Poverty in the fisheries, inductors, causes and intervention

The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.

Keeping quality of imported dried fish

All imported salted, dried fish samples tested had a salt content below 30% and above 12% and hence met requirements of the proposed standard. Also samples without quality cut tested had a greater salt content than that with quality cut. This indicates that salt contributes to protecting dried fish and hence may be endorsed by sensory evaluation to a certain extent. Samples with quality cut had more moisture than that without quality cut. But all samples with and without quality cut had a moisture content greater than 35% which is the maximum moisture content for such species specified in the standard. Microbiological testing for total counts and Coliform contents too showed that good quality dried fish had counts greater than that specified in the standard. The different species of fish tested had varying lengths of shelf life. But on an average the shelf life of dried fish could be prolonged for about 12 days by re-drying at 45°C for 6 hours, i.e., re-drying at these temperatures without subsequent packing in polythene bags may not be practical for prolonging the storage life of salted/dried fish.

Increase of storage shelf life of locally produced salted/dried fish by redrying and/or packeting

Experiments were undertaken to prolong the storage life of salted/dried fish by re-drying and/or packing. The storage life under normal conditions is 51 days; re-drying the fish at 50°C for 12 hours extends the storage life only by 7 days. However, re-drying and packing gizzard shad (Gonialosa manminna ) in polyethylene maintains the fish in excellent conditions for well over 87 days. The use of air tight bags for storing good quality salted dried fish is recommended.

Durability study of eleven years old cement-bentonite cut-off wall material

Comprehensive understanding of the long-term performance of cement-bentonite slurry trench cut-off walls is essential as these mixes may degrade when exposed to aggressive environments or when subjected to prolonged drying. A series of wetting-drying and immersion experiments was carried out to evaluate the durability characteristics of laboratory mixed samples and block field samples from 40 days to 11 years of age. For the wetting-drying tests, the samples buried in medium graded sand were subjected to periodical flooding and drying cycles. They were then used for permeability testing and unconfined compressive strength (UCS) testing. For the immersion tests, the samples confined in perforated molds were submerged in magnesium sulfate solution for 16 weeks and their microstructures were then analyzed using X-ray diffraction (XRD) technique. This paper identifies the effects of contaminant exposure on durability of cement-bentonite and the effects of aging by comparing 11 years old samples to younger samples. Test results showed that young or previously contaminated cement-bentonite mixes are more susceptible to sulfate attack than old or less contaminated mixes. Copyright ASCE 2008.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Flavour components of some processed. fish and fishery products of Japan

A study was conducted to examine the flavour components of some processed fish and fishery products of Japan by gas chromatography-mass spectrometry (GC-MS). In brief the method was to absorb the headspace volatiles at 70°C into the fused silica fibre of needle of the solid phase micro extraction fibre. The absorbed components were injected to the GC-MS. The components were identified by computer matching with library database as well as by authentic standard components. In general the number of flavour components were higher in the processed fish and fishery products (except frozen prawn) than that of the raw fish and prawn. The concentration (quantity) of the f1avour components in processed fish and fishery products was much higher than that of the raw fish and prawn. Smoked salmon and baked salmon possessed double number of flavour components than that of the raw salmon. Smoking resulted the highest number of flavour components followed by baking (grilling) and canning, surimi products (kamaboko and chikuwa), drying and lastly salting. However, freezing and frozen storage resulted loss of flavour components in prawn.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.

Smoke curing of mussels

Substantial quantities of green mussels are available on the Kerala coast particularly from Calicut to north. But these are not properly exploited at present. Simple and economic methods of processing like drying and smoking can go a long way towards market promotion and better returns to the fishermen. This paper reports the method of preparation of smoked mussels which have a great potential for export as well as local marketing.

Utilization of frog waste

Commercial frog waste samples have been converted into meals by cooking at 0.7 kg/sq. cm for 30 min, draining off the stick water and drying the press cake either in the sun, tunnel dryer under controlled conditions or hot air oven. Yield of the meal varied between 18.6 to 21.5% of the fresh frog waste. Chemical analyses of the meals have shown that the meals prepared from frog waste conform to standards prescribed for fish meal and livestock feed and can therefore be used for supplementation of poultry/animal feed.

Protein concentrate from shark

A simple method of leaching the minced muscle with water repeatedly followed by cooking, pressing, drying the cake and powdering has been described for the preparation of fish protein concentrate (FPC) from shark without the use of solvents. The FPC thus prepared had high protein content and was completely free of urea. It contained all the essential amino acids in a balanced proportion with high lysine content and had a storage life up to 12 months. This product can be used for the fortification of bread, biscuits and chappathis respectively at 10, 5 and 2% levels.

Shark fin rays: technology of extraction

A simple process is described for extraction of rays from shark fins. The process consists in treating the rays with acetic acid to soften the tissue, separation of the rays by hand and drying. White fins yield almost double the quantity of rays compared to black fins.

Canning of smoked sardine

A process for canning smoked oil sardine (Sardinella longiceps) is described. Cold blanching of dressed fish in brine, smoking followed by drying in hot air or cooking in steam to reduce the moisture content to the required level and subsequent canning yields product with good organoleptic properties. Coconut husk is used as source of smoke.

Protein from Jawla prawn (Acetes spp.) and Squilla (Orato squilla nepa)

A simple method of isolation of protein from jawla prawn and squilla, which does not involve any chemical treatment, is reported. The method consists in blending the jawla prawn/squilla with equal quantity of water, removal of chitinous matter, heating the pulp at 112°C for 15-20 minutes and drying the precipitated protein after filtration.

Water soluble nitrogenous component from squilla (Orato squilla nepa)

A water soluble hygroscopic powder has been isolated from squilla in good yield, ranging from 3.5 to 5.0% of the fresh raw material, by a simple direct method. The process consists of homogenising squilla with an equal quantity of water, removal of chitinous matter from the slurry by filtration, heating the filtrate at 0.7 kg/sq.cm steam pressure for 15-20 minutes, removal of the precipitated protein by filtration and concentration and final drying in vacuum of the filtered cooled liquor. The pale brown powder so obtained consists mainly of peptones and proteoses and has been found to be comparable to BDH peptone for growth of bacteria, ability to serve as source for tryptophan for indole production and to provide substrate for the production of hydrogen sulphide. Comparative studies have been made on similar water soluble fractions from two species of prawns, namely, Metapenaeus affinis and Parapenaeopsis stylifera.

Pickled products from green mussel

Methods of preparing different types of delicious ready to serve pickled products from green mussel (Perna viridis) and a comparative study of their storage characteristics are reported. Of the three types of products, namely, dried and pickled, fried and pickled and light smoked and pickled, the last one had the best shelf life. The optimum conditions of drying and smoking for preparing such type of pickles are also reported.