993 resultados para Computer programme
Suomalaisen kehityspolitiikan uusia tuulia : tapauksena Southern Africa Innovation Support Programme
Resumo:
The use of water-sensitive papers is an important tool for assessing the quality of pesticide application on crops, but manual analysis is laborious and time-consuming. Thus, this study aimed to evaluate and compare the results obtained from four software programs for spray droplet analysis in different scanned images of water-sensitive papers. After spraying, papers with four droplet deposition patterns (varying droplet spectra and densities) were analyzed manually and by means of the following computer programs: CIR, e-Sprinkle, DepositScan and Conta-Gotas. The diameter of the volume and number medians and the number of droplets per target area were studied. There is a strong correlation between the values measured using the different programs and the manual analysis, but there is a great difference between the numerical values measured for the same paper. Thus, it is not advisable to compare results obtained from different programs.
Resumo:
Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014
Resumo:
The objective of this thesis was to evaluate whether a more extensive mammography screening programme (TurkuMSP) conducted by the city of Turku, had an effect on breast cancer (BC) incidence, survival, or mortality in years 1987 to 2009. Despite the fact that some studies have suggested a 20 percent reduction in BC mortality due to mammography screening, there are findings of harm to subjects, which are claimed to negate the benefits of screening. Thus, the aims of this study are most pertinent. A total of 176 908 screening examinations were performed in 36 000 women aged 40−74 during the years 1987−1997. In all, 685 primary BCs were found in the screened women, either screen-detected (n=531) or during screening intervals (n=154). Survival and BC recurrence rate of women with screen-detected BC was compared to 184 women with clinical BCs detected among individuals who did not take part in the screening. The invitation interval, which may influence the outcome, was studied in the age group 40 to 49 by inviting those born in even calendar years annually for mammography screening and those born in odd years, triennially. In addition, BC incidence and mortality in the total female population of Turku aged 40 to 84 years was compared with the respective figures of Helsinki and the rest of Finland, both during the pre-screening era (1976-1986) and the screening era (1987-2009). The study was designed to compare women by age groups, because women aged 50 to 59 were generally screened in all of Finland, whereas only in Turku women aged 40 to 49 and 60 to 74 were screened in addition. Data regarding cancer recurrence were derived from the Finnish Cancer Registry and data on deaths were collected from Statistics Finland. In survival analyses, screened women with invasive BC had a significantly higher survival rate than the women with clinical BC. The survival benefit started to appear already during the first follow-up years and was evident in all age groups. A marginal survival extension was also seen in screened women when BC had spread to ipsilateral axillary nodes already at diagnosis. Recurrence-free survival rate after BC treatment was significantly more favorable among the screened women compared with women with BC found clinically. The screening invitation interval did not significantly influence BC mortality in the subset of women aged 40 to 49 years. There were no consistent differences in the changes of BC incidence between Turku and the comparison areas during the screening era. In Turku, the BC mortality incidence in women aged 55−69 years was significantly lower during the screening era (from 1987 to 1997) compared with the pre-screening era, whereas no such change was found in the city of Helsinki or Tampere. When comparing the changes in incidence-based BC mortality during years 1987 to 2009 in Turku to those of Helsinki and the rest of Finland, there was a suggestion of more than 20 percent lower mortality in Turku among oldest age group (75-84 years) compared with the reference residential areas, but the differences were not consistently significant. Interpretation of the study results should be made with caution because there were no random control groups, and on the other hand, the number of cases in subgroups was fairly low to yield definite conclusions. Also due to the many statistical analyses, some of the findings may be due to chance. The results are, however, suggestive for a decrease of BC mortality in the elderly age groups due to wide mammography screening. This finding needs confirmation in further studies before recommending an expansion of mammography screening to women up to the age of 74 years
Resumo:
This thesis concentrates on the validation of a generic thermal hydraulic computer code TRACE under the challenges of the VVER-440 reactor type. The code capability to model the VVER-440 geometry and thermal hydraulic phenomena specific to this reactor design has been examined and demonstrated acceptable. The main challenge in VVER-440 thermal hydraulics appeared in the modelling of the horizontal steam generator. The major challenge here is not in the code physics or numerics but in the formulation of a representative nodalization structure. Another VVER-440 specialty, the hot leg loop seals, challenges the system codes functionally in general, but proved readily representable. Computer code models have to be validated against experiments to achieve confidence in code models. When new computer code is to be used for nuclear power plant safety analysis, it must first be validated against a large variety of different experiments. The validation process has to cover both the code itself and the code input. Uncertainties of different nature are identified in the different phases of the validation procedure and can even be quantified. This thesis presents a novel approach to the input model validation and uncertainty evaluation in the different stages of the computer code validation procedure. This thesis also demonstrates that in the safety analysis, there are inevitably significant uncertainties that are not statistically quantifiable; they need to be and can be addressed by other, less simplistic means, ultimately relying on the competence of the analysts and the capability of the community to support the experimental verification of analytical assumptions. This method completes essentially the commonly used uncertainty assessment methods, which are usually conducted using only statistical methods.
Resumo:
The Pasvik monitoring programme was created in 2006 as a result of the trilateral cooperation and with the intention of following changes in the environment under variable pollution levels. Water quality is one of the basic elements of the programme when assessing the effects of the emissions from the Pechenganikel mining end metallurgical industry (Kola GMK). In this report temporal trends of the water chemistry during 2000–2013 are examined on the basis of the data gathered from lake Inari, River Pasvik and directly connected lakes, Lake Kuetsjarvi and 25 small lakes in three areas: Pechenganikel (Russia), Jarfjord (Norway) and Vätsäri (Finland). The lower parts of the Pasvik watercourse are impacted by both atmospheric pollution and direct wastewater discharge from the Pechenganikel smelter and the settlement of Nikel. The upper section of the watercourse and the small lakes and streams which are not directly linked to the Pasvik Watercourse only receive atmospheric pollution. Lake Inari is free of direct emissions from the Pechenganikel and the water quality is excellent. In River Pasvik and the directly connected lakes copper, nickel, and sulphates are the main pollutants. The most polluted water body is the Kolosjoki River as well as the stream connecting the Lakes Salmijarvi and Kuetsjarvi. The concentration of metals and sulphates in the water notably increases downstream the river lower Lake Kuetsjarvi. In Lake Kuetsjarvi copper and nickel concentrations are clearly elevated and have changed insignificantly in the last years of the research period. In the small border area lakes recovery from acidification in Vätsäri and Jarfjord is evident. Nickel and copper oncentrations have fluctuated but remained on clearly elevated level in Jarfjord and Pechenga. Copper concentrations have been slightly rising in the recent years. In Pechenga area nickel concentrations during the last four monitoring years are decreasing in some places but the regional trend through whole time series is still positive.
Resumo:
The aim of the present study was to measure full epidermal thickness, stratum corneum thickness, rete length, dermal papilla widening and suprapapillary epidermal thickness in psoriasis patients using a light microscope and computer-supported image analysis. The data obtained were analyzed in terms of patient age, type of psoriasis, total body surface area involvement, scalp and nail involvement, duration of psoriasis, and family history of the disease. The study was conducted on 64 patients and 57 controls whose skin biopsies were examined by light microscopy. The acquired microscopic images were transferred to a computer and measurements were made using image analysis. The skin biopsies, taken from different body areas, were examined for different parameters such as epidermal, corneal and suprapapillary epidermal thickness. The most prominent increase in thickness was detected in the palmar region. Corneal thickness was more pronounced in patients with scalp involvement than in patients without scalp involvement (t = -2.651, P = 0.008). The most prominent increase in rete length was observed in the knees (median: 491 µm, t = 10.117, P = 0.000). The difference in rete length between patients with a positive and a negative family history was significant (t = -3.334, P = 0.03), being 27% greater in psoriasis patients without a family history. The differences in dermal papilla distances among patients were very small. We conclude that microscope-supported thickness measurements provide objective results.
Resumo:
Hur arbetar en framgångsrik programmerare? Uppgifterna att programmera datorspel och att programmera industriella, säkerhetskritiska system verkar tämligen olika. Genom en noggrann empirisk undersökning jämför och kontrasterar avhandlingen dessa två former av programmering och visar att programmering innefattar mer än teknisk förmåga. Med utgångspunkt i hermeneutisk och retorisk teori och med hjälp av både kulturvetenskap och datavetenskap visar avhandlingen att programmerarnas tradition och värderingar är grundläggande för deras arbete, och att båda sorter av programmering kan uppfattas och analyseras genom klassisk texttolkningstradition. Dessutom kan datorprogram betraktas och analyseras med hjälp av klassiska teorier om talproduktion i praktiken - program ses då i detta sammanhang som ett slags yttranden. Allt som allt förespråkar avhandlingen en återkomst till vetenskapens grunder, vilka innebär en ständig och oupphörlig cyklisk rörelse mellan att erfara och att förstå. Detta står i kontrast till en reduktionistisk syn på vetenskapen, som skiljer skarpt mellan subjektivt och objektivt, och på så sätt utgår från möjligheten att uppnå fullständigt vetande. Ofullständigt vetande är tolkandets och hermeneutikens domän. Syftet med avhandlingen är att med hjälp av exempel demonstrera programmeringens kulturella, hermeneutiska och retoriska natur.
Resumo:
As the world becomes more technologically advanced and economies become globalized, computer science evolution has become faster than ever before. With this evolution and globalization come the need for sustainable university curricula that adequately prepare graduates for life in the industry. Additionally, behavioural skills or “soft” skills have become just as important as technical abilities and knowledge or “hard” skills. The objective of this study was to investigate the current skill gap that exists between computer science university graduates and actual industry needs as well as the sustainability of current computer science university curricula by conducting a systematic literature review of existing publications on the subject as well as a survey of recently graduated computer science students and their work supervisors. A quantitative study was carried out with respondents from six countries, mainly Finland, 31 of the responses came from recently graduated computer science professionals and 18 from their employers. The observed trends suggest that a skill gap really does exist particularly with “soft” skills and that many companies are forced to provide additional training to newly graduated employees if they are to be successful at their jobs.
Resumo:
The computer game industry has grown steadily for years, and in revenues it can be compared to the music and film industries. The game industry has been moving to digital distribution. Computer gaming and the concept of business model are discussed among industrial practitioners and the scientific community. The significance of the business model concept has increased in the scientific literature recently, although there is still a lot of discussion going on on the concept. In the thesis, the role of the business model in the computer game industry is studied. Computer game developers, designers, project managers and organization leaders in 11 computer game companies were interviewed. The data was analyzed to identify the important elements of computer game business model, how the business model concept is perceived and how the growth of the organization affects the business model. It was identified that the importance of human capital is crucial to the business. As games are partly a product of creative thinking also innovation and the creative process are highly valued. The same applies to technical skills when performing various activities. Marketing and customer relationships are also considered as key elements in the computer game business model. Financing and partners are important especially for startups, when the organization is dependent on external funding and third party assets. The results of this study provide organizations with improved understanding on how the organization is built and what business model elements are weighted.
Resumo:
Today, the user experience and usability in software application are becoming a major design issue due to the adaptation of many processes using new technologies. Therefore, the study of the user experience and usability might be included in every software development project and, thus, they should be tested to get traceable results. As a result of different testing methods to evaluate the concepts, a non-expert on the topic might have doubts on which option he/she should opt for and how to interpret the outcomes of the process. This work aims to create a process to ease the whole testing methodology based on the process created by Seffah et al. and a supporting software tool to follow the procedure of these testing methods for the user experience and usability.