New genera of philopotine spider flies (Diptera, Acroceridae) with a key to living and fossil genera

In this paper we describe two new genera of philopotine Acroceridae: Schlingeriella irwini gen. et sp. n. (New Caledonia) and Quasi fisheri gen. et sp. n. (Mexico). The Baltic amber species Eulonchiella eocenica Meunier, 1912 is rediagnosed and a neotype designated based on a newly discovered specimen. We also provide a dichotomous key to the world genera of Philopotinae, both living and fossil.

Occurrence and characterization of injuries caused by Mycotretus apicalis Lacordaire, 1842 (Coleoptera: Erotylidae) on cultivation of Pleurotus sajor-caju

When carrying out experiments on the production of the edible mushroom Pleurotus sajor-caju in the Laboratory of Edible Mushrooms, Universidade Federal de Lavras, Lavras, Brazil, in the second half of 2007, the presence of beetles later identified as belonging to the species Mycotretus apicalis was verified. This is the first recorded instance of this insect in cultures of P. sajor-caju in Brazil. The larvae and adults of this insect feed on the fruiting bodies of commercial harvests, resulting in reduction in mushroom quality. To provide evaluation of the injuries caused by these insects, substrates colonized by P. sajor-caju were infested with 4, 8, 16, 32 and 64 insects per block of substrate being the qualitative and quantitative losses then noted. Despite the lack of an observed decrease in biological efficiency, the injuries caused by these insects affected the commercial quality of the mushrooms, which may result in economic losses. The results showed that infestations of 32 insects per 0.8 kg of substrate led to a depreciation in the prices of mushrooms meant to be sold.

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) with a broad range of 3HV content at high yields by Burkholderia sacchari IPT 189

The biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from sucrose and propionic acid by Burkholderia sacchari IPT 189 was studied using a two-stage bioreactor process. In the first stage, this bacterium was cultivated in a balanced culture medium until sucrose exhaustion. In the second stage, a solution containing sucrose and propionic acid as carbon source was fed to the bioreactor at various sucrose/propionic acid (s/p) ratios at a constant specific flow rate. Copolymers with 3HV content ranging from 40 down to 6.5 (mol%) were obtained with 3HV yield from propionic acid (Y-3HV/prop) increasing from 1.10 to 1.34 g g(-1). Copolymer productivity of 1 g l(-1) h(-1) was obtained with polymer biomass content rising up to 60% by increasing a specific flow rate at a constant s/p ratio. Increasing values of 3HV content were obtained by varying the s/p ratios. A simulation of production costs considering Y-3HV/prop obtained in the present work indicated that a reduction of up to 73% can be reached, approximating US$ 1.00 per kg which is closer to the value to produce P3HB from sucrose (US$ 0.75 per kg).

Screening of bacteria to produce polyhydroxyalkanoates from xylose

Although xylose is a major constituent of lignocellulosic feedstock and the second most abundant sugar in nature, only 22% of 3,152 screened bacterial isolates showed significant growth in xylose in 24 h. Of those 684, only 24% accumulated polyhydroxyalkanoates after 72 h. A mangrove isolate, identified as Bacillus sp. MA3.3, yielded the best results in literature thus far for Gram-positive strains in experiments with glucose and xylose as the sole carbon source. When glucose or xylose were supplied, poly-3-hydroxybutyrate (PHB) contents of cell dry weight were, respectively, 62 and 64%, PHB yield 0.25 and 0.24 g g(-1) and PHB productivity (P(PHB)) 0.10 and 0.06 g l(-1) h(-1). This 40% P(PHB) difference may be related to the theoretical ATP production per 3-hydroxybutyrate (3HB) monomer calculated as 3 mol mol(-1) for xylose, less than half of the ATP/3HB produced from glucose (7 mol mol(-1)). In PHB production using sugar mixtures, all parameters were strongly reduced due to carbon catabolite repression. PHB production using Gram-positive strains is particularly interesting for medical applications because these bacteria do not produce lipopolysaccharide endotoxins which can induce immunogenic reactions. Moreover, the combination of inexpensive substrates and products of more value may lead to the economical sustainability of industrial PHB production.

Statistical treatment of misalignments in particle accelerators

To know how much misalignment is tolerable for a particle accelerator is an important input for the design of these machines. In particle accelerators the beam must be guided and focused using bending magnets and magnetic lenses, respectively. The alignment of the lenses along a transport line aims to ensure that the beam passes through their optical axes and represents a critical point in the assembly of the machine. There are more and more accelerators in the world, many of which are very small machines. Because the existing literature and programs are mostly targeted for large machines. in this work we describe a method suitable for small machines. This method consists in determining statistically the alignment tolerance in a set of lenses. Differently from the methods used in standard simulation codes for particle accelerators, the statistical method we propose makes it possible to evaluate particle losses as a function of the alignment accuracy of the optical elements in a transport line. Results for 100 key electrons, on the 3.5-m long conforming beam stage of the IFUSP Microtron are presented as an example of use. (C) 2010 Elsevier B.V. All rights reserved.

Border trees of complex networks

The comprehensive characterization of the structure of complex networks is essential to understand the dynamical processes which guide their evolution. The discovery of the scale-free distribution and the small-world properties of real networks were fundamental to stimulate more realistic models and to understand important dynamical processes related to network growth. However, the properties of the network borders (nodes with degree equal to 1), one of its most fragile parts, remained little investigated and understood. The border nodes may be involved in the evolution of structures such as geographical networks. Here we analyze the border trees of complex networks, which are defined as the subgraphs without cycles connected to the remainder of the network (containing cycles) and terminating into border nodes. In addition to describing an algorithm for identification of such tree subgraphs, we also consider how their topological properties can be quantified in terms of their depth and number of leaves. We investigate the properties of border trees for several theoretical models as well as real-world networks. Among the obtained results, we found that more than half of the nodes of some real-world networks belong to the border trees. A power-law with cut-off was observed for the distribution of the depth and number of leaves of the border trees. An analysis of the local role of the nodes in the border trees was also performed.

Acupuncture with manual and electrical stimulation for labour pain : a longitudinal randomised controlled trial

Background: Acupuncture is commonly used to reduce pain during labour despite contradictory results. The aim of this study is to evaluate the effectiveness of acupuncture with manual stimulation and acupuncture with combined manual and electrical stimulation (electro-acupuncture) compared with standard care in reducing labour pain. Our hypothesis was that both acupuncture stimulation techniques were more effective than standard care, and that electro-acupuncture was most effective.  Methods: A longitudinal randomised controlled trial. The recruitment of participants took place at the admission to the labour ward between November 2008 and October 2011 at two Swedish hospitals. 303 nulliparous women with normal pregnancies were randomised to: 40 minutes of manual acupuncture (MA), electro-acupuncture (EA), or standard care without acupuncture (SC). Primary outcome: labour pain, assessed by Visual Analogue Scale (VAS). Secondary outcomes: relaxation, use of obstetric pain relief during labour and post-partum assessments of labour pain. The sample size calculation was based on the primary outcome and a difference of 15 mm on VAS was regarded as clinically relevant, this gave 101 in each group, including a total of 303 women.  Results: Mean estimated pain scores on VAS (SC: 69.0, MA: 66.4 and EA: 68.5), adjusted for: treatment, age, education, and time from baseline, with no interactions did not differ between the groups (SC vs MA: mean difference 2.6, 95% confidence interval [CI] -1.7-6.9 and SC vs EA: mean difference 0.6 [95% CI] -3.6-4.8). Fewer number of women in the EA group used epidural analgesia (46%) than women in the MA group (61%) and SC group (70%) (EA vs SC: odds ratio [OR] 0.35; [95% CI] 0.19-0.67).  Conclusions: Acupuncture does not reduce women's experience of labour pain, neither with manual stimulation nor with combined manual and electrical stimulation. However, fewer women in the EA group used epidural analgesia thus indicating that the effect of acupuncture with electrical stimulation may be underestimated. These findings were obtained in a context with free access to other forms of pain relief.

Acupuncture for labour pain

Background: Acupuncture involves puncturing the skin with thin sterile needles at defined acupuncture points. Previous studies are inconclusive regarding the effect of acupuncture on labour pain, but some studies have found a reduction in the use of pharmacological pain relief when acupuncture is administered. The appropriate dose of acupuncture treatment required to elicit a potential effect on labour pain has not been fully explored. The dose is determined by many different factors, including the number of needles used and the intensity of the stimulation. In Sweden, manual stimulation of the needles is common practice when acupuncture is used for labour pain, but electrical stimulation of the needles, which gives a higher dose, could possibly be more effective. The overall aim of this thesis was to evaluate the effectiveness of acupuncture with manual stimulation (MA) of the needles as well as acupuncture with a combination of manual and electrical stimulation (EA) in reducing labour pain, compared with standard care without any form of acupuncture (SC). Methods: The study was designed as a three-armed randomised controlled trial in which 303 nulliparous women with normal pregnancies were randomised to MA, EA, or SC. The primary outcome was labour pain, assessed using the Visual Analogue Scale (VAS). Secondary outcomes were relaxation during labour, use of obstetric pain relief, and associations between maternal characteristics and labour pain and use of epidural analgesia respectively. Also, labour and infant outcomes, recollection of labour pain, and maternal experiences, such as birth experience and experience of the midwife, were investigated two months after the birth. The sample size calculation was based on the potential to discover a difference of 15 mm on the VAS. Data were collected during labour before the interventions, the day after birth, and two months later. Besides using the VAS, information was collected by means of study specific protocol, questionnaires and medical records. Results: The mean VAS scores were 66.4 in the MA group, 68.5 in the EA group, and 69.0 in the SC group (mean differences: MA vs. SC 2.6 95% CI -1.7 to 6.9, and EA vs. SC 0.6 95% CI -3.6 to 4.8). Other methods of pain relief were used less frequently in the EA group, including epidural analgesia, MA 61.4%, EA 46%, and SC 69.9%. (EA vs. SC OR 0.4 95% CI 0.2 to 0.7). No statistically significant differences were found in the recollection of labour pain between the three groups two months after birth (mean VAS score: MA 69.3, EA 68.7 and SC 70.1). A few maternal characteristics were associated with labour pain (age, dysmenorrhea, and cervix dilatation), but none of the investigated characteristics predicted the outcome of the acupuncture treatment in MA or EA. Women in the EA group experienced acupuncture as being effective for labour pain to a higher extent than women who received MA, MA 44.4%, EA 67.1% (EA vs. MA OR 2.4 95% CI 1.2 to 4.8). Women in the EA group also spent less time in labour (mean 500 min) than those who received MA (mean 619 min) and SC (mean 615 min) (EA vs. MA HR 1.4 95% CI 1.0 to1.9, EA vs. SC HR 1.4, 95% CI 1.1 to 2.0), and had less blood loss than women receiving SC, (EA vs. SC OR 0.1 95% CI 0.3 to 0.7). The women’s assessment of the midwife as being supportive during labour (MA 77.2%, EA 83.5%, SC 80%), overall satisfaction with midwife care (MA 100%, EA 97.5%, SC 98.7%), and having an overall positive childbirth experience (MA 64.6%, EA 61.0%, SC 54.3%) did not differ statistically. No serious side effects of the acupuncture treatment were reported. Conclusion: Acupuncture, regardless of type of stimulation, did not differ from standard care without acupuncture in terms of reducing women’s experience of pain during labour, or their memory of pain and childbirth overall two months after the birth. However, other forms of obstetric pain relief were less frequent in women receiving a combination of manual and electrical stimulation, suggesting that this method could facilitate coping with labour pain.

Rapid prototyping of ubiquitous computing environments

Ubiquitous computing raises new usability challenges that cut across design and development. We are particularly interested in environments enhanced with sensors, public displays and personal devices. How can prototypes be used to explore the users' mobility and interaction, both explicitly and implicitly, to access services within these environments? Because of the potential cost of development and design failure, these systems must be explored using early assessment techniques and versions of the systems that could disrupt if deployed in the target environment. These techniques are required to evaluate alternative solutions before making the decision to deploy the system on location. This is crucial for a successful development, that anticipates potential user problems, and reduces the cost of redesign. This thesis reports on the development of a framework for the rapid prototyping and analysis of ubiquitous computing environments that facilitates the evaluation of design alternatives. It describes APEX, a framework that brings together an existing 3D Application Server with a modelling tool. APEX-based prototypes enable users to navigate a virtual world simulation of the envisaged ubiquitous environment. By this means users can experience many of the features of the proposed design. Prototypes and their simulations are generated in the framework to help the developer understand how the user might experience the system. These are supported through three different layers: a simulation layer (using a 3D Application Server); a modelling layer (using a modelling tool) and a physical layer (using external devices and real users). APEX allows the developer to move between these layers to evaluate different features. It supports exploration of user experience through observation of how users might behave with the system as well as enabling exhaustive analysis based on models. The models support checking of properties based on patterns. These patterns are based on ones that have been used successfully in interactive system analysis in other contexts. They help the analyst to generate and verify relevant properties. Where these properties fail then scenarios suggested by the failure provide an important aid to redesign.

Reaction of Bipolaris euphorbiae to environmental factors and its tolerance to solar and ultraviolet radiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Production of Agaricus blazei ss. Heinemann (A. brasiliensis) on different casing layers and environments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dose-dependent effect of Resveratrol on bladder cancer cells: Chemoprevention and oxidative stress

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An Anisotropic Model of Damage and Unilateral Effect for Brittle Materials

This work deals with the initial applications and formulation of an aniscitropic plastic-damage constitutive model proposed for non-linear analysis of reinforced concrete structures submitted to a loading with change of the sign. The original constitutive model is based on the fundamental hypothesis of energy equivalence between real and continuous medium following the concepts of the Continuum Damage Mechanics. The concrete is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity (distinct elastic responses whether traction or compression stress states prevail) induced by damage evolution. In order to take into account the bimodularity, two damage tensors governing the rigidity in tension or compression regimes are introduced. Then, some conditions are introduced in the original version of the model in order to simulate the damage unilateral effect. The three-dimensional version of the proposed model is analyzed in order to validate its formulation when compared to micromechanical theory. The one-dimensional version of the model is applied in the analyses of a reinforced concrete beam submitted to a loading with change of the sign. Despite the parametric identification problems, the initial applications show the good performance of the model.