Processamento mínimo de melão tipo Orange Flesh e de melancia 'Crimson Sweet'

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Qualidade do melão 'Orange flesh' minimamente processado e submetido a diferentes métodos de conservação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do Ácido Ascórbico em melões 'Orange Flesh' minimamente processados

The aim of this work was to evaluate the application of different concentrations of ascorbic acid on Orange Flesh melon. Whole Melons were sanifi ed with 500 mg L-1 of sodium hypochlorite for 10 minutes and the cuts into cubes with 100 mg L-1 for 1 minute before being tested under different concentrations of ascorbic acid (0, 1, 2 and 3%) in immersion at room temperature for 10 minutes. After drainage, the cuts were packed in PET packages lined with polyethylene fi lm of 18 µm and stored at 5 ± 1°C and 85 ± 5% of RH for 8 days, being evaluated every 2 days. Physicochemical, microbiological and sensorial analyses were performed. The experimental design utilized for the experiment was the completely randomized in factorial scheme. Ten replicates were used for non-destructive analyses and 3 replicates were used for destructive ones. The application of ascorbic acid reduced the loss of mass; the fruits presented a low population of psychrotrophic bacterias, fi lamentous, fungi and yeasts, reduction of soluble solids, pH and fi rmness and, consequently, extended postharvest life of the fruits by 2 days. The appearance, fl avor and taste were also affected. The application of 1% of ascorbic acid was the best treatment for the fresh cuts “Orange Flesh” melons.

A remarkable new species of flesh-fly mimicking weevil (Coleoptera: Curculionidae: Conoderinae) from Southeastern Brazil

Timorus sarcophagoides, new species (type-locality: Brazil, Minas Gerais, Santana do Riacho - Serra do Cipo, 43 degrees 35'W 19 degrees 17'S, 1200-1300m ASL), is described and illustrated. The new species can be distinguished mainly from the other species of the genus by the sexual dimorphism of the male rostrum armed with a hooked tubercle at the base of the dorsal carina, while the tubercle is absent in the female and the corresponding region of the carina is only tumid. The new species has a striking pattern of coloration and behavior that mimics flesh-flies in the family Sarcophagidae. Observations on the natural history of the new species are reported and discussed.

Characterization of the genetic control of fruit flesh color in peach

The analysis of a carotenoid cleavage dioxygenase gene in a pool of peach cultivars revealed the existence of a functional allele (W1), associated with the white flesh trait, and three independent mutations associated with the yellow phenotype: a 2 bp insertion within a repetitive sequence (y1), a large transposable element within the intron (y2) and a single base substitution generating a premature stop codon (y3). Based on these evidences, the yellow flesh phenotype seems to have arisen from at least three independent mutational events.

Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r(2) ? -0.86) as well as calcium release (r(2) ? -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r(2) = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite

PURPOSE: To investigate the effect of curing rate on softening in ethanol, degree of conversion, and wear of resin composites. METHOD: With a given energy density and for each of two different light-curing units (QTH or LED), the curing rate was reduced by modulating the curing mode. Thus, the irradiation of resin composite specimens (Filtek Z250, Tetric Ceram, Esthet-X) was performed in a continuous curing mode and in a pulse-delay curing mode. Wallace hardness was used to determine the softening of resin composite after storage in ethanol. Degree of conversion was determined by infrared spectroscopy (FTIR). Wear was assessed by a three-body test. Data were submitted to Levene's test, one and three-way ANOVA, and Tukey HSD test (alpha = 0.05). Results: Immersion in ethanol, curing mode, and material all had significant effects on Wallace hardness. After ethanol storage, resin composites exposed to the pulse-delay curing mode were softer than resin composites exposed to continuous cure (P< 0.0001). Tetric Ceram was the softest material followed by Esthet-X and Filtek Z250 (P< 0.001). Only the restorative material had a significant effect on degree of conversion (P< 0.001): Esthet-X had the lowest degree of conversion followed by Filtek Z250 and Tetric Ceram. Curing mode (P= 0.007) and material (P< 0.001) had significant effect on wear. Higher wear resulted from the pulse-delay curing mode when compared to continuous curing, and Filtek Z250 showed the lowest wear followed by Esthet-X and Tetric Ceram.

Treatment Technology Validation for Water Softening Technology

MT Hard Water of Montana Tech of the University of Montana submits Task 3: Treatment Technology Validation for Water Softening Technology as an entry into the 2012 WERC Environmental Design Contest. Currently, there are several commercially available technologies that treat water hardness. The objective of this project is to develop a strategy to evaluate and validate different water hardness treatment technologies. MT Hard Water (MTHW) has studied several technologies including: electromagnetic water treatment, ion exchange, and reverse osmosis. For validation purposes, an electromagnetic water treatment system (ScaleRID) was selected according to the WERC task description.

Softening the Lower Crust: Modes of Syn-Transport Transposition Around and Adjacent to a Deep Crustal Granulite Nappe, Parry Sound Domain, Grenville Province, Ontario, Canada

The Parry Sound domain is a granulite nappe-stack transported cratonward during reactivation of the ductile lower and middle crust in the late convergence of the Mesoproterozoic Grenville orogeny. Field observations suggest the following with respect to the ductile sheath: (1) Formation of a carapace of transposed amphibolite facies gneiss derived from and enveloping the western extremity of the Parry Sound domain and separating it from high-strain gneiss of adjacent allochthons. This ductile sheath formed dynamically around the moving granulite nappe through the development of systems of progressively linked shear zones. (2) Transposition initiated by hydration (amphibolization) of granulite facies gneiss by introduction of fluid along cracks accompanying pegmatite emplacement. Shear zones nucleated along pegmatite margins and subsequently linked and rotated. The source of the pegmatites was most likely subjacent migmatitic and pegmatite-rich units or units over which Parry Sound domain was transported. Comparison of gneisses of the ductile sheath with high-strain layered gneiss of adjacent allochthons show the mode of transposition of penetratively layered gneiss depended on whether or not the gneiss protoliths were amphibolite or granulite facies tectonites before initiation of transposition, resulting in, e.g., folding before shearing, no folding before shearing, respectively. Meter-scale truncation along high-strain gradients at the margins of both types of transposition-related shear zones observed within and marginal to Parry Sound domain mimic features at kilometer scales, implying that apparent truncation by transposition originating in a manner similar to the ductile sheath may be a common feature of deep crustal ductile reworking. Citation: Culshaw, N., C. Gerbi, and J. Marsh (2010), Softening the lower crust: Modes of syn-transport transposition around and adjacent to a deep crustal granulite nappe, Parry Sound domain, Grenville Province, Ontario, Canada, Tectonics, 29, TC5013, doi:10.1029/2009TC002537.

Softening-up mannan-rich cell walls

The softening and degradation of the cell wall (CW), often mannan enriched, is involved in several processes during development of higher plants, such as meristematic growth, fruit ripening, programmed cell death, and endosperm rupture upon germination. Mannans are also the predominant hemicellulosic CW polymers in many genera of green algae. The endosperm CWs of dry seeds often contain mannan polymers, sometimes in the form of galactomannans (Gal-mannans). The endo-beta-mannanases (MANs) that catalyse the random hydrolysis of the beta-linkage in the mannan backbone are one of the main hydrolytic enzymes involved in the loosening and remodelling of CWs. In germinating seeds, the softening of the endosperm seed CWs facilitates the emergence of the elongating radicle. Hydrolysis and mobilization of endosperm Gal-mannans by MANs also provides a source of nutrients for early seedling growth, since Gal-mannan, besides its structural role, serves as a storage polysaccharide. Therefore, the role of mannans and of their hydrolytic enzymes is decisive in the life cycle of seeds. This review updates and discusses the significance of mannans and MANs in seeds and explores the increasing biotechnological potential of MAN enzymes.

Genes encoding beta-mannanases in Brachypodium distachyon seeds have a role not only in cell wall softening upon germination sensu stricto but also during post-germinative reserve mobilization

En la coleorriza en semillas de Brachypodium son abundantes los mananos y estos van desapareciendo conforme progresa la germinación (entre 12-27 h), al mismo tiempo se observa un pico de actividad endo-beta-mananasa. Se ha establecido que de los 6 miembros de la familia MAN en B. distachyon 3 se expresan en el embrión en germinación y BdMAN3 también es abundante en la aleurona.