Value creation in intelligent packaging value chains

The goal of this thesis is to look for and point out problems and bottlenecks related to value chains and networks in initiation and implementation of intelligent packaging. The research is based on interviews in different case companies and is qualitative by nature. The interview results are examined through a framework built upon relevant theory, with the aim to present a useful recommendation for a supplier company for advancing intelligent packaging business. The perspective that is attained through the research questions demonstrates the potential customer companies’ views of possibilities and problems. The key results suggest that intellectual property of relevant products is in an important position from the customers’ perspective. If the supplier does not own a product technology, a sufficiently large company can consider working as an integrator in a network where smaller companies make use of a compiled offering from other smaller actors. The foundation for these networks and company relationships is value creation, which has to be based on profound customer knowledge and research. The framework that is created for this study builds upon earlier research to provide a model that better serves intelligent packaging implementation and includes the notion of importance of value proposition and continuous value co-creation.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.

Dissection du programme développemental du noyau paraventriculaire de l'hypothalamus.

Une cascade de facteurs de transcription composée de SIM1, ARNT2, OTP, BRN2 et SIM2 est requise pour la différenciation des cinq types cellulaires qui peuplent le noyau paraventriculaire (PVN) de l’hypothalamus, un régulateur critique de plusieurs processus physiologiques essentiels à la survie. De plus, l’haploinsuffisance de Sim1 est aussi une cause d’hyperphagie isolée chez la souris et chez l’homme. Nous désirons disséquer le programme développemental du PVN, via une approche intégrative, afin d’identifier de nouveaux gènes qui ont le potentiel de réguler l’homéostasie chez l’individu adulte. Premièrement, nous avons utilisé une approche incluant l’analyse du transcriptome du PVN à différents stades du développement de la souris pour identifier de tels gènes. Nous avons comparé les transcriptomes de l’hypothalamus antérieur chez des embryons de souris Sim1+/+ et Sim1-/- à E12.5 issus de la même portée. De cette manière, nous avons identifié 56 gènes agissant en aval de Sim1 dont 5 facteurs de transcription - Irx3, Sax1, Rxrg, Ror et Neurod6. Nous avons également proposé un modèle de développement à deux couches de l’hypothalamus antérieur. Selon ce modèle, les gènes qui occupent un domaine médial dans la zone du manteau caractérisent des cellules qui peupleront le PVN alors que les gènes qui ont une expression latérale identifient des cellules qui donneront plus tard naissance aux structures ventrolatérales de l’hypothalamus. Nous avons aussi démontré que Sim1 est impliqué à la fois dans la différenciation, la migration et la prolifération des neurones qui peuplent le PVN tout comme Otp. Nous avons également isolé par microdissection au laser le PVN et l’hypothalamus médiobasal chez des souris de type sauvage à E14.5 pour en comparer les transcriptomes. Ceci nous a permis d’identifier 34 facteurs de transcription spécifiques au PVN et 76 facteurs spécifiques à l’hypothalamus médiobasal. Ces gènes représentent des régulateurs potentiels du développement hypothalamique. Deuxièmement, nous avons identifié 3 blocs de séquences au sein de la région 5’ d’Otp qui sont conservés chez l’homme, la souris et le poisson. Nous avons construit un transgène qui est composé d’un fragment de 7 kb contenant ces blocs de séquences et d’un gène rapporteur. L’analyse de 4 lignées de souris a montré que ce transgène est uniquement exprimé dans le PVN en développement. Nous avons généré un deuxième transgène dans lequel le fragment de 7 kb est inséré en amont de l’ADNc de Brn2 ou Sim1 et de Gfp. Nous avons obtenu quatre lignées de souris dans lesquels le profil d’expression de Brn2 et de Gfp reproduit celui d’Otp. Nous étudierons le développement du PVN et la prise alimentaire chez ces souris. En parallèle, nous croisons ces lignées avec les souris déficientes en Sim1 pour déterminer si l’expression de Brn2 permet le développement des cellules du PVN en absence de Sim1. En résumé, nous avons généré le premier transgène qui est exprimé spécifiquement dans le PVN. Ce transgène constitue un outil critique pour la dissection du programme développemental de l’hypothalamus. Troisièmement, nous avons caractérisé le développement de l’hypothalamus antérieur chez l’embryon de poulet qui représente un modèle intéressant pour réaliser des études de perte et de gain de fonction au cours du développement de cette structure. Il faut souligner que le modèle de développement à deux couches de l’hypothalamus antérieur semble être conservé chez l’embryon de poulet où il est aussi possible de classer les gènes selon leur profil d’expression médio-latéral et le devenir des régions qu’ils définissent. Finalement, nous croyons que cette approche intégrative nous permettra d’identifier et de caractériser des régulateurs du développement du PVN qui pourront potentiellement être associés à des pathologies chez l’adulte telles que l’obésité ou l’hypertension.

Le vieillissement au travail chez les infirmières et le personnel soignant d’expérience auprès de personnes en perte d’autonomie : activités professionnelles et cadres bureaucratiques en transformation

Cette thèse cherche à comprendre comment les transformations bureaucratiques influencent l’activité professionnelle des infirmières et du personnel soignant d’expérience dans le domaine des soins aux personnes âgées en perte d’autonomie depuis les années 90 au Québec. Elle s’inscrit dans une profonde remise en question de l’État-providence, de sa régulation hiérarchique, de son rapport avec le marché privé, et particulièrement des agences privées de placement du personnel. Prenant en compte le déploiement inégal des changements imposés de façon top down et promus par des considérations économiques visant une plus grande « performance » des services publics, plus près du milieu de vie de la personne, notre démarche tient aussi compte de la dimension relationnelle propre au travail infirmier, qui s’illustre par des formes différenciées tenant compte des modèles de pratique préconisés. Notre démarche s’attarde finalement aux rapports entre l’activité professionnelle et la prise de la retraite. À travers l’exploration du nouveau rôle attendu de l’infirmière, dont les habiletés de « chef » ou de « gestion d’équipe de travail » sont sollicitées à titre d’« intervenante pivot » ou de « gestionnaire de cas », et de la place importante qu’occupe la notion de compétences relationnelles dans la prescription de nouvelles modalités des services, plus près des besoins spécifiques de la personne, les données empiriques se présentent sous la forme d’un tableau hétérogène qui montre que ce ne sont pas toutes les infirmières qui souscrivent à ce type de pratique professionnelle. Leur âge, expérience et trajectoire professionnelle, le poste occupé ou encore le milieu de pratique influenceront le rapport entre leurs activités professionnelles et le cadre bureaucratique en transformation. La base empirique de la recherche est constituée d’une collecte de données réalisée entre janvier 2003 et juillet 2006 et qui comprend 9 entrevues exploratoires, 7 entrevues semi-dirigées auprès de retraité-e-s, infirmières, infirmières auxiliaires, 17 réunions incluant majoritairement des membres de la direction d’établissements, ainsi que des syndicats, 21 observations directes avec des infirmières, infirmières auxiliaires, préposées aux bénéficiaires et auxiliaires familiales et sociales, la passation de 112 questionnaires auprès de ces différentes catégories professionnelles, et 7 entrevues semi-dirigées complémentaires, réparties dans 4 établissements différents, sur deux territoires. Quatre grands constats ressortent de notre matériel empirique. Premièrement, la dimension relationnelle au sein des activités professionnelles du personnel soignant d’expérience ainsi que sa perception en ce qui concerne les compétences et l’âge présentent des formes contrastées, voire opposées. Si certains membres du personnel soignant estiment que les interactions professionnelles se sont considérablement réduites à la suite des transformations des dernières années et que la compétence n’est pas reliée à l’âge des professionnelles, les observations directes indiquent, au contraire, un rapport étroit entre ces deux derniers éléments qui s’illustre à travers de riches relations interpersonnelles. Les données quantitatives montrent, quant à elles, qu’une écrasante majorité de répondantes estiment que les compétences associées à leurs fonctions sont reconnues par l’organisation (89,3%), probablement sous l’angle de la conformité aux descriptions de travail, et qu’elles bénéficient d’une marge d’autonomie dans leur travail (83%). Deuxièmement, des résultats s’opposent également en ce qui concerne l’influence du cadre bureaucratique sur les « capacités » ou l’« intérêt » des infirmières d’expérience à maintenir un lien à l’emploi à la date d’éligibilité à la retraite. La majorité des répondantes s’estiment « incapables » de conserver un tel lien alors qu’une minorité d’entre elles exprime un intérêt face au nouveau rôle souhaité chez l’infirmière. Quantitativement, la prise de la retraite à bas âge est toutefois marquante, surtout pour celles qui occupent une fonction et possèdent une rémunération élevée (ex. cadres). Troisièmement, des contrastes apparaissent aussi en ce qui concerne les formes que prennent les rivalités entre les infirmières d’expérience et d’autres catégories professionnelles ainsi que dans les rapports intergénérationnels. Même si les trois quarts (76,2%) des répondantes d’expérience estiment que la répartition du travail devrait être le fruit d’une discussion entre elles et les plus jeunes, et non une imposition de la direction, près de la totalité (92,6%) veulent garder leurs acquis sociaux même si elles savent que la prochaine génération de travailleuses n’aura pas les mêmes avantages. Leur rapport face aux professionnelles d’agences privées de placement est également paradoxal. Huit répondantes sur dix (78,6%) perçoivent le fait que l’établissement recourt aux agences de placement contribue à alourdir leur travail, alors qu’une partie envisage de poursuivre leur activité professionnelle après leur date d’éligibilité à la retraite, par l’intermédiaire de ces mêmes agences. Finalement, il ressort de ce portrait hétérogène que la confrontation des changements du cadre bureaucratique sur l’activité professionnelle se manifestera différemment selon la vision paradigmatique qu’aura le personnel soignant de sa pratique. Les résultats quantitatifs et qualitatifs soulignent que ce paradigme sera influencé par trois dimensions : le territoire de pratique, le type d’établissement de services et l’unité spécifique de travail. Le style de gestion (traditionnel ou intégrateur) influencera également l’impact de ces changements. L’analyse et l’interprétation de l’influence différenciée des transformations bureaucratiques sur l’activité professionnelle s’illustrent par la manifestation de rapports plus conflictuels avec les autorités administrative et professionnelle, ainsi que dans les relations interprofessionnelles. Ces conflits ont émergé lors du passage d’un cadre bureaucratique historiquement construit sur un modèle médical (cure) qui considère la personne comme un « malade chronique » et associé à un style de gestion traditionnel, voire autoritaire, surtout dans certains CHSLD, à une approche « milieu de vie » privilégiant un modèle d’accompagnement (care) favorisant des services associés aux besoins spécifiques de la personne en perte d’autonomie, à titre de « partenaire actif ». Le style de gestion intégrateur de ce dernier modèle rapproche les domaines administratif et de soins de santé, approche que nous retrouvons davantage, mais non exclusivement, dans le cadre de soins à domicile. Une des conclusions majeures de cette thèse est la possibilité d’« enrichir les qualifications de base » (Le Boterf, 2005) des professionnelles lorsque le cadre bureaucratique et le style de gestion institués tendent vers un modèle care/intégrateur, ce qui constitue une forme de « compromis social » (Oiry, 2004). La « surutilisation » des effectifs (O’Brian-Pallas et al., 2005) qui en résulte peut expliquer, en partie, l’incontournable force d’attraction vers la retraite, dès la date d’admissibilité, du personnel soignant, quitte à ce qu’il poursuive ensuite ses activités professionnelles, selon des exigences personnelles, par le biais d’agences privées de placement. Les « fissures » (Laville, 2005) de la frontière entre les services publics et ceux du marché privé ne peuvent alors que s’accentuer, surtout lorsqu’on constate que le cinquième des effectifs, soit 14, 000 infirmières de 55 ans et plus, est potentiellement admissible à la retraite dès maintenant (OIIQ, 2008a).

Exploration des conceptions de la performance privilégiées par des infirmières et des membres de l’équipe d’encadrement impliqués dans l’offre de services infirmiers : une étude qualitative exploratoire

Problématique : Les organisations de santé font face à des pressions diverses pour offrir des soins et des services qui répondent aux plus hauts critères de performance et rendre compte de cette performance. Ces pressions proviennent de différents acteurs tels que les usagers du système de santé et les décideurs politiques. En raison de la place importante que prennent les infirmières dans l’offre de services de santé, il existe un intérêt croissant pour la mise en place d’interventions visant à mesurer et à améliorer la performance des services infirmiers. Cependant, dans le cadre de ces processus, les organisations sont souvent confrontées à des visions différentes et conflictuelles de la performance et à diverses approches pour la mesurer. Objectifs : Cette étude qualitative exploratoire a pour but d’explorer les conceptions de la performance des membres de l’équipe d’encadrement impliqués dans la prestation des services infirmiers et des infirmières soignantes et d’examiner dans quelle mesure les conceptions de la performance des deux groupes d’acteurs correspondent ou entrent en conflit. Méthodologie : Des entrevues semi-dirigées ont été conduites auprès de cinq membres de l’équipe d’encadrement et de trois infirmières. Une analyse de contenu a été effectuée à la fois pour faire ressortir l’éventail des conceptions et celles qui sont les plus prépondérantes dans les discours. Le cadre de référence ayant guidé cette analyse est une adaptation du modèle conceptuel de Donabedian comprenant trois dimensions soit la structure, le processus et les résultats (Unruh & Wan, 2004). Résultats : L’analyse des données recueillies auprès des membres de l’équipe d’encadrement fait ressortir dix conceptions distinctes, mais interreliées de la performance qui mettent l’accent sur les éléments de processus de soins infirmiers et de résultats chez la clientèle. Concernant les infirmières, neuf conceptions ont été répertoriées et l’accent a été porté surtout sur les éléments concernant l’adéquation des ressources humaines infirmières et de processus de soins infirmiers. Certaines similitudes et différences ont été repérées entre les conceptions de ces deux groupes d’acteurs. Conclusion : Cette étude permet de mieux comprendre les conceptions de la performance des acteurs impliqués dans l’offre de services infirmiers. Le modèle intégrateur qui résulte de la combinaison de ces différentes conceptions offre un cadre utile pour guider la construction d’outils de mesure de performance directement en lien avec les soins infirmiers et répondre à la demande d’imputabilité par rapport à ces services.

Étude du rôle de la phosphorylation du complexe Mre11-Rad50-Xrs2 dans le maintien de l'intégrité génomique

L'ADN de chaque cellule est constamment soumis à des stress pouvant compromettre son intégrité. Les bris double-brins sont probablement les dommages les plus nocifs pour la cellule et peuvent être des sources de réarrangements chromosomiques majeurs et mener au cancer s’ils sont mal réparés. La recombinaison homologue et la jonction d’extrémités non-homologues (JENH) sont deux voies fondamentalement différentes utilisées pour réparer ce type de dommage. Or, les mécanismes régulant le choix entre ces deux voies pour la réparation des bris double-brins demeurent nébuleux. Le complexe Mre11-Rad50-Xrs2 (MRX) est le premier acteur à être recruté à ce type de bris où il contribue à la réparation par recombinaison homologue ou JENH. À l’intersection de ces deux voies, il est donc idéalement placé pour orienter le choix de réparation. Ce mémoire met en lumière deux systèmes distincts de phosphorylation du complexe MRX régulant spécifiquement le JENH. L’un dépend de la progression du cycle cellulaire et inhibe le JENH, tandis que l’autre requiert la présence de dommages à l’ADN et est nécessaire au JENH. Ensembles, nos résultats suggèrent que le complexe MRX intègre différents phospho-stimuli pour réguler le choix de la voie de réparation.

Polyphase Implementation of Non-recursive Comb Decimators for Sigma-Delta A/D Converters

In a sigma-delta analog to digital (A/D) As most of the sigma-delta ADC applications require converter, the most computationally intensive block is decimation filters with linear phase characteristics, the decimation filter and its hardware implementation symmetric Finite Impulse Response (FIR) filters are may require millions of transistors. Since these widely used for implementation. But the number of FIR converters are now targeted for a portable application, filter coefficients will be quite large for implementing a a hardware efficient design is an implicit requirement. narrow band decimation filter. Implementing decimation In this effect, this paper presents a computationally filter in several stages reduces the total number of filter efficient polyphase implementation of non-recursive coefficients, and hence reduces the hardware complexity cascaded integrator comb (CIC) decimators for and power consumption [2]. Sigma-Delta Converters (SDCs). The SDCs are The first stage of decimation filter can be operating at high oversampling frequencies and hence implemented very efficiently using a cascade of integrators require large sampling rate conversions. The filtering and comb filters which do not require multiplication or and rate reduction are performed in several stages to coefficient storage. The remaining filtering is performed reduce hardware complexity and power dissipation. either in single stage or in two stages with more complex The CIC filters are widely adopted as the first stage of FIR or infinite impulse response (IIR) filters according to decimation due to its multiplier free structure. In this the requirements. The amount of passband aliasing or research, the performance of polyphase structure is imaging error can be brought within prescribed bounds by compared with the CICs using recursive and increasing the number of stages in the CIC filter. The non-recursive algorithms in terms of power, speed and width of the passband and the frequency characteristics area. This polyphase implementation offers high speed outside the passband are severely limited. So, CIC filters operation and low power consumption. The polyphase are used to make the transition between high and low implementation of 4th order CIC filter with a sampling rates. Conventional filters operating at low decimation factor of '64' and input word length of sampling rate are used to attain the required transition '4-bits' offers about 70% and 37% of power saving bandwidth and stopband attenuation. compared to the corresponding recursive and Several papers are available in literature that deals non-recursive implementations respectively. The same with different implementations of decimation filter polyphase CIC filter can operate about 7 times faster architecture for sigma-delta ADCs. Hogenauer has than the recursive and about 3.7 times faster than the described the design procedures for decimation and non-recursive CIC filters.

A study on the performance of flexible pavements on mature soil subgrades

The country has witnessed tremendous increase in the vehicle population and increased axle loading pattern during the last decade, leaving its road network overstressed and leading to premature failure. The type of deterioration present in the pavement should be considered for determining whether it has a functional or structural deficiency, so that appropriate overlay type and design can be developed. Structural failure arises from the conditions that adversely affect the load carrying capability of the pavement structure. Inadequate thickness, cracking, distortion and disintegration cause structural deficiency. Functional deficiency arises when the pavement does not provide a smooth riding surface and comfort to the user. This can be due to poor surface friction and texture, hydro planning and splash from wheel path, rutting and excess surface distortion such as potholes, corrugation, faulting, blow up, settlement, heaves etc. Functional condition determines the level of service provided by the facility to its users at a particular time and also the Vehicle Operating Costs (VOC), thus influencing the national economy. Prediction of the pavement deterioration is helpful to assess the remaining effective service life (RSL) of the pavement structure on the basis of reduction in performance levels, and apply various alternative designs and rehabilitation strategies with a long range funding requirement for pavement preservation. In addition, they can predict the impact of treatment on the condition of the sections. The infrastructure prediction models can thus be classified into four groups, namely primary response models, structural performance models, functional performance models and damage models. The factors affecting the deterioration of the roads are very complex in nature and vary from place to place. Hence there is need to have a thorough study of the deterioration mechanism under varied climatic zones and soil conditions before arriving at a definite strategy of road improvement. Realizing the need for a detailed study involving all types of roads in the state with varying traffic and soil conditions, the present study has been attempted. This study attempts to identify the parameters that affect the performance of roads and to develop performance models suitable to Kerala conditions. A critical review of the various factors that contribute to the pavement performance has been presented based on the data collected from selected road stretches and also from five corporations of Kerala. These roads represent the urban conditions as well as National Highways, State Highways and Major District Roads in the sub urban and rural conditions. This research work is a pursuit towards a study of the road condition of Kerala with respect to varying soil, traffic and climatic conditions, periodic performance evaluation of selected roads of representative types and development of distress prediction models for roads of Kerala. In order to achieve this aim, the study is focused into 2 parts. The first part deals with the study of the pavement condition and subgrade soil properties of urban roads distributed in 5 Corporations of Kerala; namely Thiruvananthapuram, Kollam, Kochi, Thrissur and Kozhikode. From selected 44 roads, 68 homogeneous sections were studied. The data collected on the functional and structural condition of the surface include pavement distress in terms of cracks, potholes, rutting, raveling and pothole patching. The structural strength of the pavement was measured as rebound deflection using Benkelman Beam deflection studies. In order to collect the details of the pavement layers and find out the subgrade soil properties, trial pits were dug and the in-situ field density was found using the Sand Replacement Method. Laboratory investigations were carried out to find out the subgrade soil properties, soil classification, Atterberg limits, Optimum Moisture Content, Field Moisture Content and 4 days soaked CBR. The relative compaction in the field was also determined. The traffic details were also collected by conducting traffic volume count survey and axle load survey. From the data thus collected, the strength of the pavement was calculated which is a function of the layer coefficient and thickness and is represented as Structural Number (SN). This was further related to the CBR value of the soil and the Modified Structural Number (MSN) was found out. The condition of the pavement was represented in terms of the Pavement Condition Index (PCI) which is a function of the distress of the surface at the time of the investigation and calculated in the present study using deduct value method developed by U S Army Corps of Engineers. The influence of subgrade soil type and pavement condition on the relationship between MSN and rebound deflection was studied using appropriate plots for predominant types of soil and for classified value of Pavement Condition Index. The relationship will be helpful for practicing engineers to design the overlay thickness required for the pavement, without conducting the BBD test. Regression analysis using SPSS was done with various trials to find out the best fit relationship between the rebound deflection and CBR, and other soil properties for Gravel, Sand, Silt & Clay fractions. The second part of the study deals with periodic performance evaluation of selected road stretches representing National Highway (NH), State Highway (SH) and Major District Road (MDR), located in different geographical conditions and with varying traffic. 8 road sections divided into 15 homogeneous sections were selected for the study and 6 sets of continuous periodic data were collected. The periodic data collected include the functional and structural condition in terms of distress (pothole, pothole patch, cracks, rutting and raveling), skid resistance using a portable skid resistance pendulum, surface unevenness using Bump Integrator, texture depth using sand patch method and rebound deflection using Benkelman Beam. Baseline data of the study stretches were collected as one time data. Pavement history was obtained as secondary data. Pavement drainage characteristics were collected in terms of camber or cross slope using camber board (slope meter) for the carriage way and shoulders, availability of longitudinal side drain, presence of valley, terrain condition, soil moisture content, water table data, High Flood Level, rainfall data, land use and cross slope of the adjoining land. These data were used for finding out the drainage condition of the study stretches. Traffic studies were conducted, including classified volume count and axle load studies. From the field data thus collected, the progression of each parameter was plotted for all the study roads; and validated for their accuracy. Structural Number (SN) and Modified Structural Number (MSN) were calculated for the study stretches. Progression of the deflection, distress, unevenness, skid resistance and macro texture of the study roads were evaluated. Since the deterioration of the pavement is a complex phenomena contributed by all the above factors, pavement deterioration models were developed as non linear regression models, using SPSS with the periodic data collected for all the above road stretches. General models were developed for cracking progression, raveling progression, pothole progression and roughness progression using SPSS. A model for construction quality was also developed. Calibration of HDM–4 pavement deterioration models for local conditions was done using the data for Cracking, Raveling, Pothole and Roughness. Validation was done using the data collected in 2013. The application of HDM-4 to compare different maintenance and rehabilitation options were studied considering the deterioration parameters like cracking, pothole and raveling. The alternatives considered for analysis were base alternative with crack sealing and patching, overlay with 40 mm BC using ordinary bitumen, overlay with 40 mm BC using Natural Rubber Modified Bitumen and an overlay of Ultra Thin White Topping. Economic analysis of these options was done considering the Life Cycle Cost (LCC). The average speed that can be obtained by applying these options were also compared. The results were in favour of Ultra Thin White Topping over flexible pavements. Hence, Design Charts were also plotted for estimation of maximum wheel load stresses for different slab thickness under different soil conditions. The design charts showed the maximum stress for a particular slab thickness and different soil conditions incorporating different k values. These charts can be handy for a design engineer. Fuzzy rule based models developed for site specific conditions were compared with regression models developed using SPSS. The Riding Comfort Index (RCI) was calculated and correlated with unevenness to develop a relationship. Relationships were developed between Skid Number and Macro Texture of the pavement. The effort made through this research work will be helpful to highway engineers in understanding the behaviour of flexible pavements in Kerala conditions and for arriving at suitable maintenance and rehabilitation strategies. Key Words: Flexible Pavements – Performance Evaluation – Urban Roads – NH – SH and other roads – Performance Models – Deflection – Riding Comfort Index – Skid Resistance – Texture Depth – Unevenness – Ultra Thin White Topping

The NAO troposphere–stratosphere connection

Using monthly mean data, daily data, and theoretical arguments, relationships between surface pressure variations associated with the North Atlantic Oscillation (NAO), tropopause height, and the strength of the stratospheric vortex are established. An increase in the NAO index leads to a stronger stratospheric vortex, about 4 days later, as a result of increased equatorward refraction of upward-propagating Rossby waves. At tropopause level the effects of the enhanced NAO index and stratospheric polar vortex are opposite, resulting in a lower tropopause over Iceland and a higher tropopause over the Arctic. The raising of the Arctic tropopause leads to a stretching and spinup of the tropospheric column and is therefore associated with a lowering of the surface pressure near the North Pole. For monthly mean data it is found that a standard deviation increase in the NAO index is associated with a 10% increase in the strength of the stratospheric vortex, as measured by potential vorticity at 500 K. A simple theoretical model predicts that this is associated with about 300-m elevation of the Arctic tropopause, as is observed, and a 5-hPa lowering of the surface pressure at the North Pole. The effects of the spinup of the tropospheric column may project on the NAO pattern so that the stratosphere acts as an integrator of the NAO index.

Simulating global properties of electroencephalograms with minimal random neural networks

The human electroencephalogram (EEG) is globally characterized by a 1/f power spectrum superimposed with certain peaks, whereby the "alpha peak" in a frequency range of 8-14 Hz is the most prominent one for relaxed states of wakefulness. We present simulations of a minimal dynamical network model of leaky integrator neurons attached to the nodes of an evolving directed and weighted random graph (an Erdos-Renyi graph). We derive a model of the dendritic field potential (DFP) for the neurons leading to a simulated EEG that describes the global activity of the network. Depending on the network size, we find an oscillatory transition of the simulated EEG when the network reaches a critical connectivity. This transition, indicated by a suitably defined order parameter, is reflected by a sudden change of the network's topology when super-cycles are formed from merging isolated loops. After the oscillatory transition, the power spectra of simulated EEG time series exhibit a 1/f continuum superimposed with certain peaks. (c) 2007 Elsevier B.V. All rights reserved.

Strategic organization in projects and firms through software integration

As integrated software solutions reshape project delivery, they alter the bases for collaboration and competition across firms in complex industries. This paper synthesises and extends literatures on strategy in project-based industries and digitally-integrated work to understand how project-based firms interact with digital infrastructures for project delivery. Four identified strategies are to: 1) develop and use capabilities to shape the integrated software solutions that are used in projects; 2) co-specialize, developing complementary assets to work repeatedly with a particular integrator firm; 3) retain flexibility by developing and maintaining capabilities in multiple digital technologies and processes; and 4) manage interfaces, translating work into project formats for coordination while hiding proprietary data and capabilities in internal systems. The paper articulates the strategic importance of digital infrastructures for delivery as well as product architectures. It concludes by discussing managerial implications of the identified strategies and areas for further research.

The evolution and heterogeneity of outward foreign direct investment from Latin America

The PhD dissertation investigates the rise of emerging country multinationals (EMNEs), a phenomenon that has opened up a series of research themes and debates. The main debate in this field is the extent to which the theories/frameworks on foreign direct investment (FDI), which have been developed from investigations on multinationals from developed countries, is relevant in explaining outward FDI from EMNEs. This debate is sparked by research suggesting that EMNEs supposedly do not hold the characteristics that are seen as a prerequisite to engaging in FDI. The underlying theme in this PhD is that the field should move away from a one size fit all categorisation of EMNEs, and explore the heterogeneity within EMNEs. Collecting data through various databases, archival articles and annual reports, there was an examination of the internationalisation process of 136 Latin American Multinationals (LAMNEs). The research explores the differences in internationalisation trajectories and global strategies and classifies firms into one of four categories. The four categories that LAMNEs fall into are: Natural-Resource Vertical Integrator, which are firms that are in resource seeking sectors; Accelerated Global, which depict firms that have become global over a very short period of time; Traditional Global, which are EMNEs that have internationalised at the same pace as developed country MNEs and Local Optimisers that only acquire or internationalise to developing countries. The analysis also looks at which decade LAMNEs engaged in FDI, to see if LAMNEs that internationalised during the 1970s and 1980s, during a time when Latin America had a closed economy, was different to LAMNEs that internationalised during the Washington consensus era of the 1990s or to firms that have only just internationalised within the last decade. The findings show that LAMNEs that internationalised before 1990 were more likely to adopt Local Optimiser strategies. However, more LAMNEs that started to internationalise during the 1990s started to adopt Traditional Global strategies, although Local Optimisers were the most prominent strategy. From 2002, there was more prominence of Accelerated Global strategies and a lot more heterogeneity among LAMNEs. Natural-Resource Vertical Integrator LAMNEs, tended to start to internationalisation process during the 1970s/1980s. Despite the rise of EMNEs, and by extension LAMNEs opting to use cross border merger and acquisitions (M&A), there is little research on whether this entry mode has been successful. Contrary to the argument that EMNEs are “internationalising successfully” through this strategy, the findings show that these firms are highly geared and are running less efficiently against their Western competitors. In comparison, LAMNEs internationalising through a more gradual approach, are outperforming their Western competitors on efficiency and are not highly geared- i.e. do not hold a lot of debt. The conclusion of the thesis is the emphasis of moving away from evaluating firms from their country or region of origin, but rather through the global strategy they are using. This will give a more a robust firm level of analysis, and help develop the understanding of EMNEs and international business theory.

DC Motor Speed Control via Fuzzy / Pole Placement / PI Controller

This report presents a new way of control engineering. Dc motor speed controlled by three controllers PID, pole placement and Fuzzy controller and discusses the advantages and disadvantages of each controller for different conditions under loaded and unloaded scenarios using software Matlab. The brushless series wound Dc motor is very popular in industrial application and control systems because of the high torque density, high efficiency and small size. First suitable equations are developed for DC motor. PID controller is developed and tuned in order to get faster step response. The simulation results of PID controller provide very good results and the controller is further tuned in order to decrease its overshoot error which is common in PID controllers. Further it is purposed that in industrial environment these controllers are better than others controllers as PID controllers are easy to tuned and cheap. Pole placement controller is the best example of control engineering. An addition of integrator reduced the noise disturbances in pole placement controller and this makes it a good choice for industrial applications. The fuzzy controller is introduce with a DC chopper to make the DC motor speed control smooth and almost no steady state error is observed. Another advantage is achieved in fuzzy controller that the simulations of three different controllers are compared and concluded from the results that Fuzzy controller outperforms to PID controller in terms of steady state error and smooth step response. While Pole placement controller have no comparison in terms of controls because designer can change the step response according to nature of control systems, so this controller provide wide range of control over a system. Poles location change the step response in a sense that if poles are near to origin then step response of motor is fast. Finally a GUI of these three controllers are developed which allow the user to select any controller and change its parameters according to the situation.

Gestão estratégica da informação como fator condicionante para a definição e implementação de políticas de defesa e segurança nacional no contexto da Amazônia Legal: o caso SIPAM/SIVAM

The objective of this work is the study of the existing correlations between the strategical use of the information and the joint and implementation of defense politics and national security in the Legal Amazonian. For in such a way, the proposal was developed from the analysis of the systems of protection and monitoring of the Amazonian (SIPAM/SIVAM), where we search to inquire as these systems have contributed for the definition and implantation of these politics. For the Amazonian, with its natural wealth, threats and vulnerabilities, the perspectives of integration, security and national defense and of sustainable development constitute great challenges to be faced, where the efficient use of the technology is a basic reference that must be incorporated in the strategies and public politics in these areas. One is about a strategical project, conceived with vision of future, protection and development of the . The objective SIPAM/SIVAM the defense and the guarantee of the Brazilian sovereignty in the Legal Amazonian, beyond the systematization and accomplishment of the governmental actions in the region, by means of the intensive use of technological apparatus. In turn, they reflect the priority that the Amazon region has in terms of defense and security for the Country, and symbolize the strategy of the State to protect it. The SIPAM/SIVAM if finds in a boarding line in which the guarantee of the national sovereignty also involves the care with the development of the local population, inside of a proposal educative and integrator. Like conclusion we affirm that of the SIPAM/SIVAM creates a new paradigm for the public administration, where the organizations work with a shared set of information, beyond starting to act of integrated form. Thus, when searching permanently the rationalization of efforts and resources, trying an unknown form of institution relationship where infrastructure and products are shared, the SIPAM/SIVAM creates a new premise for the Brazilian public administration and contributes to give a new direction to the development of the Amazonian.

Quebrando as regras: o poder discricionário na linha de frente do programa esportivo-social RIO 2016 um estudo sobre a situação do integrador de núcleo, um verdadeiro "sociological citizen"

Este estudo analisa o indivíduo que atua na linha de frente do RIO 2016, um programa social do Governo do Estado do Rio de Janeiro que opera 800 unidades de atendimento no Estado, com gestão da Secretaria de Estado de Esporte e Lazer. O indivíduo analisado nesta pesquisa é denominado Integrador de Núcleo Esportivo e é o responsável pela gestão de uma dessas unidades — Núcleo Esportivo — que atende em média 50 alunos de uma comunidade carente no Estado do Rio de Janeiro. Essa pesquisa analisa o Integrador de Núcleo Esportivo sob uma perspectiva inédita, entendendo-o como um agente que atua além do seu escopo burocrático de trabalho. Para esse estudo foram consideradas teorias sobre burocracia organizacional, lançando mão da literatura de Michel Crozier ―The Bureaucratic Phenomenon‖ (1964), que analisa as relações entre pessoas, grupos e poder para entender a influência da organização burocrática no indivíduo. O termo ―sociological citizen‖,desenvolvido por Silbey (2009), também foi considerado para classificar esse indivíduo que se mostra mais aplicado que outros nos serviço de seu mandato organizacional e legal. Silbey aplica também o termo ―relational regulation‖ para denominar esta forma particular de prática da ―cidadania sociológica‖ (tradução do autor), por meio da qual os agentes ―governam a lacuna existente entre as expectativas regulatórias e o desempenho requerido‖.