Sobre uma nova espécie de Phoniomyia (Diptera: Culicidae) do Rio de Janeiro, Brasil

Phoniomyia deanei sp.n. (Diptera: Culicidae) é descrita no presente trabalho a partir de adultos fêmea e macho procedentes de Jacarepaguá, Rio de Janeiro, Estado do Rio de Janeiro, Brasil. Esta espécie aproxima-se de Ph. bonnei Lane & Cerqueira, 1942, porém é facilmente separada pelos caracteres da genitália masculina, particularmente pelas cerdas do basistilo.

The distribution of two morphological forms of Lutzomyia longipalpis (Lutz & Neiva) (Diptera: Psychodidae)

The males of the sandfly Lutzomyia longipalpis occur in two forms, one which bears a single pair of pale spots on tergite 4 and another in which an additional pair of spots characterizes tergite 3. Almost complete reproductive isolation between sumpatric populations of the two forms and between allopatric populations of the one-spot form has been reported (Ward et al., 1983). Micromorphological differences in cuticular structures on the spots have also been observed and may be sites of pheromone release (Lane & Ward, 1984). Detais of the known distribution of the two are based on the examination of new specimens captured in Brazil during 1982, as well as museum collections and specimens from other laboratories. Males with a single pair of pale spots have been found from Mexico to southern Brazil, whilst the two-spot form is found only from the state of Maranhão in North Brazil to Minas Gerais and the border with Paraguay. In the eastern area of Brazil the two forms occur sympatrically in some locations and separately in others.

Análisis y diseño de un procesador RISC simple para adquisición y proceso de datos

Aquest projecte té com a objectiu l'anàlisi de prestacions de processadors RISC de baix cost i el disseny d'un processador RISC simple per a aplicacions de propòsit general relacionades amb l'adquisició i el procés simple de dades. Com a resultat es presenta el processador SR3C de 32 bits i arquitectura RISC. Aquest processador s'ha descrit i simulat mitjançant el llenguatge de descripció de hardware VHDL i s'ha sintetitzat en una FPGA. El processador està preparat per poder utilitzar-se en SoCs reals gràcies al compliment de l'estàndard de busos Wishbone. A més també es pot utilitzar com plataforma educativa gràcies a l'essamblador i simulador desenvolupats.

Vie professionnelle et vie familiale et sociale : une gestion du temps et de la fatigue

Sur la base d'une enquête de terrain, les auteures abordent la nécessité de repenser la division du travail tant sur le plan du travail professionnel, que domestique. Elles s'appuient sur l'expérience des TL (transports lausannois) qui ont mis en place une nouvelle gestion des horaires permettant aux conducteurs d'avoir une assez grande latitude sur leurs itinéraires des bus. Le taux d'absentéisme alarmant avait inquiété les dirigeants qui s'attachaient à faire le tour de solutions à même de réduire la fatigue des collaborateurs. Les effets indirects de cette innovation managériale a été de permettre une véritable conciliation vie privée-vie professionnelle avec, cependant, comme effet non voulu un clivage entre anciens et nouveaux - les anciens ayant priorité quant au choix d'itinéraire. Les femmes, minoritaires dans le métier, ont du mal à faire entendre leur voix pour un système qui va clairement dans le sens d'une double activité facilitée. [Auteurs]

Oxidative potential for fine/ultrafine particles in occupational situations

Introduction : The redox properties of fine/ultrafine particles as well as nanoparticles (NP) are suggested to be important to explain their biological activity and could constitute a novel and promising metric for hazard evaluation. The acellular in vitro dithiothreitol (DTT) assay allows measuring this property. Objectives : (1) to evaluate sampling requirements for fine/ultrafine particle allowing measurement of their oxidative potential (2) to apply the methodology to occupational situations where particle from combustion sources are generated. Material and method : Sampling parameters (type of filters and loaded amount) and storage duration affecting the DTT measurements were evaluated. Based on these results, a methodological approach was defined and applied in two occupational situations where diesel and other combustion particles are present (toll station in a tunnel and mechanical yard for bus reparation). Results : Teflon filters loaded with diesel particles were found more suitable for the DTT assay, due to their better chemical inertness compared to quartz filters: after storage durations larger than 150 hours, an increased reactivity toward DTT was observed only with quartz filters. Reactivity was linearly correlated to the loaded mass until about 1000 μg/filter. Different redox reactivities were determined in both working places, with the mechanical yard presenting a higher DTT consumption rate. Discussion and conclusions : These results demonstrate the feasibility of this method to determine the oxidative potential of fine/ultrafine particles in occupational situations. We propose to include this approach for hazard assessment of work places with exposure to manufactured and other NP.

Prevalence of frailty indicators and association with socioeconomic status in middle-aged and older adults in a swiss region with universal health insurance coverage : a population-based cross-sectional study

Frailty prevalence in older adults has been reported but is largely unknown in middle-aged adults. We determined the prevalence of frailty indicators among middle-aged and older adults from a general Swiss population characterized by universal health insurance coverage and assessed the determinants of frailty with a special focus on socioeconomic status. Participants aged 50 and more from the population-based 2006-2010 Bus Santé study were included (N = 2,930). Four frailty indicators (weakness, shrinking, exhaustion, and low activity) were measured according to standard definitions. Multivariate logistic regressions were used to determine associations. Overall, 63.5%, 28.7%, and 7.8% participants presented no frailty indicators, one frailty indicator, and two or more frailty indicators, respectively. Among middle-aged participants (50-65 years), 75.1%, 22.2%, and 2.7% presented 0, 1, and 2 or more frailty indicators. The number of frailty indicators was positively associated with age, hypertension, and current smoking and negatively associated with male gender, body mass index, waist-to-hip ratio, and serum total cholesterol level. Lower income level but not education was associated with higher number of frailty indicators. Frailty indicators are frequently encountered in both older and middle-aged adults from the Swiss general population. Despite universal health insurance coverage, household income is independently associated with frailty.

CD28/CTLA4-B7 interaction is dispensable for T cell stimulation by mouse mammary tumor virus superantigen but not for B cell differentiation and virus dissemination.

B cells are the primary targets of infection for mouse mammary tumor virus (MMTV). However, for productive retroviral infection, T cell stimulation through the virally-encoded superantigen (SAG) is necessary. It activates B cells and leads to cell division and differentiation. To characterize the role of B cell differentiation for the MMTV life cycle, we studied the course of infection in transgenic mice deficient for CD28/CTLA4-B7 interactions (mCTLA4-H gamma 1 transgenic mice). B cell infection occurred in CTLA4-H gamma 1 transgenic mice as integrated proviral DNA could be detected in draining lymph node cells early after infection by polymerase chain reaction analysis. In mice expressing I-E, B cells were able to present the viral SAG efficiently to V beta 6+ T cells. These cells expanded specifically and were triggered to express the activation marker CD69. Further stages of progression of infection appeared to be defective. Kinetics experiments indicated that T and B cell stimulation stopped more rapidly than in control mice. B cells acquired an activated CD69+ phenotype, were induced to produce IgM but only partially switched to IgG secretion. Finally, the dissemination of infected cells to other lymph nodes and spleen was reduced and the peripheral deletion of V beta 6+ T cells was minimal. In contrast, in mice lacking I-E, T cell stimulation was also impaired and B cell activation undetectable. These data implicate B7-dependent cellular interactions for superantigenic T cell stimulation by low-affinity TCR ligands and suggest a role of B cell differentiation in viral dissemination and peripheral T cell deletion.

New brazilian predaceous midges of the genus Monohelea Kieffer, and redescription of M. guaimiesi (Diptera: Ceratopogonidae)

Two new Brazilian species of Monohelea Kieffer, M. affinis and M. roraimensis are described and illustrated, and a redescription of M. guiaimiesi Lane & Wirth is given.

Disseny d'un adaptador d'IPs per a NoCs tolerants a falles

L’aparició d’un nou paradigma per al disseny de sistemes multiprocessador, les NoC; requereixen una manera d’adaptar els IP cores ja existents i permetre la seva connexió en xarxa. Aquest projecte presenta un disseny d’una interfície que aconsegueix adaptar un IP core existent, el LEON3; del protocol del bus AMBA al protocol de la xarxa. D’aquesta manera i basant-nos en idees d’interfícies discutides en l’estat de l’art, aconseguim desacoblar el processador del disseny i topologia de la xarxa.

High-resolution numerical modelling of flow-vegetation interactions

In this paper, we present and apply a new three-dimensional model for the prediction of canopy-flow and turbulence dynamics in open-channel flow. The approach uses a dynamic immersed boundary technique that is coupled in a sequentially staggered manner to a large eddy simulation. Two different biomechanical models are developed depending on whether the vegetation is dominated by bending or tensile forces. For bending plants, a model structured on the Euler-Bernoulli beam equation has been developed, whilst for tensile plants, an N-pendula model has been developed. Validation against flume data shows good agreement and demonstrates that for a given stem density, the models are able to simulate the extraction of energy from the mean flow at the stem-scale which leads to the drag discontinuity and associated mixing layer.

Laboratori Assistit per Ordinador mitjançant eines ofimàtiques convencionals

El projecte "Laboratori Asssit per Ordinador Mitjançant Eines Ofimàtiques Convencionals" ha estat realitzat en la facultat de Física de la Universitat de Barcelona durant els anys 2007 i 2008 (projecte biennal). El principal objectiu d’aquest projecte és demostrar la possibilitat d’utilitzar les eines informàtiques més habituals en la realització d’experiències de laboratori assistit per ordinador (LAO). En particular, es proposa la utilització del Excel © juntament amb les seves macros (Visual Basic para Aplicacions, VBA) en pràctiques de laboratori d’assignatures en l’àrea de Física Aplicada. Excel és un full de càlcul molt conegut i usat tant per professors com pels estudiants. En aquest treball mostrem exemples concrets que abasten les diferents tècniques de control i adquisició de dades: programació del port sèrie (RS- 232) i paral·lel, i interfase GPIB. La implementació d’aquestes tècniques es realitza mitjançant macros VBA de Excel. La resta de programació de l’aplicació LAO, la representació gràfica i el tractament de les dades, es realitza de forma molt simple a partir del maneig habitual d’un full de càlcul. La realització del projecte ha demostrat la conveniència d’aquesta metodologia. Actualment pràcticament la totalitat de les pràctiques LAO de les quals és responsable el Departament de Física Aplicada utilitzen la programació a través del full de càlcul. La resposta dels estudiants ha estat molt positiva. La combinació de les característiques d’aquesta eina juntament amb la programació VBA té un enorme potencial i representa, probablement, una forma senzilla d’introduir tant a l’alumne com al professor en el món de la programació.

Entorno gráfico de configuración para el soft-core OpenRISC

Aquest projecte consisteix en la realització d'un entorn gràfic que serveixi per generar SoCs basats en el processador soft-core OpenRISC. Aquest entorn permetrà afegir diferents components de manera dinàmica a un repositori d’IPs, mostrar i sel·leccionar qualsevol component disponible dins d’aquest repositori, amb la finalitat d’unir-los al bus del sistema i fer-los accessibles al processador OpenRISC. L’entorn també mostrarà en tot moment com va evolucionant el nostre SoC, guardarà cadascún dels projectes que es realitzen amb aquest entorn i finalment permetrà generar el SoC dissenyat.

Application of a roughness-length representation to parameterize energy loss in 3-D numerical simulations of large rivers

Recent technological advances in remote sensing have enabled investigation of the morphodynamics and hydrodynamics of large rivers. However, measuring topography and flow in these very large rivers is time consuming and thus often constrains the spatial resolution and reach-length scales that can be monitored. Similar constraints exist for computational fluid dynamics (CFD) studies of large rivers, requiring maximization of mesh-or grid-cell dimensions and implying a reduction in the representation of bedform-roughness elements that are of the order of a model grid cell or less, even if they are represented in available topographic data. These ``subgrid'' elements must be parameterized, and this paper applies and considers the impact of roughness-length treatments that include the effect of bed roughness due to ``unmeasured'' topography. CFD predictions were found to be sensitive to the roughness-length specification. Model optimization was based on acoustic Doppler current profiler measurements and estimates of the water surface slope for a variety of roughness lengths. This proved difficult as the metrics used to assess optimal model performance diverged due to the effects of large bedforms that are not well parameterized in roughness-length treatments. However, the general spatial flow patterns are effectively predicted by the model. Changes in roughness length were shown to have a major impact upon flow routing at the channel scale. The results also indicate an absence of secondary flow circulation cells in the reached studied, and suggest simpler two-dimensional models may have great utility in the investigation of flow within large rivers. Citation: Sandbach, S. D. et al. (2012), Application of a roughness-length representation to parameterize energy loss in 3-D numerical simulations of large rivers, Water Resour. Res., 48, W12501, doi: 10.1029/2011WR011284.

Purification and characterization of (Na+ + K+)-ATPase from toad kidney

This report describes the partial purification and the characteristics of (Na+ + K+)-ATPase (ATP phosphohydrolase, EC 3.6.1.3) from an amphibian source. Toad kidney microsomes were solubilized with sodium deoxycholate and further purified by sodium dodecyl sulphate treatment and sucrose gradient centrifugation, according to the methods described by Lane et al. [(1973) J. Biol. Chem. 248, 7197--7200], Jørgensen [(1974) Biochim. Biophys. Acta 356, 36--52] and Hayashi et al. [(1977) Biochim. Biophys. Acta 482, 185--196]. (Na+ + K+)-ATPase preparations with specific activities up to 1000 mumol Pi/mg protein per h were obtained. Mg2+-ATPase only accounted for about 2% of the total ATPase activity. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis revealed three major protein bands with molecular weights of 116 000, 62 000 and 26 000. The 116 000 dalton protein was phosphorylated by [gamma-32P]ATP in the presence of sodium but not in the presence of potassium. The 62 000 dalton component stained for glycoproteins. The Km for ATP was 0.40 mM, for Na+ 12.29 mM and for K+ 1.14 mM. The Ki for ouabain was 35 micron. Temperature activation curves showed two activity peaks at 37 degrees C and at 50 degrees C. The break in the Arrhenius plot of activity versus temperature appeared at 15 degrees C.