Hiljaisen tiedon siirtämisen prosessi mentoroinnissa – näkökulmana kognitiivinen oppipoikamalli

Hiljainen tieto muodostaa organisaatioiden keskeisen kilpailutekijän, sillä sitä on vaikea kopioida. Hiljaista tietoa pyritään siirtämään erilaisia osaamisen kehittämisen menetelmiä hyödyntäen. Tässä tutkielmassa tutkitaan, miten hiljaista tietoa siirretään mentoroinnissa. Mentorointiin liittyvissä tutkimuksissa ei ole tutkittu sitä vuorovaikutukseen perustuvaa prosessia, jonka aikana hiljaista tietoa siirretään mentorilta aktorille. Tämä tutkielma toi lisää tietoa tähän tutkimusaukkoon. Tutkielman teoreettisessa osiossa esiteltiin kolme näkökulmaa, jotka muo-dostivat tutkielman viitekehyksen: hiljainen tieto ja sen siirtäminen, mentorointi sekä kognitiivinen oppipoikamalli. Tutkimusmenetelmänä käytettiin fenomenografista tapaustutkimusta. Tutkimuksen kohderyhmän muodostivat neljä mentori-aktori –paria, joita haastateltiin teemahaastattelulla. Empiiriset tulokset osoittivat, että hiljaisen tiedon siirtäminen mentoroinnissa tapahtui kognitiivisen oppipoikamallin vaiheita hyödyntäen. Kaikki kognitiivisen oppipoikamallin vaiheet esiintyivät mentorointiprosessissa. Siirrettävässä hiljaisessa tiedossa näyttäytyivät tiedon toiminnallinen, situationaalinen ja sosiaalinen luonne. Keskeisimmiksi hiljaisen tiedon siirtämisen menetelmiksi osoittautuivat mentorin läsnäolo, kuuntelu, kysymysten tekeminen ja aktorin oivalluttaminen. Tutkielman keskeisenä tuloksena ja toimenpide-ehdotuksena esitettiin hiljaisen tiedon siirtämisen malli mentoroinnissa, joka kehitettiin tutkimuksen teoreettisen viitekehyksen ja tutkimuksesta saatujen tulosten pohjalta.

Tuotannonohjauksen kehittäminen sähkömoottoreiden huoltotoiminnassa

Diplomityön kohdeyrityksen liiketoiminta on kokenut viime aikoina merkittäviä muutoksia lisääntyneen volyymin, vaihtuneiden toimitilojen ja konsernin taloudellisesti haastavan tilanteen johdosta. Olosuhteiden muuttuessa ja taloudellisten vaikeuksien kasvaessa on tuotannonohjauksen kehittäminen jäänyt yksikössä takaa-alalle, mikä näkyy pitkittyneinä toimitusaikoina ja laskutusviiveenä, heikkona ohjattavuutena ja täten myös kannattavuuden huonontumisena. Työn tavoitteena onkin tutkia sähkömoottorihuoltotoiminnan nykytilaa ja löytää käytännönläheisiä ja nopeasti toteutettavissa olevia ratkaisuja tuotannonohjauksen kehittämiseksi. Työn teoreettisena viitekehyksenä käytettiin tuotannonohjauksen perusproblema-tiikkaa käsitteleviä teoksia, kuten myös tuotannonohjauksen kehityshankkeisiin liittyvää materiaalia. Tämän lisäksi työhön on pyritty saamaan lisänäkemystä suo-rittamalla benchmarking -vierailuja yhteistyöyrityksiin, jossa on hiljattain suoritettu vastaavan kaltaisia, onnistuneita tuotannonohjauksen kehityshankkeita. Työn empiirinen osuus jaoteltiin kahteen teemaan; nykytila-analyysiin ja toimenpide-ehdotuksiin. Nykytila-analyysi pyrittiin luomaan mahdollisimman kattavaksi sisällyttämällä siihen näkökulmia niin tuotannollisten lukujen kuin henkilöstön nä-kemysten perusteella. Analyysin pohjalta yritykselle laadittiin ehdotuksia käytän-nönläheisistä, nopeasti toteutettavissa olevista toimenpiteistä kuten myös ehdotuksia tuotannon jatkokehityksestä.

Uuden palveluprosessin kehittämistyökalujen käyttö B-to-B PK-yrityksissä

Kandidaatintyö käsittelee yritysten välistä palveluliiketoimintaa, uuden palvelun kehittämisprosessia ja siihen liittyviä kehitystyökaluja sekä systemaattisen palvelukehityksen tärkeyttä. Työssä keskitytään pieniin ja keskisuuriin palveluyrityksiin näiden muodostaessa suurimman osan palvelualan yrityksistä ja joissa tutkimusten mukaan palvelujen kehitys on heikkolaatuista sekä kehitystyökalujen tuntemus vähäistä. Työ tehdään kirjallisuuskatsauksena ja tuloksena muodostetaan opas, jonka tarkoituksena on havainnollistaa case-yrityksen näkökulmasta johdonmukaisesti ja yksinkertaisia esimerkkejä käyttäen systemaattista uuden palvelun kehitysprosessia ja millaisia asioita prosessin eri vaiheissa täytyy ottaa huomioon, sekä miten kehitystyökaluja käytetään. Opas on suunnattu lähinnä B-to-B markkinoilla toimiville palvelualan pk-yrityksille, mutta työssä esitetty kehitysprosessi ja työkalut soveltuvat myös muille palveluyrityksille yleiskäyttöisyytensä vuoksi.

A software engineering approach to distributed systems for composite modeling

The goal of this thesis is to define and validate a software engineering approach for the development of a distributed system for the modeling of composite materials, based on the analysis of various existing software development methods. We reviewed the main features of: (1) software engineering methodologies; (2) distributed system characteristics and their effect on software development; (3) composite materials modeling activities and the requirements for the software development. Using the design science as a research methodology, the distributed system for creating models of composite materials is created and evaluated. Empirical experiments which we conducted showed good convergence of modeled and real processes. During the study, we paid attention to the matter of complexity and importance of distributed system and a deep understanding of modern software engineering methods and tools.

Customer Discovery and Customer Validation in Lean Software Startups

The traditional business models and the traditionally successful development methods that have been distinctive to the industrial era, do not satisfy the needs of modern IT companies. Due to the rapid nature of IT markets, the uncertainty of new innovations‟ success and the overwhelming competition with established companies, startups need to make quick decisions and eliminate wasted resources more effectively than ever before. There is a need for an empirical basis on which to build business models, as well as evaluate the presumptions regarding value and profit. Less than ten years ago, the Lean software development principles and practices became widely well-known in the academic circles. Those practices help startup entrepreneurs to validate their learning, test their assumptions and be more and more dynamical and flexible. What is special about today‟s software startups is that they are increasingly individual. There are quantitative research studies available regarding the details of Lean startups. Broad research with hundreds of companies presented in a few charts is informative, but a detailed study of fewer examples gives an insight to the way software entrepreneurs see Lean startup philosophy and how they describe it in their own words. This thesis focuses on Lean software startups‟ early phases, namely Customer Discovery (discovering a valuable solution to a real problem) and Customer Validation (being in a good market with a product which satisfies that market). The thesis first offers a sufficiently compact insight into the Lean software startup concept to a reader who is not previously familiar with the term. The Lean startup philosophy is then put into a real-life test, based on interviews with four Finnish Lean software startup entrepreneurs. The interviews reveal 1) whether the Lean startup philosophy is actually valuable for them, 2) how can the theory be practically implemented in real life and 3) does theoretical Lean startup knowledge compensate a lack of entrepreneurship experience. A reader gets familiar with the key elements and tools of Lean startups, as well as their mutual connections. The thesis explains why Lean startups waste less time and money than many other startups. The thesis, especially its research sections, aims at providing data and analysis simultaneously.

Customer Discovery and Customer Validation in Lean Software Startups

The traditional business models and the traditionally successful development methods that have been distinctive to the industrial era, do not satisfy the needs of modern IT companies. Due to the rapid nature of IT markets, the uncertainty of new innovations‟ success and the overwhelming competition with established companies, startups need to make quick decisions and eliminate wasted resources more effectively than ever before. There is a need for an empirical basis on which to build business models, as well as evaluate the presumptions regarding value and profit. Less than ten years ago, the Lean software development principles and practices became widely well-known in the academic circles. Those practices help startup entrepreneurs to validate their learning, test their assumptions and be more and more dynamical and flexible. What is special about today‟s software startups is that they are increasingly individual. There are quantitative research studies available regarding the details of Lean startups. Broad research with hundreds of companies presented in a few charts is informative, but a detailed study of fewer examples gives an insight to the way software entrepreneurs see Lean startup philosophy and how they describe it in their own words. This thesis focuses on Lean software startups‟ early phases, namely Customer Discovery (discovering a valuable solution to a real problem) and Customer Validation (being in a good market with a product which satisfies that market). The thesis first offers a sufficiently compact insight into the Lean software startup concept to a reader who is not previously familiar with the term. The Lean startup philosophy is then put into a real-life test, based on interviews with four Finnish Lean software startup entrepreneurs. The interviews reveal 1) whether the Lean startup philosophy is actually valuable for them, 2) how can the theory be practically implemented in real life and 3) does theoretical Lean startup knowledge compensate a lack of entrepreneurship experience. A reader gets familiar with the key elements and tools of Lean startups, as well as their mutual connections. The thesis explains why Lean startups waste less time and money than many other startups. The thesis, especially its research sections, aims at providing data and analysis simultaneously.

Perception des professionnels de la santé par rapport à l'introduction d'une plateforme Web 2.0 dans leur pratique

Introduction : Les pressions sont fortes envers les professionnels de la santé pour qu’ils appliquent une pratique factuelle. Toutefois, un écart important demeure entre les résultats des recherches et la réalité clinique. Par son aspect interactif, le Web 2.0 peut contribuer à l’application des données probantes en facilitant l’accès et l’échange de connaissances. Objectif : Ce projet de recherche s’inscrit dans une étude visant à élaborer une plateforme informatisée pour les professionnels travaillant avec la clientèle ayant subi un accident vasculaire cérébral (AVC). L’objectif de la présente étude est de décrire la perception des professionnels de la santé face à l’introduction du Web 2.0 dans leur pratique. Méthode : Un devis de recherche qualitatif avec une approche phénoménologique a été utilisé. Des entrevues individuelles semi-structurées ont été menées auprès de 24 professionnels et gestionnaires. Résultats : Les personnes interviewées étaient toutes des femmes avec un âge moyen de 45 ans (± 18). Le transfert des connaissances est l’utilité du Web 2.0 qui émerge des participants comme étant la plus importante. Les répondants ont également exprimé avoir besoin d'une plateforme conviviale. Les résultats soulignent également un paradoxe lié au temps. En effet, les répondants estiment que le Web 2.0 pourrait leur permettre de sauver du temps, cependant ils affirment qu'ils n'auront pas le temps de l'utiliser. Conclusion : Bien que le Web 2.0 demeure un outil de transfert de connaissances peu intégré dans la pratique, les professionnels travaillant avec la clientèle AVC perçoivent généralement positivement son introduction dans leur pratique.

Statistical evaluation of texture analysis from the biocrystallization method

The consumers are becoming more concerned about food quality, especially regarding how, when and where the foods are produced (Haglund et al., 1999; Kahl et al., 2004; Alföldi, et al., 2006). Therefore, during recent years there has been a growing interest in the methods for food quality assessment, especially in the picture-development methods as a complement to traditional chemical analysis of single compounds (Kahl et al., 2006). The biocrystallization as one of the picture-developing method is based on the crystallographic phenomenon that when crystallizing aqueous solutions of dihydrate CuCl2 with adding of organic solutions, originating, e.g., from crop samples, biocrystallograms are generated with reproducible crystal patterns (Kleber & Steinike-Hartung, 1959). Its output is a crystal pattern on glass plates from which different variables (numbers) can be calculated by using image analysis. However, there is a lack of a standardized evaluation method to quantify the morphological features of the biocrystallogram image. Therefore, the main sakes of this research are (1) to optimize an existing statistical model in order to describe all the effects that contribute to the experiment, (2) to investigate the effect of image parameters on the texture analysis of the biocrystallogram images, i.e., region of interest (ROI), color transformation and histogram matching on samples from the project 020E170/F financed by the Federal Ministry of Food, Agriculture and Consumer Protection(BMELV).The samples are wheat and carrots from controlled field and farm trials, (3) to consider the strongest effect of texture parameter with the visual evaluation criteria that have been developed by a group of researcher (University of Kassel, Germany; Louis Bolk Institute (LBI), Netherlands and Biodynamic Research Association Denmark (BRAD), Denmark) in order to clarify how the relation of the texture parameter and visual characteristics on an image is. The refined statistical model was accomplished by using a lme model with repeated measurements via crossed effects, programmed in R (version 2.1.0). The validity of the F and P values is checked against the SAS program. While getting from the ANOVA the same F values, the P values are bigger in R because of the more conservative approach. The refined model is calculating more significant P values. The optimization of the image analysis is dealing with the following parameters: ROI(Region of Interest which is the area around the geometrical center), color transformation (calculation of the 1 dimensional gray level value out of the three dimensional color information of the scanned picture, which is necessary for the texture analysis), histogram matching (normalization of the histogram of the picture to enhance the contrast and to minimize the errors from lighting conditions). The samples were wheat from DOC trial with 4 field replicates for the years 2003 and 2005, “market samples”(organic and conventional neighbors with the same variety) for 2004 and 2005, carrot where the samples were obtained from the University of Kassel (2 varieties, 2 nitrogen treatments) for the years 2004, 2005, 2006 and “market samples” of carrot for the years 2004 and 2005. The criterion for the optimization was repeatability of the differentiation of the samples over the different harvest(years). For different samples different ROIs were found, which reflect the different pictures. The best color transformation that shows efficiently differentiation is relied on gray scale, i.e., equal color transformation. The second dimension of the color transformation only appeared in some years for the effect of color wavelength(hue) for carrot treated with different nitrate fertilizer levels. The best histogram matching is the Gaussian distribution. The approach was to find a connection between the variables from textural image analysis with the different visual criteria. The relation between the texture parameters and visual evaluation criteria was limited to the carrot samples, especially, as it could be well differentiated by the texture analysis. It was possible to connect groups of variables of the texture analysis with groups of criteria from the visual evaluation. These selected variables were able to differentiate the samples but not able to classify the samples according to the treatment. Contrarily, in case of visual criteria which describe the picture as a whole there is a classification in 80% of the sample cases possible. Herewith, it clearly can find the limits of the single variable approach of the image analysis (texture analysis).

Lesiones abiertas del plexo braquial con compromiso vascular concomitante. Revisión sistemática de la literatura.

La presente investigación, intenta generar un impacto positivo dentro del ámbito médico-quirúrgico, ya que se espera que la revisión de la literatura genere mayor conocimiento sobre el manejo de las lesiones del plexo braquial con lesión vascular concomitante, ocasionada mediante un trauma abierto por herida causada por arma corto punzante, y con base en esto proponer una guía de manejo que se pueda aplicar en el día a día de todos aquellos especialistas quirúrgicos y no quirúrgicos para el tratamiento de dicha lesión. Es importante resaltar la dificultad metodológica presentada ante la poca validez de los estudios seleccionados, a pesar de que se aplicaron normas estrictas para la selección de los artículos. Las lesiones vasculares y nerviosas concomitantes del miembro superior no solo comprometen la viabilidad de la extremidad sino que además se constituyen en lesiones con secuelas severas desde el punto de vista funcional para el paciente. No se ha establecido un protocolo de manejo de estas lesiones. Los estudios realizados carecen de metodología adecuada de evaluación tanto en el momento de ingreso del paciente a urgencias como en su preoperatorio, postoperario y en las evaluaciones de los resultados funcionales de la extremidad una vez superada la lesión inicial. No hay una evolución consignada en la literatura con respecto al manejo integral de estos pacientes, que nos permita discernir con respecto al momento adecuado de la reparación nervios. El establecimiento de una guía clínica para cirujanos vasculares y cirujanos de mano para el manejo integral de este tipo de lesiones es apremiante. Los costos de tratamiento y rehabilitación de este tipo de pacientes son indiscutiblemente elevados desde todo punto de vista, pero es definitivo que el resultado funcional es mejor cuando se establece un manejo sistemático que incluya el manejo vascular y el manejo de la lesión neurológica de una forma integral.

Manejo de lesiones abiertas del plexo braquial con compromiso vascular concomitante. Revisión sistemática de la literatura

El manejo de las lesiones de plejo braquial ha sido ampliamente discutido e investigado, especialmente en las lesiones cerradas por tracción. Las lesiones abiertas con compromiso vascular, muchas veces comprometen la viabilidad de la extremidad o la vida del paciente; son de difícil manejo con prioridades distintas, tiempos de establecimiento de los procedimientos que varían respecto a los hallazgos con resultados funcionales pobres por el diagnostico tardío de la lesión nerviosa. Se plantean interrogantes desde el punto de vista vascular y de la lesión nerviosa. se realiza una revisión sistemática de la literatura, encontrando puntos importantes con respecto a la exploración, el momento de la reparación nerviosa pero sin establecer resultados funcionales claros ante la deficiencia metodológica de los estudios encontrados.

Remesas y desarrollo económico. Un análisis empírico del caso mexicano

El objetivo de este trabajo es contribuir a identificar el efecto de las remesas que envían los emigrantes a sus comunidades de origen en México. Del mismo modo, se estudia el efecto que la participación de la mujer tiene en este proceso. La fuente de información es el Consejo Nacional de Población de México CONAPO y contiene variables a nivel estatal y municipal para el año 2000. La base de datos contiene índices de desarrollo humano, intensidad migratoria y remesas para los 2443 municipios mexicanos. La evidencia empírica sugiere que las remesas tienen un impacto positivo sobre los niveles de desarrollo de las comunidades receptoras. No obstante, la relación entre remesas y desarrollo es no lineal. Adicionalmente, se en contró que el efecto positivo que tienen las remesas sobre el desarrollo es más alto cuando la cabeza de familia de los hogares receptores es mujer.

The analysis of ranked observations of soil structure using indicator geostatistics

Structure is an important physical feature of the soil that is associated with water movement, the soil atmosphere, microorganism activity and nutrient uptake. A soil without any obvious organisation of its components is known as apedal and this state can have marked effects on several soil processes. Accurate maps of topsoil and subsoil structure are desirable for a wide range of models that aim to predict erosion, solute transport, or flow of water through the soil. Also such maps would be useful to precision farmers when deciding how to apply nutrients and pesticides in a site-specific way, and to target subsoiling and soil structure stabilization procedures. Typically, soil structure is inferred from bulk density or penetrometer resistance measurements and more recently from soil resistivity and conductivity surveys. To measure the former is both time-consuming and costly, whereas observations made by the latter methods can be made automatically and swiftly using a vehicle-mounted penetrometer or resistivity and conductivity sensors. The results of each of these methods, however, are affected by other soil properties, in particular moisture content at the time of sampling, texture, and the presence of stones. Traditional methods of observing soil structure identify the type of ped and its degree of development. Methods of ranking such observations from good to poor for different soil textures have been developed. Indicator variograms can be computed for each category or rank of structure and these can be summed to give the sum of indicator variograms (SIV). Observations of the topsoil and subsoil structure were made at four field sites where the soil had developed on different parent materials. The observations were ranked by four methods and indicator and the sum of indicator variograms were computed and modelled for each method of ranking. The individual indicators were then kriged with the parameters of the appropriate indicator variogram model to map the probability of encountering soil with the structure represented by that indicator. The model parameters of the SIVs for each ranking system were used with the data to krige the soil structure classes, and the results are compared with those for the individual indicators. The relations between maps of soil structure and selected wavebands from aerial photographs are examined as basis for planning surveys of soil structure. (C) 2007 Elsevier B.V. All rights reserved.

Technologies for biological containment of GM and Non-GM crops

International Perspective The development of GM technology continues to expand into increasing numbers of crops and conferred traits. Inevitably, the focus remains on the major field crops of soybean, maize, cotton, oilseed rape and potato with introduced genes conferring herbicide tolerance and/or pest resistance. Although there are comparatively few GM crops that have been commercialised to date, GM versions of 172 plant species have been grown in field trials in 31 countries. European Crops with Containment Issues Of the 20 main crops in the EU there are four for which GM varieties are commercially available (cotton, maize for animal feed and forage, and oilseed rape). Fourteen have GM varieties in field trials (bread wheat, barley, durum wheat, sunflower, oats, potatoes, sugar beet, grapes, alfalfa, olives, field peas, clover, apples, rice) and two have GM varieties still in development (rye, triticale). Many of these crops have hybridisation potential with wild and weedy relatives in the European flora (bread wheat, barley, oilseed rape, durum wheat, oats, sugar beet and grapes), with escapes (sunflower); and all have potential to cross-pollinate fields non-GM crops. Several fodder crops, forestry trees, grasses and ornamentals have varieties in field trials and these too may hybridise with wild relatives in the European flora (alfalfa, clover, lupin, silver birch, sweet chestnut, Norway spruce, Scots pine, poplar, elm, Agrostis canina, A. stolonifera, Festuca arundinacea, Lolium perenne, L. multiflorum, statice and rose). All these crops will require containment strategies to be in place if it is deemed necessary to prevent transgene movement to wild relatives and non-GM crops. Current Containment Strategies A wide variety of GM containment strategies are currently under development, with a particular focus on crops expressing pharmaceutical products. Physical containment in greenhouses and growth rooms is suitable for some crops (tomatoes, lettuce) and for research purposes. Aquatic bioreactors of some non-crop species (algae, moss, and duckweed) expressing pharmaceutical products have been adopted by some biotechnology companies. There are obvious limitations of the scale of physical containment strategies, addressed in part by the development of large underground facilities in the US and Canada. The additional resources required to grow plants underground incurs high costs that in the long term may negate any advantage of GM for commercial productioNatural genetic containment has been adopted by some companies through the selection of either non-food/feed crops (algae, moss, duckweed) as bio-pharming platforms or organisms with no wild relatives present in the local flora (safflower in the Americas). The expression of pharmaceutical products in leafy crops (tobacco, alfalfa, lettuce, spinach) enables growth and harvesting prior to and in the absence of flowering. Transgenically controlled containment strategies range in their approach and degree of development. Plastid transformation is relatively well developed but is not suited to all traits or crops and does not offer complete containment. Male sterility is well developed across a range of plants but has limitations in its application for fruit/seed bearing crops. It has been adopted in some commercial lines of oilseed rape despite not preventing escape via seed. Conditional lethality can be used to prevent flowering or seed development following the application of a chemical inducer, but requires 100% induction of the trait and sufficient application of the inducer to all plants. Equally, inducible expression of the GM trait requires equally stringent application conditions. Such a method will contain the trait but will allow the escape of a non-functioning transgene. Seed lethality (‘terminator’ technology) is the only strategy at present that prevents transgene movement via seed, but due to public opinion against the concept it has never been trialled in the field and is no longer under commercial development. Methods to control flowering and fruit development such as apomixis and cleistogamy will prevent crop-to-wild and wild-to-crop pollination, but in nature both of these strategies are complex and leaky. None of the genes controlling these traits have as yet been identified or characterised and therefore have not been transgenically introduced into crop species. Neither of these strategies will prevent transgene escape via seed and any feral apomicts that form are arguably more likely to become invasives. Transgene mitigation reduces the fitness of initial hybrids and so prevents stable introgression of transgenes into wild populations. However, it does not prevent initial formation of hybrids or spread to non-GM crops. Such strategies could be detrimental to wild populations and have not yet been demonstrated in the field. Similarly, auxotrophy prevents persistence of escapes and hybrids containing the transgene in an uncontrolled environment, but does not prevent transgene movement from the crop. Recoverable block of function, intein trans-splicing and transgene excision all use recombinases to modify the transgene in planta either to induce expression or to prevent it. All require optimal conditions and 100% accuracy to function and none have been tested under field conditions as yet. All will contain the GM trait but all will allow some non-native DNA to escape to wild populations or to non-GM crops. There are particular issues with GM trees and grasses as both are largely undomesticated, wind pollinated and perennial, thus providing many opportunities for hybridisation. Some species of both trees and grass are also capable of vegetative propagation without sexual reproduction. There are additional concerns regarding the weedy nature of many grass species and the long-term stability of GM traits across the life span of trees. Transgene stability and conferred sterility are difficult to trial in trees as most field trials are only conducted during the juvenile phase of tree growth. Bio-pharming of pharmaceutical and industrial compounds in plants Bio-pharming of pharmaceutical and industrial compounds in plants offers an attractive alternative to mammalian-based pharmaceutical and vaccine production. Several plantbased products are already on the market (Prodigene’s avidin, β-glucuronidase, trypsin generated in GM maize; Ventria’s lactoferrin generated in GM rice). Numerous products are in clinical trials (collagen, antibodies against tooth decay and non-Hodgkin’s lymphoma from tobacco; human gastric lipase, therapeutic enzymes, dietary supplements from maize; Hepatitis B and Norwalk virus vaccines from potato; rabies vaccines from spinach; dietary supplements from Arabidopsis). The initial production platforms for plant-based pharmaceuticals were selected from conventional crops, largely because an established knowledge base already existed. Tobacco and other leafy crops such as alfalfa, lettuce and spinach are widely used as leaves can be harvested and no flowering is required. Many of these crops can be grown in contained greenhouses. Potato is also widely used and can also be grown in contained conditions. The introduction of morphological markers may aid in the recognition and traceability of crops expressing pharmaceutical products. Plant cells or plant parts may be transformed and maintained in culture to produce recombinant products in a contained environment. Plant cells in suspension or in vitro, roots, root cells and guttation fluid from leaves may be engineered to secrete proteins that may be harvested in a continuous, non-destructive manner. Most strategies in this category remain developmental and have not been commercially adopted at present. Transient expression produces GM compounds from non-GM plants via the utilisation of bacterial or viral vectors. These vectors introduce the trait into specific tissues of whole plants or plant parts, but do not insert them into the heritable genome. There are some limitations of scale and the field release of such crops will require the regulation of the vector. However, several companies have several transiently expressed products in clinical and pre-clinical trials from crops raised in physical containment.

Estudo de polimorfismos em genes relacionados ao metabolismo do ácido fólico e sua associação com o desenvolvimento de fendas orais não-sindrômicas

The congenital facial clefts are characterized by incomplete formation of the structures that separate the oral and nasal cavity. It is known that several environmental and genetic factors are involved in its development, among these, polymorphisms associated with folic acid metabolism have been investigated. In this sense, the objective was to observe the frequency of polymorphisms C677T and A1298C methylenetetrahydrofolate reductase gene (MTHFR), methionine synthase A2756G of (MTR), A66G of methionine synthase reductase (MTRR) A80G and the reduced folate carrier (RFC1) in patients with non-syndromic oral clefts, trying to match them with their development. Methods: We studied 140 patients with non-syndromic oral clefts and their mothers and 175 control subjects with their mothers, who underwent a questionnaire to obtain family information. Were collecting blood for DNA extraction from patients and their mothers to identify the genotypes of both by PCRRFLP, in addition to carrying out the determination of glucose, AST, ALT and serum creatinine, folic acid and vitamin B12 Serum and plasma homocysteine, and the hemogram. Results: Most patients have cleft lip and palate (55.8%), followed by isolated cleft palate (24.2%) and cleft lip (20%). Regarding gender, 62% of patients were male and 48% female and, after subdivision of the type of screwdriver according to sex was found a prevalence of males in the cracks of the type lip and palate (69 %) and lip (69.2%) and in the case of cleft palate was a female predominance (59%). The average concentration of serum folate in the group of mothers of cleft patients was significantly lower (13.8 ± 2.4 ng / mL) compared with the group of mothers of control subjects (18.8 ± 3.4 ng / mL) This was also observed for the group of cleft children as compared to controls, the dosage of folic acid had a significant difference with values of 15.6 ± 0.6 (ng / mL) and 17.9 ± 0.6 (ng / mL), respectively. For the biochemical measurements of glucose, AST, ALT and creatinine were not statistically different, nor was observed for haematological parameters performed. In assessing the frequency of polymorphisms C677T and A1298C MTHFR, A2756G MTR, MTRR A66G and A80G of the RFC1 there was no statistically significant difference in genotype distribution between cases and controls both for mothers and in the cleft. Conclusion: Although not observed association of polymorphisms with the development of cracks, the decrease in serum folate in the group of cleft patients and their mothers may reflect a disturbance in the metabolism of this metabolite, necessitating further studies such as studies methylation and expression to further elucidate the involvement of folate in the development of oral clefts

Effects of exposure to cigarette smoke prior to pregnancy in diabetic rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)