Numerical evaluation of the vibration reduction index for structural joints

The present paper addresses the analysis of structural vibration transmission in the presence of structural joints. The problem is tackled from a numerical point of view, analyzing some scenarios by using finite element models. The numerical results obtained making use of this process are then compared with those evaluated using the EN 12354 standard vibration reduction index concept. It is shown that, even for the simplest cases, the behavior of a structural joint is complex and evidences the frequency dependence. Comparison with results obtained by empirical formulas reveals that those of the standards cannot accurately reproduce the expected behavior, and thus indicate that alternative complementary calculation procedures are required. A simple methodology to estimate the difference between numerical and standard predictions is here proposed allowing the calculation of an adaptation term that makes both approaches converge. This term was found to be solution-dependent, and thus should be evaluated for each structure.

An inverse method to obtain porosity, fibre diameter and density of fibrous sound absorbing materials

Characterization of sound absorbing materials is essential to predict its acoustic behaviour. The most commonly used models to do so consider the flow resistivity, porosity, and average fibre diameter as parameters to determine the acoustic impedance and sound absorbing coefficient. Besides direct experimental techniques, numerical approaches appear to be an alternative to estimate the material’s parameters. In this work an inverse numerical method to obtain some parameters of a fibrous material is presented. Using measurements of the normal incidence sound absorption coefficient and then using the model proposed by Voronina, subsequent application of basic minimization techniques allows one to obtain the porosity, average fibre diameter and density of a sound absorbing material. The numerical results agree fairly well with the experimental data.

High selectivity of TiC-CDC for CO2/N2 separation

A series of carbide-derived carbons (CDC) have been prepared starting from TiC and using different chlorine treatment temperatures (500–1200 °C). Contrary to N2 adsorption measurements at −196 °C, CO2 adsorption measurements at room temperature and high pressure (up to 1 MPa) together with immersion calorimetry measurements into dichloromethane suggest that the synthesized CDC exhibit a similar porous structure, in terms of narrow pore volume, independently of the temperature of the reactive extraction treatment used (samples synthesized below 1000 °C). Apparently, these carbide-derived carbons exhibit narrow constrictions were CO2 adsorption under standard conditions (0 °C and atmospheric pressure) is kinetically restricted. The same accounts for a slightly larger molecule as N2 at a lower adsorption temperature (−196 °C), i.e. textural parameters obtained from N2 adsorption measurements on CDC must be underestimated. Furthermore, here we show experimentally that nitrogen exhibits an unusual behavior, poor affinity, on these carbide-derived carbons. CH4 with a slightly larger diameter (0.39 nm) is able to partially access the inner porous structure whereas N2, with a slightly smaller diameter (0.36 nm), does not. Consequently, these CDC can be envisaged as excellent sorbent for selective CO2 capture in flue-gas streams.

Short-Term Effects of a Wildfire on the Endangered Dupont's Lark Chersophilus duponti in an Arid Shrub-Steppe of Central Spain

In Europe, Dupont’s Lark Chersophilus duponti is a threatened open-habitat bird. Prescribed burning has sometimes been proposed for its conservation, but without evidence of its effectiveness. To evaluate the short-term effects of a summer wildfire on this species, we performed several transect counts in the burnt and unburnt parts of a shrubsteppe in central Spain. The same transects were counted within a three-year interval prior to the fire and were repeated during the first two springs after the fire. We also measured the vegetation during the first two springs after the fire. In the burnt area, we observed a decrease of about 85–100% in Dupont’s Lark abundance, and about 7–15% in the control area. The disappearance of the scrub cover after fire and its slow regeneration, as well as the large increase in grass cover during the second year, may explain the decrease in this habitat-specialist bird species. Fire should be avoided in areas occupied by the Dupont’s Lark, as its negative effects in the short-term may cause local extinctions. However, prescribed burning may be used in neighboring areas to create new open habitats that may be subsequently colonized by this species.

New insights on electrochemical hydrogen storage in nanoporous carbons by in situ Raman spectroscopy

In situ Raman spectroscopy was exploited to analyze the interaction between carbon and hydrogen during electrochemical hydrogen storage at cathodic conditions. Two different activated carbons were used and characterized by different electrochemical techniques in two electrolytes (6 M KOH and 0.5 M Na2SO4). The in situ Raman spectra collected showed that, in addition to the D and G bands associated to the graphitic carbons, two bands appear simultaneously at about 1110 and 1500 cm−1 under cathodic conditions, and then they disappear when the potential increases to more positive values. This indicates that carbon–hydrogen bonds are formed reversibly in both electrolytes during cathodic conditions. Comparing the two activated carbons, it was confirmed that, in both electrolytes, the hydrogenation of carbon atoms is produced more easily for the sample with lower amount of surface oxygen groups. In KOH medium, for the two samples, the formation of carbon–hydrogen bonds proceeds at more positive potential with respect to the thermodynamic potential value for hydrogen evolution. Furthermore, changes in the shape of the D band (due to an intensity increase of the D1 band) during the formation of carbon–hydrogen bonds suggest that hydrogenation of the carbon atoms increases the number of edge planes.

First EURONEAR NEA discoveries from La Palma using the INT

Since 2006, the European Near Earth Asteroids Research (EURONEAR) project has been contributing to the research of near-Earth asteroids (NEAs) within a European network. One of the main aims is the amelioration of the orbits of NEAs, and starting in 2014 February we focus on the recovery of one-opposition NEAs using the Isaac Newton Telescope (INT) in La Palma in override mode. Part of this NEA recovery project, since 2014 June EURONEAR serendipitously started to discover and secure the first NEAs from La Palma and using the INT, thanks to the teamwork including amateurs and students who promptly reduce the data, report discoveries and secure new objects recovered with the INT and few other telescopes from the EURONEAR network. Five NEAs were discovered with the INT, including 2014 LU14, 2014 NL52 (one very fast rotator), 2014 OL339 (the fourth known Earth quasi-satellite), 2014 SG143 (a quite large NEA), and 2014 VP. Another very fast moving NEA was discovered but was unfortunately lost due to lack of follow-up time. Additionally, another 14 NEA candidates were identified based on two models, all being rapidly followed-up using the INT and another 11 telescopes within the EURONEAR network. They include one object discovered by Pan-STARRS, two Mars crossers, two Hungarias, one Jupiter trojan, and other few inner main belt asteroids (MBAs). Using the INT and Sierra Nevada 1.5 m for photometry, then the Gran Telescopio de Canarias for spectroscopy, we derived the very rapid rotation of 2014 NL52, then its albedo, magnitude, size, and its spectral class. Based on the total sky coverage in dark conditions, we evaluate the actual survey discovery rate using 2-m class telescopes. One NEA is possible to be discovered randomly within minimum 2.8 deg2 and maximum 5.5 deg2. These findings update our past statistics, being based on double sky coverage and taking into account the recent increase in discovery.

On the formation and evolution of the first Be star in a black hole binary MWC 656

We find that the formation of MWC 656 (the first Be binary containing a black hole) involves a common envelope phase and a supernova explosion. This result supports the idea that a rapidly rotating Be star can emerge out of a common envelope phase, which is very intriguing because this evolutionary stage is thought to be too fast to lead to significant accretion and spin up of the B star. We predict ∼10–100 of B-BH binaries to currently reside in the Galactic disc, among which around 1/3 contain a Be star, but there is only a small chance to observe a system with parameters resembling MWC 656. If MWC 656 is representative of intrinsic Galactic Be-BH binary population, it may indicate that standard evolutionary theory needs to be revised. This would pose another evolutionary problem in understanding black hole (BH) binaries, with BH X-ray novae formation issue being the prime example. Future evolution of MWC 656 with an ∼5 M⊙ BH and with an ∼13 M⊙ main-sequence companion on an ∼60 d orbit may lead to the formation of a coalescing BH–NS (neutron star) system. The estimated Advanced LIGO/Virgo detection rate of such systems is up to ∼0.2 yr−1. This empirical estimate is a lower limit as it is obtained with only one particular evolutionary scenario, the MWC 656 binary. This is only a third such estimate available (after Cyg X-1 and Cyg X-3), and it lends additional support to the existence of so far undetected BH–NS binaries.

Orbital Magnetization of Quantum Spin Hall Insulator Nanoparticles

Both spin and orbital degrees of freedom contribute to the magnetic moment of isolated atoms. However, when inserted in crystals, atomic orbital moments are quenched because of the lack of rotational symmetry that protects them when isolated. Thus, the dominant contribution to the magnetization of magnetic materials comes from electronic spin. Here we show that nanoislands of quantum spin Hall insulators can host robust orbital edge magnetism whenever their highest occupied Kramers doublet is singly occupied, upgrading the spin edge current into a charge current. The resulting orbital magnetization scales linearly with size, outweighing the spin contribution for islands of a few nm in size. This linear scaling is specific of the Dirac edge states and very different from Schrodinger electrons in quantum rings. By modeling Bi(111) flakes, whose edge states have been recently observed, we show that orbital magnetization is robust with respect to disorder, thermal agitation, shape of the island, and crystallographic direction of the edges, reflecting its topological protection.

Looking Forward to a Dynamic Third Age - Comparative Survey Report

BALL (Be Active Through Lifelong Learning) is an Erasmus + project of the European Union with the chief objective of analysing the degree of Preparation for Retirement among European citizens. The team working for this project, funded by the EU, is composed by organizations with broad experience at work with the third age from three European countries, Poland, Iceland and Spain, and the results obtained from these three contexts aim to provide a clear picture about the state of the art in preparation for retirement nowadays. The main objective of the project is to develop innovative guidelines and recommendations for use at lifelong learning centres; universities; companies; unions; associations; local and regional authorities who need and wish to prepare and encourage individuals under their auspices to prepare for the third age. The project defines the age group of 50 to 70 (the “baby boomer” generation) as the target group for such early preparations. The project and its outcomes will be used to raise awareness of these important issues and disseminate the results throughout the European Educational Area and the worldwide U3A network.

Warsaw, Poland, 1762 (Image 1 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de la ville de Varsovie : dedie A. S. Mavgvste III roi de Pologne Electevr de Saxe, levé par ordre de S.E. M. le Comte Bielinksi Grand Marechal de la Covronne par M. P. Ricavd de Tirregaille Lieut. Colonel et Inginieur au Service du Roi et de la Repvblique en 1762 ; Marstalski fecit. It was published in 1762. Scale [ca. 1:6,600]. Covers Warsaw, Poland. This layer is image 1 of 4 total images, representing the southwest portion of the four sheet source map. Map in French and Polish. The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone II' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, and more. Relief shown by hachures. Includes index and views. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Warsaw, Poland, 1762 (Image 2 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de la ville de Varsovie : dedie A. S. Mavgvste III roi de Pologne Electevr de Saxe, levé par ordre de S.E. M. le Comte Bielinksi Grand Marechal de la Covronne par M. P. Ricavd de Tirregaille Lieut. Colonel et Inginieur au Service du Roi et de la Repvblique en 1762 ; Marstalski fecit. It was published in 1762. Scale [ca. 1:6,600]. Covers Warsaw, Poland. This layer is image 2 of 4 total images, representing the northwest portion of the four sheet source map. Map in French and Polish. The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone II' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, and more. Relief shown by hachures. Includes index and views. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Warsaw, Poland, 1762 (Image 3 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de la ville de Varsovie : dedie A. S. Mavgvste III roi de Pologne Electevr de Saxe, levé par ordre de S.E. M. le Comte Bielinksi Grand Marechal de la Covronne par M. P. Ricavd de Tirregaille Lieut. Colonel et Inginieur au Service du Roi et de la Repvblique en 1762 ; Marstalski fecit. It was published in 1762. Scale [ca. 1:6,600]. Covers Warsaw, Poland. This layer is image 3 of 4 total images, representing the northeast portion of the four sheet source map. Map in French and Polish. The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone II' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, and more. Relief shown by hachures. Includes index and views. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Warsaw, Poland, 1831 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Warsaw = Warszawa, drawn by W.B. Clarke, Arch. ; engraved by T.E. Nicholson. It was published by Published under the superintendence of the Society for the Diffusion of Useful Knowledge [by] Baldwin & Cradock in 1831. Scale [ca. 1:17,000] Covers Warsaw, Poland. Map in English and Polish.The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone II' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map.This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, city district boundaries, and more. Relief shown by hachures. Includes profile views of selected buildings.This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Warsaw, Poland, 1762 (Image 4 of 4) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de la ville de Varsovie : dedie A. S. Mavgvste III roi de Pologne Electevr de Saxe, levé par ordre de S.E. M. le Comte Bielinksi Grand Marechal de la Covronne par M. P. Ricavd de Tirregaille Lieut. Colonel et Inginieur au Service du Roi et de la Repvblique en 1762 ; Marstalski fecit. It was published in 1762. Scale [ca. 1:6,600]. Covers Warsaw, Poland. This layer is image 4 of 4 total images, representing the southeast portion of the four sheet source map. Map in French and Polish. The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'Pulkovo 1942 Adjust 1958 Poland Zone II' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, built-up areas and selected buildings, fortification, ground cover, and more. Relief shown by hachures. Includes index and views. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Performance of Long-Term Care Systems in Europe. ENEPRI Research Report No. 117, 21 December 2012

This report evaluates the performance of long-term care (LTC) systems in Europe, with a special emphasis on four countries that were selected in Work Package 1 of the ANCIEN project as representative of different LTC systems: Germany, the Netherlands, Spain and Poland. Based on a performance framework, we use the following four core criteria for the evaluation: the quality of life of LTC users, the quality of care, equity of LTC systems and the total burden of LTC (consisting of the financial burden and the burden of informal caregiving). The quality of life is analysed by studying the experience of LTC users in 13 European countries, using data from the Survey of Health, Ageing and Retirement in Europe (SHARE). Older persons with limitations living at home have the highest probability of receiving help (formal or informal) in Germany and the lowest in Poland. Given that help is available, the sufficiency of the help is best ensured in Switzerland, Italy and the Netherlands. The indirectly observed properties of the LTC system are most favourable in France. An older person who considers all three aspects important might be best off living in Belgium or Switzerland. The horizontal and vertical equity of LTC systems are analysed for the four representative countries. The Dutch system scores highest on overall equity, followed by the German system. The Spanish and Polish systems are both less equitable than the Dutch and German systems. To show how ageing may affect the financial burden of LTC, projections until 2060 are given for LTC expenditures for the four representative countries. Under the base scenario, for all four countries the proportions of GDP spent on public and private LTC are projected to more than double between 2010 and 2060, and even treble in some cases. The projections also highlight the large differences in LTC expenditures between the four countries. The Netherlands spends by far the most on LTC. Furthermore, the report presents information for a number of European countries on quality of care, the burden of informal caregiving and other aspects of performance. The LTC systems for the four representative countries are evaluated using the four core criteria. The Dutch system has the highest scores on all four dimensions except the total burden of care, where it has the second-best score after Poland. The German system has somewhat lower scores than the Dutch on all four dimensions. The relatively large role for informal care lowers the equity of the German system. The Polish system excels in having a low total burden of care, but it scores lowest on quality of care and equity. The Spanish system has few extreme scores. Policy implications are discussed in the last chapter of this report and in the Policy Brief based on this report.