Rheological and thermal characteristics of wheat gluten biopolymers plasticized with glycerol

The objective this work was to obtain bioplastics from mixtures of wheat gluten and glycerol by two different processes and evaluate their respective rheological properties. The mixtures and their respective bioplastics were obtained through direct batch mixing under approximately adiabatic and isothermal conditions. The bioplastics showed high values for the storage (G') and loss (G") moduli, suggesting a stronger protein network formed in both processes. The temperature onset and the percentage of weight loss to be estimated were found to be near in both bioplastics. The bioplastics have demonstrated to be materials of interesting potential of use as biodegradable barrier materials.

New strategies for treatment and reuse of spent sulfidic caustic stream from petroleum industry

This work examines traditional and new routes for removal of H2S and other sulfur compounds from spent sufidic caustic (SSC). SH- (hydrogenosulfide) and S2- (sulfide) ions were quantitatively oxidized at 25 ºC using H2O2, NaOCl or a spent sulfochromic mixture. SH-/S2- ions were also removed via reaction with freshly prepared iron or manganese hydroxides, or after passing the SSC through strong basic anion exchange resins (OH- form). The treated caustic solution, as well as iron/manganese hydroxides, removed H2S from diesel samples at 25 ºC. SSC treatment via strong basic anion-exchange resins produced the treated caustic solution with the highest free alkalinity.

Evaluation of plant growth-promoting and bioprotecting rhizobacteria on wheat crop

Experiments were carried out under laboratory, growth chamber, and field conditions to evaluate the effect of Plant growth-promoting and bioprotecting rhizobacteria (PGPBR) seed treatment on seed pathogens, seed germination, plant growth, and grain yield of wheat (Triticum aestivum). Most of the PGPBR strongly reduced the recovery of the pathogens from infected wheat seeds. All treatments, except the chemical iprodione + thiram, significantly promoted plant growth over the nontreated control. Psudomonas putida biotype A (11) and P. agglomerans (14) showed the greatest effects. Field experiments, carried out at two locations, indicated that all treatments, except P. chlororaphis (42), significantly increased seedling emergence of wheat . In Pato Branco, PR, P. putida biotype A (11) and P. putida biotype B (44) presented the best results, both being superior to fungal biological and chemical treatments. In Passo Fundo P. putida biotype A (11) and P. putida biotype B (17 and 44) significantly improved yield over the nontreated control. Yield increases of these three PGPBR were similar to the chemical treatment iprodione + thiram. In Pato Branco, P. putida biotype A (11) and P. putida biotype B (17), as well as the chemical treatment, provided significant increase over the nontreated control. Yield increases by the PGPBR varied from 18% to 22% in Passo Fundo and from 27% to 28% in Pato Branco.

Potentials of process intensification in the Finnish petrochemical industry

This research was motivated by the need to examine the potential application areas of process intensification technologies in Neste Oil Oyj. According to the company’s interest membrane reactor technology was chosen and applicability of this technology in refining industry was investigated. Moreover, Neste Oil suggested a project which is related to the CO2 capture from FCC unit flue gas stream. The flowrate of the flue gas is 180t/h and consist of approximately 14% by volume CO2. Membrane based absorption process (membrane contactor) was chosen as a potential technique to model CO2 capture from fluid catalytic cracking (FCC) unit effluent. In the design of membrane contactor, a mathematical model was developed to describe CO2 absorption from a gas mixture using monoethanole amine (MEA) aqueous solution. According to the results of literature survey, in the hollow fiber contactor for laminar flow conditions approximately 99 % percent of CO2 can be removed by using a 20 cm in length polyvinylidene fluoride (PDVF) membrane. Furthermore, the design of whole process was performed by using PRO/II simulation software and the CO2 removal efficiency of the whole process obtained as 97 %. The technical and economical comparisons among existing MEA absorption processes were performed to determine the advantages and disadvantages of membrane contactor technology.

Corporate Social Responsibility in Global Mining Industry

Corporate Social Responsibility is company’s interest and actions towards its environment and the society that the company takes from its free will, to give back to the community and environment. Corporate Social Responsibility is current topic as companies are challenged to take responsibility for their action, due to the constant tightening environmental legislations and raising pressure for transparency from the public. The objective of this Master’s Thesis research is to study if Corporate Social Responsibility affects suppliers’ brand image and mining companies’ buying decisions within global mining industry. The research method is qualitative and the research is conducted with secondary and primary research methods. The research aims to find out what are the implications of the research for the case company Larox. The objective is to answer to the question; how should case company Larox start to develop Corporate Social Responsibility (CSR) program of its own, and how the case company could benefit from CSR as a competitive advantage and what actions could be taken in the company marketing. Conclusions are drawn based on both the secondary and primary research results. Both of the researches imply that CSR is well present in the global mining industry, and that suppliers’ CSR policy has positive effect on company image, which positively affects company’s brand, and furthermore brand has a positive effect on mining companies buying decision. It can be concluded that indirectly CSR has an effect on buying decisions, and case company should consider developing a CSR program of its own.

Defining the location factors of new manufacturing site in chemical industry

The objective of this thesis is to examine the factors that have an impact on the location decision of new manufacturing site and to create the relative order of importance of these factors by analytic hierarchy process (AHP). The decision making process especially related to the location selection and the measurement of the location factors are also examined. In theoretical part the character of decision making process and the relevant methods are introduced. Based on the previous studies of other researchers, the location factors are examined and the main research method, analytic hierarchy process, is also introduced. The empirical part of the study mainly follows the phases of decision making process and is emphasized on the main stages of analytic hierarchy process; building the hierarchy, defining the priorities and analyzing the results. The hierarchy is constructed from seven main criteria which all have several sub criteria. The evaluation of the hierarchy is implemented at the group decision making –laboratory and there can be seen significant differences between the importance of criteria. The final stage in the study is to create the appropriate measurement scales to the chosen criteria.

Cytopathological characterization of Mal de Río Cuarto virus in corn, wheat and barley

The Mal de Río Cuarto disease is caused by Mal de Río Cuarto virus (MRCV) transmitted by Delphacodes kuscheli. Comparative studies were carried out on the cytopathological alterations produced by MRCV in corn (Zea mays), wheat (Triticum aestivum) and barley (Hordeum vulgare), as seen with a transmission electron microscope. Corn plants were infected with viruliferous D. kuscheli collected from the endemic disease area (i.e. Río Cuarto County, Córdoba, Argentina). For the viral transmission to small grain cereal plants, laboratory rared insects were used. In this case, the inoculum source was wheat and barley plants infected with MRCV isolate grown in a greenhouse. Leaf samples with conspicuous symptoms were collected: enations and size reduction in corn; crenatures, swelling veins and dark green color in small grain cereals. Viral infection was corroborated by DAS-ELISA. Viroplasms containing complete and incomplete virus particles and fibrillar material were found in the cytoplasm of infected cells in all species. Mature virions were between 60 and 70 nm diameter. In wheat and barley, viroplasms and dispersed particles were observed only in phloem, while in corn virions were also found in cells of the bundle sheath. Crystalline arrays of particles were detected in corn enation constitutive cells. Tubular inclusions were found only in wheat samples. The three species showed abnormalities in the chloroplasts of affected cells. The results showed that MRCV cytopathology has similarities with other viruses from the genus Fijivirus, family family Reoviridae, but slight differences depending upon the host plant.

Harmonized performance measurement system for basic industry's service centers

The objective of this study is to create measurement system that is capable to measure performance in basic industry’s service centers. First it is examined what is performance and how it can be measured. The study also introduces commonly known measurement frameworks. After theory the study investigates how companies in the field of basic industry measure their operations in practise. The investigation is done examining three case examples and by analyzing survey results from basic industry companies. On the survey results focus is on what meters and measurement systems companies use. It is also viewed what measurement problems companies have faced. In the applied part of the study harmonized performance measurement system is created. The framework of the measurement system is introduced and measurement system for the target company is created. The target company felt that the harmonized performance measurement system has good potential and continues to develop it further.

Genetic variation among pathogens causing "Helminthosporium" diseases of rice, maize and wheat

Twenty isolates of four fungal species, agents of "Helminthosporium" diseases in cereals, were collected from different regions: nine Bipolarisoryzae isolated from rice (Oryza sativa), seven B.sorokiniana from wheat (Triticum aestivum), two B. maydis, and two Exserohilumturcicum from maize (Zea mays). The strains were compared by PCR-RFLP and RAPD analysis. Size polymorphism among the isolates in the ITS region comprising the 5.8 S rDNA indicated genetic differences among the isolates, while a UPGMA phenogram constructed after the digestion of this region with restriction enzymes showed inter- and intra-specific polymorphism. The RAPD profiles indicated an expressive level of polymorphism among different species, compared with a low level of polymorphism among isolates of the same species. A UPGMA phenogram grouped the isolates according to the species and their host plant. RAPD profiles did not reveal polymorphism that directly correlated climatic factors with geographic source of the isolates of B. sorokiniana, and B. oryzae. Teleomorphic species revealed high similarity with their correspondent anamorphs.

Resistance spectra of wheat cultivars and virulence diversity of Magnaporthe grisea isolates in Brazil

Seventy-two monoconidial isolates of Magnaporthe grisea were obtained from the States of Mato Grosso do Sul and Paraná. The isolates were inoculated on seedlings of 20 wheat (Triticum aestivum) cultivars under greenhouse conditions. The virulence diversity of M. grisea was assessed based on compatible and incompatible reactions of leaf blast on wheat cultivars. Fifty-four distinct virulence patterns were identified on test cultivars among the isolates collected from the two wheat growing States. Sixteen of these isolates corresponding to 22.2% showed similar virulence pattern. None of the wheat cultivars was resistant to all isolates of M. grisea, but the cultivars differed in degree of resistance as measured by the relative spectrum of resistance (RSR) and disease index (DI). Among the cultivars the RSR ranged from 0 to 53.3% and DI from 0.4662 to 0.9662 (0 to 1 scale). The wheat cultivar BR18 exhibited a broad resistance spectrum in relation to the rest of the tested cultivars to the isolates of M. grisea, and can be used in wheat resistance breeding.

Efeito do Soil-borne wheat mosaic virus sobre o metabolismo de cinco genótipos de trigo com diferentes níveis de resistência à doença

Com o objetivo de conhecer as alterações metabólicas promovidas pelo Soil-borne wheat mosaic virus (SBWMV), um dos vírus economicamente mais importantes da cultura do trigo (Triticum aestivum), foram analisados os níveis de proteínas solúveis e determinadas as atividades da peroxidase e da protease em quatro cultivares (BRS Guabiju, BRS 194, BRS 179, BR 23) e uma linhagem (PF 980524) de trigo com diferentes níveis de resistência ao vírus. Os dados obtidos foram submetidos à análise de variância, comparando-se as médias, pelo Teste de Duncan a 5%. Os níveis de proteínas solúveis foram mais elevados nas plantas sem sintomas, enquanto que as atividades da peroxidase e da protease foram maiores em plantas com sintoma de mosaico do que em plantas assintomáticas. Além disso, pode-se constatar que quanto maior a suscetibilidade do genótipo, maior o nível de atividade da protease. Estes resultados são promissores para estudos de inibição da protease para controle de viroses.

Variability of the wheat powdery mildew pathogen Blumeria graminis f. sp. tritici in the 2003 crop season

Wheat (Triticum aestivum) powdery mildew, caused by the biotrophic fungus Blumeria graminis f. sp. tritici, is one of the most severe foliar diseases attacking this crop, reducing grain yields by 10% to 62% in Brazil. The disease can be controlled by genetic resistance of the host, but the pathogen has physiological specialization, which enables it to infect wheat cultivars that have remained resistant for years. The objective of this work was to evaluate the variability of pathogenic strains of B. graminis f. sp. tritici collected in Brazil and the effectiveness of wheat resistance genes to powdery mildew in the 2003 crop season. Plants of a differential series were inoculated with each monopustular isolate. Thirty-one combinations of effective and ineffective resistance genes were identified. Only the gene Pm4a+... remained totally effective to all isolates, and gene Pm6 was highly effective (below 10% of susceptibility), whereas genes Pm3a and Pm8 were totally ineffective (susceptible to all isolates). Genes Pm3c, D1, and D2 showed low effectiveness (above 50% of susceptibility), and genes Pm1, 2, 4a, 1+?, and 2+Mld had mean effective results to most strains (susceptibility between 10% and 49%). The virulence formula Pm1, 3c, 4a, 6, 1+?, 2+Mld, 4a+..., D2 (effective genes) / 2, 3a, 8, D1 (ineffective genes) was most frequently found, accounting for 15% of the occurrences. The most frequent number of ineffective genes was seven, ranging from three to ten.