Indicios de antecedencia en la red fluvial del sureste de Galicia

[ES] El presente trabajo ofrece un análisis preliminar de la red fluvial con antecedencia terciaria del sureste gallego. Las observaciones geomorfológicas de campo se centran en la cartografía de terrazas erosivas, canales abandonados, meandros colgados, codos de captura y redes anómalas. Para su interpretación se confrontaron con los thalwegs de los cursos principales y las fracturas alpinas cartografiadas por otros autores. Se propone una cronología para los procesos fluviales identificados; cronología que apunta una antigüedad de la red fluvial mayor a la estimada hasta el momento. De las siete tendencias identificadas, tres presentan una entidad regional (ENE-WSW, NE-SW, N-S), y cuatro local (NW-SE, SW-NE, SE-NW, S-N). Se confirma el carácter principal de la paleorred ENE-WSW (caracterizada por el río Sil) y como hipótesis se propone, para la Sierra de Queixa-San Mamede, el carácter de paleorrelieve positivo de herencia mesozoica. Este relieve habría sufrido varios procesos de levantamiento isostático y también tectónico durante la Orogenia Alpina. Estos levantamientos habrían provocado la superposición de capturas en las estribaciones surorientales de la Sierra de Queixa-San Mamede.

Evolución geomorfológica del Macizo Hespérico peninsular:estudio de un sector comprendido entre las provincias de Lugo y Ourense (Galicia, NW de España)

[EN] This paper deals with the relief generation in Ourense, an interior territory of the Galicia Country, at NW Spain, after the breakdown of Pangea 200 million years ago. The rupture of supercontinent causes the main effects in the outer part of Galicia, the present coast line and the shelf, but also the inner parts of Galicia where the landscape changes dramatically mainly ruled by fluvial incision connected with uprising, (orogenic, epirogenic, or isostatic origin), or even with eustatic oscillations, that shaped the previous old mesozoic landscape. Various things complicate the correct understanding of Galician geomorphology:1) the prevalent hercynian structure, (presumably reactivated during the Alpine Orogeny), causes that the epigenic processes, (fluvial, glaciar, marine and etching), acting on Galicia from Mesozoic to present times, produce end forms identified erroneously at the previous literature as tectonic and not as etch forms profiting from lithological or structural contrasts. 2) the common morphotectonic model accepted by all previous researchers establishes for the whole of Galicia a blocky pattern, (horst and graben like), due to extensional tectonic regime. This model is proved as no longer valid because the Galician tertiary basins, even were described at the past as graben depressions never have this origin. 3) big differences exist between the north and western sides of Galicia that show contrasted tectonic regime: compressional (with forms as the so called raised platforms), at the northern coast border, and extensional (with forms so typical as the Rias), at the western side. The study area is located at the confluence of two tectonic domains where the above mentioned effects are coincidents and specially well showed through different effects: prominent assimetry of fluvial captures (west facing), pronounced river incision and different kinds of tertiary basins: either strike slipe faults (Maceda, Xinzo de Limia, etc), or overslipped by inverse faults, (Quiroga, A Rúa, etc.), or even corresponding with depressions never, (or anywise passively), affected by tectonic movements, (Monforte). The paper include a detailed inventory of surfaces and terrace levels and their incision sequence which allow stablish a relative chronology of geomorphic evolution at this area of NW Spain during meso-cainozoic times.

Morphogenesis of the Ourense plains:(NW of Spain)

[EN] We present a geomorphological analysis of Ourense Province (NW Spain) characterized by: a general narrowing of the fluvial network, highlands with smooth reliefs partially eroded and lowlands with residual reliefs, several extensive plains of erosion frequently limited by fractures -among which Tertiary grabens are inserted-, some ?Hollow Surface?-type morphology, absence of sedimentary deposits outside the grabens, and a generalized outcrop of the Hercynian Massif substratum. Traditionally, this ?piano?s keyboard morphology? has been interpreted as expression of block tectonics in tensile regimen; instead we suggest the existence of: an isostatic upheaval simultaneous to a sequence of tectonic pulses of compressive regimen with activity in favour of transcurrent faults, a General Surface (R600), several plains that present a ?Hollow Surface?-type morphology (R1600 R1400 R1000), a generalized alteration that correspond to a same process of decomposition associated to fluctuating conditions of redox equilibrium, a erosional terraces related principaly to the palaeo-fluvial nets; moreover, we propose the existence of two morphoestructural lineament: the first one represented by the Fault of Vila Real (NE-SW) -a ramification of the ?Basal Pyrenean Overthrust?-, that would have been active at an early moment of the tectonic sequence with a left transcurrent fault, secondly the lineament represented by the Fault of Maceda (NNW-SSE) that would be related to the ?Fault System NW-SE? and would have produced a right transcurrent fault during a late tectonic pulse.

The stratigraphic record of the quaternary sea level fluctuations and the impact of the post-glacial sea level rise (Termination I) in the Adriatic basin (Mediterranean sea)

The modern stratigraphy of clastic continental margins is the result of the interaction between several geological processes acting on different time scales, among which sea level oscillations, sediment supply fluctuations and local tectonics are the main mechanisms. During the past three years my PhD was focused on understanding the impact of each of these process in the deposition of the central and northern Adriatic sedimentary successions, with the aim of reconstructing and quantifying the Late Quaternary eustatic fluctuations. In the last few decades, several Authors tried to quantify past eustatic fluctuations through the analysis of direct sea level indicators, among which drowned barrier-island deposits or coral reefs, or indirect methods, such as Oxygen isotope ratios (δ18O) or modeling simulations. Sea level curves, obtained from direct sea level indicators, record a composite signal, formed by the contribution of the global eustatic change and regional factors, as tectonic processes or glacial-isostatic rebound effects: the eustatic signal has to be obtained by removing the contribution of these other mechanisms. To obtain the most realistic sea level reconstructions it is important to quantify the tectonic regime of the central Adriatic margin. This result has been achieved integrating a numerical approach with the analysis of high-resolution seismic profiles. In detail, the subsidence trend obtained from the geohistory analysis and the backstripping of the borehole PRAD1.2 (the borehole PRAD1.2 is a 71 m continuous borehole drilled in -185 m of water depth, south of the Mid Adriatic Deep - MAD - during the European Project PROMESS 1, Profile Across Mediterranean Sedimentary Systems, Part 1), has been confirmed by the analysis of lowstand paleoshorelines and by benthic foraminifera associations investigated through the borehole. This work showed an evolution from inner-shelf environment, during Marine Isotopic Stage (MIS) 10, to upper-slope conditions, during MIS 2. Once the tectonic regime of the central Adriatic margin has been constrained, it is possible to investigate the impact of sea level and sediment supply fluctuations on the deposition of the Late Pleistocene-Holocene transgressive deposits. The Adriatic transgressive record (TST - Transgressive Systems Tract) is formed by three correlative sedimentary bodies, deposited in less then 14 kyr since the Last Glacial Maximum (LGM); in particular: along the central Adriatic shelf and in the adjacent slope basin the TST is formed by marine units, while along the northern Adriatic shelf the TST is represented by costal deposits in a backstepping configuration. The central Adriatic margin, characterized by a thick transgressive sedimentary succession, is the ideal site to investigate the impact of late Pleistocene climatic and eustatic fluctuations, among which Meltwater Pulses 1A and 1B and the Younger Dryas cold event. The central Adriatic TST is formed by a tripartite deposit bounded by two regional unconformities. In particular, the middle TST unit includes two prograding wedges, deposited in the interval between the two Meltwater Pulse events, as highlighted by several 14C age estimates, and likely recorded the Younger Dryas cold interval. Modeling simulations, obtained with the two coupled models HydroTrend 3.0 and 2D-Sedflux 1.0C (developed by the Community Surface Dynamics Modeling System - CSDMS), integrated by the analysis of high resolution seismic profiles and core samples, indicate that: 1 - the prograding middle TST unit, deposited during the Younger Dryas, was formed as a consequence of an increase in sediment flux, likely connected to a decline in vegetation cover in the catchment area due to the establishment of sub glacial arid conditions; 2 - the two-stage prograding geometry was the consequence of a sea level still-stand (or possibly a fall) during the Younger Dryas event. The northern Adriatic margin, characterized by a broad and gentle shelf (350 km wide with a low angle plunge of 0.02° to the SE), is the ideal site to quantify the timing of each steps of the post LGM sea level rise. The modern shelf is characterized by sandy deposits of barrier-island systems in a backstepping configuration, showing younger ages at progressively shallower depths, which recorded the step-wise nature of the last sea level rise. The age-depth model, obtained by dated samples of basal peat layers, is in good agreement with previous published sea level curves, and highlights the post-glacial eustatic trend. The interval corresponding to the Younger Dyas cold reversal, instead, is more complex: two coeval coastal deposits characterize the northern Adriatic shelf at very different water depths. Several explanations and different models can be attempted to explain this conundrum, but the problem remains still unsolved.

I materiali ceramici trasparenti: preparazione, caratterizzazione e correlazione microstruttura-proprietà

This thesis focuses on the ceramic process for the production of optical grade transparent materials to be used as laser hosts. In order to be transparent a ceramic material must exhibit a very low concentration of defects. Defects are mainly represented by secondary or grain boundary phases and by residual pores. The strict control of the stoichiometry is mandatory to avoid the formation of secondary phases, whereas residual pores need to be below 150 ppm. In order to fulfill these requirements specific experimental conditions must be combined together. In addition powders need to be nanometric or at least sub-micrometric and extremely pure. On the other hand, nanometric powders aggregate easily and this leads to a poor, not homogeneous packing during shaping by pressing and to the formation of residual pores during sintering. Very fine powders are also difficult to handle and tend to absorb water on the surface. Finally, the powder manipulation (weighting operations, solvent removal, spray drying, shaping, etc), easily introduces impurities. All these features must be fully controlled in order to avoid the formation of defects that work as scattering sources thus decreasing the transparency of the material. The important role played by the processing on the transparency of ceramic materials is often underestimated. In the literature a high level of transparency has been reported by many authors but the description of the experimental process, in particular of the powder treatment and shaping, is seldom extensively described and important information that are necessary to reproduce the described results are often missing. The main goal of the present study therefore is to give additional information on the way the experimental features affect the microstructural evolution of YAG-based ceramics and thus the final properties, in particular transparency. Commercial powders are used to prepare YAG materials doped with Nd or Yb by reactive sintering under high vacuum. These dopants have been selected as the more appropriate for high energy and high peak power lasers. As far as it concerns the powder treatment, the thesis focuses on the influence of the solvent removal technique (rotavapor versus spray drying of suspensions in ethanol), the ball milling duration and speed, suspension concentration, solvent ratio, type and amount of dispersant. The influence of the powder type and process on the powder packing as well as the pressure conditions during shaping by pressing are also described. Finally calcination, sintering under high vacuum and in clean atmosphere, and post sintering cycles are studied and related to the final microstructure analyzed by SEM-EDS and HR-TEM, and to the optical and laser properties.

Sea Level Variations from Decades to Millennia: A few Case Studies

The main goals of this Ph.D. study are to investigate the regional and global geophysical components related to present polar ice melting and to provide independent cross validation checks of GIA models using both geophysical data detected by satellite mission, and geological observations from far field sites, in order to determine a lower and upper bound of uncertainty of GIA effect. The subject of this Thesis is the sea level change from decades to millennia scale. Within ice2sea collaboration, we developed a Fortran numerical code to analyze the local short-term sea level change and vertical deformation resulting from the loss of ice mass. This method is used to investigate polar regions: Greenland and Antarctica. We have used mass balance based on ICESat data for Greenland ice sheet and a plausible mass balance for Antarctic ice sheet. We have determined the regional and global fingerprint of sea level variations, vertical deformations of the solid surface of the Earth and variations of shape of the geoid for each ice source mentioned above. The coastal areas are affected by the long wavelength component of GIA process. Hence understanding the response of the Earth to loading is crucial in various contexts. Based on the hypothesis that Earth mantle materials obey to a linear rheology, and that the physical parameters of this rheology can be only characterized by their depth dependence, we investigate the Glacial Isostatic Effect upon the far field sites of Mediterranean area using an improved SELEN program. We presented new and revised observations for archaeological fish tanks located along the Tyrrhenian and Adriatic coast of Italy and new RSL for the SE Tunisia. Spatial and temporal variations of the Holocene sea levels studied in central Italy and Tunisia, provided important constraints on the melting history of the major ice sheets.

Oltre Oceano: Altri orizzonti del possibile. Epistemiologie di Abya Yala e progettualità esistenziale “Lekil Kuxlejal,Sumak Kawsay, Kajkrasa Ruyina”. Filosofie della Terra per una Pedagogia del Buen Vivir

Questo elaborato propone alcune riflessioni sulla necessità urgente di un nuovo paradigma educativo, mediante la re-organizzazione delle scienze della conoscenza, scienze in parole di Morin, “disgiunte e frazionate, inadeguate ad affrontare problemi che richiedono oggi approcci multidisciplinari”. La sfida: affrontare i nuovi problemi di una convivenza planetaria, attraverso le connessioni del pensiero ecologico, in questo studio asse centrale delle cosmovisioni e della Sapienza ancestrale dei Popoli di AbyaYala (America Latina). Popoli in cui la Vita come orizzonte di Armonia ed Equilibrio si concretizza in pratiche di Vita Quotidiana grazie ad una Pedagogia del BuenVivir, inclusiva e partecipativa, rispettosa della diversità biologica e delle differenze culturali, nonché della Sacralità della Terra e della Vita in tutte le sue manifestazioni. La cornice teorica considerata fa riferimento in modo particolare a: L’Ecologia della Mente (Bateson); Il problematicismo Pedagogico e l’Educazione alla Progettualità Esistenziale (G.M.Bertin, Contini); l’Ecologia dei Saperi e le Epistemologie del Sud (Boaventura di Sousa Santos, sociologo portoghese), in modo da tessere ponti di dialogo fra le diverse discipline, in particolare fra la pedagogia, la geografia, l’antropologia, la filosofia, la sociologia, la letteratura, il diritto e anche con le neuroscienze.

Studio dei movimenti verticali del suolo in Europa occidentale da dati gps

La tecnica di posizionamento GPS costituisce oggi un importante strumento per lo studio di diversi processi tettonici e geodinamici a diverse scale spaziali. E’ possibile infatti usare dati GPS per studiare sia i movimenti delle placche tettoniche a scala globale, sia i lenti movimenti relativi attraverso singole faglie. I campi di applicazione del GPS sono aumentati considerevolmente negli ultimi anni grazie all’incremento del numero di stazioni distribuite sulla Terra e al perfezionamento delle procedure di misura ed elaborazione dati. Tuttavia mentre le velocità di spostamento orizzontali sono da tempo largamente studiate, quelle verticali non lo sono altrettanto perché richiedono il raggiungimento di precisioni sub millimetriche e risultano inoltre affette da numerose fonti di errore. Lo scopo di questo lavoro è quello di ricavare i tassi di deformazione verticale della litosfera in Europa Occidentale a partire dalle misure di fase GPS, passando per l’analisi delle serie temporali, e di correggere tali velocità per il contributo dell’aggiustamento glacio-isostatico (Glacial Isostatic Adjustment, GIA), modellato utilizzando il software SELEN (SEa Level EquatioN solver). Quello che si ottiene è un campo di velocità depurato dal contributo del GIA e rappresentante una stima dei tassi di deformazione verticale relativi all’area in esame associati a processi deformativi diversi dal GIA.

Wet chemistry synthesis towards nanostructures of thermoelectric antimonides

Die vorliegende Arbeit befasst sich mit der Synthese von nanostrukturierten Antimoniden, wobei die folgenden beiden Themen bearbeitet wurden: rnAus chemischer Sicht wurden neue Synthesewege entwickelt, um Nanopartikel der Verbindungen in den binären Systemen Zn-Sb und Fe-Sb herzustellen (Zn4Sb3, ZnSb, FeSb2, Fe1+xSb). Anders als in konventionellen Festkörperreaktionen, die auf die Synthese von Bulk-Materialien oder Einkristallen zielen, muss die Synthese von Nanopartikeln Agglomerate und Ostwald-Wachstum vermeiden. Daher benötigen annehmbare Reaktionszeiten und vergleichsweise tiefe Reaktionstemperaturen kurze Diffusionswege und tiefe Aktivierungsbarrieren. Demzufolge bedient sich die Synthese der Reaktion von Antimon-Nanopartikeln und geeigneten molekularen oder nanopartikulären Edukten der entsprechenden Übergangsmetalle. Zusätzlich wurden anisotrope ZnSb Strukturen synthetisiert, indem eine Templat-Synthese mit Hilfe von anodisierten Aluminiumoxid- oder Polycarbonat-Membranen angewandt wurde. rnDie erhaltenen Produkte wurden hauptsächlich durch Röntgen-Diffraktion und Elektronenmikroskopie untersucht. Die Auswertung der Pulver Röntgendiffraktions-Daten stellte eine Herausforderung dar, da die Nanostrukturierung und die Anwesenheit von mehreren Phasen zu verbreiterten und überlagernden Reflexen führen. Zusätzliche Fe-Mößbauer Messungen wurden im Falle der Fe-Sb Produkte vorgenommen, um detailliertere Informationen über die genaue Zusammensetzung zu erhalten. Die erstmals hergestellte Phase Zn1+xSb wurde einer detaillierten Kristallstrukturanalyse unterzogen, die mit Hilfe einer neuen Diffraktionsmethode, der automatisierten Elektronen Diffraktions Tomographie, durchgeführt wurde.rnrnAus physikalischer Sicht sind Zn4Sb3, ZnSb und FeSb2 interessante thermoelektrische Materialien, die aufgrund ihrer Fähigkeit thermische in elektrische Energie umzuwandeln, großes Interesse geweckt haben. Nanostrukturierte thermoelektrische Materialien zeigen dabei eine höhere Umwandlungseffizienz zu erhöhen, da deren thermische Leitfähigkeit herabgesetzt ist. Da thermoelektrische Bauteile aus dichten Bulk-Materialien gefertigt werden, spielte die Verfestigung der synthetisierten nanopartikulären Pulver eine große Rolle. Die als „Spark Plasma Sintering“ bezeichnete Methode wurde eingesetzt, um die Proben zu pressen. Dies ermöglicht schnelles Heizen und Abkühlen der Probe und kann so das bei klassischen Heißpress-Methoden unvermeidliche Kristallitwachstum verringern. Die optimalen Bedingungen für das Spark Plasma Sintern zu finden, ist Inhalt von bestehender und weiterführender Forschung. rnEin Problem stellt die Stabilität der Proben während des Sinterns dar. Trotz des schnellen Pressens wurde eine teilweise Zersetzung im Falle des Zn1+xSb beobachtet, wie mit Hilfe von Synchrotrondiffraktionsuntersuchungen aufgedeckt wurde. Morphologie und Dichte der verschiedenen verfestigten Materialien wurden mittels Rasterelektronenmikroskopie und Lasermikroskopie bestimmt. Die Gitterdynamik wurde mit Hilfe von Wärmekapazitätsmessungen- und inelastischer Kern-Streuung untersucht. Die Wärmeleitfähigkeit der nanostrukturierten Materialien ist im Vergleich zu den Festkörpern ist drastisch reduziert - im Falle des FeSb2 um mehr als zwei Größenordnungen. Abhängig von der Zusammensetzung und mechanischen Härte wurden für einen Teil der verfestigten Nanomaterialien die thermoelektrische Eigenschaften, wie Seebeck Koeffizient, elektrische und Wärmeleitfähigkeit, gemessen.rn

Global and regional sea level variations in the recent past and future: insight from observations and modeling

This work is focused on the analysis of sea–level change (last century), based mainly on instrumental observations. During this period, individual components of sea–level change are investigated, both at global and regional scales. Some of the geophysical processes responsible for current sea-level change such as glacial isostatic adjustments and current melting terrestrial ice sources, have been modeled and compared with observations. A new value of global mean sea level change based of tide gauges observations has been independently assessed in 1.5 mm/year, using corrections for glacial isostatic adjustment obtained with different models as a criterion for the tide gauge selection. The long wavelength spatial variability of the main components of sea–level change has been investigated by means of traditional and new spectral methods. Complex non–linear trends and abrupt sea–level variations shown by tide gauges records have been addressed applying different approaches to regional case studies. The Ensemble Empirical Mode Decomposition technique has been used to analyse tide gauges records from the Adriatic Sea to ascertain the existence of cyclic sea-level variations. An Early Warning approach have been adopted to detect tipping points in sea–level records of North East Pacific and their relationship with oceanic modes. Global sea–level projections to year 2100 have been obtained by a semi-empirical approach based on the artificial neural network method. In addition, a model-based approach has been applied to the case of the Mediterranean Sea, obtaining sea-level projection to year 2050.

Polymer surfaces on small length- and short time-scales

The behaviour of a polymer depends strongly on the length- and time scale as well as on the temperature rnat which it is probed. In this work, I describe investigations of polymer surfaces using scanning probe rnmicroscopy with heatable probes. With these probes, surfaces can be heated within seconds down to rnmicroseconds. I introduce experiments for the local and fast determination of glass transition and melting rntemperatures. I developed a method which allows the determination of glass transition and melting rntemperatures on films with thicknesses below 100 nm: A background measurement on the substrate was rnperformed. The resulting curve was subtracted from the measurement on the polymer film. The rndifferential measurement on polystyrene films with thicknesses between 35 nm and 160 nm showed rncharacteristic signals at 95 ± 1 °C, in accordance with the glass transition of polystyrene. Pressing heated rnprobes into polymer films causes plastic deformation. Nanometer sized deformations are currently rninvestigated in novel concepts for high density data storage. A suitable medium for such a storage system rnhas to be easily indentable on one hand, but on the other hand it also has to be very stable towards rnsurface induced wear. For developing such a medium I investigated a new approach: A comparably soft rnmaterial, namely polystyrene, was protected with a thin but very hard layer made of plasma polymerized rnnorbornene. The resulting bilayered media were tested for surface stability and deformability. I showed rnthat the bilayered material combines the deformability of polystyrene with the surface stability of the rnplasma polymer, and that the material therefore is a very good storage medium. In addition we rninvestigated the glass transition temperature of polystyrene at timescales of 10 µs and found it to be rnapprox. 220 °C. The increase of this characteristic temperature of the polymer results from the short time rnat which the polymer was probed and reflects the well-known time-temperature superposition principle. rnHeatable probes were also used for the characterization of silverazide filled nanocapsules. The use of rnheatable probes allowed determining the decomposition temperature of the capsules from few rnnanograms of material. The measured decomposition temperatures ranged from 180 °C to 225 °C, in rnaccordance with literature values. The investigation of small amounts of sample was necessary due to the rnlimited availability of the material. Furthermore, investigating larger amounts of the capsules using rnconventional thermal gravimetric analysis could lead to contamination or even damage of the instrument. rnBesides the analysis of material parameters I used the heatable probes for the local thermal rndecomposition of pentacene precursor material in order to form nanoscale conductive structures. Here, rnthe thickness of the precursor layer was important for complete thermal decomposition. rnAnother aspect of my work was the investigation of redox active polymers - Poly-10-(4-vinylbenzyl)-10H-rnphenothiazine (PVBPT)- for data storage. Data is stored by changing the local conductivity of the material rnby applying a voltage between tip and surface. The generated structures were stable for more than 16 h. It rnwas shown that the presence of water is essential for succesfull patterning.

Die Einheit des Bewusstseins und das Phänomen der Synästhesie

Synästhetiker schmecken Berührungen, sehen Farben und Formen, wenn sie Musik hören oder einen Duft riechen. Es wurden auch so außergewöhnliche Formen wie Wochentage-Farben-, Berührung-Geruch- oder Schmerz-Farben-Synästhesien gefunden. Die von Neuro- wissenschaftlern und Philosophen als „Bindung“ genannte Fähigkeit mehrere Reize, die in verschiedenen Hirnarealen verarbeitet werden, miteinander zu koppeln und zu einer einheitlichen Repräsentation bzw. erfahrenen Einheit des Bewusstseins zusammenzufassen, betrifft jeden gesunden Mensch. Synästhetiker sind aber Menschen, deren Gehirne zur „Hyperbindung“ oder zum hyperkohärentem Erleben befähigt sind, da bei ihnen wesentlich mehr solcher Kopplungen entstehen. Das Phänomen der Synästhesie ist schon seit mehreren Jahrhunderten bekannt, aber immer noch ein Rätsel. Bisher glaubten Forscher, solche Phänomene beruhten bloß auf überdurchschnittlich dichten neuronalen Verdrahtungen zwischen sensorischen Hirnregionen. Aus der aktuellen Forschung kann man jedoch schließen, dass die Ursache der Synästhesie nicht allein eine verstärkte Verbindung zwischen zwei Sinneskanälen ist. Laut eigener Studien ist der Sinnesreiz selbst sowie seine fest verdrahteten sensorischen Pfade nicht notwendig für die Auslösung des synästhetischen Erlebens. Eine grundlegende Rolle spielt dabei dessen Bedeutung für einen Synästhetiker. Für die Annahme, dass die Semantik für die synästhetische Wahrnehmung das Entscheidende ist, müssten synästhetische Assoziationen ziemlich flexibel sein. Und genau das wurde herausgefunden, nämlich, dass normalerweise sehr stabile synästhetische Assoziationen unter bestimmten Bedingungen sich auf neue Auslöser übertragen lassen. Weitere Untersuchung betraf die neu entdeckte Schwimmstil-Farbe-Synästhesie, die tritt hervor nicht nur wenn Synästhetiker schwimmen, aber auch wenn sie über das Schwimmen denken. Sogar die Namen dieser charakteristischen Bewegungen können ihre Farbempfindungen auslösen, sobald sie im stimmigen Kontext auftauchen. Wie man von anderen Beispielen in der Hirnforschung weiß, werden häufig benutzte neuronale Pfade im Laufe der Zeit immer stärker ausgebaut. Wenn also ein Synästhetiker auf bestimmte Stimuli häufig stoßt und dabei eine entsprechende Mitempfindung bekommt, kann das mit der Zeit auch seine Hirnanatomie verändern, so dass die angemessenen strukturellen Verknüpfungen entstehen. Die angebotene Erklärung steht also im Einklang mit den bisherigen Ergebnissen. Die vorliegende Dissertation veranschaulicht, wie einheitlich und kohärent Wahrnehmung, Motorik, Emotionen und Denken (sensorische und kognitive Prozesse) im Phänomen der Synästhesie miteinander zusammenhängen. Das synästhetische nicht-konzeptuelle Begleiterlebnis geht mit dem konzeptuellen Inhalt des Auslösers einher. Ähnlich schreiben wir übliche, nicht-synästhetische phänomenale Eigenschaften den bestimmten Begriffen zu. Die Synästhesie bringt solche Verschaltungen einfach auf beeindruckende Weise zum Ausdruck und lässt das mannigfaltige Erleben stärker integrieren.

Thermoelectric performance of p-type TiCoSb half-Heusler compounds - Intrinsic phase separation and charge carrier concentration optimization as key to high efficiency

The world's rising demand of energy turns the development of sustainable and more efficient technologies for energy production and storage into an inevitable task. Thermoelectric generators, composed of pairs of n-type and p-type semiconducting materials, di¬rectly transform waste heat into useful electricity. The efficiency of a thermoelectric mate¬rial depends on its electronic and lattice properties, summarized in its figure of merit ZT. Desirable are high electrical conductivity and Seebeck coefficients, and low thermal con¬ductivity. Half-Heusler materials are very promising candidates for thermoelectric applications in the medium¬ temperature range such as in industrial and automotive waste heat recovery. The advantage of Heusler compounds are excellent electronic properties and high thermal and mechanical stability, as well as their low toxicity and elemental abundance. Thus, the main obstacle to further enhance their thermoelectric performance is their relatively high thermal conductivity.rn rnIn this work, the thermoelectric properties of the p-type material (Ti/Zr/Hf)CoSb1-xSnx were optimized in a multistep process. The concept of an intrinsic phase separation has recently become a focus of research in the compatible n-type (Ti/Zr/Hf)NiSn system to achieve low thermal conductivities and boost the TE performance. This concept is successfully transferred to the TiCoSb system. The phase separation approach can form a significant alternative to the previous nanostructuring approach via ball milling and hot pressing, saving pro¬cessing time, energy consumption and increasing the thermoelectric efficiency. A fundamental concept to tune the performance of thermoelectric materials is charge carrier concentration optimization. The optimum carrier concentration is reached with a substitution level for Sn of x = 0.15, enhancing the ZT about 40% compared to previous state-of-the-art samples with x = 0.2. The TE performance can be enhanced further by a fine-tuning of the Ti-to-Hf ratio. A correlation of the microstructure and the thermoelectric properties is observed and a record figure of merit ZT = 1.2 at 710°C was reached with the composition Ti0.25Hf0.75CoSb0.85Sn0.15.rnTowards application, the long term stability of the material under actual conditions of operation are an important issue. The impact of such a heat treatment on the structural and thermoelectric properties is investigated. Particularly, the best and most reliable performance is achieved in Ti0.5Hf0.5CoSb0.85Sn0.15, which reached a maximum ZT of 1.1 at 700°C. The intrinsic phase separation and resulting microstructure is stable even after 500 heating and cooling cycles.

One small scan for radiology, one giant leap for forensic medicine - Post-mortem imaging replaces forensic autopsy in a case of traumatic aortic laceration

The questions of cause and manner of death are the most pressing ones in any forensic investigation. Traditionally, autopsy is the means to provide answers to these questions and despite the increasing use of CT and MR in the post-mortem setting, imaging has usually been an adjunct to forensic autopsy. Here we describe a case where post-mortem CT and MR were performed instead of autopsy, at the request of the responsible public prosecutor. The forensic conclusions derived from imaging, including cause and manner of death were accepted by the legal authorities, thereby setting precedence for future cases. This case represents a landmark in forensic medicine and is another step toward the full realization of minimally invasive forensic autopsy.

Primary ciliary dyskinesia

Primary ciliary dyskinesia (PCD) is an autosomal recessive disease with an incidence estimated between 1:2,000 and 1:40,000. Ciliated epithelia line the airways, nasal and sinus cavities, Eustachian tube and fallopian tubes. Congenital abnormalities of ciliary structure and function impair mucociliary clearance. As a consequence, patients present with chronic sinopulmonary infections, recurrent glue ear and female subfertility. Similarities in the ultrastructure of respiratory cilia, nodal cilia and sperm result in patients with PCD also presenting with male infertility, abnormalities of left-right asymmetry (most commonly situs inversus totalis) and congenital heart disease. Early diagnosis is essential to ensure specialist management of the respiratory and otological complications of PCD. Diagnostic tests focus on analysis of ciliary function and electron microscopy structure. Analysis is technically difficult and labour intensive. It requires expertise for interpretation, restricting diagnosis to specialist centres. Management is currently based on the consensus of experts, and there is a pressing need for randomised clinical trials to inform treatment.