Rearing strategies of young dairy calves in relation to production, behaviour and welfare

Vasikoiden kasvatus yksilökarsinoissa, imemismahdollisuuden puute maitojuoton yhteydessä sekä pienet juomamäärät ovat tekijöitä, jotka mahdollisesti voivat vähentää vasikoiden hyvinvointia. Vasikoiden kasvatukseen etsitäänkin uusia tapoja, joissa eläinten käyttäytymistarpeet ja hyvinvointi otetaan entistä paremmin huomioon. Tässä väitöskirjassa vasikoiden kasvatusta on tarkasteltu sekä tuotannon että vasikoiden käyttäytymisen ja hyvinvoinnin kannalta. Väitöskirja koostuu kolmesta kokeesta, joista ensimmäisessä tutkittiin vasikoiden kasvatusta ryhmäkarsinoissa ulkona tai sisällä ja vasikoiden kasvatusta sisällä ryhmä- tai yksilökarsinoissa. Toisessa kokeessa vasikoiden annettiin imeä emiään rajoitetusti lypsyn jälkeen viiden tai kahdeksan viikon ajan ja kolmannessa selvitettiin vasikoiden veden juontia, kun vasikat saivat juomarehua vapaasti. Lisäksi kokeiden yhdistetystä aineistosta analysoitiin eri rehujen syöntimäärien suhdetta sekä rehujen vaikutusta kasvuun ennen ja jälkeen maidosta vieroituksen. Tutkimuksessa todettiin, että vasikoita voi ryhmässä kasvattaa kylmissä ja vaihtelevissa sääoloissa ulkona, kunhan ne hoidetaan ja ruokitaan erittäin huolellisesti. Kylmällä ilmalla vasikat saattavat kuitenkin syödä väkirehua vähemmän varsinkin, jos ruokailupaikka on ulkona ja makuualue sisällä. Ryhmässä kasvaneet vasikat aloittivat sekä kuivien rehujen syönnin että märehtimisen nuorempina kuin yksilökarsinassa kasvaneet. Ryhmissä esiintyvää käyttäytymisongelmaa, toisten vasikoiden imemistä, voidaan vähentää hoito- ja ruokintamenetelmillä. Annettaessa vasikoiden imeä emiään rajoitetusti lypsyn jälkeen vasikat oppivat imemään emiään hyvin nopeasti. Lypsytyö vaikeutui muutamien lehmien kohdalla, sillä ne pidättivät maitoa lypsettäessä. Saadessaan imeä rajoitetusti vasikat imivät suurehkoja maitomääriä kerrallaan. Vieroittaminen suurilta maitomääriltä viiden viikon iässä oli kuitenkin liian aikaista, koska vasikat eivät vielä syöneet riittävästi kuivia rehuja. Vieroitus emästä niin viiden kuin kahdeksankin viikon iässä aiheutti vasikoissa levottomuutta ja ääntelyn lisääntymistä. Saadessaan hapatettua juomarehua vapaasti vasikat joivat keskimäärin vain vähän vettä, olipa vesilähteenä avoin ämpäri tai vesinippa. Vasikoiden välillä oli suurta vaihtelua veden juontimäärissä. Viikkoa ennen maidosta vieroitusta vasikat joivat 0-3 l vettä päivässä. Vasikat joivat nipasta kerrallaan vähemmän vettä kuin ämpäristä, ja käyttivät enemmän aikaa päivässä veden juomiseen kuin vesiämpäristä juoneet vasikat. Suurin osa vasikoista joi vettä juomanipoista erikoisella tavalla esimerkiksi painamalla nippaa otsalla ja juomalla tippuvaa vettä. Vesinipat voivat olla siis vasikoille joko vaikeita tai epämukavia käyttää. Vasikoiden juoman maitomäärän lisääntyessä kasvu lisääntyy selvästi. Runsas maidon juominen vähentää kuitenkin kuivien rehujen syöntiä ja vieroitusvaiheessa kasvu voi hidastua. Vasikat olisikin tärkeää vieroittaa vähitellen, ettei muutoksia kasvuun tulisi. Syönti- ja kasvutulokset eivät aina anna oikeaa kuvaa kasvatusmenetelmien eroista eläinten hyvinvoinnin kannalta. Käyttäytyminen on herkkä hyvinvoinnin mittari ja se tulisikin aina huomioida eri kasvatusmenetelmiä arvioitaessa. .

Microclimate and gas emissions in dairy buildings : Instrumentation, theory and measurements

The aim of this thesis was to develop measurement techniques and systems for measuring air quality and to provide information about air quality conditions and the amount of gaseous emissions from semi-insulated and uninsulated dairy buildings in Finland and Estonia. Specialization and intensification in livestock farming, such as in dairy production, is usually accompanied by an increase in concentrated environmental emissions. In addition to high moisture, the presence of dust and corrosive gases, and widely varying gas concentrations in dairy buildings, Finland and Estonia experience winter temperatures reaching below -40 ºC and summer temperatures above +30 ºC. The adaptation of new technologies for long-term air quality monitoring and measurement remains relatively uncommon in dairy buildings because the construction and maintenance of accurate monitoring systems for long-term use are too expensive for the average dairy farmer to afford. Though the documentation of accurate air quality measurement systems intended mainly for research purposes have been made in the past, standardised methods and the documentation of affordable systems and simple methods for performing air quality and emissions measurements in dairy buildings are unavailable. In this study, we built three measurement systems: 1) a Stationary system with integrated affordable sensors for on-site measurements, 2) a Wireless system with affordable sensors for off-site measurements, and 3) a Mobile system consisting of expensive and accurate sensors for measuring air quality. In addition to assessing existing methods, we developed simplified methods for measuring ventilation and emission rates in dairy buildings. The three measurement systems were successfully used to measure air quality in uninsulated, semi-insulated, and fully-insulated dairy buildings between the years 2005 and 2007. When carefully calibrated, the affordable sensors in the systems gave reasonably accurate readings. The spatial air quality survey showed high variation in microclimate conditions in the dairy buildings measured. The average indoor air concentration for carbon dioxide was 950 ppm, for ammonia 5 ppm, for methane 48 ppm, for relative humidity 70%, and for inside air velocity 0.2 m/s. The average winter and summer indoor temperatures during the measurement period were -7º C and +24 ºC for the uninsulated, +3 ºC and +20 ºC for the semi-insulated and +10 ºC and +25 ºC for the fully-insulated dairy buildings. The measurement results showed that the uninsulated dairy buildings had lower indoor gas concentrations and emissions compared to fully insulated buildings. Although occasionally exceeded, the ventilation rates and average indoor air quality in the dairy buildings were largely within recommended limits. We assessed the traditional heat balance, moisture balance, carbon dioxide balance and direct airflow methods for estimating ventilation rates. The direct velocity measurement for the estimation of ventilation rate proved to be impractical for naturally ventilated buildings. Two methods were developed for estimating ventilation rates. The first method is applicable in buildings in which the ventilation can be stopped or completely closed. The second method is useful in naturally ventilated buildings with large openings and high ventilation rates where spatial gas concentrations are heterogeneously distributed. The two traditional methods (carbon dioxide and methane balances), and two newly developed methods (theoretical modelling using Fick s law and boundary layer theory, and the recirculation flux-chamber technique) were used to estimate ammonia emissions from the dairy buildings. Using the traditional carbon dioxide balance method, ammonia emissions per cow from the dairy buildings ranged from 7 g day-1 to 35 g day-1, and methane emissions per cow ranged from 96 g day-1 to 348 g day-1. The developed methods proved to be as equally accurate as the traditional methods. Variation between the mean emissions estimated with the traditional and the developed methods was less than 20%. The developed modelling procedure provided sound framework for examining the impact of production systems on ammonia emissions in dairy buildings.

Quantitative trait loci detection and benefits from marker-assisted selection in dairy cattle

Knowing the chromosomal areas or actual genes affecting the traits under selection would add more information to be used in the selection decisions which would potentially lead to higher genetic response. The first objective of this study was to map quantitative trait loci (QTL) affecting economically important traits in the Finnish Ayrshire population. The second objective was to investigate the effects of using QTL information in marker-assisted selection (MAS) on the genetic response and the linkage disequilibrium between the different parts of the genome. Whole genome scans were carried out on a grand-daughter design with 12 half-sib families and a total of 493 sons. Twelve different traits were studied: milk yield, protein yield, protein content, fat yield, fat content, somatic cell score (SCS), mastitis treatments, other veterinary treatments, days open, fertility treatments, non-return rate, and calf mortality. The average spacing of the typed markers was 20 cM with 2 to 14 markers per chromosome. Associations between markers and traits were analyzed with multiple marker regression. Significance was determined by permutation and genome-wise P-values obtained by Bonferroni correction. The benefits from MAS were investigated by simulation: a conventional progeny testing scheme was compared to a scheme where QTL information was used within families to select among full-sibs in the male path. Two QTL on different chromosomes were modelled. The effects of different starting frequencies of the favourable alleles and different size of the QTL effects were evaluated. A large number of QTL, 48 in total, were detected at 5% or higher chromosome-wise significance. QTL for milk production were found on 8 chromosomes, for SCS on 6, for mastitis treatments on 1, for other veterinary treatments on 5, for days open on 7, for fertility treatments on 7, for calf mortality on 6, and for non-return rate on 2 chromosomes. In the simulation study the total genetic response was faster with MAS than with conventional selection and the advantage of MAS persisted over the studied generations. The rate of response and the difference between the selection schemes reflected clearly the changes in allele frequencies of the favourable QTL. The disequilibrium between the polygenes and QTL was always negative and it was larger with larger QTL size. The disequilibrium between the two QTL was larger with QTL of large effect and it was somewhat larger with MAS for scenarios with starting frequencies below 0.5 for QTL of moderate size and below 0.3 for large QTL. In conclusion, several QTL affecting economically important traits of dairy cattle were detected. Further studies are needed to verify these QTL, check their presence in the present breeding population, look for pleiotropy and fine map the most interesting QTL regions. The results of the simulation studies show that using MAS together with embryo transfer to pre-select young bulls within families is a useful approach to increase the genetic merit of the AI-bulls compared to conventional selection.

Tracking and identifying wastewater toxicants and assessing their biodegradation products

Screening of wastewater effluents from municipal and industrial wastewater treatment plants with biotests showed that the treated wastewater effluents possess only minor acute toxic properties towards whole organisms (e.g. bacteria, algae, daphnia), if any. In vitro tests (sub-mitochondrial membranes and fish hepatocytes) were generally more susceptible to the effluents. Most of the effluents indicated the presence of hormonally active compounds, as the production of vitellogenin, an egg yolk precursor protein, was induced in fish hepatocytes exposed to wastewater. In addition, indications of slight genotoxic potential was found in one effluent concentrate with a recombinant bacteria test. Reverse electron transport (RET) of mitochondrial membranes was used as a model test to conduct effluent assessment followed by toxicant characterisations and identifications. Using a modified U.S. EPA Toxicity Identification Evaluation Phase I scheme and additional case-specific methods, the main compound in a pulp and paper mill effluent causing RET inhibition was characterised to be an organic, relatively hydrophilic high molecular weight (HMW) compound. The toxicant could be verified as HMW lignin by structural analyses using nuclear magnetic resonance. In the confirmation step commercial and in-house extracted lignin products were used. The possible toxicity related structures were characterised by statistical analysis of the chemical breakdown structures of laboratory-scale pulping and bleaching effluents and the toxicities of these effluents. Finally, the biological degradation of the identified toxicant and other wastewater constituents was evaluated using bioassays in combination with chemical analyses. Biological methods have not been used routinely in establishing effluent discharge limits in Finland. However, the biological effects observed in this study could not have been predicted using only routine physical and chemical effluent monitoring parameters. Therefore chemical parameters cannot be considered to be sufficient in controlling effluent discharges especially in case of unknown, possibly bioaccumulative, compounds that may be present in small concentrations and may cause chronic effects.

Novel Oxidation of Pyridoxal in Ternary Metal Complexes. An X-Ray Study of the Products

Attempts to prepare ternary metal complexes of pyridoxylidene-amino acid Schiff bases culminated in the oxidation of pyridoxal to pyridoxic acid or to its lactone and their complex formation, as evidenced from an X-ray study.

HPLC analysis of plant sterol oxidation products

Increased interest in the cholesterol-lowering effect of plant sterols has led to development of plant sterol-enriched foods. When products are enriched, the safety of the added components must be evaluated. In the case of plant sterols, oxidation is the reaction of main concern. In vitro studies have indicated that cholesterol oxides may have harmful effects. Due their structural similarity, plant sterol oxidation products may have similar health implications. This study concentrated on developing high-performance liquid chromatography (HPLC) methods that enable the investigation of formation of both primary and secondary oxidation products and thus can be used for oxidation mechanism studies of plant sterols. The applicability of the methods for following the oxidation reactions of plant sterols was evaluated by using oxidized stigmasterol and sterol mixture as model samples. An HPLC method with ultraviolet and fluorescence detection (HPLC-UV-FL) was developed. It allowed the specific detection of hydroperoxides with FL detection after post-column reagent addition. The formation of primary and secondary oxidation products and amount of unoxidized sterol could be followed by using UV detection. With the HPLC-UV-FL method, separation between oxides was essential and oxides of only one plant sterol could be quantified in one run. Quantification with UV can lead to inaccuracy of the results since the number of double bonds had effect on the UV absorbance. In the case of liquid chromatography-mass spectrometry (LC-MS), separation of oxides with different functionalities was important because some oxides of the same sterol have similar molecular weight and moreover epimers have similar fragmentation behaviour. On the other hand, coelution of different plant sterol oxides with the same functional group was acceptable since they differ in molecular weights. Results revealed that all studied plant sterols and cholesterol seem to have similar fragmentation behaviour, with only relative ion abundances being slightly different. The major advantage of MS detection coupled with LC separation is the capability to analyse totally or partly coeluting analytes if these have different molecular weights. The HPLC-UV-FL and LC-MS methods were demonstrated to be suitable for studying the photo-oxidation and thermo-oxidation reactions of plant sterols. The HPLC-UV-FL method was able to show different formation rates of hydroperoxides during photo-oxidation. The method also confirmed that plant sterols have similar photo-oxidation behaviour to cholesterol. When thermo-oxidation of plant sterols was investigated by HPLC-UV-FL and LC-MS, the results revealed that the formation and decomposition of individual hydroperoxides and secondary oxidation products could be studied. The methods used revealed that all of the plant sterols had similar thermo-oxidation behaviour when compared with each other, and the predominant reactions and oxidation rates were temperature dependent. Overall, these findings showed that with these LC methods the oxidation mechanisms of plant sterols can be examined in detail, including the formation and degradation of individual hydroperoxides and secondary oxidation products, with less sample pretreatment and without derivatization.

Unusual products of oxidation with Cr(VI) of methyl 5-methyl-7-methoxy-8-isopropyl-3,4-2-naphthoate

Abstract is not available.

Structural Veneer Based Composite Products from Hardwood Thinning - Part II: Testing of Hollow Utility Poles

Australian utility pole network is aging and reaching its end of life, with 70% of the 5 million poles currently in-service nationally installed within the 20 years following the end of World War II. The estimated investment required for the replacement or remedial maintenance of the aging 3.5 millions poles is as high as 1.75 billion dollars. Additionally, an estimated 21,700 high-durability new poles are required each year, representing further investment of 13.5 million dollars per year. Yet, agreements which progressively phase out logging of native forests around Australia have been signed, giving the industry about 25 years to make the transition from Crown native forests to plantations and private forests. As utility poles were traditionally cut from native forest hardwood species, finding solutions to source new poles currently presents a challenge. This paper presents tests on Veneer Based Composite hardwood hollow utility poles manufactured from Gympie messmate (Eucalyptus cloeziana) plantation thinning. Small diameter poles of nominal 115 mm internal diameter and 15 mm wall-thickness were manufactured in two half-poles butt jointed together, using 9 veneers per halfpole. The poles were tested in bending and shear, and experimental test results are presented. The mechanical performance of the hollow poles is discussed and compared to hardwood poles cut from mature trees and of similar size. Future research and different options for improving the current concept are proposed in order to provide a more reliable and cost effective technical solution to the current shortage of utility poles. © RILEM 2014.

Biology and Management of Psocids Infesting Stored Products

Previously regarded as minor nuisance pests, psocids belonging to the genus Liposcelis now pose a major problem for the effective protection of stored products worldwide. Here we examine the apparent biological and operational reasons behind this phenomenon and why conventional pest management seems to be failing. We investigate what is known about the biology, behavior, and population dynamics of major pest species to ascertain their strengths, and perhaps find weaknesses, as a basis for a rational pest management strategy. We outline the contribution of molecular techniques to clarifying species identification and understanding genetic diversity. We discuss progress in sampling and trapping and our comprehension of spatial distribution of these pests as a foundation for developing management strategies. The effectiveness of various chemical treatments and the availability and potential of nonchemical control methods are critically examined. Finally, we identify research gaps and suggest future directions for research.

Structural Veneer Based Composite Products from Hardwood Thinning - Part I: Background and Manufacturing

In Australia, plantation forests have increased in area by around 50% in the last 10 years. While this expansion has seen a modest 8% increase for softwoods, hardwood plantations have dramatically increased by over 150%. Hardwood plantations grown for high quality sawn timber are slow to mature, with a crop rotation time potentially reaching 35 years. With this long lead-time, each year the risk from fire, pests and adverse weather events dramatically increases, while not translating into substantially higher financial returns to the grower. To justify continued expansion of Australia's current hardwood plantation estate, it is becoming necessary to develop higher value end-uses for both pulpwood and smaller 'sawlog' resources. The use of the low commercial value stems currently culled during thinning appears to be a necessary option to improve the industry profitability and win new markets. This paper provides background information on Australian forests and plantations and gives an overview of potential uses of Australian hardwood plantation thinning logs, as their mechanical properties. More specifically, this paper reports on the development of structural Veneer Based Composite (VBC) products from hardwood plantation thinning logs, taking advantage of a recent technology developed to optimise the processing of this resource. The process used to manufacture a range of hollow-form veneer laminated structural products is presented and the mechanical characteristics of these products are investigated in the companion paper. The market applications and future opportunities for the proposed products are also discussed, as potential benefits to the timber industry. © RILEM 2014.

Flaws in the current method for calculating methane emissions during dairy manure management in New Zealand

New Zealand's Greenhouse Gas Inventory (the NZ Inventory) currently estimates methane (CH4) emissions from anaerobic dairy effluent ponds by: (1) determining the total pond volume across New Zealand; (2) dividing this volume by depth to obtain the total pond surface area; and (3) multiplying this area by an observational average CH4 flux. Unfortunately, a mathematically erroneous determination of pond volume has led to an imbalanced equation and a geometry error was made when scaling-up the observational CH4 flux. Furthermore, even if these errors are corrected, the nationwide estimate still hinges on field data from a study that used a debatable method to measure pond CH4 emissions at a single site, as well as a potentially inaccurate estimation of the amount of organic waste anaerobically treated. The development of a new methodology is therefore critically needed.

Managing resistance to chemical treatments in stored products pests

This review focuses on key trends in resistance to chemical treatments in stored product pests, and advances in resistance management, with an emphasis on resistance to the fumigant phosphine. Findings: Phosphine resistance continues to be a major concern. In particular, phosphine resistance in Cryptolestes ferrugineus has emerged as a serious issue, with some populations exhibiting the strongest level detected so far for this fumigant. In response, a 'quick knock down test' has been established to deliver industry and scientists 'same day' advice on the resistance status of field samples; sulfuryl fluoride is being developed as a 'resistance breaker' and phosphine dosages are being revised to manage this problem. There has been major progress in identifying the genes responsible for phosphine resistance and the development of molecular resistance diagnostics for key pests. Several studies on Rhyzopertha dominica have demonstrated that molecular screening can be used to determine the frequency of resistance alleles in samples collected from farm storages. Despite on-going research in several pests, there is no definitive answer to the question of whether there is a fitness cost associated phosphine resistance, with some studies showing a clear cost and others none. Evidence continues to emerge of resistance to grain protectants, including the juvenile hormone analogue methoprene. The development and adoption of spinosad, as a next generation 'green' treatment, and the use of protectant combinations provides opportunities to counter the problem of protectant resistance.Directions for future research: A uniform set of protocols should be developed for phosphine resistance detection for all major species. It should combine 'quick tests' and molecular diagnostics to be adopted internationally. Research is required on the establishment of a decision making system that integrates newly developed grain protectants and fumigants, other alternative control methods, as well as an accurate and rapid resistance detection system for early warning of the emergence of new resistances.