The Relationship between Authors and Main Thematic Categories in the Field of Knowledge Organization: A Bibliometric Approach

This is a study about the relationships between authors and the main thematic categories in the papers published in the last five International ISKO Conferences, held between 2002 and 2010. The aim is to map the domain as ISKO conferences are considered the most representative forum in the field. The published papers are considered to indicate the relationships between authors and themes. The Classification Scheme for Knowledge Organization Error! Bookmark not defined Literature (CSKOL) was used to categorize the papers. The theoretical and methodological foundations of the study can be found in the concept of domain analysis proposed by Hjorland. The analysis of the papers (n=146) led to the identification of the most productive authors, the networks representing the relationships between the authors as also the categories that constitute the primary areas of research.

Violence against children and adolescents: the importance of knowledge of the spectrum of bruise colors in its diagnosis

Introduction: One of the violence types more observed against children is the physical abuse, which produces many types of traumatic injuries. Contusions are common trauma signs and may indicate aggression when frequently present in locations where accidental injuries are rare. Contusions in skin undergo color changes with the passage of time, and such change in color is called “spectrum of bruise colors of Legrand du Saulle”. Thus, it is possible to estimate the age of the lesion based on the evaluation of color. Injuries caused by child abuse often reach regions of head, face and neck, because they are exposed and easily accessible. Therefore, the dentist is responsible with regard to the diagnosis and the actions to be undertaken against the cases of child abuse. Objective: To present and discuss the significance of the spectrum of bruise colors as a considerable visible trace in suspicion of violence against children and adolescents, during dentists’ clinical routine. Literature review: The study of the “spectrum of bruise colors of Legrand du Saulle” refers to the estimation of the age of the injury, in respect to the color change. The application of this study is of great value for identify if a lesion occurred from a single incident or from multiple incidents, especially in cases where it occurs in the same region of the body, indicative of repetitive trauma. Conclusion: The spectrum of bruise colors is very important for health professionals, such as dentists, for the identification or suspicion of cases of abuse against children and adolescents. As great part of the lesions originated of abuse involve the areas of head and neck, it is unacceptable that these professionals are unaware of the basic signs to help in early diagnosis, which is the case of the colors of the lesions. However, concerning the chronology of the spectrum of bruise colors, it is not possible to establish rigorous times.

Monitoring the process of densification of 3D and 4D (tridirectional and tetradirectional) carbon/carbon composites

Carbon fiber reinforced carbon composites can be made by iterative liquid impregnation or gas phase carbon deposition routes. In both cases, at the final processing stage the carbon fiber is embedded in carbon matrix which results in unique properties such as low density, high thermal conductivity and thermal shock resistance, low thermal expansion and high modulus, in relation to other refractory materials. In the present study assembled three-directional and four-directional preforms, having 50% volume of pores, were densified by iterative cycles of thermoset resin impregnation followed by pyrolysis under inert atmosphere, until appropriate densities were achieved. The thermoset resin is converted in a carbon matrix during pyrolysis. The iterative manufacturing process of the carbon fiber reinforced carbon composites is evaluated by means of nondestructive techniques based on X-ray computed tomography and electrical resistivity. X-ray computed tomography gives a general mapping view of the filling pores of the preforms which impacts results of the electrical resistivity. After six processing cycles and heat treatments up to 2000?, the final densities of the three-directional and four-directional carbon fiber reinforced carbon composites were 1.16g/cm(3) and an electrical resistivity of approximate to 0.07m. The configuration of preforms, three-directional or four-directional, did not alter the densification profile, in terms of increasing density and reducing porosity during the processing cycles.

Nicotine dependence and levels of depression and anxiety in smokers in the process of smoking cessation

Background: Depression and anxiety are psychiatric disorders that are related to tobacco use and associated with dependence, the process of cessation, lapses and relapses after quitting smoking. Objective: To analyze the association of nicotine dependence with the level of anxiety and depression in patients who are in the process of smoking cessation. Methods: Cross-sectional study conducted with patients who sought the smoking cessation program in Cuiabá/MT. All the smokers enrolled from May to August 2012, participated in this study. Four instruments were applied: Socio-demographic Questionnaire, Fagerstrom test, Beck Anxiety Inventory and Beck Depression Inventory. Following bivariate analysis, using the crude prevalence ratio, with level of significance lower than 5% (p < 0.05), having as variable outcome the nicotine dependence >= 5 (Fagerstrom). The associations with p < 0.20 were selected for robust Multiple Poisson Regression (RPa). Results: Associations of Fagerstrom >= 5 with the male sex (RP = 1.15 CI 95% 1.03-1.28); number of cigarettes/day (RP = 1,33; CI 95% 1.19-1.48); and moderate/severe level of depression (RP = 1.15; CI 95% 1.04-1.28) were found. In the final model (RPa), the following variables remained associated: male gender (RPa 1.12; CI 95% 1.01-1.24), number of cigarettes/day (RPa 1.28; CI 95% 1.15-1.43) and high level of depression (RPa 1.12; CI 95% 1.01-1.23). Discussion: High level of nicotine dependence was associated significantly with the level of depression, emphasizing the association between smoking and psychiatric comorbidities.

Healing process of dogs' pulpless teeth after apicoectomy and root canal filling at different levels

Dogs' teeth with infected root canals, were submitted to apicoectomy and the root canals were filled flush or 2 mm short. In a third group the canals were left unfilled and only the access openings were closed. One hundred and eighty days after the treatment, the animals were killed and the specimens prepared for histological analysis. Repair was not observed in the teeth with unfilled root canals. The healing observed in the teeth with root canals filled flush was less complete than the healing observed when the root canals were filled 2 mm short.

Influence of irrigation and intracanal dressing on the healing process of dogs' teeth with apical periodontitis.

Dogs' teeth with apical periodontitis were treated endodontically, Dakin's solution being used in an experimental group as the irrigation solution, and camphorated paramonochlorophenol as an intracanal dressing. For a second group of teeth, the irrigation solution used was physiologic saline, dry cotton only being placed into the pulpal chamber to take the place of an intracanal dressing. In a second visit, overinstrumentation and a new application of the same kind of dressing were performed, the root canals being then filled with gutta-percha cones and zinc oxide-eugenol cement. Other specimens were treated, in one visit, where physiologic saline or Dakin's solution were the irrigation solutions. The animals were sacrificed 6 months after the obturation of the root canals. Histologic exams showed better results for the experimental group where Dakin's solution and camphorated paramonochlorophenol had been used, with signs of repair characterized by newly formed cementum and bone tissue, as well as a marked reduction in size of the periapical lesions. No differences were seen in the results with physiologic saline or Dakin's solution as irrigants.

A pesquisa em psicologia: ensaio sobre a Psicologia enquanto ciência, a pesquisa qualitativa e o uso da entrevista como principal instrumento de coleta de dados

For constituting itself a science, Psychology has coursed along way. From the time he was considered a Philosophy’s discipline until to be recognized as a legitimate science, Psychology had to devoteto the definition of its object of study, the development and refinement of theoretical-methodological frameworks and, in particular, to consolidation process of their research strategies and knowledge construction. Therefore, in order to regard the demands of the classical scientific paradigm, which is very influenced by Positivism, Psychology made use, initially, of quantitative methodology and laboratory research. This article presents some of the process of identity construction of Psychology as a science, focusing on its transition path between the quantitativist paradigm of scientific knowledge production to the qualitativist paradigm, until that is more commonly practiced nowadays: the collaborative use of these methodological strategies. For presenting the qualitative researching Psychology, we discussed, beyond its proposal and differentiation elements in relation to quantitative research, the different methods used for this mode and, in particular, the interview - which is considered the main way of data collection in surveys conducted by psychologists and, therefore, it is an important element the process of knowledge building that science, in addition to being the most qualified space for dialogue between there searcher and the research subject.

Nebraska Wind Power: A Comparitive Study of Knowledge and Attitudes

Abstract The goal of this project is to assess the knowledge and attitudes of Nebraskans on the issue of wind power. The point of this research is to learn whether the presence of wind power has a positive effect on a person’s knowledge about and attitudes toward wind power and wind turbines. Using mail surveys, qualitative and quantitative data were collected from the towns of Pierce and Ainsworth Nebraska. The surveys aided in seeing patterns of knowledge about wind power and wind turbines and positive and negative attitudes and major concerns regarding wind power.

No more than Conjectures: Popper and the Ethics of Scientific Enterprise

Karl Popper dealt with both problems Yurevich (Integrative Psychological and Behavioral Science, 43(2), 2009, doi:10.1007/s12124-008-9082-7) deals: the crisis in Psychology and in the discourse about the nature of science. Although he failed to provide a complete response for both problems, his proposals can yet be fruitful to the reflection on these matters in the context of the present discussion. He offers some tentative answers to what could be considered a healthy epistemic activity, something Yurevich does not provide. More interestingly, some of the Popper proposals seem to fit, and in some extent correct, the quest for ""collaborative work"" proposed by Zittoun et al. (Integrative Psychological and Behavioral Science, 43(2), 2009, doi:10.1007/s12124-008-9082-7) as a way of transforming crisis in development.

Two extensions for the ALWABP: Parallel stations and collaborative approach

In this article, we introduce two new variants of the Assembly Line Worker Assignment and Balancing Problem (ALWABP) that allow parallelization of and collaboration between heterogeneous workers. These new approaches suppose an additional level of complexity in the Line Design and Assignment process, but also higher flexibility; which may be particularly useful in practical situations where the aim is to progressively integrate slow or limited workers in conventional assembly lines. We present linear models and heuristic procedures for these two new problems. Computational results show the efficiency of the proposed approaches and the efficacy of the studied layouts in different situations. (C) 2012 Elsevier B.V. All rights reserved.

Kinetic and thermodynamic investigation of Arthrospira (Spirulina) platensis fed-batch cultivation in a tubular photobioreactor using urea as nitrogen source

BACKGROUND: Fed-batch culture allows the cultivation of Arthrospira platensis using urea as nitrogen source. Tubular photobioreactors substantially increase cell growth, but the successful use of this cheap nitrogen source requires a knowledge of the kinetic and thermodynamic parameters of the process. This work aims at identifying the effect of two independent variables, temperature (T) and urea daily molar flow-rate (U), on cell growth, biomass composition and thermodynamic parameters involved in this photosynthetic cultivation. RESULTS: The optimal values obtained were T = 32 degrees C and U = 1.16 mmol L-1 d-1, under which the maximum cell concentration was 4186 +/- 39 mg L-1, cell productivity 541 +/- 5 mg L-1 d-1 and yield of biomass on nitrogen 14.3 +/- 0.1 mg mg-1. Applying an Arrhenius-type approach, the thermodynamic parameters of growth (?H* = 98.2 kJ mol-1; ?S* = - 0.020 kJ mol-1 K-1; ?G* = 104.1 kJ mol-1) and its thermal inactivation (Delta H-D(0) =168.9 kJ mol-1; Delta S-D(0) = 0.459 kJ mol-1 K-1; Delta G(D)(0) =31.98 kJ mol-1) were estimated. CONCLUSIONS: To maximize cell growth T and U were simultaneously optimized. Biomass lipid content was not influenced by the experimental conditions, while protein content was dependent on both independent variables. Using urea as nitrogen source prevented the inhibitory effect already observed with ammonium salts. Copyright (c) 2012 Society of Chemical Industry

Quality characteristics and fertilizing ability of ram sperm subpopulations separated by partition in an aqueous two-phase system

Centrifugal countercurrent distribution (CCCD) in an aqueous two-phase system (TPS) is a resolute technique revealing sperm heterogeneity and for the estimation of the fertilizing potential of a given semen sample. However, separated sperm subpopulations have never been tested for their fertilizing ability yet. Here, we have compared sperm quality parameters and the fertilizing ability of sperm subpopulations separated by the CCCD process from ram semen samples maintained at 20 degrees C or cooled down to 5 degrees C. Total and progressive sperm motility was evaluated by computer-assisted analysis using a CASA system and membrane integrity was evaluated by flow cytometry by staining with CFDA/Pl. The capacitation state, staining with chlortetracycline, and apoptosis-related markers, such as phosphatidylserine (PS) translocation detected with Annexin V. and DNA damage detected by the TUNEL assay, were determined by fluorescence microscopy. Additionally, the fertilizing ability of the fractionated subpopulations was comparative assessed by zona binding assay (ZBA). CCCD analysis revealed that the number of spermatozoa displaying membrane and DNA alterations was higher in samples chilled at 5 degrees C than at 20 degrees C. which can be reflected in the displacement to the left of the CCCD profiles. The spermatozoa located in the central and right chambers (more hydrophobic) presented higher values (P<0.01) of membrane integrity, lower PS translocation (P<0.05) and DNA damage (P<0.001) than those in the left part of the profile, where apoptotic markers were significantly increased and the proportion of viable non-capacitated sperm was reduced. We have developed a new protocol to recover spermatozoa from the CCCD fractions and we proved that these differences were related with the fertilizing ability determined by ZBA, because we found that the number of spermatozoa attached per oocyte was significantly higher for spermatozoa recovered from the central and right chambers, in both types of samples. This is the first time, to our knowledge that sperm recovered from a two-phase partition procedure are used for fertilization assays. These results open up new possibilities for using specific subpopulations of sperm for artificial insemination or in vitro fertilization, not only regarding better sperm quality but also certain characteristics such as subpopulations enriched in spermatozoa bearing X or Y chromosome that we have already isolated or any other feature. (C) 2011 Elsevier B.V. All rights reserved.

Formation of oxysulfide LnO(2)S(2) and oxysulfate LnO(2)SO(4) phases in the thermal decomposition process of lanthanide sulfonates (Ln = La, Sm)

This study investigates two lanthanide compounds (La(3+) and Sm(3+)) obtained in water/ethyl alcohol solutions employing the anionic surfactant diphenyl-4-amine sulfonate (DAS) as ligand. Both sulfonates were characterized through IR, TG/DTG (O(2) and N(2)). The thermal treatment of both compounds at 1273 K under air leaves residues containing variable percentages of lanthanide oxysulfide/oxysulfate phases shown by synchrotron high-resolution XRD pattern including the Rietveld analysis. The phase distributions found in the residues evidence the differences in the relative stability of the precursors.

Structural refinement, growth process, photoluminescence and photocatalytic properties of (Ba1-xPr2x/3)WO4 crystals synthesized by the coprecipitation method

Barium praseodymium tungstate (Ba1-xPr2x/3)WO4 crystals with (x = 0, 0.01, and 0.02) were prepared by the coprecipitation method. These crystals were structurally characterized by X-ray diffraction (XRD), Rietveld refinements, Fourier-transform Raman (FT-Raman) and Fourier-transform infrared (FT-IR) spectroscopies. The shape and size of these crystals were observed by field emission scanning electron microcopy (FE-SEM). Their optical properties were investigated by ultraviolet visible (UV-vis) absorption and photoluminescence (PL) measurements. Moreover, we have studied the photocatalytic (PC) activity of crystals for degradation of rhodamine B (RhB) dye. XRD patterns, Rietveld refinements data, FT-Raman and FT-IR spectroscopies indicate that all crystals exhibit a tetragonal structure without deleterious phases. FT-Raman spectra exhibited 13 Raman-active modes in a range from 50 to 1000 cm(-1), while FT-IR spectra have 8 infrared active modes in a range from 200 to 1050 cm(-1). FE-SEM images showed different shapes (bonbon-, spindle-, rice-and flake-like) as well as a reduction in the crystal size with an increase in Pr3+ ions. A possible growth process was proposed for these crystals. UV-vis absorption measurements revealed a decrease in optical band gap values with an increase of Pr3+ into the matrix. An intense green PL emission was noted for (Ba1-xPr2x/3)WO4 crystals (x = 0), while crystals with (x = 0.01 and 0.02) produced a reduction in the wide band PL emission and the narrow band PL emission which is related to f-f transitions from Pr3+ ions. High photocatalytic efficiency was verified for the bonbon-like BaWO4 crystals as a catalyst in the degradation of the RhB dye after 25 min under UV-light. Finally, we discuss possible mechanisms for PL and PC properties of these crystals.

Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility

Abstract Background In recent years, biorefining of lignocellulosic biomass to produce multi-products such as ethanol and other biomaterials has become a dynamic research area. Pretreatment technologies that fractionate sugarcane bagasse are essential for the successful use of this feedstock in ethanol production. In this paper, we investigate modifications in the morphology and chemical composition of sugarcane bagasse submitted to a two-step treatment, using diluted acid followed by a delignification process with increasing sodium hydroxide concentrations. Detailed chemical and morphological characterization of the samples after each pretreatment condition, studied by high performance liquid chromatography, solid-state nuclear magnetic resonance, diffuse reflectance Fourier transformed infrared spectroscopy and scanning electron microscopy, is reported, together with sample crystallinity and enzymatic digestibility. Results Chemical composition analysis performed on samples obtained after different pretreatment conditions showed that up to 96% and 85% of hemicellulose and lignin fractions, respectively, were removed by this two-step method when sodium hydroxide concentrations of 1% (m/v) or higher were used. The efficient lignin removal resulted in an enhanced hydrolysis yield reaching values around 100%. Considering the cellulose loss due to the pretreatment (maximum of 30%, depending on the process), the total cellulose conversion increases significantly from 22.0% (value for the untreated bagasse) to 72.4%. The delignification process, with consequent increase in the cellulose to lignin ratio, is also clearly observed by nuclear magnetic resonance and diffuse reflectance Fourier transformed infrared spectroscopy experiments. We also demonstrated that the morphological changes contributing to this remarkable improvement occur as a consequence of lignin removal from the sample. Bagasse unstructuring is favored by the loss of cohesion between neighboring cell walls, as well as by changes in the inner cell wall structure, such as damaging, hole formation and loss of mechanical resistance, facilitating liquid and enzyme access to crystalline cellulose. Conclusions The results presented herewith show the efficiency of the proposed method for improving the enzymatic digestibility of sugarcane bagasse and provide understanding of the pretreatment action mechanism. Combining the different techniques applied in this work warranted thorough information about the undergoing morphological and chemical changes and was an efficient approach to understand the morphological effects resulting from sample delignification and its influence on the enhanced hydrolysis results.