better solution is to heat the walls to temperatures where tritium is released. Unfortunately, the exact mechanisms of hydrogen release in tungsten are not known. In this thesis both experimental and computational methods have been used for studying the release and retention of hydrogen in tungsten. The experimental work consists of hydrogen implantations into pure polycrystalline tungsten, the determination of the hydrogen concentrations using ion beam analyses (IBA) and monitoring the out-diffused hydrogen gas with thermodesorption spectrometry (TDS) as the tungsten samples are heated at elevated temperatures. Combining IBA methods with TDS, the retained amount of hydrogen is obtained as well as the temperatures needed for the hydrogen release. With computational methods the hydrogen-defect interactions and implantation-induced irradiation damage can be examined at the atomic level. The method of multiscale modelling combines the results obtained from computational methodologies applicable at different length and time scales. Electron density functional theory calculations were used for determining the energetics of the elementary processes of hydrogen in tungsten, such as diffusivity and trapping to vacancies and surfaces. Results from the energetics of pure tungsten defects were used in the development of an classical bond-order potential for describing the tungsten defects to be used in molecular dynamics simulations. The developed potential was utilized in determination of the defect clustering and annihilation properties. These results were further employed in binary collision and rate theory calculations to determine the evolution of large defect clusters that trap hydrogen in the course of implantation. The computational results for the defect and trapped hydrogen concentrations were successfully compared with the experimental results. With the aforedescribed multiscale analysis the experimental results within this thesis and found in the literature were explained both quantitatively and qualitatively.

Characterisation of head-hardened rail steel in terms of cyclic plasticity response and microstructure for improved material modelling

Stress- and strain-controlled tests of heat treated high-strength rail steel (Australian Standard AS1085.1) have been performed in order to improve the characterisation of the said material׳s ratcheting and fatigue wear behaviour. The hardness of the rail head material has also been studied and it has been found that hardness reduces considerably below four-millimetres from the rail top surface. Historically, researchers have used test coupons with circular cross-sections to conduct cyclic load tests. Such test coupons, typically five-millimetres in gauge diameter and ten‐millimetres in grip diameter, are usually taken from the rail head sample. When there is considerable variation of material properties over the cross-section it becomes likely that localised properties of the rail material will be missed. In another case from the literature, disks 47 mm in diameter for a twin-disk rolling contact test machine were obtained directly from the rail sample and used to validate ratcheting and rolling contact fatigue wear models. The question arises: How accurate are such tests, especially when large material property gradients exist? In this research paper, the effects of rail sampling location on the ratcheting behaviour of AS1085.1 rail steel were investigated using rectangular-shaped specimens obtained at four different depths to observe their respective cyclic plasticity behaviour. The microstructural features of the test coupons were also analysed, especially the pearlite inter-lamellar spacing which showed strong correlation with both hardness and cyclic plasticity behaviour of the material. This work ultimately provides new data and testing methodology to aid the selection of valid parameters for material constitutive models to better understand rail surface ratcheting and wear.

Pelon ja toivon välissä : Pätkätyöläisen urakerronta

This study analyzes the forming of the occupational identity of the well-educated fixed-term employees. Fixed-term employment contracts amongst the well-educated labour force are exceptionally common in Finland as compared to other European countries. Two groups of modern fixed-term employees are distinguished. The first comprises well-educated women employed in the public sector whose fixed-term employment often consists of successive periods as temporary substitutes. The other group comprises well-educated, upper white-collar men aged over 40, whose fixed-term employment careers often consist of jobs of project nature or posts that are filled for a fixed period only. Method of the study For the empirical data I interviewed 35 persons (26 women and 9 men) in 33 interviews, one of which was conducted by e-mail and one was a group interview. All the interviews were electronically recorded and coded. All the interviewees have two things in common: fixed-term employment and formal high education. Thirteen (13) of them are researchers, four nurses, four midwives, four journalists, and ten project experts. I used the snowball method to get in touch the interviewees. The first interviewees were those who were recommended by the trade unions and by my personal acquaintances. These interviewees, in turn, recommended other potential interviewees. In addition, announcements on the internet pages of the trade unions were used to reach other interviewees. In analysing process I read the research material several times to find the turning points in the narrative the interviewees told. I also searched for the most meaningful stories told and the meaning the interviewees gave to these stories and to the whole narrative. In addition to that I paid attention to co-production of the narrative with the interviewees and analyzed the narrative as performance to be able to search for the preferred identities the interviewees perform. (Riesman 2001, 698-701). I do not pay much attention to the question of truth of a narrative in the sense of its correspondence with facts; rather I think a working life narrative has two tasks: On the one hand one has to tell the facts and on the other hand, he/she has to describe the meaning of these facts to herself/himself. To emphasize the double nature of the narrative about one’s working life I analyzed the empirical data both by categorizing it according to the cultural models of storytelling (heroic story, comedy, irony and tragedy) and by studying the themes most of the interviewees talked about. Ethics of the study I chose to use narrative within qualitative interviews on the grounds that in my opinion is more ethical and more empowering than the more traditional structured interview methods. During the research process I carefully followed the ethical rules of a qualitative research. The purpose of the interviews and the research was told to the interviewees by giving them a written description of the study. Oral permission to use the interview in this research was obtained from the interviewees. The names and places, which are mentioned in the study, are changed to conceal the actual identity of the interviewees. I shared the analysis with the interviewees by sending each of them the first analysis of their personal interview. This way I asked them to make sure that the identity was hidden well enough and hoped to give interviewees a chance to look at their narratives, to instigate new actions and sustain the present one (Smith 2001, 721). Also I hoped to enjoy a new possibility of joint authorship. Main results As a result of the study I introduce six models of telling a story. The four typical western cultural models that guide the telling are: heroic story, comedy, tragedy and satirical story (Hänninen 1999). In addition to these models I found two ways of telling a career filled with fixed-term employments that differ significantly from traditional career story telling. However, the story models in which the interviewees pour their experience locates the fixed term employers work career in an imagined life trajectory and reveals the meaning they give to it. I analyze the many sided heroic story that Liisa tells as an example of the strength of the fear of failing or losing the job the fixed term employee feels. By this structure it is also possible to show that success is felt to be entirely a matter of chance. Tragedy, the failure in one’s trial to get something, is a model I introduce with the help of Vilppu’s story. This narrative gets its meaning both from the sorrow of the failure in the past and the rise of something new the teller has found. Aino tells her story as a comedy. By introducing her narrative, I suggest that the purpose of the comedy, a stronger social consensus, gets deeper and darker shade by fixed-term employment: one who works as a fixed term employee has to take his/her place in his/her work community by him/herself without the support the community gives to those in permanent position. By studying the satiric model Rauno uses, I argue that using irony both turns the power structures to a carnival and builds free space to the teller of the story and to the listener. Irony also helps in building a consensus, mutual understanding, between the teller and the listener and it shows the distance the teller tells to exist between him and others. Irony, however, demands some kind of success in one’s occupational career but also at least a minor disappointment in the progress of it. Helmi tells her story merely as a detective story. By introducing Helmi’s narrative, I argue that this story model strengthens the trust in fairness of the society the teller and the listener share. The analysis also emphasizes the central position of identity work, which is caused by fixed-term employment. Most of the interviewees talked about getting along in working life. I introduced Sari’s narrative as an example of this. In both of these latter narratives one’s personal character and habits are lifted as permanent parts of the actual professional expertise, which in turn varies according to different situations. By introducing these models, I reveal that the fixed-term employees have different strategies to cope with their job situations and these strategies vary according to their personal motives and situations and the actual purpose of the interview. However, I argue that they feel the space between their hopes and fears narrow and unsecure. In the research report I also introduce pieces of the stories – themes – that the interviewees use to build these survival strategies. They use their personal curriculum vitae or portfolio, their position in work community and their work morals to build their professional identity. Professional identity is flexible and varies in time and place, but even then it offers a tool to fix one’s identity work into something. It offers a viewpoint to society and a tool to measure one’s position in surrounding social nets. As one result of the study I analyze the position the fixed-term employees share on the edge of their job communities. I summarize the hopes and fears the interviewees have concerning employers, trade unions, educational institutions and the whole society. In their opinion, the solidarity between people has been weakened by the short-sighted power of the economy. The impact the fixed-term employment has on one’s professional identity and social capital is a many-sided and versatile process. Fixed-term employment both strengthens and weakens the professional identity, social capital and the building of trust. Fixed-term employment also affects one’s day-to-day life by excluding her/him from the norm and by one’s difficulty in making long-term plans (Jokinen 2005). Regardless of the nature of the job contract, the workers themselves are experts in making the best of their sometimes less than satisfying work life and they also build their professional identity by using creatively their education, work experiences and interpersonal relations. However, a long career of short fixed-term employments may seriously change the perception of employee about his/her role. He/she may start concentrating only in coping in his/her unsatisfactory situation and leaves the active improvement of the lousy working conditions to other people. Keywords: narrative, fixed-tem employment, occupational identity, work, story model, social capital, career  

Observation of a chiral smectic phase in azobenzene-linked bolaamphiphiles containing free sugars

Amphiphilic sugars exhibit both lyotropic and thermotropic liquid-crystalline behavior. Interestingly, in spite of the abundance of chiral centers in amphiphilic sugars, their liquid-crystalline phases do not exhibit macroscopic chirality. Herein, we report on the first observation of macroscopic chirality in sugar-based bolaamphiphiles containing free hydroxyl groups. The manifestation of the chiral smectic C* phase in these bolaamphiphiles has been observed to be critically dependent on the presence of the azobenzene moiety and the suitable length of the methylene spacer. These results imply that by suitable selection of linker groups, mesogenic bolaamphiphiles possessing macroscopic chirality can be designed using a variety of naturally available sugar derivatives.

Trust and Safe Choices: Coping with health-related risks in food consumption in St. Petersburg

This dissertation considers the problem of trust in the context of food consumption. The research perspectives refer to institutional conditions for consumer trust, personal practices of food consumption, and strategies consumers employ for controlling the safety of their food. The main concern of the study is to investigate consumer trust as an adequate response to food risks, i.e. a strategy helping the consumer to make safe choices in an uncertain food situation. "Risky" perspective serves as a frame of reference for understanding and explaining trust relations. The original aim of the study was to reveal the meanings applied to the concepts of trust, safety and risks in the perspective of market choices, the assessments of food risks and the ways of handling them. Supplementary research tasks presumed descriptions of institutional conditions for consumer trust, including descriptions of the food market, and the presentation of food consumption patterns in St. Petersburg. The main empirical material is based on qualitative interviews with consumers and interviews and group discussions with professional experts (market actors, representatives of inspection bodies and consumer organizations). Secondary material is used for describing institutional conditions for consumer trust and the market situation. The results suggest that the idea of consumer trust is associated with the reputation of suppliers, stable quality and taste of their products, and reliable food information. Being a subjectively constructed state connected to the act of acceptance, consumer trust results in positive buying decisions and stable preferences in the food market. The consumers' strategies that aim at safe food choices refer to repetitive interactions with reliable market actors that free them from constant consideration in the marketplace. Trust in food is highly mediated by trust in institutions involved in the food system. The analysis reveals a clear pattern of disbelief in the efficiency of institutional food control. The study analyses this as a reflection of "total distrust" that appears to be a dominant mood in many contexts of modern Russia. However, the interviewees emphasize the state's decisive role in suppressing risks in the food market. Also, the findings are discussed with reference to the consumers' possibilities of personal control over food risks. Three main responses to a risky food situation are identified: the reflexive approach, the traditional approach, and the fatalistic approach.

Water in Action : Encounters among 2- to 3-Year-Old Children, Adults, and Water in Day Care

In line with cultural psychology and developmental theory, a single case approach is applied to construct knowledge on how children s interaction emerge interlinked to historical, social, cultural, and material context. The study focuses on the negotiation of constraints and meaning construction among 2-to 3-year-old children, a preschool teacher, and the researcher in settings with water. Water as an element offers a special case of cultural canalization: adults selectively monitor and guide children s access to it. The work follows the socio-cultural tradition in psychology, particularly the co-constructivist theory of human development and the Network of Meanings perspective developed at the University of São Paulo. Valsiner s concepts of Zone of Free Movement and Zone of Promoted Action are applied together with studies where interactions are seen as spaces of construction where negotiation of constraints for actions, emotions, and conceptions occur. The corpus was derived at a Finnish municipal day care centre. During a seven months period, children s actions were video recorded in small groups twice a month. The teacher and the researcher were present. Four sessions with two children were chosen for qualitative microanalysis; the analysis also addressed the transformations during the months covered by the study. Moreover, the data derivation was analyzed reflectively. The narrowed down arenas for actions were continuously negotiated among the participants both nonverbally and verbally. The adults expectations and intentions were materialized in the arrangements of the setting canalizing the possibilities for actions. Children s co-regulated actions emerged in relation to the adults presence, re-structuring attempts, and the constraints of the setting. Children co-constructed novel movements and meanings in relation to the initiatives and objects offered. Gestures, postures, and verbalizations emerged from the initially random movements and became constructed to have specific meanings and functions; meaning construction became abbreviated. The participants attempted to make sense of the ambiguous (explicit and implicit) intentions and fuzzy boundaries of promoted and possible actions: individualized yet overlapping features were continuously negotiated by all the participants. Throughout the months, children s actions increasingly corresponded adults (re-defined) conceptions of water researchers as an emerging group culture. Water became an instrument and a context for co-regulations. The study contributes to discussions on children as participants in cultural canalization and emphasizes the need for analysis in early childhood education practices on the implicit and explicit constraint structures for actions.

Personporträttet som tidningsgenre : En närläsningsstudie med fokus på innehållsliga teman, berättarkonventioner och kön

The thesis The portrait interview as a newspaper genre. A qualitative close reading focussing on topical motifs, conventions of narration, and gender defines the portrait interview as a newspaper genre and analyses how the personalities in the portraits are constructed textually. The main body of material consists of 107 portrait interviews in two morning newspapers, Dagens Nyheter (published in Stockholm, Sweden) and Hufvudstadsbladet (published in Swedish in Helsinki, Finland), during two one-week periods (week 46/1999 and week 38/2002). There is also complementary material of 59 portraits from four magazines. The study is carried out within the research traditions of journalistic genre studies, gender and journalism, and critical text analysis. It is comprised of a qualitative close reading focussing on content (topical motifs or themes), conventions of narration, and gender. The methods used to carry out the study are qualitative close reading and quantitative content analysis. The analysis identifies the stylistic elements that differentiate the portrait genre from other journalistic genres, as well as from the autobiographical genre, and explores what opportunities and limitations these elements present for the inclusion of even more women protagonists in the portrait genre. The portrait interview is an exception from the critical mission of journalism in general, with its position as a genre of politeness. Since a typical characteristic of the portrait interview genre is that it pays tribute to the protagonist, the genre reveals the kind of personalities and lives that are seen as admirable in society. Four levels of portrait interview are defined: the prototype portrait, the pure portrait, the hybrid portrait and the marginal portrait. The prototype is a raw version of a portrait that fulfils the criteria but may be lacking in content and stylistics. The pure portrait does not lack these qualities and resembles an ideal portrait. The hybrid is a borderline case which relates to another genre or is a mixture between the portrait and some other genre, most commonly the news genre. The marginal portrait does not fulfil the criteria, and can therefore be seen as an inadequate portrait. For example, obituaries and caricatures are excluded if the protagonist s voice is never quoted. The analysis resulted in three factors that in part help to explain why the portrait interview genre has somewhat more female protagonists than journalistic news texts do in general. The four main reasons why women are presented somewhat more in the portrait genre than in other journalistic genres are: (i) women are shown as exceptions to the female norm when, for example, taking a typical male job or managing in positions where there are few women; (ii) women are shown as representing female themes ; (iii) use of the double bind as a story-generating factor; and (iv) the intimisation of journalism. The double bind usually builds up the narration on female ambiguity in the contradiction between private and public life, for example family and career, personal desire and work. The intimisation of journalism and the double bind give women protagonists somewhat more publicity also because of the tendency of portrait interviews to create conflicts within the protagonist, as an exception to journalism in general where conflicts are created or seen as existing between, for example, persons, groupings or parties. Women protagonists and their lives create an optimal narration of inner conflicts originating in the double bind as men are usually not seen as suffering from these conflicts. The analysis also resulted in gendered portrait norms: The feminine portrait norm and the masculine portrait norm or more concretely, professional life and family life as expectation and exception. Women are expected to be responsible parents and mediocre professionals, while men are expected to be professionals and in their free time engaging fathers. Key words: journalism, genre, portrait interview, gender, interview, newspaper, women s magazine.

Current Care Guidelines for Cardiopulmonary Resuscitation : Implementation, skills and attitudes

Background: The national resuscitation guidelines were published in Finland in 2002 and are based on international guidelines published in 2000. The main goal of the national guidelines, available on the Internet free of charge, is early defibrillation by nurses in an institutional setting. Aim: To study possible changes in cardiopulmonary resuscitation (CPR) practices, especially concerning early defibrillation, nurses and students attitudes of guideline implementation and nurses and students ability to implement the guideline recommendations in clinical practices after publication of the Current Care (CC) guidelines for CPR 2002. Material and methods: CPR practices in Finnish health centres; especially concerning rapid defibrillation programmes, as well as the implementation of CC guidelines for CPR was studied in a mail survey to chief physicians of every health centre in Finland (Study I). The CPR skills using an automated external defibrillator (AED) were compared in a study including Objective stuctured clinical examination (OSCE) of resuscitation skills of nurses and nursing students in Finnish and Swedish hospital and institution (Studies II, III). Attitudes towards CPR-D and CPR guidelines among medical and nursing students and secondary hospital nurses were studied in surveys (Studies IV, V). The nurses receiving different CPR training were compared in a randomized trial including OSCE of CPR skills of nurses in Finnish Hospital (Study VI). Results: Two years after the publication, 40.7% of Finnish health centres used national resuscitation guidelines. The proportion of health centres having at least one AED (66%) and principle of nurse-performed defibrillation without the presence of a physician (42%) had increased. The CPR-D training was estimated to be insufficient regarding basic life support and advanced life support in the majority of health centres (Study I). CPR-D skills of nurses and nursing students in two specific Swedish and Finnish hospitals and institutions (Study II and III) were generally inadequate. The nurses performed better than the students and the Swedish nurses surpassed the Finnish ones. Geriatric nurses receiving traditional CPR-D training performed better than those receiving an Internet-based course but both groups failed to defibrillate within 60 s. Thus, the performance was not satisfactory even two weeks after traditional training (Study VI). Unlike the medical students, the nursing students did not feel competent to perform procedures recommended in the cardiopulmonary resuscitation guidelines including the defibrillation. However, the majority of nursing students felt confident about their ability to perform basic life support. The perceived ability to defibrillate correlated significantly with a positive attitude towards nurse-performed defibrillation and negatively with fear of damaging the patient s heart by defibrillation (Study IV). After the educational intervention, the nurses found their level of CPR-D capability more sufficient than before and felt more confident about their ability to perform defibrillation themselves. A negative attitude toward defibrillation correlated with perceived negative organisational attitudes toward cardiopulmonary resuscitation guidelines. After CPR-D education in the hospital, the majority (64%) of nurses hesitated to perform defibrillation because of anxiety and 27 % hesitated because of fear of injuring the patient. Also a negative personal attitude towards guidelines increased markedly after education (Study V). Conclusions: Although a significant change had occurred in resuscitation practices in primary health care after publication of national cardiopulmonary resuscitation guidelines the participants CPR-D skills were not adequate according to the CPR guidelines. The current way of teaching is unlikely to result in participants being able to perform adequate and rapid CPR-D. More information and more frequent training are needed to diminish anxiety concerning defibrillation. Negative beliefs and attitudes toward defibrillation affect the nursing students and nurses attitudes toward cardiopulmonary resuscitation guidelines. CPR-D education increased the participants self-confidence concerning CPR-D skills but it did not reduce their anxiety. AEDs have replaced the manual defibrillators in most institutions, but in spite of the modern devices the anxiety still exists. Basic education does not provide nursing students with adequate CPR-D skills. Thus, frequent training in the workplace has vital importance. This multi-professional program supported by the administration might provide better CPR-D skills. Distance learning alone cannot substitute for traditional small-group learning, tutored hands-on training is needed to learn practical CPR-D skills. Standardized testing would probably help controlling the quality of learning. Training of group-working skills might improve CPR performance.

Influence lines for bending under a ring load of a free shell, a shell embedded in a soft medium and a shell containing a soft core

Theoretical expressions for stresses and displacements have been derived for bending under a ring load of a free shell, a shell embedded in a soft medium, and a shell containing a soft core. Numerical work has been done for typical cases with an Elliot 803 Digital Computer and influence lines are drawn therefrom.

Free convection heat transfer from vertical cylinders and wires

Free convection heat transfer from vertical long cylinders and wires were investigated experimentally. The experiments were designed to check the analytical results and the radius of curvature criteria formulated by the same authors. The results for water, the fluid medium used in the present set of experiments, are in excellent agreement with the theory. The results of Hama, Recesso and Christiaens, Kyte, Madden and Piret, in air are also shown to be in close agreement with proposed correlations.

Boxicity and cubicity of asteroidal triple free graphs

The boxicity of a graph G, denoted box(G), is the least integer d such that G is the intersection graph of a family of d-dimensional (axis-parallel) boxes. The cubicity, denoted cub(G), is the least dsuch that G is the intersection graph of a family of d-dimensional unit cubes. An independent set of three vertices is an asteroidal triple if any two are joined by a path avoiding the neighbourhood of the third. A graph is asteroidal triple free (AT-free) if it has no asteroidal triple. The claw number psi(G) is the number of edges in the largest star that is an induced subgraph of G. For an AT-free graph G with chromatic number chi(G) and claw number psi(G), we show that box(G) <= chi(C) and that this bound is sharp. We also show that cub(G) <= box(G)([log(2) psi(G)] + 2) <= chi(G)([log(2) psi(G)] + 2). If G is an AT-free graph having girth at least 5, then box(G) <= 2, and therefore cub(G) <= 2 [log(2) psi(G)] + 4. (c) 2010 Elsevier B.V. All rights reserved.

On the ignition and extinction problems in forced convection systems

In this paper the problem of ignition and extinction has been formulated for the flow of a compressible fluid with Prandtl and Schmidt numbers taken as unity. In particular, the problems of (i) a jet impinging on a wall of combustible material and (ii) the opposed jet diffusion flame have been studied. In the wall jet case, three approximations in the momentum equation namely, (i) potential flow, (ii) viscous flow, (ii) viscous incompressible with k = 1 and (iii) Lees' approximation (taking pressure gradient terms zero) are studied. It is shown that the predictions of the mass flow rates at extinction are not very sensitive to the approximations made in the momentum equation. The effects of varying the wall temperature in the case (i) and the jet temperature in the case (ii) on the extinction speeds have been studied. The effects of varying the activation energy and the free stream oxidant concentration in case (ii), have also been investigated.

Determination of the orthotropic plate parameters of stiffened plates and grillages in free vibration

It is well known that the analysis of vibration of orthogonally stiffened rectangular plates and grillages may be simplified by replacing the actual structure by an orthotropic plate. This needs a suitable determination of the four elastic rigidity constants Dx, Dy, Dxy, D1 and the mass {Mathematical expression} of the orthotropic plate. A method is developed here for determining these parameters in terms of the sectional properties of the original plate-stiffener combination or the system of interconnected beams. Results of experimental work conducted on aluminium plates agree well with the results of the theory developed here.