High Plains Ag Lab Rotations Show Fallow Still Works in Western Nebraska

The High Plains Ag Laboratory (HPAL) in Sidney, Nebraska is the dryland research site for the University of Nebraska located in the Panhandle. In addition to the typical small plot agriculture experiment areas, there is a significant dryland production area. There are a total of 718.5 acres in production, divided into 27 individual fields, ranging from the smallest unit at 19.7 acres to the largest at 36.7 acres. Within these fields there are presently seven different crop rotations, each with winter wheat as the base crop, including everything from the traditional wheat-fallow system to a continuous cropping system.

The influence of B4C and MgB2 additions on the behavior of MgO-C bricks

Carbon-containing refractory materials have received great attention over the last years due to their importance in the steelmaking process. The oxidation of carbon present in refractory materials at temperatures above 500 degrees C is usually accompanied by the decrease of their mechanical strength and chemical resistance. Aiming to improve the oxidation resistance of carbon-oxide refractories, the use of materials known as antioxidants has been extensively studied. In this work we evaluated the performance of MgB2 and B4C antioxidants when incorporated into MgO-C bricks. We observed that the co-addition of metallic antioxidants and B4C or MgB2 leads to refractory bricks with enhanced hot modulus of rupture and resistance against oxidation and slag corrosion. However, the excessive addition of these antioxidants could impair the performance of the obtained bricks. Thus, when determining the optimum concentration of MgB2 and B4C to be added into MgO-C refractories, one must take into consideration this behavior. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Tailoring the structure, composition, optical properties and catalytic activity of Ag-Au nanoparticles by the galvanic replacement reaction

This Letter reports on the synthesis of Ag-Au nanoparticles (NPs) with controlled structures and compositions via a galvanic replacement reaction between Ag NPs and AuCl4(aq)- followed by the investigation of their optical and catalytic properties. Our results showed the formation of porous walls, hollow interiors and increased Au content in the Ag-Au NPs as the volume of AuCl4(aq)- employed in the reaction was increased. These variations led to a red shift and broadening of the SPR peaks and an increase of up to 10.9-folds in the catalytic activity towards the reduction of 4-nitrophenol relative to Ag NPs. (C) 2012 Elsevier B.V. All rights reserved.

Development and Evaluation of a Pseudoreference Pt//Ag/AgCl Electrode for Electrochemical Systems

The use of standard reference electrodes, such as Ag/AgCl or saturated calomel electrodes, in potentiometric and amperometric studies involving miniaturized electrochemical systems, or those operating under positive hydraulic pressure, is often impractical. Placement of the reference electrode in the direct vicinity of the working electrode is often prohibited by the dimensions or layout of the electrochemical cell, while the alternative strategy of locating the reference electrode in a separate compartment often leads to electrolyte leakage and contamination of the system. In the present study, we have investigated the functionality of a pseudoreference electrode comprising a platinum wire, one end of which was maintained in intimate contact with the internal solution of an Ag/AgCl reference electrode while the other was connected, via a BNC connector, to a platinum probe located within the electrochemical cell. Linear and cyclic voltammetric studies, involving both aqueous and nonaqueous electrolytes, were carried out using the pseudoreference electrode and an electrochemical cup-type cell with three electrodes or an electrochemical flow reactor. In all cases, the functionality of the Pt//Ag/AgCl system was similar to that of a conventional Ag/AgCl reference electrode. Variations in the electrolyte did not alter the potential or voltammetric profile recorded when using the pseudoreference system, although peak currents were generally improved and potential values shifted by approximately +350 mV in comparison with the Ag/AgCl electrode, therefore, the system pseudoreference can be applied in any electrochemical system due to the constant potential difference. It is concluded that the pseudoreference electrode can be used with advantage to obtain potentiometric and amperometric measurements in both simple and complex electrochemical systems.

Efficient plasmonic coupling between Er3+:(Ag/Au) in tellurite glasses

We report a systematic study of the localized surface plasmon resonance effects on the photoluminescence of Er3+-doped tellurite glasses containing Silver or Gold nanoparticles. The Silver and Gold nanoparticles are obtained by means of reduction of Ag ions (Ag+ -> Ag-0) or Au ions (Au3+ -> Au-0) during the melting process followed by the formation of nanoparticles by heat treatment of the glasses. Absorption and photoluminescence spectra reveal particular features of the interaction between the metallic nanoparticles and Er3+ ions. The photoluminescence enhancement observed is due to dipole coupling of Silver nanoparticles with the I-4(13/2) -> I-4(15/2) Er3+ transition and Gold nanoparticles with the H-2(11/2)-> I-4(13/2) (805 nm) and S-4(3/2) -> I-4(13/2) (840 nm) Er3+ transitions. Such process is achieved via an efficient coupling yielding an energy transfer from the nanoparticles to the Er3+ ions, which is confirmed from the theoretical spectra calculated through the decay rate. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

Optical and thermal investigation of GeO2-PbO thin films doped with Au and Ag nanoparticles

The present work reports on the thermo-optical study of germanate thin films doped with Au and Ag nanoparticles. Transmission Electron Microscopy images, UV-visible absorption and Micro-Raman scattering evidenced the presence of nanoparticles and the formation of collective excitations, the so called surface plasmons. Moreover, the effects of the metallic nanoparticles in the thermal properties of the films were observed. The thermal lens technique was proposed to evaluate the Thermal Diffusivity (D) of the samples. It furnishes superficial spatial resolution of about 100 mu m, so it is appropriate to study inhomogeneous samples. It is shown that D may change up to a factor 3 over the surface of a film because of the differences in the nanoparticles concentration distribution. (C) 2011 Elsevier B.V. All rights reserved.

Straightforward Synthesis of Carbon-Supported Ag Nanoparticles and Their Application for the Oxygen Reduction Reaction

In this paper we report a simple and environmentally friendly synthesis of silver nanoparticles (AgNps) and their activities towards the oxygen reduction reaction (ORR). Ultraviolet spectroscopy (UV-vis) and transmission electron microscopy confirmed the formation of poly(vinyl pyrrolidone)-protected colloidal AgNps through direct reduction of Ag+ by glycerol in alkaline medium at room temperature. For the ORR tests, the AgNps were directly produced onto carbon to yield the Ag/C catalyst. Levich plots revealed the process to occur via 2.7 electrons, suggesting that the carbon support contributes to the ORR. We discuss here possibilities of improving the catalytic properties of the Ag/C for ORR by optimizing the parameters of the synthesis.

A broad study of two new promising antimycobacterial drugs: Ag(I) and Au(I) complexes with 2-(2-thienyl)benzothiazole

Synthesis, characterization, DFT simulation and biological assays of two new metal complexes of 2-(2-thienyl)benzothiazole - BTT are reported. The complexes [Ag(BTT)(2)NO3] - AgBTT2 and [Au(BTT)Cl]center dot 1/2H(2)O - AuBTT were obtained by mixing the ligand with silver (I) nitrate or gold(I) chloride in methanolic solution. Characterization of the complexes were based on elemental (C, H, N and S), thermal (TG-DTA) analysis, C-13 and H-1 NMR, FT-IR and UV-Vis spectroscopic measurements, as well as the X-ray structure determination for AgBTT2. Spectroscopic data predicted by DFT calculations were in agreement with the experimental data for both complexes. The ligand BTT was synthesized by the condensation of 2-thiophenecarboxaldehyde and 2-aminothiophenol in a microwave furnace. AgBTT2 has a monomeric structure. Both complexes show a good activity against Mycobacterium tuberculosis. Free BIT shows low antitubercular activity. (C) 2012 Elsevier Ltd. All rights reserved.

Ausbreitung von Nitroaromaten über das Sickerwasser der ehemaligen Espagit AG in Hallschlag

Die in den Jahren 1915-1923 erfolgte Produktion von Sprengstoffen und Vernichtung von Munition am Rüstungsaltstandort Hallschlag (Eifel) führte zu einer Nitroaromatenbelastung des Bodens, die bis heute nachgewiesen werden kann. Im Rahmen vorliegender Studie wurde das Sickerwasser außerhalb des Schadensherdes über einen Zeitraum von rund zwei Jahren mit Saugkerzensystemen beprobt und auf Nitroaromaten untersucht. Weiterhin wurde die klimatische Wasserbilanz für den Standort berechnet und Pegeldaten einer im Rahmen der Standortsicherung errichteten Sickerwassersammelleitung ausgewertet. Mit Hilfe dieses Datenmaterials konnte die mittlere Nitroaromatenkonzentration im Sickerwasser innerhalb und außerhalb des Schadensherdes ermittelt und die im hydrologischen Jahr 2004 ausgetragene Nitroaromatenmenge abgeschätzt werden.

Additions- und Umlagerungsreaktionen des Lewis-aciden Dihypersilylplumbandiyls in Umsetzungen mit monodenten und ambidenten Lewis-Basen

Die chemische Reaktivität des Dihypersilylplumbylens Pb[Si(Si(CH3)3)3]2 wird durch seine besondere elektronische Struktur bestimmt. Im Unterschied zu Carbenen (Triplett-Grundzustand) liegen Plumbylene im Grundzustand als Singulett vor, mit einem energetisch hochliegenden HOMO (freies Elektronenpaar mit hohem s-Charakter) und einem tiefliegenden LUMO (näherungsweise: freies p-Orbital des Pb-Atoms). Daraus resultiert das amphotere Lewis-Säure/Lewis-Base-Verhalten der Verbindung, mit der Besonderheit, dass sich die beiden Lewis-Zentren am selben Atom befinden. rnIn Umsetzungen mit monodenten und ambidenten Lewis-Basen wurden die Lewis-aciden Eigenschaften des Dihypersilylplumbandiyls Pb[Si(Si(CH3)3)3]2 untersucht. Reaktionen mit den sterisch anspruchsvollen O-Nucleophilen KOtBu (Kalium-tert-Butanolat) und KOiPrPh (4-Kaliumisopropylphenolat) führten bei tiefen Temperaturen zur primären Adduktbildung. Die aus der Strukturanalyse erhaltenen Bindungsdaten zeigen die extreme sterische Überfrachtung des zentralen Blei-Atoms. Der Abbau der sterischen Spannung ist möglicherweise die Ursache für offensichtlich stattfindende Umlagerungsfolgereaktionen (bei Reaktionsführungen bei T>-60°C), die aufgrund spektroskopische Untersuchungen zu vermuten sind.rnEingehender wurden diese Umlagerungsreaktionen in Umsetzungen des Pb[Si(Si(CH3)3)3]2 mit ambidenten Lewis-Basen untersucht. In Übereinstimmung und Erweiterung mit früheren Ergebnissen von Klinkhammer (K. Klinkhammer, Polyhedron, 2002, 21, 587) konnte beispielsweise die Migration einer (mit der ambidenten Lewis-Base tert-Butylisonitril) bzw. beider Hypersilylgruppen (mit p-Tolylisocyanat) unter Bildung hetero- bzw. homoleptischer Plumbylene nachgewiesen werden.rnReaktionen des Pb[Si(Si(CH3)3)3]2 mit den anorganischen ambidenten Salz-Ionen CN-, OCN-, SCN-, N3-, NO2- führen zur Bildung salzartiger Plumbanide der Zusammensetzung Me{Pb[Si(Si(CH3)3)3]2}Nu (Me: Na bzw. K, Nu: CN, OCN, SCN, N3, NO2). Die Verbindungen liegen im Kristall monomer als Kontaktionenpaar vor. Auf diese Weise gelang erstmalig die gezielte Synthese eines Blei(II)cyanids sowie die Darstellung eines Blei(II)isocyanats. rn

Tailoring properties and functionalities of TiO2 and Ag nanoparticles involved in surfaces engineering processes

The functionalization of substrates through the application of nanostructured coatings allows to create new materials, with enhanced properties. In this work, the development of self-cleaning and antibacterial textiles, through the application of TiO2 and Ag based nanostructured coatings was carried out. The production of TiO2 and Ag functionalized materials was achieved both by the classical dip-padding-curing method and by the innovative electrospinning process to obtain nanofibers doped with nano-TiO2 and nano-Ag. In order to optimize the production of functionalized textiles, the study focused on the comprehension of mechanisms involved in the photocatalytic and antibacterial processes and on the real applicability of the products. In particular, a deep investigation on the relationship between nanosol physicochemical characteristics, nanocoating properties and their performances was accomplished. Self-cleaning textiles with optimized properties were obtained by properly purifying and applying commercial TiO2 nanosol while the studies on the photocatalytic mechanism operating in self-cleaning application demonstrated the strong influence of hydrophilic properties and of interaction surface/radicals on final performance. Moreover, a study about the safety in handling of nano-TiO2 was carried out and risk remediation strategies, based on “safety by design” approach, were developed. In particular, the coating of TiO2 nanoparticles by a SiO2 shell was demonstrated to be the best risk remediation strategy in term of biological response and preserving of photoreactivity. The obtained results were confirmed determining the reactive oxygen species production by a multiple approach. Antibacterial textiles for biotechnological applications were also studied and Ag-coated cotton materials, with significant anti-bacterial properties, were produced. Finally, composite nanofibers were obtained merging biopolymer processing and sol-gel techniques. Indeed, electrospun nanofibers embedded with TiO2 and Ag NPs, starting from aqueous keratin based formulation were produced and the photocatalytic and antibacterial properties were assessed. The results confirmed the capability of electrospun keratin nanofibers matrix to preserve nanoparticle properties.