Effect of quantum interference on a three-level atom driven by two laser fields

We study the effect of quantum interference on the population distribution and absorptive properties of a V-type three-level atom driven by two lasers of unequal intensities and different angular frequencies. Three coupling configurations of the lasers to the atom are analysed: (a) both lasers coupled to the same atomic transition, (b) each laser coupled to different atomic transition and (c) each laser coupled to both atomic transitions. Dressed stales for the three coupling configurations are identified, and the population distribution and absorptive properties of the weaker field are interpreted in terms of transition dipole moments and transition frequencies among these dressed states. In particular, we find that in the first two cases there is no population inversion between the bare atomic states, but the population can be trapped in a superposition of the dressed states induced by quantum interference and the stronger held. We show that the trapping of the population, which results from the cancellation of transition dipole moments, does not prevent the weaker field to be coupled to the cancelled (dark) transitions. As a result, the weaker field can be strongly amplified on transparent transitions. In the case of each laser coupled to both atomic transitions the population can be trapped in a linear superposition of the excited bare atomic states leaving the ground state unpopulated in the steady state. Moreover, we find that the absorption rate of the weaker field depends on the detuning of the strong field from the atomic resonances and the splitting between the atomic excited states. When the strong held is resonant to one of the atomic transitions a quasi-trapping effect appears in one of the dressed states. In the quasi-trapping situation all the transition dipole moments are different from zero, which allows the weaker field to be amplified on the inverted transitions. When the strong field is tuned halfway between the atomic excited states, the population is completely trapped in one of the dressed states and no amplification is found for the weaker field.

Non-Markovian homodyne-mediated feedback on a two-level atom: a quantum trajectory treatment

Quantum feedback can stabilize a two-level atom against decoherence (spontaneous emission), putting it into an arbitrary (specified) pure state. This requires perfect homodyne detection of the atomic emission, and instantaneous feedback. Inefficient detection was considered previously by two of us. Here we allow for a non-zero delay time tau in the feedback circuit. Because a two-level atom is a non-linear optical system, an analytical solution is not possible. However, quantum trajectories allow a simple numerical simulation of the resulting non-Markovian process. We find the effect of the time delay to be qualitatively similar to chat of inefficient detection. The solution of the non-Markovian quantum trajectory will not remain fixed, so that the time-averaged state will be mixed, not pure. In the case where one tries to stabilize the atom in the excited state, an approximate analytical solution to the quantum trajectory is possible. The result, that the purity (P = 2Tr[rho (2)] - 1) of the average state is given by P = 1 - 4y tau (where gamma is the spontaneous emission rate) is found to agree very well with the numerical results. (C) 2001 Elsevier Science B.V. All rights reserved.

A many-core co-processor for embedded parallel computing on FPGA

Single processor architectures are unable to provide the required performance of high performance embedded systems. Parallel processing based on general-purpose processors can achieve these performances with a considerable increase of required resources. However, in many cases, simplified optimized parallel cores can be used instead of general-purpose processors achieving better performance at lower resource utilization. In this paper, we propose a configurable many-core architecture to serve as a co-processor for high-performance embedded computing on Field-Programmable Gate Arrays. The architecture consists of an array of configurable simple cores with support for floating-point operations interconnected with a configurable interconnection network. For each core it is possible to configure the size of the internal memory, the supported operations and number of interfacing ports. The architecture was tested in a ZYNQ-7020 FPGA in the execution of several parallel algorithms. The results show that the proposed many-core architecture achieves better performance than that achieved with a parallel generalpurpose processor and that up to 32 floating-point cores can be implemented in a ZYNQ-7020 SoC FPGA.

Printed electronics for ubiquitous computing applications

Dissertação para obtenção do Grau de Doutor em Química

Minimal computation structures for visual information applications based on printed electronics

In the early nineties, Mark Weiser wrote a series of seminal papers that introduced the concept of Ubiquitous Computing. According to Weiser, computers require too much attention from the user, drawing his focus from the tasks at hand. Instead of being the centre of attention, computers should be so natural that they would vanish into the human environment. Computers become not only truly pervasive but also effectively invisible and unobtrusive to the user. This requires not only for smaller, cheaper and low power consumption computers, but also for equally convenient display solutions that can be harmoniously integrated into our surroundings. With the advent of Printed Electronics, new ways to link the physical and the digital worlds became available. By combining common printing techniques such as inkjet printing with electro-optical functional inks, it is starting to be possible not only to mass-produce extremely thin, flexible and cost effective electronic circuits but also to introduce electronic functionalities into products where it was previously unavailable. Indeed, Printed Electronics is enabling the creation of novel sensing and display elements for interactive devices, free of form factor. At the same time, the rise in the availability and affordability of digital fabrication technologies, namely of 3D printers, to the average consumer is fostering a new industrial (digital) revolution and the democratisation of innovation. Nowadays, end-users are already able to custom design and manufacture on demand their own physical products, according to their own needs. In the future, they will be able to fabricate interactive digital devices with user-specific form and functionality from the comfort of their homes. This thesis explores how task-specific, low computation, interactive devices capable of presenting dynamic visual information can be created using Printed Electronics technologies, whilst following an approach based on the ideals behind Personal Fabrication. Focus is given on the use of printed electrochromic displays as a medium for delivering dynamic digital information. According to the architecture of the displays, several approaches are highlighted and categorised. Furthermore, a pictorial computation model based on extended cellular automata principles is used to programme dynamic simulation models into matrix-based electrochromic displays. Envisaged applications include the modelling of physical, chemical, biological, and environmental phenomena.

Molecular mechanisms and effects of a rasgap-derived peptide on metastatic progression

Cancer is the second leading cause of mortality worldwide. Cancer progression leads to metastasis formation, which accounts for more than ninety percent of cancer-related death. Metastases are more difficult to be surgically removed because of their invasive behavior and shape. In addition, during their transformation journey, they become more and more resistant to anticancer drugs. Significant improvements have been achieved in therapy against cancer in recent years but targeting the metastatic cascade remains the Achilles heel of the cure against cancer. A First step in the metastatic process is the escape of cancer cells from the primary tumor site. This involves an increase in cell motility and the concomitant ability to clear a path through the extracellular matrix. From a therapeutic point of view, inhibition of cell migration is a logical approach to develop anti-metastatic drugs. Our lab previously developed a cell permeable peptide derived from a caspase-3-generaied fragment of the RasGAP protein called TAT-RasGAP317-326. This peptide efficiently and specifically sensitizes cancer cells to chemotherapy- and radiotherapy-induced ceil death, which allows decreasing the anticancer drug doses and eventually their associated side- effects. In the present study we discovered that TAT-RasGAP317.326 also increases cell adhesion which was associated with inhibition of cell migration and invasion into the extracellular matrix. The ability of TAT-RasGAP317.326 to increase ceil adhesion involves the dramatic depolymerization of actin cytoskekton together with redistribution of focal adhesions. We found that the inhibitory effects on migration were mediated by a RhoGAP tumor and metastasis suppressor cailed DLC1 (Deleted in Liver Cancer 1). Moreover. DEC 1 was found to be a direct RasGAP-interacting protein and this interaction requires the RasGAP tryptophan 317 residue, the very first RasGAP residue of TAT-RasGAP317.326. We then evaluated the roie of RasGAP fragments in the in vivo metastatic cascade. We found that breast cancer cells overexpressing the parental RasGAP fragment, to which the TAT-RasGAP317.326 peptide belongs, have a markedly decreased ability to form lung metastases. Unfortunately, we were not able to recapitulate these an ti-metastatic effects when TAT-RasGAP317.326 was injected. However, we later understood that this was due to the fact that TAT-RasGAP317.326 was not properly delivered to the primary tumors. Further work, aimed at better understanding of how TAT-RasGAP317.326 functions, revealed that the ten amino acid TAT-RasGAP317.326 peptide could, be narrowed down to a three amino acid TAT-RasGAP317.329 peptide while keeping its sensitizer activity. In parallel, investigations on the RasGAP-DLCl binding indicated that the arginine linger of the DLC1 GAP domain is required for this interaction, which suggests that TAT-RasGAP317.326 modulates the GAP activity of DLC1. Additional work should be performed to fully elucidate its mechanism of action and render TAT-RasGAP317.326 usable as a tool to fight cancer on two fronts, by improving chemotherapy and preventing metastatic progression. - Le cancer est la deuxième cause de mortalité dans le monde. La formation de métastases est la dernière étape de la progression cancéreuse et représente plus du nonante pour cent des morts induites par le cancer. De par leur morphologie et comportement invasifs, ii est difficile d'avoir recours à la chirurgie pour exciser des métastases. De plus, les cellules cancéreuses en progression deviennent souvent de plus en plus résistantes aux drogues anticancéreuses. Ces dernières années, des avancements significatifs ont contribué à l'amélioration de la lutte contre le cancer. Néanmoins, pouvoir cibler spécifiquement la cascade métastatique demeure cependant le talon d'Achille des thérapies anticancéreuses. Une première étape dans ie processus métastatique est l'évasion des cellules cancéreuses du site de la tumeur primaire. Ceci requiert une augmentation de la motiliié cellulaire couplée à la capacité de se frayer un chemin au sein de la matrice extracelluiaire. D'un point de vue thérapeutique, inhiber la migration cellulaire est une approche attrayante. Notre laboratoire a développé un peptide, nommé TAT-RasGAP317.326 dérivé d'un fragment qui est lui-même le résultat du clivage de la protéine RasGAP par la caspase-3. Ce peptide est capable de pénétrer les cellules cancéreuses et de les sensibiliser spécifiquement à la mort induite par la radiothérapie et la chimiothérapie. La finalité des effets de ce peptide est de pouvoir diminuer les doses des traitements anti-cancéreux et donc des effets secondaires qu'ils engendrent. Dans cette étude, nous avons découvert que TAT-RasGAP317.326 augmente l'adhésion des cellules et inhibe la migration cellulaire ainsi que l'invasion des cellules à travers une matrice extracellulaire. La capacité de TAT-RasGAP317.326 à induire l'adhésion repose sur ia dépolymérisation du cytosquelette d'actine associée à une redistribution des points d'ancrage cellulaire. Nous avons découvert que l'inhibition de ia migration par TAT-RasGAP317.326 nécessitait la présence d'un suppresseur de tumeur et de métastases appelé DLC1 (Deleted in Liver Cancer l), qui par ailleurs s'avère aussi être une protéine RhoGAP. De plus, nous avons aussi trouvé que DLC1 était un partenaire d'interaction de RasGAP et que cette interaction s'effectuait via l'acide aminé tryptophane 317 de RasGAP. qui s'avère être le premier acide aminé du peptide TAT-RasGAP317.326. Nous avons ensuite évalué le rôle joué par certains fragments de RasGAP dans le processus de métastatisation. Dans ce contexte, des cellules de cancer du sein qui sur-expriment un fragment de RasGAP contenant la séquence TAT-RasGAP317.326 ont vu leur potentiel métastatique diminuer drastiquerment. Malheureusement, aucun effet anti-métastatique n'a été obtenu après injection de TAT-RasGAP317.326 dans les souris. Cependant, nous avons réalisé rétrospectivement que TAT-RasGAP317.326 n'était pas correctement délivré à la tumeur primaire, ce qui nous empêche de tirer des conclusions sur le rôle anti-métastatique de ce peptide. La suite de cette étude visant à mieux comprendre comment TAT-RasGAP317.326 agit, a mené à la découverte que les dix acides aminés de TAT-RasGAP317.326 pouvaient être réduits à trois acides aminés, TAT-RasGAP317.329, tout en gardant l'effet sensibilisateur à la chimiothérapie. En visant à élucider le mode d'interaction entre RasGAP et DLC1, nous avons découvert qu'un acide aminé nécessaire à l'activité GAP de DLC1 était requis pour lier RasGAP, ce qui laisse présager que TAT-RasGAp317.32c, module i'activité GAP de DLC1. Des travaux supplémentaires doivent encore être effectués pour complètement élucider les mécanismes d'action de TAT-RasGAP317.326 et afin de pouvoir l'utiliser comme un outil pour combattre le cancer sur deux fronts, en améliorant les chimiothérapies et en inhibant la formation de métastases.

Critical thoughts on computing atom condensed Fukui functions

Different procedures to obtain atom condensed Fukui functions are described. It is shown how the resulting values may differ depending on the exact approach to atom condensed Fukui functions. The condensed Fukui function can be computed using either the fragment of molecular response approach or the response of molecular fragment approach. The two approaches are nonequivalent; only the latter approach corresponds in general with a population difference expression. The Mulliken approach does not depend on the approach taken but has some computational drawbacks. The different resulting expressions are tested for a wide set of molecules. In practice one must make seemingly arbitrary choices about how to compute condensed Fukui functions, which suggests questioning the role of these indicators in conceptual density-functional theory

A quantum molecular similarity analysis of changes in molecular electron density caused by basis set flotation and electric field application

Quantum molecular similarity (QMS) techniques are used to assess the response of the electron density of various small molecules to application of a static, uniform electric field. Likewise, QMS is used to analyze the changes in electron density generated by the process of floating a basis set. The results obtained show an interrelation between the floating process, the optimum geometry, and the presence of an external field. Cases involving the Le Chatelier principle are discussed, and an insight on the changes of bond critical point properties, self-similarity values and density differences is performed

A comparative analysis by means of quantum molecular similarity measures of density distributions derived from conventional ab initio and density functional methods

A procedure based on quantum molecular similarity measures (QMSM) has been used to compare electron densities obtained from conventional ab initio and density functional methodologies at their respective optimized geometries. This method has been applied to a series of small molecules which have experimentally known properties and molecular bonds of diverse degrees of ionicity and covalency. Results show that in most cases the electron densities obtained from density functional methodologies are of a similar quality than post-Hartree-Fock generalized densities. For molecules where Hartree-Fock methodology yields erroneous results, the density functional methodology is shown to yield usually more accurate densities than those provided by the second order Møller-Plesset perturbation theory

Electrical transport quantum effects in the In0.53Ga0.47As/In0.52Al0.48As heterostructure on silicon

Electrical transport in a modulation doped heterostructure of In0.53Ga0.47As/In0.52Al0.48As grown on Si by molecular beam epitaxy has been measured. Quantum Hall effect and Subnikov¿De Haas oscillations were observed indicating the two¿dimensional character of electron transport. A mobility of 20¿000 cm2/V¿s was measured at 6 K for an electron sheet concentration of 1.7×1012 cm¿2. Transmission electron microscopy observations indicated a significant surface roughness and high defect density of the InGaAs/InAlAs layers to be present due to the growth on silicon. In addition, fine¿scale composition modulation present in the In0.53Ga0.47As/In0.52Al0.48As may further limit transport properties.

Exchange-correlation effects on quantum wires with spin-orbit interactions under the influence of in-plane magnetic fields.

Within the noncollinear local spin-density approximation, we have studied the ground state structure of a parabolically confined quantum wire submitted to an in-plane magnetic field, including both Rashba and Dresselhaus spin-orbit interactions. We have explored a wide range of linear electronic densities in the weak (strong) coupling regimes that appear when the ratio of spin-orbit to confining energy is small (large). These results are used to obtain the conductance of the wire. In the strong coupling limit, the interplay between the applied magnetic field¿irrespective of the in-plane direction, the exchange-correlation energy, and the spin-orbit energy-produces anomalous plateaus in the conductance vs linear density plots that are otherwise absent, or washes out plateaus that appear when the exchange-correlation energy is not taken into account.

Quantum dynamics of crystals of molecular nanomagnets inside a resonant cavity

It is found that crystals of molecular nanomagnets exhibit enhanced magnetic relaxation when placed inside a resonant cavity. A strong dependence of the magnetization curve on the geometry of the cavity has been observed, providing indirect evidence of the coherent microwave radiation by the crystals. A similar dependence has been found for a crystal placed between the Fabry-Perot superconducting mirrors.

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.

On the effect of molecular structure and composition on the photofragmentation of biomolecules

The research on the interaction between radiation and biomolecules pro-vides valuable information for both radiobiology and molecular physics. While radiobiology is interested in the damage inflicted on the molecule upon irradiation, molecular physics exploits these studies to obtain infor-mation about the physical properties of the molecule and the quantum me-chanical processes involved in the interaction. This thesis work investigated how a small change in the structure or composition of a biomolecule changes the response of the molecule to ioniz-ing radiation. Altogether eight different biomolecules were studied: nucleo-sides uridine, 5-methyluridine and thymidine; amino acids alanine, cysteine and serine; and halogenated acetic acids chloro- and bromoacetic acids. The effect of ionizing radiation on these molecules was studied on molecular level, investigating the samples in gas phase. Synchrotron radiation of VUV or soft x-ray range was used to ionize sample molecules, and the subsequent fragmentation processes were investigated with ion mass spectroscopy and ion-ion-electron coincidence spectroscopy. The comparison between the three nucleosides revealed that adding or removing a single functional group can affect not only the bonds from which the molecule ruptures upon ionization but also the charge localiza-tion in the formed fragments. Studies on amino acids and halogenated acetic acids indicated that one simple substitution in the molecule can dramatical-ly change the extent of fragmentation. This thesis work also demonstrates that in order to steer the radiation-induced fragmentation of the molecules, it is not always necessary to alter the amount of energy deposited on the molecules but selecting a suitable substitution may suffice.