Wet and dry model granulates under mechanical load : a confocal microscopy study

Granular matter, also known as bulk solids, consists of discrete particles with sizes between micrometers and meters. They are present in many industrial applications as well as daily life, like in food processing, pharmaceutics or in the oil and mining industry. When handling granular matter the bulk solids are stored, mixed, conveyed or filtered. These techniques are based on observations in macroscopic experiments, i.e. rheological examinations of the bulk properties. Despite the amply investigations of bulk mechanics, the relation between single particle motion and macroscopic behavior is still not well understood. For exploring the microscopic properties on a single particle level, 3D imaging techniques are required.rnThe objective of this work was the investigation of single particle motions in a bulk system in 3D under an external mechanical load, i.e. compression and shear. During the mechanical load the structural and dynamical properties of these systems were examined with confocal microscopy. Therefor new granular model systems in the wet and dry state were designed and prepared. As the particles are solid bodies, their motion is described by six degrees of freedom. To explore their entire motion with all degrees of freedom, a technique to visualize the rotation of spherical micrometer sized particles in 3D was developed. rnOne of the foci during this dissertation was a model system for dry cohesive granular matter. In such systems the particle motion during a compression of the granular matter was investigated. In general the rotation of single particles was the more sensitive parameter compared to the translation. In regions with large structural changes the rotation had an earlier onset than the translation. In granular systems under shear, shear dilatation and shear zone formation were observed. Globally the granular sediments showed a shear behavior, which was known already from classical shear experiments, for example with Jenike cells. Locally the shear zone formation was enhanced, when near the applied load a pre-diluted region existed. In regions with constant volume fraction a mixing between the different particle layers occurred. In particular an exchange of particles between the current flowing region and the non-flowing region was observed. rnThe second focus was on model systems for wet granular matter, where an additional binding liquid is added to the particle suspension. To examine the 3D structure of the binding liquid on the micrometer scale independently from the particles, a second illumination and detection beam path was implemented. In shear and compression experiments of wet clusters and bulk systems completely different dynamics compared to dry cohesive models systems occured. In a Pickering emulsion-like system large structural changes predominantly occurred in the local environment of binding liquid droplets. These large local structural changes were due to an energy interplay between the energy stored in the binding droplet during its deformation and the binding energy of particles at the droplet interface. rnConfocal microscopy in combination with nanoindentation gave new insights into the single particle motions and dynamics of granular systems under a mechanical load. These novel experimental results can help to improve the understanding of the relationship between bulk properties of granular matter, such as volume fraction or yield stress and the dynamics on a single particle level.rnrn

Revision of a Liquid Fuel Airblast Atomizer and Installation of a Laser Extinction System for Measurement of Soot Produced During Liquid Fuel Combustion

Studying liquid fuel combustion is necessary to better design combustion systems. Through more efficient combustors and alternative fuels, it is possible to reduce greenhouse gases and harmful emissions. In particular, coal-derived and Fischer-Tropsch liquid fuels are of interest because, in addition to producing fewer emissions, they have the potential to drastically reduce the United States' dependence on foreign oil. Major academic research institutions like the Pennsylvania State University perform cutting-edge research in many areas of combustion. The Combustion Research Laboratory (CRL) at Bucknell University is striving to develop the necessary equipment to be capable of both independent and collaborative research efforts with Penn State and in the process, advance the CRL to the forefront of combustion studies. The focus of this thesis is to advance the capabilities of the Combustion Research Lab at Bucknell. Specifically, this was accomplished through a revision to a previously designed liquid fuel injector, and through the design and installation of a laser extinction system for the measurement of soot produced during combustion. The previous liquid fuel injector with a 0.005" hole did not behave as expected. Through spray testing the 0.005" injector with water, it was determined that experimental errors were made in the original pressure testing of the injector. Using data from the spray testing experiment, new theoretical hole sizes of the injector were calculated. New injectors with 0.007" and 0.0085" orifices were fabricated and subsequently tested to qualitatively validate their behavior. The injectors were installed in the combustion rig in the CRL and hot-fire tested with liquid heptane. The 0.0085" injector yielded a manageable fuel pressure and produced a broad flame. A laser extinction system was designed and installed in the CRL. This involved the fabrication of a number of custom-designed parts and the specification of laser extinction equipment for purchase. A standard operating procedure for the laser extinction system was developed to provide a consistent, safe method for measuring soot formation during combustion.

Finnish Miners versus Ivy League Capitalists

Finnish immigrants were recruited to work in the copper mines of Michigan by Boston capitalists intimately associated with Harvard. Boston capitalists defined the culture of capitalism in the United States. They extended their culture across the continent as they acquired mines and railroads. Finnish workers encountered Ivy League capitalism in Michigan, Minnesota, Idaho, Montana, Wyoming, Colorado, Utah and Arizona—often with the same interrelated group of capitalists. The two groups continually met in explosive confrontations in Montana, Michigan, Minnesota, and Arizona. To the Ivy League capitalists, Finns were terrorists who threatened the American social order. For the Finns, it was a war for social justice. In my presentation, I will trace the experience of Finnish workers in corporations controlled by Ivy League capitalists from the first strike at Calumet & Hecla in 1873 to the Red Scare of 1919-1921.

Geology of the Tuxedo Mining District

The Tuxedo mining district lies fifteen miles west of Butte on the south east end of Deer Lodge valley. Prospecting and mining has been carried on in this district for about 20 years. As a result many pits have been dug, several adits have been driven, and two or three shallow shafts have been sunk.

Geology and Ore Deposits of the Salt Chuck-Rush and Brown Mine Area Prince of Wales Island, Alaska

The Salt Chuck, Rush and Brown, and adjacent mines and claims form an area of approximately 15 square miles near the head of Kasaan Bay about 10 miles northwest of the village of Kasaan on Prince of Wales Island in southeastern Alaska. It is an area of moderate relief in which the hills rise from the water’s edge to heights of some 500 feet. Most of the area is covered with dense vegetation and muskeg.

A Geological Report on Several Localities in the Northwestern Tobacco Root Mountains

To better acquaint seniors in Geology and mining with actual field practice, the Montana School of Mines offer a course in Geologic Field Mapping, during the three weeks preceding the opening of the fall semester. The first two weeks are spent in actual field mapping of the geologic formations near Whitehall, Montana, while the third week is spent back on the campus compiling data and finishing maps started in the field.

Preliminary results and documentation of sediment cores CRP2 and CRP-2A from the Ross Sea off Cape Roberts, Antarctica

The site for CRP-2, 14 km east of Cape Roberts (77.006°S; 163.719°E), was selected to overlap the early Miocene strata cored in nearby CRP-1, and to sample deeper into the east-dipping strata near the western margin ofe he Victoria Land Basin to investigate Palaeogene climatic and tectonic history. CRP-2 was cored from 5 to 57 mbsf (metres below the sea floor) (core recovery 91 %), with a deviation resulting in CRP-2A being cored at the same site. CRP-2A reached down to 624mbsf (recovery 95%), and to strata with an age of c. 33-35 Ma. Drilling took place from 16 October to 25 November 1998, on 2.0-2.2 m of sea ice and through 178 m of water. Core fractures and other physical properties, such as sonic velocity, density and magnetic susceptibility, were measured throughout the core. Down-hole logs for these and other properties were run from 63 to 167 mbsf and subsequently from 200 to 623 mbsf, although density and velocity data could be obtained only to 440 mbsf because of hole collapse. Sonic velocity averages c. 2.0 km S-1 for the upper part of the hole, but there is an sharp increase to c. 3.0 km s-1 and also a slight angular unconformity, at 306 mbsf, corresponding most likely to the early/late Oligocene boundary (c. 28-30 Ma). Velocity then increases irregularly to around 3.6 km s-1 at the bottom of the hole, which is estimated to lie 120 m above the V4/V5 boundary. The higher velocities below 306 mbsf probably reflect more extensive carbonate and common pyrite cementation, in patches, nodules, bedding-parallel masses and as vein infills. Dip of the strata also increases down-hole from 3° in the upper 300 in to over 10° at the bottom. Temperature gradient is 21° k-1. Over 2 000 fractures were logged through the hole. Borehole televiewer imagery was obtained for the interval from 200 to 440 mbsf to orient the fractures for stress field analysis. Lithostratigraphical descriptions on a scale of 1:20 are presented for the full length of the core, along with core box images, as a 200 page supplement to this issue. The hole initially passed through a layer of muddy gravel to 5.5 mbsf (Lithological Sub-Unit or LSU 1.1), and then into a Quaternary diatom-bearing clast-rich diamicton to 21 mbsf (LSU 2. l), with an interval of alternating compact diamicton and loose sand, and containing a rich Pliocene foraminiferal fauna, to 27 mbsf (LSU 2.2). The unit beneath this (LSU 3.1) has similar physical properties (sonic velocity, porosity, magnetic susceptibility) and includes diamictites of similar character to those of LSU 2.1 and 2.2, but an early Miocene (c. 19 Ma) diatom assemblage at 28 mbsf (top of LSU 3.1) shows that this sub-unit is part of the older section. The strata beneath 27 mbsf, primary target for the project, extend from early Miocene to perhaps latest Eocene age, and are largely cyclic glacimarine nearshore to offshore sediments. They are described as 41 lithological sub-units and interpreted in terms of 12 recurrent lithofacies. These are 1) mudstone, 2) inter-stratified mudstone and sandstone, 3) muddy very fine to coarse sandstone, 4) well-sorted stratified fine sandstone, 5) moderately to well-sorted, medium-grained sandstone, 6) stratified diamictite, 7) massive diamictite, 8) rhythmically inter-stratified sandstone and mudstone, 9) clast-supported conglomerate, 10) matrix-supported conglomerate, 11) mudstone breccia and 12) volcaniclastic sediment. Sequence stratigraphical analysis has identified 22 unconformity-bounded depositional sequences in pre- Pliocene strata. They typically comprise a four-part architecture involving, in ascending order, 1) a sharp-based coarse-grained unit (Facies 6,7,9 or 10), 2) a fining-upward succession of sandstones (Facies 3 and 4), 3) a mudstone interval (Facies l), in some cases coarsening upward to muddy sandstones (Facies 3), and 4) a sharp-based sandstone dominated succession (mainly Facies 4). The cyclicity recorded by the strata is interpreted in terms of a glacier ice margin retreating and advancing from land to the west, and of rises and falls in sea level. Analysis of sequence periodicity awaits afirmer chronology. However, apreliminary spectral analysis of magnetic susceptibility for a deepwater mudstone within one of the sequences (from 339 to 347 mbsf) reveals ratios between hierarchical levels that are similar to those of the three Milankovitch orbital forcing periodicities. The strata contain a wide range of fossils, the most abundant being marine diatoms. These commonly form up to 5% of the sediment, though in places the core is barren (notably between 300 and 412 mbsf). Fifty samples out of 250 reviewed were studied in detail. The assemblages define ten biostratigraphical zones, some of them based on local or as yet undescribed forms. The assemblages are neritic, and largely planktonic, suggesting that the sea floor was mostly below the photic zone throughout deposition of the corcd sequence. Calcareous nannofossils, representing incursions of ocean surface waters, are much less common (72 out of 183 samples examined) and restricted to mudstone intervals a few tens of metres thick, but are important for dating. Foraminifera are also sparse (73 out of 135 samples) and represented only by calcareous benthic species. Changing assemblages indicate a shift from inshore environments in the early Oligocenc to outer shelf in the late Oligocenc, returning to inshore in the early Miocene. Marine palynomorplis yielded large numbers of well-preserved forms from most of the 116 samples examined. The new in situ assemblagc found last year in CRP-1 is extended down into the late Oligocene and a further new assemblage is found in the early Oligoccnc. Many taxa are new, and cannot us yet contribute to an improved understanding of chronology or ecology. Marine invertebrate macrofossils, mostly molluscs and serpulid tubes, are scattered throughout the core. Preservation is good in mudstones but poor in other lithologies. Climate on land is reflected in the content of terrestrial palynomorphs, which are extremely scarce down to c. 300 mbsf. Some forms are reworked, and others represent a low growing sparse tundra with at least one species of Nothofagus. Beneath this level, a significantly greater diversity and abundance suggests a milder climate and a low diversity woody vegetation in the early Oligocene, but still far short of the richness found in known Eocene strata of the region. Sedimentary facies in the oldest strata also suggest a milder climate in the oldest strata cored, with indications of substantial glacial melt-water discharges, but are typical of a coldcr climate in late Oligocene and early Miocene times. Clast analyses from diamictites reveal weak to random fabrics, suggesting either lack of ice-contact deposition or post-depositional modification, but periods when ice grounded at the drill site are inferred from thin zones of in-situ brecciated rock and soft-sediment folding. These are more common above c. 300 mbsf, perhaps reflecting more extensive glacial advances during deposition of those strata. Erosion of the adjacent Transantarctic Mountains through Jurassic basalt and dolerite-intruded Beacon strata into basement rocks beneath is recorded by petrographical studies of clast and sand grain assemblages. Core below 310 mbsf contains a dominance of fine-grained Jurassic dolerite and basalt fragments along with Beacon-derived coal debris and rounded quartz grains, whereas the strata above this level have a much higher proportion of basement derived granitoids, implying that the large areas of the adjacent mountains had been eroded to basement by the end of the early Oligocene. There is little indication of rift-related volcanism below 310 mbsf. Above this, however, basaltic and trachytic tephras are common, especially from 280 to 200 mbsf, from 150 to 46 mbsf, and in Pliocene LSU 2.2 from 21 to 27 mbsf. The largest volcanic eruptions generated layers of coarse (up to 1 cm) trachytic pumice lapilli between 97 and 114 mbsf. The thickest of these (1.2 m at 112 mbsf) may have produced an eruptive column extending tens of km into the stratosphere. A source within a few tens of km of the drill site is considered most likely. Present age estimates for the pre-Pliocene sequence are based mainly on biostratigraphy (using mainly marine diatoms and to a lesser extent calcareous nannofossils), with the age of the tephra from 112 to 114 mbsf (21.44k0.05 Ma from 84 crystals by Ar-Ar) as a key reference point. Although there are varied and well-preserved microfossil assemblages through most of the sequence (notably of diatoms and marine palynomorphs), they comprise largely taxa either known only locally or as yet undescribed. In addition, sequence stratigraphical analysis and features in the core itself indicate numerous disconformities. The present estimate from diatom assemblages is that the interval from 27 to 130 mbsf is early Miocene in age (c. 19 to 23.5 Ma), consistent with the Ar-Ar age from 112 to 114 mbsf. Diatom assemblages also indicate that the late Oligocene epoch extends from c. 130 to 307 mbsf, which is supported by late Oligocene nannofossils from 130 to 185 mbsf. Strata from 307 to 412 mbsf have no age-diagnostic assemblages, but below this early Oligocene diatoms and nannofossils have been recovered. A nannoflora at the bottom of the hole is consistent with an earliest Oligocene or latest Eocene age. Magnetostratigraphical studies based on about 1000 samples, 700 of which have so far undergone demagnetisation treatment, have provided a polarity stratigraphy of 12 pre-Pliocene magnetozones. Samples above 270 mbsf are of consistently high quality. Below this, magnetic behaviour is more variable. A preliminary age-depth plot using the Magnetic Polarity Time Scale (MPTS) and constrained by biostratigraphical data suggests that episodes of relatively rapid sedimentation took place at CRP-2 during Oligocene times (c. 100 m/My), but that more than half of the record was lost in a few major and many minor disconformities. Age estimates from Sr isotopes in shell debris and further tephra dating are expected to lead to a better comparison with the MPTS. CRP-2/2A has recorded a history of subsidence of the Victoria Land Basin margin that is similar to that found in CIROS-170 km to the south, reflecting stability in both basin and the adjacent mountains in late Cenozoic times, but with slow net accumulation in the middle Cenozoic. The climatic indicators from both drill holes show a similar correspondence, indicating polar conditions for the Quaternary but with sub-polar conditions in the early Miocene-late Oligocene and indications of warmer conditions still in the early Oligocene. Correlation between the CRP-2A core and seismic records shows that seismic units V3 and V4, both widespread in the Victoria Land Basin, represent a period of fluctuating ice margins and glacimarine sedimentation. The next drill hole, CRP-3, is expected to core deep into V5 and extend this record of climate and tectonics still further back in time.

PM2.5, PM10, and PM10-associated elements in the air in Bamako, Mali (2012-2013)

Saharan dust incursions and particulates emitted from human activities degrade air quality throughout West Africa, especially in the rapidly expanding urban centers in the region. Particulate matter (PM) that can be inhaled is strongly associated with increased incidence of and mortality from cardiovascular and respiratory diseases and cancer. Air samples collected in the capital of a Saharan-Sahelian country (Bamako, Mali) between September 2012 - July 2013 were found to contain inhalable PM concentrations that exceeded World Health Organization (WHO) and US Environmental Protection Agency (USEPA) PM2.5 and PM10 24-h limits 58 - 98% of days and European Union (EU) PM10 24-h limit 98% of days. Mean concentrations were 1.2-to-4.5 fold greater than existing limits. Inhalable PM was enriched in transition metals, known to produce reactive oxygen species and initiate the inflammatory reaction, and other potentially bioactive and biotoxic metals/metalloids. Eroded mineral dust composed the bulk of inhalable PM, whereas most enriched metals/metalloids were likely emitted from oil combustion, biomass burning, refuse incineration, vehicle traffic, and mining activities. Human exposure to inhalable PM and associated metals/metalloids over 24-h was estimated. The findings indicate that inhalable PM in the Sahara-Sahel region may present a threat to human health, especially in urban areas with greater inhalable PM and transition metal exposure.

Metodología de simulación del almacenamiento geológico de CO2 como contribución a la solución al problema del Cambio Climático, aplicada a la estructura BG-GE-08 (oeste de la Comunidad de Murcia)

Una de las medidas de mitigación del Cambio Climático propuestas al amparo de la ONU por el IPCC (Intergovermental Panel on Climate Change) en su ‘Informe de Síntesis 2007’ consiste en la puesta en marcha de acciones para la captación y almacenamiento de dióxido de carbono, existiendo tres tipos de formaciones geológicas idóneas para el almacenamiento geológico de este gas: yacimientos de petróleo y gas agotados, capas de carbón no explotables y formaciones salinas profundas. En el caso de las formaciones salinas profundas, el problema fundamental para llevar a cabo un estudio de almacenamiento de CO2, reside en la dificultad de obtención de datos geológicos del subsuelo en una cierta estructura seleccionada, cuyas características pueden ser a priori idóneas para la inyección y almacenamiento del gas. Por este motivo la solución para poder analizar la viabilidad de un proyecto de almacenamiento en una estructura geológica pasa por la simulación numérica a partir de la modelización 3D del yacimiento. Los métodos numéricos permiten simular la inyección de un caudal determinado de dióxido de carbono desde un pozo de inyección localizado en una formación salina. En la presente tesis se ha definido una metodología de simulación de almacenamiento geológico de CO2, como contribución a la solución al problema del Cambio Climático, aplicada de forma concreta a la estructura BG-GE-08 (oeste de la Comunidad de Murcia). Esta estructura geológica ha sido catalogada por el IGME (Instituto Geológico y Minero de España) como idónea para el almacenamiento de dióxido de carbono, dada la existencia de una capa almacén confinada entre dos capas sello. ABSTRACT One of the climate change mitigation proposals suggested by the IPCC (Intergovermental Panel on Climate Change) in its ‘Synthesis Report 2007’ involves the launch of actions for capturing and storing carbon dioxide, existing three different geological structures suitable for gas storage: oil and gas reservoirs already drained, useless coal layers and deep saline structures. In case of deep saline structures, the main problem to develop a study of CO2 storage is the difficulty of obtaining geological data for some selected structure with characteristics that could be suitable for injection and gas storage. According to this situation, the solution to analyze the feasibility of a storage project in a geological structure will need numerical simulation from a 3D model. Numerical methods allow the simulation of the carbon dioxide filling in saline structures from a well, used to inject gas with a particular flow. In this document a simulation methodology has been defined for geological CO2 storage, as a contribution to solve the Climatic Change problem, applied to the structure BG-GE-08 (west of Murcia region). This geological structure has been classified by the IGME (Geological and Mining Institute of Spain) as suitable for the storage of carbon dioxide given the existence of a storage layer confined between two seal layers.

Los espacios mineros abandonados. El caso de la Comunidad de Madrid

La Comunidad de Madrid ha tenido un pasado minero importante que ha dejado su vestigio en el territorio. Actualmente la explotación de minerales no metálicos y de rocas industriales y ornamentales continúa, pero no así la de la minería metálica que en el pasado fue abundante. Hoy en día todas estas minas están abandonadas, dando lugar a zonas degradadas con un elevado riesgo para la seguridad de las personas y de los animales terrestres que habitan por sus inmediaciones, y necesitan ser intervenidas atendiendo, además, a su integración o recuperación ecológica y paisajística en el territorio. El principal propósito de esta tesis es conocer la situación actual que presentan las minas abandonadas de metales y proponer unos modelos de actuación para la rehabilitación e integración de los espacios mineros abandonados de la Comunidad de Madrid, cuya ventaja también estriba en su posible extrapolación a otras aéreas de gestión con una problemática similar. Partiendo de una selección de cincuenta y siete minas de interior metálicas abandonadas, se ha hecho un diagnostico en función de su seguridad (riesgo), interés cultural, arqueológico e histórico y por su afección a espacios protegidos, resultando que en todas, excepto en tres de ellas, es preciso llevar a cabo medidas protectoras y de restauración e integración en el medio ambiente. El conjunto de minas catalogadas de alto riesgo para la seguridad son veintitrés, y sobre ellas se ha realizado un Análisis Clúster, en el que además de los criterios de gestión formulados: seguridad, protección del patrimonio minero-industrial e integración ecológico-paisajística, se han incorporado otros modificadores como distancia a poblaciones, caminos, pistas y vías pecuarias, y accesibilidad. Con los resultados de este análisis se obtienen una clasificación por grupos de las minas en relación con las características intrínsecas de las explotaciones preseleccionadas y la tipología de problemas que presentan, y a partir de ella se plantean soluciones viables que se concretan en la redacción de una serie de anteproyectos tipo. Una de las principales aportaciones es que se trata de un modelo de inventariocaracterización- actuación extrapolable a otros entornos similares con problemáticas parecidas. Las propuestas de actuación que figuran en los anteproyectos tipo se proponen como medidas aplicables en situaciones similares. La tesis además también incorpora una base de datos georreferenciada que permite la localización de las explotaciones mineras abandonadas, el acceso rápido a sus características y a la propuesta de restauración correspondiente. ABSTRACT The Community of Madrid had an important mining past that left its traces in the territory. Currently the explotation of non-metallic minerals and industrial and ornamental rocks continues, but not so much with the metal deposits that were abundant in the past. Today these mines are abandoned, resulting in degraded areas with a high risk to the safety of nearby people and animals that inhabit its vicinity, and they need to be intervened, by tending to their environment integration or ecological and landscape recovery. The main objective of this thesis is to know the current situation of abandoned metal mines and propose an action model for the rehabilitation and integration of abandoned mining areas of the Community of Madrid, whose advantage also is its possible extrapolation to other management areas with similar problems. From a selection of fifty-seven abandoned metal mines, a diagnosis has been made, based on safety (risk), cultural, archaeological and historical interests and how it can be related to protected areas, resulting that all but three of them need measures of protection, restoration and integration to the environment. The set of mines that are classified as a high security risk are twenty-three, and it has been made on them an Cluster Analysis, as in addition to the management formulated criteria, such as safety, protection of mining and industrial heritage and eco-landscape integration, it has been incorporated other modifying variables, such as distance to populations, roads, tracks and livestock paths, and accessibility. With the results of this analysis, a classification of similar groups of mines in relation with the intrinsic characteristics of the preselected mines and typology problems, and from it a set of viable solutions will be specified, being then drafted on a series of proposals. One of the main contributions of this research is that it consists of an inventorycharacterization- action model, which can be extrapolated to other similar environments with similar problems. The action measures that are contained in the proposals are defined as applicable to similar situations. The thesis also incorporates a geo-referenced database that allows finding the location of abandoned mines, thus giving quick access to its features and its corresponding restoration proposal.

Discourses and values underpin public debate on fracking in Spain: a case study at the crossroad

In the EU context extraction of shale and oil gas by hydraulic fracturing (fracking) differs from country to country in terms of legislation and implementation. While fossil fuel extraction using this technology is currently taking place in the UK, Germany and France have adopted respective moratoria. In between is the Spanish case, where hydrocarbon extraction projects through fracking have to undergo mandatory and routine environmental assessment in accordance with the last changes to environmental regulations. Nowadays Spain is at the crossroad with respect to the future of this technology. We presume a social conflictt in our country since the position and strategy of the involved and confronted social actors -national, regional and local authorities, energy companies, scientists, NGO and other social organization- are going to play key and likely divergent roles in its industrial implementation and public acceptance. In order to improve knowledge on how to address these controverted situations from the own engineering context, the affiliated units from the Higher Technical School of Mines and Energy Engineering at UPM have been working on a transversal program to teach values and ethics. Over the past seven years, this pioneering experience has shown the usefulness of applying a consequentialist ethics, based on a case-by-case approach and costs-benefits analysis both for action and inaction. As a result of this initiative a theoretical concept has arisen and crystallized in this field: it is named Inter-ethics. This theoretical perspective can be very helpful in complex situations, with multi-stakeholders and plurality of interests, when ethical management requires the interaction between the respective ethics of each group; professional ethics of a single group is not enough. Under this inter-ethics theoretical framework and applying content analysis techniques, this paper explores the articulation of the discourse in favour and against fracking technology and its underlying values as manifested in the Spanish traditional mass media and emerging social media such as Youtube. Results show that Spanish public discourse on fracking technology includes the costs-benefits analysis to communicate how natural resources from local communities may be affected by these facilities due to environmental, health and economic consequences. Furthermore, this technology is represented as a solution to the "demand of energy" according to the optimistic discourse while, from a pessimistic view, fracking is often framed as a source "environmental problems" and even natural disasters as possible earthquakes. In this latter case, this negative representation could have been influenced by the closure of a macro project to store injected natural gas in the Mediterranean Sea using the old facilities of an oil exploitation in Amposta (Proyecto Cástor). The closure of this project was due to the occurrence of earthquakes whose intensity was higher than the originally expected by the experts in the assessment stage of the project.