Implantació d’una nau industrial destinada a la fabricació de contenidors de reciclatge

El projecte s’ha realitzat a CONSTRUCCIÓ TÈCNICA INDUSTRIAL DEL TERSLU, empresa situada a Aiguaviva, municipi de Girona. Aquesta empresa es dedica a la construcció metàl•lica, però sobretot a la construcción d’estructures metàl•liques lleugeres i pesades, caldereria i manteniment industrial. L’objecte del projecte és buscar un mètode per la reducció del temps de fabricació imillorar la distribució en planta. Per a això s’han d’investigar diferents alternatives icomparar-les entre si per arribar a un resultat final satisfactori. La implantació de la nova distribució en planta com a objectiu final vol aconseguiraugmentar els beneficis globals de l’empresa. Això s.aconsegueix analitzant diferentsdistribucions, l’aplicació de diferents processos de fabricació i muntatge i augmentant lacoordinació entre el departament tècnic i el taller

CO2 utilization in the perspective of industrial ecology, an overview

Carbon dioxide emissions from anthropic activities have accumulated in the atmosphere in excess of 800 Gigatons since preindustrial times, and are continuously increasing. Among other strategies, CO2 capture and storage is one option to mitigate the emissions from large point sources. In addition, carbon dioxide extraction from ambient air is assessed to reduce the atmospheric concentration of CO2. Both direct and indirect (through photosynthesis) pathways are possible. Geological sequestration has significant disadvantages (high cost, low public acceptance, long term uncertainty) whereas carbon dioxide recycling (or utilization) is more consistent with the basic principle of industrial ecology, almost closing material cycles. In this article, a series of technologies for CO2 capture and valorization is described as integrated and optimized pathways. This integration increases the environmental and economic benefits of each technology. Depending on the source of carbon dioxide, appropriate capture and valorization processes are evaluated based on material and energy constraints.

Estudi d’un assecador industrial: simulació i optimització de l’assecatge de xoriç mitjançant programari informàtic CFD

Una empresa familiar d’embotits ecològics especialitzada en l’elaboració de xoriç, volampliar la seva producció. Té com apart clau el procés d’estufatge i l’assecament. Aquests processos, que tenen lloc alsassecadors, consisteixen en fer re-circular aire a unes temperatures determinades durant unscerts temps, refredant aquest aire quan surt de la sala per extreure’n part del vapor d’aiguaque conté, i tornant-lo a escalfar per poder absorbir més aigua en tornar entrar a la sala.L’abast d’aquest projecte consisteix en la descripció del funcionament dels assecadors,i la realització de simulacions de flux d’aire i temperatura per tal de poder optimitzar unassecador concret. Dins aquest assecador es faran modificacions com pot ser l’alçada lliure quequeda entre la filera més elevada de xoriç i el sostre o el radi inferior que tenen aquestsaparells per tal d’obtenir una geometria òptima d’una sala d’assecatge. L’estudi que es duu a terme consta del comportament del flux d’aire i del flux detemperatura per tal de poder observar els punts crítics i poder determinar els paràmetres queinflueixen en el seu bon funcionament

Cámaras de Comercio: comparativa entre la Cámara de Comercio de Barcelona y la Cámara de Comercio Española en Gran Bretaña

Les Cambres de Comerç son corporacions de dret públic que realitzen funcions de caràcter consultiu i de col·laboració amb les Administracions Públiques. En l’actual context econòmic han adquirit una especial rellevància de cara a la regeneració del teixit econòmic i la creació de llocs de treball i es consolida la seva finalitat de representació, promoció i defensa dels interessos generals del comerç, així com la prestació de serveis a totes les empreses. Aquestes institucions van néixer a Espanya a finals del segle XIX, concretament a l’any 1886, amb l’ intenció de representar els interessos generals de les empreses. Les Cambres seguien un model cameral continental caracteritzat per l’obligatorietat en l’adscripció de les persones que exercien activitats empresarials amb el corresponent pagament de quotes. El recurs cameral representava la principal font d’ingressos de les Cambres, pel que l’entrada en vigor del Reial Decret 13/2010 que eliminava l’obligatorietat del pagament de la quota a les empreses va provocar un canvi molt important de les seves funcions. El legislador va introduir aquest canvi per dos motius. Per una banda, tenia com objectiu impulsar a les Cambres com entitats de prestació de serveis amb la finalitat de reforçar la seva eficiència en el desenvolupament de les funcions que se l’hi atribuïen. I per altra, considerava que l’eliminació d’aquesta obligatorietat faria que les empreses disposessin de més recursos en la difícil situació econòmica existent. Les Cambres de Comerç van haver d’adaptar-se a aquesta nova situació i intentar aconseguir els recursos econòmics suficients per la seva subsistència. Dos bons exemples son la Cambra de Comerç de Barcelona i la Cambra de Comerç Espanyola de Gran Bretanya que, mitjançant una proposta de serveis d’alta qualitat, com els serveis d’internacionalització o els serveis de consultoria, estan captant a un gran nombre d’empreses. La realitat en la que ens trobem és que certament les Cambres de Comerç, tant les que estan domiciliades en el territori nacional com les que estan establertes a l’estranger, estan oferint uns serveis molt importants per a les petites i mitjanes empreses en l’àmbit de la internacionalització i augment de la seva competitivitat. La seva experiència, el seu coneixement, el seu gran equip de treball i les seves col·laboracions amb altres entitats són elements diferencials d’aquestes corporacions que faciliten a les empreses el procés d’iniciar la seva expansió a noves línies de negoci o a nous mercats amb les màximes garanties.

Is Transnational Private Regulation Potentially an Effective Means of Promoting Collective Industrial Relations?

This paper asks whether collective industrial relations can be promoted by means other than seeking change in public policy. Recent research points to the increasing significance of transnational private regulation (TPR) in developing economies. There is an emerging consensus that market incentives to improve wages and conditions of work can have a modest positive effect on measurable outcomes like hours of work, and health and safety. However, it appears that TPR has little impact on the capacity of workers to pursue such improvements for themselves via collective action. The paper takes a closer look at the potential of TPR to enhance worker voice and participation. It argues that this potential cannot be properly evaluated without understanding how local actors mobilise the social and political resources that TPR provides. The case studies presented show how different TPR schemes have been used by unions in Africa as a means to pursue the interests of members. The authors found that the scale of the impact of TPR in all of the contexts studied depended almost entirely on the existing capacities and resources of the unions involved. TPR led to the creation of collective industrial relations processes, or helped unions to ensure that certain enterprises participated in existing industrial relations processes, but did virtually nothing to enhance the political and organisational capacity of the unions to influence the outcomes of those processes in terms of wages and conditions of employment. The paper concludes that the potential of TPR to promote the emergence of collective industrial relations systems is very low.

The Spatial effects of transportation on industrial employment

This paper examines the direct and indirect impacts of transport infrastructure on industrial employment. We estimate regressions with spatial econometric methods using data from the Spanish regions for the period 1995-2008. We find that the density of motorways and the amount of port traffic (particularly general non-containerized and container traffic) are significant determinants of industrial employment in the region, while the effects of railway density and the amount of airport traffic are unclear. Our empirical analysis shows the existence of significant negative spatial spillovers for the density of motorways and levels of container port traffic while the impact of general non-containerized port traffic seems to be mainly local.

As "Disquisitiones" do naturalista Arruda da Câmara (1752-1811) e as relações entre a Química e a Fisiologia no final do Século das Luzes

This work is intended to rescue the field of validity of the "Disquisitiones" by the naturalist Arruda da Câmara placing them in the scientific and historical context of the end of the "Century of Light". Thus, a tentative is made here to reconstruct the debate established among the several theories that served as background of the relationships between Chemistry and Physiology of that time. In the present work is presented by the first time an integral translation of the "Disquisitiones" and a biographical resume of the naturalist in the historical context of his epoch in Northeast Brazil, especially in Pernambuco.

Avaliação quantitativa de cardenolídeos no cultivar experimental de Digitalis lanata do maciço do itatiaia e perspectivas de seu emprego industrial

The content of digoxin and lanatoside C (jointly quantified), lanatoside A, lanatoside B, glucoevatromonoside, odorobioside G, glucogitoroside, glucoverodoxine, glucodigifucoside and digitalinum verum was determined by HPLC in Digitalis lanata harvested in Brazil, as well as in clones industrially employed for the production of cardenolides. The Brazilian plants presented greater variation in the contents of cardenolides than the analyzed clones. Lanatoside C and digoxin concentrations were higher in the clones (6120±640 nmol/g dry leaf) than in the Brazilian plants (1820±900 nmol/g dry leaf). The concentrations of these glycosides were found to be within the range described for native species and also were similar to an European cultivar, what makes possible its industrial use for the cardenolides production.

Emprego de nebulizador pneumático de ICP-MS como câmara de diluição em sistemas de injeção em fluxo para determinações multielementares

An automatic dispenser based on a flow-injection system used to introduce sample and analytical solution into an inductively coupled plasma mass spectrometer through a spray chamber is proposed. Analytical curves were constructed after the injection of 20 to 750 µL aliquots of a multielement standard solution (20.0 µg L-1 in Li, Be, Al, V, Cr, Mn, Ni, Co, Cu, Zn, As, Se, Sr, Ag, Cd, Ba, Tl, Pb) and the acquisition of the integrated transient signals. The linear concentration range could be extended to ca. five decades. The performance of the system was checked by analyzing a NIST 1643d reference material. Accuracy could be improved by the proper selection of the injected volume. Besides good precision (r.s.d. < 2%), the results obtained with the proposed procedure were closer to the certified values of the reference material than those obtained by direct aspiration or by injecting 125 µL of several analytical solutions and samples.

Model-based objects recognition in industrial environments for autonomous vehicles control

Behavior-based navigation of autonomous vehicles requires the recognition of the navigable areas and the potential obstacles. In this paper we describe a model-based objects recognition system which is part of an image interpretation system intended to assist the navigation of autonomous vehicles that operate in industrial environments. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using a rule-based cooperative expert system

Developing a new service business model for an industrial supplier

Project business companies are moving towards solution offering in order to avoid discontinuity of project business and to gain other advantages. An option to implement solution business could be BOOT (Build-Own-Operate-Transfer) business model where a company is given the responsibilities to design, finance, build, own, operate and maintain for example production facilities of a client. The contract is made for 10-30 years, the client pays the solution during this period of time and after contract termination the facilities are transferred to the ownership of the client. The purpose of this study was to provide knowledge about BOOT business model for the company in question and its employees and to create a settlement of the advantages, disadvantages and risks of it. Furthermore, one of the main objectives was to create a description of the network needed to run a BOOT project. The objectives were met through a literature study and an explorative case study with appropriate interviews. Based on this study, the company should be able to evaluate the applicability of BOOT business model to their business environment better.

Developing the environmental marketing of an industrial company

The objective of this study was to examine how the customers of Larox Flowsys value environmental issues and how environmental issues affect their purchasing behaviour. A comparison between Larox peristaltic pumps and competing pump brands and types was also made in order to find out whether LPP pumps possess some more environmentally beneficial features that other pumps do not have. Finally, if the answers to the first two research questions show that a need for a new marketing message does exist, then the final stage is to select the most appropriate environmental arguments for Larox Flowsys. The empirical data in the study was collected from several different sources, but the main sources were the customer interviews and the outsourced market research. The data was analysed mainly by using content analysis, but theme formation and quantification were also utilized. The results showed that the customers do not consider environmental issues as a main purchasing criterion, but they may well be the criterion that differentiates the product from competing ones. The comparison proved that LPP pumps do possess some significant environmental benefits over competing pumps and therefore, the prerequisite for the use of environmental arguments exists. The final stage in the study was to select the proper environmental arguments for Larox Flowsys.

Factors of customer project profitability in an engineering industrial enterprise

The purpose of the study is to find factors affecting projects' profitability in project business. The issue is approached from customer profitability and project management point of view. The study has been made for a big Finnish company acting in a global market place. The research method is quantitative. Research hypotheses are based on the literature. The used database is originated from the company's ERP- (enterprise resource planning) and project financial follow-up —system. The findings of the study supported the hypotheses weakly. Obviously profitability fluctuated depending on a customer and a project manager. The reasons could not be justified with the variables used in the research.

Processo químico industrial de extração de óleo vegetal: um experimento de química geral

In this study we describe an experimental procedure based on a chemical industrial process of soya-bean oil extraction applied in general chemistry for undergraduate students. The experiment was planned according to the Science, Technology and Society (STS) approach to teach basic chemical concepts and provide grounding in the management of environmental care. The use of real life chemistry problems seems to salient the relevance of chemistry to our students and enhances their motivation to learn both the practical and theoretical components of the discipline.