Assessment of catches, landings and fishing effort as useful tools for MPA management

Marine protected areas (MPAs) have been widely recognized as a tool to achieve both fisheries management and conservation goals. Simultaneously achieving these multiple goals is difficult due to conflicts between conservation (often long-term) and economic (often short-term) objectives. MPA implementation often includes additional control measures on fisheries (e.g. vessel size restrictions, gear exclusion, catch controls) that in the short-term may have impacts on local fishers' communities. Thus, monitoring fisheries catches before, during and after MPA implementation is essential to document changes in fisheries activities and to evaluate the impact of MPAs in fishers' communities. Remarkably, in contrast with standard fisheries-independent biological surveys, these data are rarely measured at appropriate spatial scales following MPA implementation. Here, the effects of MPA implementation on local fisheries are assessed in a temperate MPA (Arrabida Marine Park, Portugal), using fisheries monitoring methods combining spatial distribution of fishing effort, on-board observations and official landings statistics at scales appropriate to the Marine Park. Fisheries spatial distribution, fishing effort, on-board data collection and official landings registered for the same vessels over time were analysed between 2004 and 2010. The applicability and reliability of using landings statistics alone was tested (i.e. when no sampling data are available) and we conclude that landings data alone only allow the identification of general patterns. The combination of landings information (which is known to be unreliable in many coastal communities) with other methods, provides an effective tool to evaluate fisheries dynamics in response to MPA implementation. As resources for monitoring socio-ecological responses to MPAs are frequently scarce, the use of landings data calibrated with fisheries information (from vessels, gear distribution and on-board data) is a valuable tool applicable to many worldwide coastal small-scale fisheries. (C) 2015 Elsevier B.V. All rights reserved.

Catches of the sport fishing competitions along the Algarve coast (Portugal): species, sizes, catch rates, and trends

Background. Stocks of many marine fishes are in decline and a number of studies suggest that for some species the impact of recreational angling may be important. To date, only recreational (leisure) fishing surveys have been conducted in Portugal, with no studies on beach angling competitions, dynamically increasing in number over the past 10 to 20 years. In view of the above, we decided to evaluate the impact of such events on the Algarve coast (southern Portugal) in terms of the abundance, diversity, and respective weight of fish species caught and outline some conservation measures and recommendations for the management of the targeted species. Materials and methods. Participants of 22 angling competitions taking place between February and June 2007 were surveyed. In each competition a random sample of anglers was interviewed, and the specimens caught by each participant were identified, weighed, and measured. Results. Thirteen taxa belonging to eight families were identified, and the most common were: garfish, Belone belone (Linnaeus, 1761); mullets, Mugilidae (not identified); and mackerels, Scomber spp. A total of 563 specimens were sampled, totalling 75.4 kg of weight, with the average catch per angler weighing 0.5 +/- 0.05 SE (n = 153) kg. Differences were also observed between the length at first maturity (L(50)) of the specimens caught and their respective Minimum Landing Size (MLS) and Allowed Minimum Size (AMS), most particularly in the case of the European seabass, Dicentrarchus labrax (L.), with almost all individuals caught measuring below the species-specific L50. Analysis of time series of competition results (1996-2009) showed no evidence of a decrease in catches or in mean weight. Conclusion. Based on the results we propose that the AMS for beach angling competitions should be increased to the MLS in order to prevent the capture of juvenile fishes, especially the sea bass. Future studies should address the size selectivity of the hooks used in beach competitions, with a view to the implementation of a minimum hook size for competitions.

Lost fishing gear and litter at Gorringe Bank (NE Atlantic)

Studies concerning marine litter have received great attention over the last several years by the scientific community mainly due to their ecological and economic impacts in marine ecosystems, from coastal waters to the deep ocean seafloor. The distribution, type and abundance of marine litter in Ormonde and Gettysburg, the two seamounts of Gorringe Bank, were analyzed from photo and video imagery obtained during ROV-based surveys carried out at 60–3015 m depths during the E/V Nautilus cruise NA017. Located approximately 125 nm southwest of Portugal, Gorringe Bank lays at the crossroad between the Atlantic and the Mediterranean and is therefore characterized by an intense maritime traffic and fishing activities. The high frequency of lost or discarded fishing gear, such as cables, longlines and nets, observed on Gorringe Bank suggests an origin mostly fromfishing activities,with a clear turnover in the type of litter (mostly metal, glass and to amuch lesser extent, plastic) with increasing depth. Litter was more abundant at the summit of Gorringe Bank (ca. 4 items·km−1), decreasing to less than 1 item·km−1 at the flanks and to ca. 2 items·km−1 at greater depths. Nevertheless, litter abundance appeared to be lower than in continental margin areas. The results presented herein are a contribution to support further actions for the conservation of vulnerable habitats on Gorringe Bank so that they can continue contributing to fishery productivity in the surrounding region.

Catchability and survival of the resources during fishing operation

The present Ph.D. thesis aims to test and evaluate by-catch reduction devices (BRDs) that minimize the retention of undersized fish and do not penalize revenues of the fishing industry. Considering that a fraction of fish that escape from fishing gear or that are rejected at the sea probably does not survive (unaccounted mortality), it is a major concern for sustainable fisheries management, as unaccounted mortality may lead to biased stock assessment since they will tend to underestimate fishing mortality and overestimate stock size. In this context, in the present Ph.D. thesis, the escape survival (i.e. survival of the fish escaped through the trawl net codend) of the Mullus barbatus Linnaeus 1758 and the discard survival (survival of fish rejected at the sea after being hauled on deck) of Trachurus trachurus were evaluated for the first time in the central Mediterranean Sea. In conclusion, the use of underwater lights in Mediterranean trawl fisheries should be carefully regulated through ad hoc measures that are currently lacking, to minimize the potential impacts of artificial light on some already overexploited stocks. Even if further works should be carried out in the future to test BRDs performances in different areas and seasons, the T90 50 mm codend and the Grid-T45 40 mm seem promising tools to reduce the catch of undersized individuals and contribute to mitigating the current overfishing of Parapenaeus longirostris and Merluccius merluccius. The escape survival of M. barbatus was high and thanks to an improved methodology the bias in the sampling was minimized. However, for improved stock assessment of M. barbatus, the experiment should be repeated to provide accurate escape mortality estimates. While the discard survival of T. trachurus was very low and according to the landing obligation (Reg. EU 1380/2013) all the juveniles of the species should be landed.

Fish Biodiversity Of The Vitória-trindade Seamount Chain, Southwestern Atlantic: An Updated Database.

Despite a strong increase in research on seamounts and oceanic islands ecology and biogeography, many basic aspects of their biodiversity are still unknown. In the southwestern Atlantic, the Vitória-Trindade Seamount Chain (VTC) extends ca. 1,200 km offshore the Brazilian continental shelf, from the Vitória seamount to the oceanic islands of Trindade and Martin Vaz. For a long time, most of the biological information available regarded its islands. Our study presents and analyzes an extensive database on the VTC fish biodiversity, built on data compiled from literature and recent scientific expeditions that assessed both shallow to mesophotic environments. A total of 273 species were recorded, 211 of which occur on seamounts and 173 at the islands. New records for seamounts or islands include 191 reef fish species and 64 depth range extensions. The structure of fish assemblages was similar between islands and seamounts, not differing in species geographic distribution, trophic composition, or spawning strategies. Main differences were related to endemism, higher at the islands, and to the number of endangered species, higher at the seamounts. Since unregulated fishing activities are common in the region, and mining activities are expected to drastically increase in the near future (carbonates on seamount summits and metals on slopes), this unique biodiversity needs urgent attention and management.

Praticas socioculturais, poder e diferenciação em Bico, Cuiamucu e Canela-Fina - comunidades amazonicas

Universidade Estadual de Campinas . Faculdade de Educação Física

O livro como recurso didatico no ensino do futebol

Universidade Estadual de Campinas. Faculdade de Educação Física

O lazer e a residência secundária em Angra dos Reis-RJ = : The leisure and the second homes in Angra dos Reis, RJ

Universidade Estadual de Campinas . Faculdade de Educação Física

Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and IPS (I) and Duceram (D) ceramics were used for the MCBS test and dilatometric test. Forty-eight ceramic rings were built around metallic rods (3.0 mm in diameter and 70.0 mm in length) made from the evaluated alloys. The rods were subsequently embedded in gypsum cast in order to perform a tensile load test, which enabled calculating the CMBS. Five specimens (2.0 mm in diameter and 12.0 mm in length) of each material were made for the dilatometric test. The chromel-alumel thermocouple required for the test was welded into the metal test specimens and inserted into the ceramics. ANOVA and Tukey's test revealed significant differences (p=0.01) for the MCBS test results (MPa), with PI showing higher MCBS (67.72) than the other pairs, which did not present any significant differences. The CTE (10-6 oC-1) differences were: VBI (0.54), VBD (1.33), VB2I (-0.14), VB2D (0.63), PI (1.84) and PD (2.62). Pearson's correlation test (r=0.17) was performed to evaluate of correlation between MCBS and CTE differences. Within the limitations of this study and based on the obtained results, there was no correlation between MCBS and CTE differences for the evaluated metal-ceramic pairs.

Effect of laser welding on the titanium composite tensile bond strength

The aim of this study was to analyze the shear bond strength between commercially pure titanium, with and without laser welding, after airbone-particle abrasion (Al2O3) and 2 indirect composites. Sixty-four specimens were cast and divided into 2 groups with and without laser welding. Each group was divided in 4 subgroups, related to Al2O3 grain size: A - 250 µm; B - 180 µm; C- 110 µm; and D - 50 µm. Composite rings were formed around the rods and light polymerized using UniXS unit. Specimens were invested and their shear bond strength at failure was measured with a universal testing machine at a crosshead speed of 2.0 mm/min. Statistical analysis was carried out with ANOVA and Tukey's test (α=0.05). The highest bond strength means were recorded in 250 µm group without laser welding. The lowest shear bond strength means were recorded in 50 µm group with laser welding. Statistically significant differences (p<0.05) were found between all groups. In conclusion, airborne particle abrasion yielded significantly lower bond strength as the Al2O3 particle size decreased. Shear bond strength decreased in the laser welded specimens.

Polymerization shrinkage stress of composites photoactivated by different light sources

The purpose of this study was to compare the polymerization shrinkage stress of composite resins (microfilled, microhybrid and hybrid) photoactivated by quartz-tungsten halogen light (QTH) and light-emitting diode (LED). Glass rods (5.0 mm x 5.0 cm) were fabricated and had one of the surfaces air-abraded with aluminum oxide and coated with a layer of an adhesive system, which was photoactivated with the QTH unit. The glass rods were vertically assembled, in pairs, to a universal testing machine and the composites were applied to the lower rod. The upper rod was placed closer, at 2 mm, and an extensometer was attached to the rods. The 20 composites were polymerized by either QTH (n=10) or LED (n=10) curing units. Polymerization was carried out using 2 devices positioned in opposite sides, which were simultaneously activated for 40 s. Shrinkage stress was analyzed twice: shortly after polymerization (t40s) and 10 min later (t10min). Data were analyzed statistically by 2-way ANOVA and Tukey's test (a=5%). The shrinkage stress for all composites was higher at t10min than at t40s, regardless of the activation source. Microfilled composite resins showed lower shrinkage stress values compared to the other composite resins. For the hybrid and microhybrid composite resins, the light source had no influence on the shrinkage stress, except for microfilled composite at t10min. It may be concluded that the composition of composite resins is the factor with the strongest influence on shrinkage stress.

Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium

This study evaluated the effect of chemical and mechanical surface treatments for cast metal alloys on the bond strength of an indirect composite resin (Artglass) to commercially pure titanium (cpTi). Thirty cylindrical metal rods (3 mm diameter x 60 mm long) were cast in grade-1 cpTi and randomly assigned to 6 groups (n=5) according to the received surface treatment: sandblasting; chemical treatment; mechanical treatment - 0.4 mm beads; mechanical treatment - 0.6 mm beads; chemical/mechanical treatment - 0.4 mm; and chemical/mechanical treatment - 0.6 mm beads. Artglass rings (6.0 mm diameter x 2.0 mm thick) were light cured around the cpTi rods, according manufacturer's specifications. The specimens were invested in hard gypsum and their bond strength (in MPa) to the rods was measured at fracture with a universal testing machine at a crosshead speed of 2.0 mm/min and 500 kgf load cell. Data were analyzed statistically by one-way ANOVA and Tukey test (a=5%). The surface treatments differed significantly from each other (p<0.05) regarding the recorded bond strengths. Chemical retention and sandblasting showed statistically similar results to each other (p=0.139) and both had significantly lower bond strengths (p<0.05) than the other treatments. In conclusion, mechanical retention, either associated or not to chemical treatment, provided higher bond strength of the indirect composite resin to cpTi.

Influência do estreitamento do canal vertebral e do tempo para a descompressão na recuperação locomotora de ratos

OBJETIVO: o objetivo deste trabalho foi estudar as consequências da lesão por contusão da medula espinhal, associada ao estreitamento do canal vertebral, no comportamento motor de ratos, avaliando-se o efeito do tempo para descompressão na recuperação neurológica dos animais. MÉTODOS: foram utilizados ratos Wistar machos (n=6 por grupo), subdivididos nos seguintes grupos experimentais: laminectomia (T9-T10, Grupo Controle), contusão por queda de peso (10 g de peso, 15 cm de altura), estreitamento do canal vertebral em 35% (hastes de policarbonato; espessura de 0,78 mm) e contusão associada ao estreitamento do canal vertebral. O grupo de lesão associada foi ainda subdividido em sem ou com descompressão 24 ou 72 horas após a cirurgia. Os animais foram sacrificados sete dias após os procedimentos cirúrgicos. A função locomotora dos animais foi avaliada por meio do teste do campo aberto, do teste do plano inclinado e pela aplicação da escala BBB, antes da cirurgia, 24 e 72 horas depois da cirurgia e após 7 dias do procedimento cirúrgico. RESULTADOS: a lesão por queda de peso e compressão da medula espinhal, bem como a lesão mista, prejudicaram o comportamento motor dos animais, sendo que a descompressão cirúrgica após 24 e 72 horas da cirurgia não melhorou a recuperação motora dos animais, como mostram os resultados da avaliação de campo aberto, no plano inclinado e pela escala BBB. Por outro lado, os animais que sofreram lesão medular por queda de peso apresentaram melhores escores na escala BBB e ângulos maiores no plano inclinado do que aqueles que sofreram lesão por estreitamento do canal vertebral ou lesão mista. CONCLUSÕES: a lesão por queda de peso ou estreitamento do canal vertebral provocou alterações no comportamento motor dos animais, sendo que a descompressão não trouxe melhora funcional significativa.

Growth parameters and mortality rate of the Scomber japonicus peruanus (Jordán & Hubb, 1925) along the Peruvian coast, South Pacific

The growth parameters and the mortality rates of the Scomber japonicus peruanus (Chub mackerel) were studied based on monthly data of frequency of fork length classes obtained from commercial landings off the Peruvian coast from 1996 to 1998. The asymptotic body length and growth rate values obtained by the ELEFAN I (Electronic Length Frequency Analysis) ranged from 40.20 cm to 42.20 cm and from 0.38 to 0.39, respectively. The oscillation amplitude was 0.60; the Winter point values varied from 0.50 to 0.60 and the performance index from 2.79 to 2.84. The total mortality rate of the Chub mackerel obtained by the linearized catch curve oscillated between 1.68 and 3.35. The rate of fishing mortality varied from 1.16 to 2.78 and the exploitation rate from 0.68 to 0.84. The annual rate of natural mortality estimated by the Pauly's method ranged from 0.52 to 0.53. The results obtained allow us to conclude that the longevity of the Chub mackerel was slightly over seven years.

Ichthyofauna in an estuary of the Mataripe area, Todos os Santos Bay, Bahia, Brazil

The community structure and dynamics as well as some biological parameters of selected species of the ichthyofauna of the Mataripe estuarine region affected by the Landulfo Alves Oil Refinery (RLAM) were analyzed. Twenty stations were sampled with a gillnet in five different periods: August and December 2003, March and July/August 2004 and January 2005. Thirty-five actinopterygian species and one elasmobranch species were recorded, Oligoplites saurus, Diapterus rhombeus, Lutjanus synagris and Scomberomorus brasiliensis among them, on all the campaigns. A total of 1368 specimens, weighing 36.10 kg, were caught. The ichthyofauna total biomass was greater, in weight, on the eastern side of the study region, especially at the stations close to the shoals/reefs and the rocky bottom. A similar pattern was also observed for the diversity values. In general, low evenness and diversity were observed in the area studied, possibly as a result of the fishing gear used. D. rhombeus juveniles dominated in all but one of the samplings (July 2004), in which latter Cyclichthys spinosus was dominant. Carangids and species associated with consolidated bottoms were observed, although in small numbers, throughout the study period. In spite of the limitations imposed by the gear used for sampling, the estuarine area influenced by the RLAM was seen to play a role as a growth area for the great majority of species, especially the mojarra (D. rhombeus), but it offers no fishing potential due to the prevalence of young and small individuals. Evidence of imminent spawning was recorded for Pomadasys corvinaeformis in August 2003, and recent spawning in March 2004 for Oligoplites saurus. Further, mature individuals occurred in insufficient numbers to permit population level evaluation.