DFM/DFMA(A) – analysis and aspects of applying systematic engineering for a microwave testfixture design

In this paper, manufacturability analysis and collection of design aspects is made for a microwave test-fixture. Aspects of applying systematic design for a microwave test-fixture design and manufacturing are also analysed. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) – aspects of the component. The aspects of easy manufacturing for machining the microwave test-fixture are collected. Material selection is discussed and manufacturing stages of prototype manufacturing are presented.

The Pursuit of Efficient Copyright Licensing : How Some Rights Reserved Attempts to Solve the Problems of All Rights Reserved

This dissertation analyses the growing pool of copyrighted works, which are offered to the public using Creative Commons licensing. The study consist of analysis of the novel licensing system, the licensors, and the changes of the "all rights reserved" —paradigm of copyright law. Copyright law reserves all rights to the creator until seventy years have passed since her demise. Many claim that this endangers communal interests. Quite often the creators are willing to release some rights. This, however, is very difficult to do and needs help of specialized lawyers. The study finds that the innovative Creative Commons licensing scheme is well suited for low value - high volume licensing. It helps to reduce transaction costs on several le¬vels. However, CC licensing is not a "silver bullet". Privacy, moral rights, the problems of license interpretation and license compatibility with other open licenses and collecting societies remain unsolved. The study consists of seven chapters. The first chapter introduces the research topic and research questions. The second and third chapters inspect the Creative Commons licensing scheme's technical, economic and legal aspects. The fourth and fifth chapters examine the incentives of the licensors who use open licenses and describe certain open business models. The sixth chapter studies the role of collecting societies and whether two institutions, Creative Commons and collecting societies can coexist. The final chapter summarizes the findings. The dissertation contributes to the existing literature in several ways. There is a wide range of prior research on open source licensing. However, there is an urgent need for an extensive study of the Creative Commons licensing and its actual and potential impact on the creative ecosystem.

Process intensification: From optimised flow patterns to microprocess technology

This thesis is focused on process intensification. Several significant problems and applications of this theme are covered. Process intensification is nowadays one of the most popular trends in chemical engineering and attempts have been made to develop a general, systematic methodology for intensification. This seems, however, to be very difficult, because intensified processes are often based on creativity and novel ideas. Monolith reactors and microreactors are successful examples of process intensification. They are usually multichannel devices in which a proper feed technique is important for creating even fluid distribution into the channels. Two different feed techniques were tested for monoliths. In the first technique a shower method was implemented by means of perforated plates. The second technique was a dispersion method using static mixers. Both techniques offered stable operation and uniform fluid distribution. The dispersion method enabled a wider operational range in terms of liquid superficial velocity. Using dispersion method, a volumetric gas-liquid mass transfer coefficient of 2 s-1 was reached. Flow patterns play a significant role in terms of the mixing performance of micromixers. Although the geometry of a T-mixer is simple, channel configurations and dimensions had a clear effect on mixing efficiency. The flow in the microchannel was laminar, but the formation of vortices promoted mixing in micro T-mixers. The generation of vortices was dependent on the channel dimensions, configurations and flow rate. Microreactors offer a high ratio of surface area to volume. Surface forces and interactions between fluids and surfaces are, therefore, often dominant factors. In certain cases, the interactions can be effectively utilised. Different wetting properties of solid materials (PTFE and stainless steel) were applied in the separation of immiscible liquid phases. A micro-scale plate coalescer with hydrophilic and hydrophobic surfaces was used for the continuous separation of organic and aqueous phases. Complete phase separation occurred in less than 20 seconds, whereas the separation time by settling exceeded 30 min. Fluid flows can be also intensified in suitable conditions. By adding certain additives into turbulent fluid flow, it was possible to reduce friction (drag) by 40 %. Drag reduction decreases frictional pressure drop in pipelines which leads to remarkable energy savings and decreases the size or number of pumping facilities required, e.g., in oil transport pipes. Process intensification enables operation often under more optimal conditions. The consequent cost savings from reduced use of raw materials and reduced waste lead to greater economic benefits in processing.

Older consumers adopting information and communication technology: Evaluating opportunities for health care applications

The purpose of this dissertation is to analyse older consumers' adoption of information and communication technology innovations, assess the effect of aging related characteristic, and evaluate older consumers' willingness to apply these technologies in health care services. This topic is considered important, because the population in Finland (as in other welfare states) is aging and thus offers a possibility for marketers, but on the other hand threatens society with increasing costs for healthcare. Innovation adoption has been under research from several aspects in both organizational and consumer research. In the consumer behaviour, several theories have been developed to predict consumer responses to innovation. The present dissertation carefully reviews previous research and takes a closer look at the theory of planned behaviour, technology acceptance model and diffusion of innovations perspective. It is here suggested that there is a possibility that these theories can be combined and complemented to predict the adoption of ICT innovations among aging consumers, taking the aging related personal characteristics into account. In fact, there are very few studies that have concentrated on aging consumers in the innovation research, and thus there was a clear indent for the present research. ICT in the health care context has been studied mainly from the organizational point of view. If the technology is thus applied for the communication between the individual end-user and service provider, the end-user cannot be shrugged off. The present dissertation uses empirical evidence from a survey targeted to 55-79 year old people from one city in Southern-Carelia. The empirical analysis of the research model was mainly based on structural equation modelling that has been found very useful on estimating causal relationships. The tested models were targeted to predict the adoption stage of personal computers and mobile phones, and the adoption intention of future health services that apply these devices for communication. The present dissertation succeeded in modelling the adoption behaviour of mobile phones and PCs as well as adoption intentions of future services. Perceived health status and three components behind it (depression, functional ability, and cognitive ability) were found to influence perception of technology anxiety. Better health leads to less anxiety. The effect of age was assessed as a control variable, in order to evaluate its effect compared to health characteristics. Age influenced technology perceptions, but to lesser extent compared to health. The analyses suggest that the major determinant for current technology adoption is perceived behavioural control, and additionally technology anxiety that indirectly inhibit adoption through perceived control. When focusing on future service intentions, the key issue is perceived usefulness that needs to be highlighted when new services are launched. Besides usefulness, the perception of online service reliability is important and affects the intentions indirectly. To conclude older consumers' adoption behaviour is influenced by health status and age, but also by the perceptions of anxiety and behavioural control. On the other hand, launching new types of health services for aging consumers is possible after the service is perceived reliable and useful.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Managing the Front End of Innovation in a Networked Company Environment - Combining Strategy, Processes and Systems of Innovation

The objective of the thesis is to enhance the understanding about the management of the front end phases of the innovation process in a networked environment. The thesis approaches the front end of innovation from three perspectives, including the strategy, processes and systems of innovation. The purpose of the use of different perspectives in the thesis is that of providing an extensive systemic view of the front end, and uncovering the complex nature of innovation management. The context of the research is the networked operating environment of firms. The unit of analysis is the firm itself or its innovation processes, which means that this research approaches the innovation networks from the point of view of a firm. The strategy perspective of the thesis emphasises the importance of purposeful innovation management, the innovation strategy of firms. The role of innovation processes is critical in carrying out innovation strategies in practice, supporting the development of organizational routines for innovation, and driving the strategic renewal of companies. The primary focus of the thesis from systems perspective is on idea management systems, which are defined as a part of innovation management systems, and defined for this thesis as any working combination of methodology and tools (manual or IT-supported) that enhance the management of innovations within their early phases. The main contribution of the thesis are the managerial frameworks developed for managing the front end of innovation, which purposefully “wire” the front end of innovation into the strategy and business processes of a firm. The thesis contributes to modern innovation management by connecting the internal and external collaboration networks as foundational elements for successful management of the early phases of innovation processes in a dynamic environment. The innovation capability of a firm is largely defined by its ability to rely on and make use of internal and external collaboration already during the front end activities, which by definition include opportunity identification and analysis, idea generation, profileration and selection, and concept definition. More specifically, coordination of the interfaces between these activities, and between the internal and external innovation environments of a firm is emphasised. The role of information systems, in particular idea management systems, is to support and delineate the innovation-oriented behaviour and interaction of individuals and organizations during front end activities. The findings and frameworks developed in the thesis can be used by companies for purposeful promotion of their front end processes. The thesis provides a systemic strategy framework for managing the front end of innovation – not as a separate process, but as an elemental bundle ofactivities that is closely linked to the overall innovation process and strategy of a firm in a distributed environment. The theoretical contribution of the thesis relies on the advancement of the open innovation paradigm in the strategic context of a firm within its internal and external innovation environments. This thesis applies the constructive research approach and case study methodology to provide theoretically significant results, which are also practically beneficial.

Reconstruction and analysis of surface variation using photometric stereo

In many industrial applications, accurate and fast surface reconstruction is essential for quality control. Variation in surface finishing parameters, such as surface roughness, can reflect defects in a manufacturing process, non-optimal product operational efficiency, and reduced life expectancy of the product. This thesis considers reconstruction and analysis of high-frequency variation, that is roughness, on planar surfaces. Standard roughness measures in industry are calculated from surface topography. A fast and non-contact method to obtain surface topography is to apply photometric stereo in the estimation of surface gradients and to reconstruct the surface by integrating the gradient fields. Alternatively, visual methods, such as statistical measures, fractal dimension and distance transforms, can be used to characterize surface roughness directly from gray-scale images. In this thesis, the accuracy of distance transforms, statistical measures, and fractal dimension are evaluated in the estimation of surface roughness from gray-scale images and topographies. The results are contrasted to standard industry roughness measures. In distance transforms, the key idea is that distance values calculated along a highly varying surface are greater than distances calculated along a smoother surface. Statistical measures and fractal dimension are common surface roughness measures. In the experiments, skewness and variance of brightness distribution, fractal dimension, and distance transforms exhibited strong linear correlations to standard industry roughness measures. One of the key strengths of photometric stereo method is the acquisition of higher frequency variation of surfaces. In this thesis, the reconstruction of planar high-frequency varying surfaces is studied in the presence of imaging noise and blur. Two Wiener filterbased methods are proposed of which one is optimal in the sense of surface power spectral density given the spectral properties of the imaging noise and blur. Experiments show that the proposed methods preserve the inherent high-frequency variation in the reconstructed surfaces, whereas traditional reconstruction methods typically handle incorrect measurements by smoothing, which dampens the high-frequency variation.

CFD simulation of complex phenomena containing suspensions and flow throughporous media

There is an increasing reliance on computers to solve complex engineering problems. This is because computers, in addition to supporting the development and implementation of adequate and clear models, can especially minimize the financial support required. The ability of computers to perform complex calculations at high speed has enabled the creation of highly complex systems to model real-world phenomena. The complexity of the fluid dynamics problem makes it difficult or impossible to solve equations of an object in a flow exactly. Approximate solutions can be obtained by construction and measurement of prototypes placed in a flow, or by use of a numerical simulation. Since usage of prototypes can be prohibitively time-consuming and expensive, many have turned to simulations to provide insight during the engineering process. In this case the simulation setup and parameters can be altered much more easily than one could with a real-world experiment. The objective of this research work is to develop numerical models for different suspensions (fiber suspensions, blood flow through microvessels and branching geometries, and magnetic fluids), and also fluid flow through porous media. The models will have merit as a scientific tool and will also have practical application in industries. Most of the numerical simulations were done by the commercial software, Fluent, and user defined functions were added to apply a multiscale method and magnetic field. The results from simulation of fiber suspension can elucidate the physics behind the break up of a fiber floc, opening the possibility for developing a meaningful numerical model of the fiber flow. The simulation of blood movement from an arteriole through a venule via a capillary showed that the model based on VOF can successfully predict the deformation and flow of RBCs in an arteriole. Furthermore, the result corresponds to the experimental observation illustrates that the RBC is deformed during the movement. The concluding remarks presented, provide a correct methodology and a mathematical and numerical framework for the simulation of blood flows in branching. Analysis of ferrofluids simulations indicate that the magnetic Soret effect can be even higher than the conventional one and its strength depends on the strength of magnetic field, confirmed experimentally by Völker and Odenbach. It was also shown that when a magnetic field is perpendicular to the temperature gradient, there will be additional increase in the heat transfer compared to the cases where the magnetic field is parallel to the temperature gradient. In addition, the statistical evaluation (Taguchi technique) on magnetic fluids showed that the temperature and initial concentration of the magnetic phase exert the maximum and minimum contribution to the thermodiffusion, respectively. In the simulation of flow through porous media, dimensionless pressure drop was studied at different Reynolds numbers, based on pore permeability and interstitial fluid velocity. The obtained results agreed well with the correlation of Macdonald et al. (1979) for the range of actual flow Reynolds studied. Furthermore, calculated results for the dispersion coefficients in the cylinder geometry were found to be in agreement with those of Seymour and Callaghan.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Improving the effectiveness of supply chain development work – an expert role perspective

This study focuses to the intersection of three sets of activities in a company: expert work, development work and supply chain management, SCM. Experts and expert work represent a set of individuals whose efficiency and impact this study is intended to improve, while development work defines the set of organizational activities to focus on. SCM as an expertise area acts as the platform on which this study is built. The study has two aims. Firstly, it aims to derive a model helping an SCM expert to increase the effectiveness of expert work in development tasks by understanding the encountered organizational situations and processes better, reflecting his/her past and future actions to organizational processes and selecting and adjusting the processes and contents of his/her work accordingly. Secondly, it aims to develop applicable approaches and methods to understand, evaluate and manage the organizational processes and situations in development work. The integrative model on approaches and methods to improve the effectiveness of development processes is split to two aggregate dimensions: technical performance of the developed solution and consumption of resources of the development process. Six potential approaches and methods aiming at helping in the management of organizational dimensions are presented in enclosed publications. The approaches focus on three subtasks of development work: decision making, implementation and change, and knowledge accumulation. The approaches and methods have been tested in case studies representing typical development processes in the area of supply chain management. As a result, four suggestions are presented. Firstly, SCM experts are advised to consider the SCM development work to be consisting of development processes. Secondly, inside these processes they should identify and evaluate the risk of difficult decision-making related to organizational factors. Thirdly, they are prompted for an active role in implementation and change, supporting the implementation through whole process. Finally, the development should be seen in a holistic view, taking into account the stage of knowledge and organizational issues related to it, and adopt a knowledge development strategy.

Making Sense of Women Managers’ Identities through the Constructions of Managerial Career and Gender

This doctoral thesis is about gendered managerial identity construction of women managers. Finnish women managers have been researched from the viewpoints of equality and discrimination issues, careers, and women’s overall positions in work life. However, managerial identity has remained as an unexplored territory. The phenomenon is approached discourse analytically; an interview material that is gathered from 13 women managers in the South-Karelian region is in focus. By studying discourses it is possible to open up understandings how meanings are given to experiences. Women managers’ identity construction is examined from the perspectives of managerial career, managerial practices, and gender. Gender is a meta-concept in this research, as it so profoundly affects our sense of being and acting, although the meaning of it often remains undervalued, invisible, or even denied. This research shows that gender becomes highly visible in managerial contexts, when it is used for some specific purpose, that is, treated as a strategy. By studying women managers it is possible to demystify often so abstract managerial ideals, and open up their taken-for-granted masculine subtexts. It is argued that from the point of view of conducting managerial work, the meaning of self-knowledge appears as critical.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Creating Global Competitive Advantage by Global Product Technology Transfers

Globalization is the trend which is realized in all areas in today’s business world. Pressure for cost reduction, changes in market situation and available scale economies have changed business environment more global than ever. To respond to new situation, companies are establishing global strategies. In this thesis, available global competitive advantages in electrical machine industry are studied in context of gaining them by global technology transfers. In theory part, establishing global strategy and competitive advantage is considered with connection to global sourcing and supply chain management. Additionally, market development in 21st century and its impact on global strategies is studied. In practice, global manufacturing is enabled by technology transfer projects. Smooth and fast project implementation enables faster and more flexible production ramp up. By starting the production available competitive advantages can be realized. In this thesis the present situation of technology transfer projects and the risks and advantages related to global manufacturing are analyzed. The analysis of implemented technology transfer projects indicates that project implementation is in good level. For further development of project execution 10 minor suggestions could be presented with two major ones: higher level standardization and development of product information model to support better global manufacturing.

Fuzzy subgroups, algebraic and topological points of view and complex analysis

Fuzzy subsets and fuzzy subgroups are basic concepts in fuzzy mathematics. We shall concentrate on fuzzy subgroups dealing with some of their algebraic, topological and complex analytical properties. Explorations are theoretical belonging to pure mathematics. One of our ideas is to show how widely fuzzy subgroups can be used in mathematics, which brings out the wealth of this concept. In complex analysis we focus on Möbius transformations, combining them with fuzzy subgroups in the algebraic and topological sense. We also survey MV spaces with or without a link to fuzzy subgroups. Spectral space is known in MV algebra. We are interested in its topological properties in MV-semilinear space. Later on, we shall study MV algebras in connection with Riemann surfaces. In fact, the Riemann surface as a concept belongs to complex analysis. On the other hand, Möbius transformations form a part of the theory of Riemann surfaces. In general, this work gives a good understanding how it is possible to fit together different fields of mathematics.

Assessment of facilitators' design thinking

Meeting design is one of the most critical prerequisites of the success of facilitated meetings but how to achieve the success is not yet fully understood. This study presents a descriptive model of the design of technology supported meetings based on literature findings about the key factors contributing to the success of collaborative meetings, and linking these factors to the meeting design steps by exploring how facilitators consider the factors in practice in their design process. The empirical part includes a multiple-case study conducted among 12 facilitators. The case concentrates on the GSS laboratory at LUT, which has been working on facilitation and GSS for the last fifteen years. The study also includes ‘control’ cases from two comparable institutions. The results of this study highlight both the variances and commonalities among facilitators in how they design collaboration processes. The design thinking of facilitators of all levels of experience is found to be largely consistent wherefore the key design factors as well as their role across the design process can be outlined. Session goals, group composition, supporting technology, motivational aspects, physical constraints, and correct design practices were found to outline the key factors in design thinking. These factors are further categorized into three factor types of controllable, constraining, and guiding design factors, because the study findings indicate the factor type to have an effect on the factor’s importance in design. Furthermore, the order of considering these factors in the design process is outlined.