1000 resultados para Petróleo e Gás Natural
Resumo:
The oil production in mature areas can be improved by advanced recovery techniques. In special, steam injection reduces the viscosity of heavy oils, thus improving its flow to surrounding wells. On the other hand, the usually high temperatures and pressures involved in the process may lead to cement cracking, negatively affecting both the mechanical stability and zonal isolation provided by the cement sheath of the well. The addition of plastic materials to the cement is an alternative to prevent this scenario. Composite slurries consisting of Portland cement and a natural biopolymer were studied. Samples containing different contents of biopolymer dispersed in a Portland cement matrix were prepared and evaluated by mechanical and rheological tests in order to assess their behavior according to API (American Petroleum Institute) guidelines. FEM was also applied to map the stress distribution encountered by the cement at bottom bole. The slurries were prepared according to a factorial experiment plan by varying three parameters, i.e., cement age, contents of biopolymer and water-to-cement ratio. The results revealed that the addition of the biopolymer reduced the volume of free water and the setting time of the slurry. In addition, tensile strength, compressive strength and toughness improved by 30% comparing hardened composites to plain Portland slurries. FEM results suggested that the stresses developed at bottomhole may be 10 to 100 times higher than the strength of the cement as evaluated in the lab by unconfined mechanical testing. An alternative approach is proposed to adapt the testing methodology used to evaluate the mechanical behavior of oilwell cement slurries by simulating the confined conditions encountered at bottornhole
Resumo:
This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)
Resumo:
The gas migration during the cementing of wells is one of the main problems of oil wells engineering. Its occurrence can cause severe problems since shortly to loss of control of the well after cementation. Recently, 20/04/2010 In an accident of major proportions in the Gulf of Mexico, among other factors, faulty cementing operation provided the gas migration, causing the accident, in which 11 people died and 17 were injured occurred. Besides the serious consequences that can be caused by gas migration, remediation of the problem, which is made by injecting cement in damaged areas, usually involves additional costs and is not always effective. Therefore, preventing gas migration to be preferred. Some methods are used to prevent the migration of the pressurized gas as the annular space, application of pressure pulses, reducing the height of the cement column compressible cement pastes of low permeability, pastes and to control free filtered water, and binders of thixotropic cement expandable and flexible. Thus, the cement pastes used to prevent gas migration must meet the maximum these methods. Thus, this study aimed to formulate a cement paste to prevent gas migration, using the expanded vermiculite, and evaluate the behavior of the folder trials necessary for use in oil wells. Free water content, rheological properties, compressive strength, loss of liquid phase sedimentation of solids, specific weight, thickening time and gas migration: The following tests were performed. The results show that meets the specifications paste formulated for use in oil wells and the use of expanded vermiculite contribute to the absorption of free water, thixotropy and low density. The absorption of free water is proven to result in zero percentage test free water content, thixotropy is observed with the high value of the initial gel strength (Gi) in testing rheological properties and low density is proven in test weight specific
Resumo:
Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue
Resumo:
The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype
Resumo:
Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding
Resumo:
Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.
Resumo:
Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction
Resumo:
A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity
Resumo:
La présente étude sur la modernisation économique qui s est opérée dans le Rio Grande do Norte, constitue un débat concernant les tentatives de faire aboutir un projet de développement industriel fondé sur l exploitation des matières premières locales telles que le sel, le calcaire, les eaux mères et le pétrole, entre les années 70 et 90 du XXe siècle. Elle cherche à montrer, à partir de l observation de l action planifiée de l État national et régional, soutenu par le capital international et par les groupes économiques et politiques locaux, comment on a tenté d implanter, dans des conjonctures économiques distinctes, une industrie d intrants de base moyennant la création de deux pôles de développement : le Pólo Químico Industrial (1974) et le Pólo Gás Sal (1996). Elle est centrée sur l analyse des actions orientées vers la concrétisation de ces pôles, et prendra pour objet les politiques de développement émanant de l État national, en particulier celles qui relevaient du II PND et qui visaient, au cours des années 70, à l implantation d une industrie décentralisée dans la région Nordeste ; les règles fixées par le Plano Nacional de Desestatizações, destinées à promouvoir les privatisations des entreprises publiques brésiliennes, lesquelles ont rendu possible la vente d Alcanorte au groupe industriel commandé par Fragoso Pires, et les politiques définies par l État national et régional, rassemblées sous le titre de « guerre fiscale » afin d attirer des capitaux internationaux susceptibles de rendre viable le Pólo Gás Sal. Il y est démontré que l État a coordonné un ensemble d actions dans les domaines de l infrastructure et des exonérations fiscales et financières, dans le but d accélérer la transition d une économie primaire et exportatrice vers une économie moderne, industrialisée. Et que le concours simultané de forces économiques et sociales particulièrement expressives le capital national et international, les élites locales n a pas suffi pour promouvoir la modernisation industrielle escomptée des secteurs chimique et pétrochimique. Parmi les différentes raisons qui ont contribué à un tel échec, on peut mentionner : l absence d une accumulation interne préalable de capital ; la dépendance de l économie locale par rapport à la technologie et au capital des groupes économiques internationaux ; l inconsistance des stratégies de développement relevant de la politique qui caractérisait la « guerre fiscale », et la fragilité de la représentation politique locale
Resumo:
The oil activities in Brazil had been started in an intensive way in the end of the 30 s and in the beginning of the 40 s. Many of the brazilians fields discovered in the past are nowadays in decline. They are called ―mature fields‖. These fields, because of the decline situation that characterizes them, are not interesting for the majors. The majors want the big fields and big productions. On the other hand, they could be interesting for the small and medium enterprises. The mature oil fields are instruments of development, they have oil and the oil production is an activity connected with many social and economics benefits: jobs, taxes, royalties, etc. The Brazilian State, in this context, needs to realize actions to promote the activities in the mature oil fields, especially with the work of the small and mediums enterprises. Many of the onshore brazilian mature fields are located at the Northeast, a region matched by many social and economic problems. The activities in the mature fields of the Northeast Region could solve some of its problems. The present research analyses the mature oil fields and its situations in Brazil, making criticisms and suggestions. The methodology adopted is theoretical and descriptive, with literature review, case law and legislation (Constituição Federal de 1988, ―Law of the Oil‖). This research examines the following points: mature fields rounds and its documents, name and definition of the mature fields, definition of small and medium enterprises, environmental aspects, concentration of certain activities of the sector and the royalties
Resumo:
Under the circumstances of the desestatization that penetrate Brazilian economy in the 90‟s, new features in the monopoly of oil by the Union were designed by the constitutional amendment number 9. of 1995. This deep change in the legal regime of oil sector brought the possibility of entrance to small and medium size producers in this industry, especially through the production activities developed in mature and marginal fields of oil, which are located mainly in northeast region of Brazil. Considering that the intervention of state over the economy finds its guidelines and limits in Federal Constitution disposals, the present work investigated in which way states regulation, mainly through taxation rules, has obeyed the constitutional regime in force, and specially, the reduction of regional inequalities principle. By mean, firstly, of an analysis of central concepts (mature fields, marginal fields, small and medium size producers) we observed that the imprecision over the conceptual aspect has constituted an obstacle to a specific states‟ regulation, directed to this newborn class of producers, whose growth has been pursuit by the state. That is verified in the case of concession procedures, and also, concerning the taxation system applied to small and medium size producers. Examining the main constitutional principles related to this universe which are the legality, equality, privileged treatment to small enterprises, contributive capacity, and reduction of regional inequalities we conclude that it is legally possible, a truly specific regulation, including a special taxation regime, to the small and medium size producers whose activities are concentrate over mature-marginal fields, aiming the concretization of the Brazilian state main goals
Resumo:
The demands brought by a society doomed to the constant production of global risks, which whose effects are not immediately noticed effects are not perceived immediately, claim from the Law a new Theory about the Risk, that would offer a broad environmental protection, at the same time it would still be compatible with the idea of economic efficiency, required by the Modern Industry. The expansion of the methods and technologies regarding the exploitation and production of oil causes the constant expansion of the exploitable boundaries, especially in ultra-deep waters with the Pre-salt layer, in Brazil, or the still incipient research about the polymetallic nodules and other mineral sources in international waters, like the Atlântico Sudoeste, by the Programme on Ocean Science in Relation do Non Living Resources (OSNLR), a global study performed in partnership with the Intergovernmental Oceanographic Commission, from UNESCO (IOC UNESCO) and also with the Division of Ocean Affairs and Law of the Sea (UNDOALOS). Thus, we aim to analyze the correlation, and possible collisions between the right to a balanced environment and the free exercise of economic activity and the occurrence of environmental damages from the perspective of the exploitation activities of oil and other natural resources in international waters, specifically in the Area, from the constitutional principle of sustainable development and its legitimacy by the environmental international protection. Therefore, this study also aims to evaluate the legal framework for exploration and production of oil in international waters, particularly in the Area, and appraise how the constitutional instruments and mechanisms for environmental protection can impact on the international environmental protection system in order to ensure the present and future generations an ecologically balanced environment, laid down in Article 225 of the Brazilian Constitution, even with so many risks posed by the activities of exploitation and production of oil in international waters. In the meantime, we intend to also intend to investigate the possibility of future liability for environmental damage in order to ensure that constitutional principle and, consequently, and try to define the concept of environmental damage and its implications on the constitutional principle of environmental protection. Given all that was in summary, this work aims to contribute to the evolution of the new Theory of Environmental Risk, turning the law into something more than a punitive or corrective element in this society, but into a legal risk management, that may be triggered even before the consolidation of the damage
Resumo:
This master´s thesis presents a reliability study conducted among onshore oil fields in the Potiguar Basin (RN/CE) of Petrobras company, Brazil. The main study objective was to build a regression model to predict the risk of failures that impede production wells to function properly using the information of explanatory variables related to wells such as the elevation method, the amount of water produced in the well (BSW), the ratio gas-oil (RGO), the depth of the production bomb, the operational unit of the oil field, among others. The study was based on a retrospective sample of 603 oil columns from all that were functioning between 2000 and 2006. Statistical hypothesis tests under a Weibull regression model fitted to the failure data allowed the selection of some significant predictors in the set considered to explain the first failure time in the wells
Resumo:
The search for a sustainable development is result of the exhaustion of the natural resources of the planet that demands globalizated politics with practical of compatible economic development with the protection of the quality of life for the future generations. This work presents a study on the thematic on the environmental liabilities in the organizations with focus in the industry of the oil and the production of oil in land in the state of Rio Grande do Norte. Some types of environmental liabilities are presented, as well as, some estimates techniques. Moreover, this work presents surveys of some variable that stimulate the organizations to implant technologies of reduction of the impacts in the environment as: the environmental legislation, costs, the main impacts of the production of oil in land. On the basis of the bibliographical research and in the identified variable, it was carried a case study with state and municipal technician that act in the sectors of fiscalization (IBAMA-RN and IDEMA-RN) with the objective to deepen the discussion regarding the impacts of the industry of the oil, the effectiveness of the current law, the performance of the institutions the federal level and how to prevent impacts in the environment. It was observed that the environmental liabilities are a little spread subject in the organizations, perhaps to be unknown and of few theoretical referencees at the national level, regarding to the evaluation techniques. At the same time, absentee in the national politics that conducts the oil exploration