Fachadas ventiladas. Avaliação de sistema de camada de vidro duplo ventilado

Dissertação de Mestrado, Energias Renováveis e Gestão de Energia, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Influência do tipo de vidro de cobertura na produtividade do tomate em estufa

Mestrado em Engenharia Agronómica - Hortofruticultura e Viticultura - Instituto Superior de Agronomia - UL

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Análisis comparativo entre el concreto simple y el concreto con adición de fibra de acero al 12% y 14%.

55 p.

Análisis de las propiedades mecánicas de un concreto convencional adicionando fibra de cáñamo

84 p.

Reutilização de solução extratora na determinação de fibra em detergente neutro e fibra em detergente ácido.

2006

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Novas linhagens de algodoeiro herbáceo com coloração na fibra.

No Brasil, o programa de melhoramento visando obtenção de cultivares com fibras coloridas foi iniciado pela Embrapa Algodão em meados da década de 1990 e até o presente momento já foram lançadas seis cultivares. Excetuando-se a BR 200, a primeira a ser desenvolvida e descendente de uma espécie de algodoeiro arbóreo (G. hirsutum L. r. marie galante Hutch.) as demais são de espécies de algodoeiro herbáceo (G. hirsutum L. r. latifolium Hutch.) e descendem do cruzamento de germoplasma de fibra colorida introduzido com germoplasma de fibra branca e adaptado ao cultivo na região Nordeste. Entre as cultivares desenvolvidas, há uma com fibra na cor verde e as demais possuem fibra marrom em diferentes tonalidades. Por outro lado, a espécie G. barbadense L. possui acessos silvestres com cores diferentes daquelas de G. hirsutum L., tais como lilás e marrom púrpura, além de outras. Há alguns anos a Embrapa Algodão vem trabalhando com estes materiais. Assim, o objetivo deste ?documento? é apresentar os resultados obtidos utilizando esta espécie com doadora de cores na fibra. O programa de melhoramento do algodão de fibra colorida da Embrapa objetiva a obtenção de cultivares com novas tonalidades de cores utilizando métodos convencionais de melhoramento.

Formulação e vida de prateleira de Pseudomonas chlororaphis 63- 28 em fibra de coco, talco e turfa.

2009

Atitudes da população portuguesa em relação à fibra alimentar

Introdução: A fibra dietética (FD) tem feito parte da dieta humana desde há milénios, embora os seus benefícios tenham sido reconhecidos, principalmente, nas últimas décadas. Objetivos: Porque a FD é um componente importante de uma dieta saudável, o objetivo deste trabalho foi avaliar os hábitos de consumo dos Portugueses, bem como o seu conhecimento sobre os alimentos ricos em fibras e as suas atitudes em relação à rotulagem dos alimentos. Métodos: Foi realizado um estudo descritivo transversal usando uma amostra não-probabilística de 382 participantes. Resultados: Os resultados mostraram que a ingestão de alimentos ricos em fibras, como frutas, vegetais e cereais, foi muito menor do que a ingestão recomendada. Os resultados também indicaram que a maioria das pessoas não presta a atenção desejada à rotulagem de alimentos ou à informação nutricional. Conclusões: O nível geral de conhecimento sobre FD foi considerado insatisfatório, e, portanto, é necessário mais educação nutricional e desenvolver esforços para informar as pessoas acerca da importância da FD como parte da sua dieta diária.

Técnica Austin sin fijación con fibra de vidrio en cirugia hallux valgus

Tesis inédita presentada en la Universidad Europea de Madrid. Facultad de Ciencias de la Salud. Programa de Doctorado en Podología Avanzada

Diverticulosis y relación con el consumo de fibra en pacientes del Hospital Universitario de la Samaritana

Introducción: La diverticulosis es la condición más frecuentemente encontrada en la colonoscopia, condición asintomática, con un alto costo para el sistema de salud. Diversos factores han demostrado estar en relación con la aparición de la enfermedad. En nuestra población, esta información se desconoce; el objetivo del estudio es la caracterización de la población con diverticulosis y su relación con la frecuencia de la ingesta de fibra. Materiales y Métodos: Estudio observacional prospectivo de corte transversal con componente analítico. Realizado a todas las personas que asistieron al HUS a realización de colonoscopia entre Noviembre de 2015 y Abril de 2016. Se recolectaron datos de la frecuencia de fibra ingerida a través de entrevistas basadas. Resultados: Se estudiaron 278 personas, 55.7% mujeres. La prevalencia de diverticulosis fue de 21.58%, siendo más frecuente en mujeres ( 66,7%), 31% entre los 71-80 años, 2,16% tenían antecedente familiar de diverticulosis; principal sitio de afectación fue colon sigmoide en las mujeres y el colon descendente en los hombres. En las personas con diverticulosis el consumo de harina de trigo fue mayor (91,67% vs 86,7%), mientras el consumo de frutas fue mayor en las personas que no presentaron diverticulosis (83,49% vs 78,33%). Conclusiones: La prevalencia de diverticulosis es similar a lo reportado en la literatura. Así mismo se encontró un mayor consumo de fibra en la población sin divertículos lo que hace pensar que a pesar de que esta condición es multifactorial , el consumo de mayores cantidades de fibra puede prevenir la aparición de la misma