Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites

Drilling is a major process in the manufacturing of holes required for the assemblies of composite laminates in aerospace industry. Simulation of drilling process is an effective method in optimizing the drill geometry and process parameters in order to improve hole quality and to reduce the drill wear. In this research we have developed three-dimensional (3D) FE model for drilling CFRP. A 3D progressive intra-laminar failure model based on the Hashin's theory is considered. Also an inter-laminar delamination model which includes the onset and growth of delamination by using cohesive contact zone is developed. The developed model with inclusion of the improved delamination model and real drill geometry is used to make comparison between the step drill of different stage ratio and twist drill. Thrust force, torque and work piece stress distributions are estimated to decrease by the use of step drill with high stage ratio. The model indicates that delamination and other workpiece defects could be controlled by selection of suitable step drill geometry. Hence the 3D model could be used as a design tool for drill geometry for minimization of delamination in CFRP drilling. © 2013 Elsevier Ltd.

MIXED-MODEL PRODUCTION SYSTEM DESIGN FOR AIRCRAFT ASSEMBLY

With the advancement of flexible fixture and flexible tooling, mixed production has become possible for aircraft assembly as the manufacturing processes of different aircraft/sub-assembly models are similar. However, it is a great challenge to model the problem and provide a practical solution due to the low volume and complex constraints of aircraft assemblies. To tackle this problem, this work proposes a methodology for designing the mixed production system, and a new scheduling approach is proposed by combined backward and forward scheduling methods. These methods are validated through a real-life industrial case study. Simulation results show that the number of workstations and the cycle time for making a fuselage can be reduced by 50% and 39% respectively with the newly designed mixed-model system.

Three different types of quasi-model networks: synthesis by group transfer polymerization and characterization

Group transfer polymerization (GTP) chemistry was employed for the preparation of polymethacrylate networks of controlled structure (quasi-model networks) of three different types: (a) regular quasi-model networks, in which all polymer chains were linked at their ends, leaving, in principle, no free chain ends, (b) crosslinked star polymer quasi-model networks, in which star polymers were interlinked via half of their chains, letting the other half free (dangling), and (c) shell-crosslinked polymer quasi-model networks, in which the outer part of the network contained polymer arms (dangling chains). Combination of hydrophilic and hydrophobic monomers led to amphiphilic networks whose aqueous swelling behavior was characterized gravimetrically.

A conserved spider silk domain acts as a molecular switch that controls fibre assembly

A huge variety of proteins are able to form fibrillar structures(1), especially at high protein concentrations. Hence, it is surprising that spider silk proteins can be stored in a soluble form at high concentrations and transformed into extremely stable fibres on demand(2,3). Silk proteins are reminiscent of amphiphilic block copolymers containing stretches of polyalanine and glycine-rich polar elements forming a repetitive core flanked by highly conserved non-repetitive amino-terminal(4,5) and carboxy-terminal(6) domains. The N-terminal domain comprises a secretion signal, but further functions remain unassigned. The C-terminal domain was implicated in the control of solubility and fibre formation(7) initiated by changes in ionic composition(8,9) and mechanical stimuli known to align the repetitive sequence elements and promote beta-sheet formation(10-14). However, despite recent structural data(15), little is known about this remarkable behaviour in molecular detail. Here we present the solution structure of the C-terminal domain of a spider dragline silk protein and provide evidence that the structural state of this domain is essential for controlled switching between the storage and assembly forms of silk proteins. In addition, the C-terminal domain also has a role in the alignment of secondary structural features formed by the repetitive elements in the backbone of spider silk proteins, which is known to be important for the mechanical properties of the fibre.

An EPID-based method for comprehensive verification of gantry, EPID and the MLC carriage positional accuracy in Varian linacs during arc treatments

Background

]In modern radiotherapy, it is crucial to monitor the performance of all linac components including gantry, collimation system and electronic portal imaging device (EPID) during arc deliveries. In this study, a simple EPID-based measurement method has been introduced in conjunction with an algorithm to investigate the stability of these systems during arc treatments with the aim of ensuring the accuracy of linac mechanical performance.

The Varian EPID sag, gantry sag, changes in source-to-detector distance (SDD), EPID and collimator skewness, EPID tilt, and the sag in MLC carriages as a result of linac rotation were separately investigated by acquisition of EPID images of a simple phantom comprised of 5 ball-bearings during arc delivery. A fast and robust software package was developed for automated analysis of image data. Twelve Varian linacs of different models were investigated.

The average EPID sag was within 1 mm for all tested linacs. All machines showed less than 1 mm gantry sag. Changes in SDD values were within 1.7 mm except for three linacs of one centre which were within 9 mm. Values of EPID skewness and tilt were negligible in all tested linacs. The maximum sag in MLC leaf bank assemblies was around 1 mm. The EPID sag showed a considerable improvement in TrueBeam linacs.

The methodology and software developed in this study provide a simple tool for effective investigation of the behaviour of linac components with gantry rotation. It is reproducible and accurate and can be easily performed as a routine test in clinics.

An official American thoracic society research statement: Comparative effectiveness research in pulmonary, critical care, and sleep medicine

Background: Comparative effectiveness research (CER) is intended to inform decision making in clinical practice, and is central to patientcentered outcomes research (PCOR). Purpose: To summarize key aspects of CER definitions and provide examples highlighting the complementary nature of efficacy and CER studies in pulmonary, critical care, and sleep medicine. Methods: An ad hoc working group of the American Thoracic Society with experience in clinical trials, health services research, quality improvement, and behavioral sciences in pulmonary, critical care, and sleepmedicinewas convened. The group used an iterative consensus process, including a reviewbyAmerican Thoracic Society committees and assemblies. Results: The traditional efficacy paradigm relies on clinical trials with high internal validity to evaluate interventions in narrowly defined populations and in research settings. Efficacy studies address the question, "Can it work in optimal conditions?" The CER paradigm employs a wide range of study designs to understand the effects of interventions in clinical settings. CER studies address the question, "Does it work in practice?" The results of efficacy and CER studies may or may not agree. CER incorporates many attributes of outcomes research and health services research, while placing greater emphasis on meeting the expressed needs of nonresearcher stakeholders (e.g., patients, clinicians, and others). Conclusions: CER complements traditional efficacy research by placing greater emphasis on the effects of interventions in practice, and developing evidence to address the needs of the many stakeholders involved in health care decisions. Stakeholder engagement is an important component of CER. Copyright © 2013 by the American Thoracic Society.

Structure and dynamics of aqueous 2-propanol: A THz-TDS, NMR and neutron diffraction study

Aqueous liquid mixtures, in particular, those involving amphiphilic species, play an important role in many physical, chemical and biological processes. Of particular interest are alcohol/water mixtures; however, the structural dynamics of such systems are still not fully understood. Herein, a combination of terahertz time-domain spectroscopy (THz-TDS) and NMR relaxation time analysis has been applied to investigate 2-propanol/water mixtures across the entire composition range; while neutron diffraction studies have been carried out at two specific concentrations. Excellent agreement is seen between the techniques with a maximum in both the relative absorption coefficient and the activation energy to molecular motion occurring at ∼90 mol% H₂O. Furthermore, this is the same value at which well-established excess thermodynamic functions exhibit a maximum/minimum. Additionally, both neutron diffraction and THz-TDS have been used to provide estimates of the size of the hydration shell around 2-propanol in solution. Both methods determine that between 4 and 5 H₂O molecules per 2-propanol are found in the 2-propanol/water clusters at 90 mol% H₂O. Based on the acquired data, a description of the structure of 2-propanol/water across the composition range is presented.

Communication Nonlinearities Techniques for Analysis of Passive Intermodulation

The X-parameter based nonlinear modelling tools have been adopted as the foundation for the advanced methodology
of experimental characterisation and design of passive nonlinear devices. Based upon the formalism of the Xparameters,
it provides a unified framework for co-design of antenna beamforming networks, filters, phase shifters and
other passive and active devices of RF front-end, taking into account the effect of their nonlinearities. The equivalent
circuits of the canonical elements are readily incorporated in the models, thus enabling evaluation of PIM effect on the
performance of individual devices and their assemblies. An important advantage of the presented methodology is its
compatibility with the industry-standard established commercial RF circuit simulator Agilent ADS.
The major challenge in practical implementation of the proposed approach is concerned with experimental retrieval of the X-parameters for canonical passive circuit elements. To our best knowledge commercial PIM testers and practical laboratory test instruments are inherently narrowband and do not allow for simultaneous vector measurements at the PIM and harmonic frequencies. Alternatively, existing nonlinear vector analysers (NVNA) support X-parameter measurements in a broad frequency bands with a range of stimuli, but their dynamic range is insufficient for the PIM characterisation in practical circuits. Further opportunities for adaptation of the X-parameters methodology to the PIM
characterisation of passive devices using the existing test instruments are explored.

Robust Room Temperature Hysteresis in an FeIII Spin Crossover Metallomesogen

The high temperature magnetic and structural properties of an amphiphilic iron(III) spin crossover complex are reported. Thermal cycling reveals a scan rate-dependent 20 K thermal hysteresis in the mT vs. T data close to room temperature. A fast scan rate is essential for the hysteresis but it is robust and reproducible after multiple thermal cycles. Differential scanning calorimetry and cross polarized microscopy are used to show that the magnetic switching aligns with a material state change from solid to ordered liquid phase on warming.

Compósitos de polímeros naturais e nanopartículas metálicas

Esta tese descreve diversas estratégias de preparação assim como a caracterização de nanocompósitos com base em distintos biopolímeros. Em particular foi estudada a incorporação de nanopartículas (NPs) metálicas, nomeadamente de Ag, Cu e Au. Estes nanomateriais apresentam um potencial prático enorme em diversas áreas, no entanto foi investigada especificamente a sua aplicação como materiais antimicrobianos. No primeiro capítulo apresenta-se uma revisão bibliográfica, onde são realçados os principais tópicos discutidos ao longo da tese. Inicialmente apresenta-se uma contextualização deste trabalho sendo seguidamente apresentadas algumas considerações sobre nanocompósitos e o seu impacto tecnológico atual. Em seguida, descrevem-se as vantagens do uso de NPs como cargas nos materiais compósitos especificamente no caso de bionanocompósitos. Foi focado o uso da celulose como matriz uma vez que foi o composto “base” usado neste trabalho. Fez-se a descrição exaustiva das metodologias existentes na literatura para a preparação dos nanocompósitos celulósicos com diferentes NPs metálicas assim como das respetivas aplicações. Dentro das aplicações, foi dado especial destaque às propriedades antimicrobianas dos materiais preparados seja a nível da sua atividade antibacteriana ou antifúngica. Esta introdução privilegia o trabalho relacionado diretamente com os sistemas descritos nos capítulos subsequentes. No segundo capítulo apresentam-se os resultados obtidos para nanocompósitos de prata em matriz celulósica. Através do uso de metodologias, tais como a síntese in situ e a pós-deposição, foram preparados diversos materiais usando dois substratos celulósicos distintos nomeadamente a celulose vegetal e bacteriana. Estes nanocompósitos foram caracterizados em termos da sua morfologia e composição química, verificando-se a importância destas características na sua atividade antibacteriana. Foi verificado que nanocompósitos com teores de Ag de 5 x 10-4 (% m/m) são suficientes para obter atividade antibacteriana. A libertação de Ag(I) foi estudada em alguns destes materiais de modo a tentar perceber o mecanismo subjacente a este tipo de nanocompósitos. No terceiro capítulo é apresentado o estudo de NPs coloidais de Ag e Au como cargas para a preparação de nanocompósitos à base de quitosano nãomodificado e modificado quimicamente (derivado solúvel em água e derivado anfifílico). Foram preparados filmes finos de espessura de 9-14 μm, caracterizando-se as suas propriedades óticas e antibacterianas. As propriedades óticas foram ajustadas, quer pela variação do teor de NPs de Ag (0,3-3,9% m/m) ou pela utilização de amostras de NPs com distribuição de tamanho de partícula distinta. Foi investigada a atividade antibacteriana tanto para bactérias Gram-negativas (Klebsiella pneumoniae e Escherichia coli) como para Gram-positivas (Staphylococcus aureus). Para nanocompósitos preparados com o quitosano não modificado verificou-se uma dependência em função do teor de Ag. No caso do uso de derivados modificados, os materiais preparados mostraram uma eficiência superior, mesmo sem NPs de Ag. No quarto capítulo é apresentada a síntese e caracterização de nanocompósitos de pululano e NPs de Ag. Neste estudo é avaliada a atividade antifúngica dos filmes compósitos preparados contra o Aspergillus niger usando protocolos padrão. Estes materiais foram preparados na forma de filmes (66-74 μm de espessura) por evaporação de solvente da mistura de pululano e coloides de Ag. Foi observado o aumento da inibição do fungo na presença dos nanocompósitos, tendo sido pela primeira vez mostrado o efeito disruptivo destes materiais sobre os esporos do A. niger através da análise das imagens de SEM. Este efeito ocorre na presença dos filmes devido à presença das cargas de NPs de Ag dispersas no pululano. O desenvolvimento de materiais de papel com NPs de Cu é um desafio devido à propensão destas espécies em oxidar sob condições ambiente. No quinto capítulo é descrita pela primeira vez o estudo comparativo do crescimento e estabilidade de NPs de Cu em celulose vegetal e bacteriana. Para além disso foi avaliado o uso de nanoestruturas com diferentes dimensionalidades como cargas, nomeadamente nanoesferas e nanofios. Foi observado que o uso de nanofios aumenta a resistência à oxidação destes nanocompósitos para tempos de exposição ao ar mais prolongados. As matrizes celulósicas apresentam comportamento distinto no crescimento e/ou adsorção das NPs de Cu. A celulose bacteriana foi o substrato mais eficiente para retardar a oxidação das NPs. A atividade antibacteriana destes nanocompósitos foi avaliada. Ao longo desta dissertação são apresentados métodos distintos para a obtenção de nanocompósitos com base em biopolímeros e NPs metálicas. Estes estudos permitiram não só a preparação de novos nanocompósitos mas também compreender e otimizar os mecanismos subjacentes à sua preparação. Ao mesmo tempo, este trabalho contribuiu para a transferência de tecnologia e conhecimento entre a área da Nanotecnologia e a área dos materiais derivados de fontes renováveis. As propriedades apresentadas por estes nanomateriais mostraram a sua possível aplicação como novos materiais antimicrobianos, no entanto é possível antecipar futuras aplicações em outras áreas tecnológicas.

Qualified exceptionalism: the US Congress in comparative perspective

The framers of the American Constitution devised a singular bicameral legislative body, which invested substantial power in both a broadly representative lower chamber and a second "deliberative" chamber that was both insulated from the voters and unrepresentative of the population as a whole. Until the early 20th Century, the singular U.S. Congress changed little, but with growing national responsibilities, it sought to construct organizational forms that could address a consistently stronger executive. Since the 1980s, the Congress has relied increasingly on stronger parties to organize its activities. This development, embraced in turn by Democrats and Republicans, has led to changes that have edged the Congress in the direction of parliamentary democracies. We conclude this analysis has real, but limited utility, as congressional party leaders continue to barter for votes and, in the context, of narrow chamber majorities, often rely heavily on presidential assistance on divisive issues that are important to their party brand. Yet, the traditional features of the American separated system - bicameralism, the committee systems, and the centrifugal forces emanating from diverse congressional districts, increasingly complex policy issues, and the fear of electoral retribution - also remain strong, and effectively constrain the influence of leaders.'Qualified exceptionalism' thus most aptly describes the contemporary American Congress, which remains 'exceptional,' but less than unique, as it responds to many of the same forces, in some of the same ways (e.g., strong parties), as do many other representative assemblies around the world.

The resilience of democratic institutions in Britain, Australia and the United States under conditions of total war

To what extent are democratic institutions resilient when nation states mobilise for war? Normative and empirical political theorists have long argued that wars strengthen the executive and threaten constitutional politics. In modern democracies, national assemblies are supposed to hold the executive to account by demanding explanations for events and policies; and by scrutinising, reviewing and, if necessary, revising legislative proposals intended to be binding on the host society or policies that have been implemented already. This article examines the extent to which the British and Australian parliaments and the United States Congress held their wartime executives to account during World War II. The research finds that under conditions approaching those of total war, these democratic institutions not only continued to exist, but also proved to be resilient in representing public concerns and holding their executives to account, however imperfectly and notwithstanding delegating huge powers. In consequence, executives—more so British and Australian ministers than President Roosevelt—were required to be placatory as institutional and political tensions within national assemblies and between assemblies and executives continued, and assemblies often asserted themselves. In short, even under the most onerous wartime conditions, democratic politics mattered and democratic institutions were resilient.

Comparative study of amine solutions used in CO2 absorption/desorption cycles

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química

Effects of large anphiphilic ligands upon the spectra and kinetics of cytochrome C oxidase

Cytoch ro me c oxidase (ferrocytochrome c : 02 oxidoreductase ; EC 1.9. 3.1) is the terminal enzyme in the mitochondrial electron transport chain, catalyzing the transfer of electrons from ferrocytochrome c to molecular oxygen. The effects of two large amphiphilic molecules .. valinomycin and dibucaine upon the spectra of the isolated enzyme and upon the activity of both isolated enzyme and enzyme in membrane systems are investigated by using spectrophotometric and oxygen electrode techniques. The results show that both valinomycin and dibucaine change the Soret region of the spectrum and cause a partial inhibition in a concentration range higher than that in which they act as ionophores. It is concluded that both valinomycin and dibucain~ binding induce a conformational change of the protein structure which modifies the spectrum of the a3 CUB centre and diminishes the rate of electron transfer between cytochrome a and the binuclear centre.

The role of a minor party : a comparative study of the British Liberal Party and the Australian Country Party since 1918

and the Australian Country Party since 1918. 2. The thesis examines the proposition that the role of a minor party is determined, not by its total strength expressed as a percentage of the national vote, but by how its strength is concentrated. Australia and Britain were chosen for the comparison because of the many similarities in political culture and in the extent of class voting. Each country has a party - the Country Party in Australia and the Liberal Party in Britain - which has had a distinct impact on the political scene in their respective countries. In the period from 1918 to the present day neither party, at the national level, has ever held the largest number of seats in parliament let alone a majority of seats, and it is in this sense that they are herein defined as minor parties. In the thesis the constitutional background of and differences between Australia and Britain are reviewed, followed by a brief historical picture of each of the two parties being studied. The sources of supporc of the two parties are analysed and it is here that real differences emerge. The Country Party in Australia is a deliberately sectional party with a narrow rural base, whereas the British Liberal Party is more broadly based than either the Labour or Conservative Parties in Britain. 3. Party leadership and organisation are then discussed. Both parties have had outstanding leaders, Earle Page and McEwen for the Country Party; Asquith, Lloyd George and Grimond for the Liberal Party. Both parties have had relatively fewer leaders than their major party opponents. However, whereas the Country Party has been free of serious splits the Liberal Party was shattered on the leadership struggles of Asquith and Lloyd George. Both parties have been identified with decentralisation of state power, the Country Party through its support, albeit sometimes lukewarm of the New States Movement; the Liberal Party through its espousal of a federal system for Britain with separate Welsh, Scottish and regional assemblies. Unfortunately for the British Liberal Party the beneficiaries of their policies in this area have been relatively new nationalist parties in both Wales arid Scotland. The major part of the thesis is devoted to a study of how the electoral systems in the two countries have, in practice, worked to the advantage or disadvantage of the Country Party and the British Liberal Party. The Country Party has been as consistently over-represented in the House of Representatives as the Liberal Party has been under-represented in the British House of Commons. With the even distribution of its support the introduction of the single transferable vote, in itself, would bring little benefit to the British Liberal Party in terms of seats. Multimember urban constituencies combined with some type of list system are the only way the Liberals are likely to obtain House of Commons seats in proportion to their votes. 4. Finally, the relations of the two minor parties with their respective major parties are considered. In the conclusion the future of the two parties is reviewed. In general terms it appears that the Country Party is faced with a slow decline. Although the British Liberal Party made a major breakthrough, in terms of votes, in the February 1974 election, they were unable to maintain this momentum in the October election, even though they lost very little ground. In the long term they must make an inroad into Labour held seats if they are to progress further.