Experiencias del uso de plataformas de enseñanza virtual en las enseñanzas técnicas en el curso 2009-2010 en la Universidad de Granada.

Resumen tomado de la publicación

Una experiencia docente sobre el uso de estrategias de enseñanza-aprendizaje de tipo activo en titulaciones técnicas.

Resumen tomado de la publicación

Previsiones para el uso de las técnicas modernas de enseñanza.

Se aborda la necesidad de planificar el empleo de los medios audiovisuales en la enseñanza para cumplir de modo adecuado con los objetivos que se persiguen. Así, se deben prever las dificultades y problemas que se pueden plantear antes, durante y después de su emisión, también, se analizan las principales características que han de reunir los programas de teleenseñanza a nivel técnico, de personal competente, de calidad de los programas y de aulas adecuadas para su recepción.

Propuesta de enseñanza-aprendizaje en áreas técnicas desde un enfoque constructivista con y para el uso de las TIC, en el marco de la educación superior no universitaria Boliviana.

Formar a diferentes generaciones de profesionales titulados en las tecnologías superiores bajo un marco teórico que les proporcione métodos y estrategias para una autoformación y lescapacite en el trabajo con y para las TIC. Crear nuevos entornos de aprendizaje, a partir de corrientes teóricas que permitan instruir profesionales activos, reflexivos, críticos, aptos para enfrentar cualquier tarea, responsable de sí mismo, capaces de autoformarse, lograr aprendizajes significativos, organizar sus actividades, definir sus objetivos, trabajar en equipos interdisciplinarios y evaluar sus resultados. La investigación se divide en cuatro capítulos. El primer capítulo presenta tres de las teorías de la enseñanza-aprendizaje que surgen y se desarrollan bajo el soporte de la Psicología Educativa o Psicología de la Educación. El segundo capítulo presenta una visión global de la de tecnología educativa como disciplina, hacindo un recorrido por la historia, por las distintas concepciones y definiciones formuladas. El tercer capítulo presenta el escenario político, económico, social donde se desenvuelve la educación boliviana. El cuarto y último capítulo presenta una propuesta enseñanza-aprendizaje en áreas técnicas desde un enfoque constructivista con y para el uso de las TIC. Las características socioeconómicas bolivianas constituyen el primer obstáculo en el momento de implementar éste tipo de propuestas, pues las mismas significan una importante inversión económica que los Institutos Tecnológicos Superiores no siempre pueden asumir. Sin embargo, sus particulares objetivos y las nuevas demandas de la sociedad les obligan a preocuparse por formular propuestas para integrar, poco a poco las TIC a sus procesos de enseñanza-aprendizaje en todos los niveles, pues de lo contrario corren peligro de preparar profesionales que no podrán competir en el mercado laboral actual.

Integração de técnicas de SIG e sensoriamento remoto na classificação de imagens digitais através do uso da teoria da evidência

O desenvolvimento de novos, e mais eficientes, métodos de classificação de imagem digitais em Sensoriamento Remoto se constitui em uma importante área que tem chamado a atenção de muitos pesquisadores. Nesta área em particular, um problema que freqüentemente surge para a classificação de imagens digitais provenientes de cenas naturais, é a ocorrência de classes espectrais com resposta espectral muito similar. Nestes casos, os sistemas sensores mais comuns e os métodos tradicionais de classificação de imagem apresentam muito baixa precisão ou mesmo falham completamente. Várias abordagens vem sendo propostas na literatura. Uma das possíveis abordagens consiste em fazer uso de informações auxiliares que possuam poder discriminante para as classes sob análise. Esta é a possibilidade explorada nesta dissertação, utilizar-se de dados auxiliares, provenientes de fontes diversas, tais como: temperatura, precipitação, altitude e classes de solo. Estes dados são então combinados com dados provenientes de imagens multiespectrais de acordo com a Teoria de Evidência proposta por Dempster e Shafer. Esta abordagem é testada usando dados de uma área no Estado do Rio Grande do Sul, Brasil, com a finalidade de delimitar a ocorrência da Mata Nativa com Araucária (composta pela conifera Araucaria angustifolia), que é de difícil separação em relação a outras classes espectrais que ocorrem na região, tornando difícil o processo preciso de classificação.

Biodiesel : uso, limitações e implicações técnicas devido à degradabilidade oxidativa

Este estudo apresenta a condição especial a que estão submetidos os equipamentos que ficam por longos períodos sem funcionar, sobretudo os chamados standby com misturas de biodiesel em seu interior. Mostra que os ensaios de validação para a introdução do biodiesel no Brasil, realizados sob o comando do governo brasileiro, foram basicamente constituídos por testes para acúmulo de quilometragem, como se o universo do diesel se resumisse a caminhões, vans e ônibus. Os equipamentos fora de estrada, em todas as suas formas de apresentação e uso, não foram adequadamente cobertos. O resultado é que um novo combustível foi introduzido no país (mescla de diesel mineral com biodiesel), com característica de degradabilidade muito maior do que o diesel puro. Este trabalho apresenta os parâmetros de qualidade necessários para que um combustível seja considerado adequado; apresenta os efeitos principais da degradação oxidativa; faz um levantamento das melhores práticas recomendadas pelos fabricantes de motores e veículos a diesel no mundo e, finalmente, consulta os fabricantes de sistema de injeção, motores e veículos no Brasil para saber se, em função das condições brasileiras, os fabricantes recomendam ações de prevenção distintas de suas matrizes. Em função dos problemas observados no país, algumas medidas adicionais precisam ser tomadas pelos proprietários de equipamentos a diesel para preservá-los. Dentre as medidas, destacam-se as seguintes: a) a especificação da mistura precisa ser obedecida com rigor; b) sempre que possível, quando o equipamento tiver de ser parado de modo previsível, o combustível deve ser esgotado do tanque; c) quando não for possível esgotar o tanque, o combustível tem de ser usado ou substituído em no máximo 30 dias; d) talvez reintroduzir sob condições especiais o diesel puro. Essa realidade nova que se instaurou com a introdução do biodiesel na matriz energética brasileira não foi devidamente informada à comunidade. Geradores de emergência que não seguem esses cuidados podem ter problemas para funcionar devido à degradação do combustível em seu interior e, pior, pode-se vir a descobrir esse fato apenas no momento da necessidade.

Uso e benefícios das técnicas de planejamento e gestão de tempo em projetos de tecnologia da informação e comunicação

A gestão de projetos provê uma maneira estruturada para que as empresas possam realizar suas iniciativas com uma maior probabilidade de sucesso. Porém, estudos mostram que o nível de falha nos projetos em dimensões básicas como tempo e custo ainda é alto. O objetivo deste trabalho de pesquisa foi identificar se os gerentes de projetos conhecem e utilizam as técnicas de planejamento e gestão de tempo e se estas técnicas podem levar ao sucesso no cumprimento do tempo originalmente planejado. Foi realizada uma pesquisa por meio de administração de formulário com 78 gerentes de projetos de São Paulo, destes foram obtidos 55 formulários completos e foi possível identificar que as técnicas mais conhecidas e utilizadas são do ciclo de vida linear e que, quanto maior o grau de uso destas técnicas, maior a frequência com que os gerentes de projeto atingem sucesso em seus projetos.

Modelo de classificação para pequenas empresas supermercadistas quanto ao uso de técnicas de prevenção de perdas: um estudo de caso

The objective of this work is to draw attention to the importance of use of techniques of loss prevention in small retail organization, analyzing and creating a classification model related to the use of these in companies. This work identifies the fragilities and virtues of companies and classifies them relating the use of techniques of loss prevention. The used methodology is based in a revision of the available literature on measurements and techniques of loss prevention, analyzing the processes that techniques needed to be adopted to reduce losses, approaching the "pillars" of loss prevention, the cycle life of products in retail and cycles of continues improvement in business. Based on the objectives of this work and on the light of researched techniques, was defined the case study, developed from a questionnaire application and the researcher's observation on a net of 16 small supermarkets. From those studies a model of classification of companies was created. The practical implications of this work are useful to point mistakes in retail administration that can become losses, reducing the profitability of companies or even making them impracticable. The academic contribution of this study is a proposal of an unpublished model of classification for small supermarkets based on the use of techniques of loss prevention. As a result of the research, 14 companies were classified as Companies with Minimum Use of Loss Prevention Techniques - CMULPT, and 02 companies were classified as Companies with Deficient Use of Loss Prevention Techniques - CDULPT. The result of the research concludes that on average the group was classified as being Companies with Minimum Use of Techniques of Prevention of Losses EUMTPP, and that the companies should adopt a program of loss prevention focusing in the identification and quantification of losses and in a implantation of a culture of loss prevention

Fatores inibidores do uso de técnicas ambientais nos postos de combustíveis: um estudo de caso em Natal/RN

The objective of this work was to investigate the factors that inhibit the use of Environmental Techniques in the Gas Station of the city of Natal/RN. For this, a survey with the aid of a questionnaire was used like research instrument. It s used a sample for convenience, not probabilistic. For collection of the data, it was used directly application of the questionnaire to the Managers or Assistant managers of the gas station, in accordance with its availability or presence. The data was collected in all the regions of Natal (North, South, East and West). The population in accordance with the data of the ANP of September 2005 is of 111 ranks and the collected sample was of 86. To carry through the analysis of the data of this research had been used softwares Excel and Statistic version 5.0, for Windows. The analysis of data is divided in two parts; descriptive analysis and analysis of groupings (clusters). The results showed that bigger part of the interviewed ones has between 30 and 39 years of age; they have second grade completed; they had declared to have little between and reasonable knowledge how much to the use of Clean Technology (CT) in gas station; and a small part of the interviewed ones had informed to have much knowledge how much the resolutions of the CONAMA established for the Gas Station. Of the searched ranks, the majority is national(76.7%); the most accurate practice environmental used in the gas station are: it collects selective of oil used or contaminated and ecological tanks - coated with strengthened fibre glass; great part of the interviewed ones (33.8%) informed that never the TL makes planning of referring future action; about of the half of the interviewed ones (84.9%) they had more declared that its employees have of none to a reasonable level of training for deal with problems that compromise the environment; the majority of the ranks (72.1%) functions has for more then six years. It is observed that almost all the interviewed ones (96.5%) evaluate as being important or very important the implantation of CT in Gas Station and the great majority (82.1%) evaluates the difficulty in if implanting these technologies in Gas Station as being easy or very easy. In the analysis of cluster, it was verified existence of two groupings (as much in the variable of the barriers and benefits), being that inside of each clusters exists homogeneity and between clusters exists heterogeneity. In reality, everything is important or very important in the opinion of the interviewed ones. There only exists a small significant difference that separates them in clusters

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de Geoprocessamento e Sensoriamento Remoto no levantamento e integração de dados necessários a gestão ambiental dos campos de extração de óleo e gás do Canto do Amaro e Alto da Pedra no município de Mossoró - RN

The objective of this work is to identify, to chart and to explain the evolution of the soil occupation and the envirionment vulnerability of the areas of Canto do Amaro and Alto da Pedra, in the city of Mossoró-RN, having as base analyzes it multiweather of images of orbital remote sensors, the accomplishment of extensive integrated works of field to a Geographic Information System (GIS). With the use of inserted techniques of it analyzes space inserted in a (GIS), and related with the interpretation and analyzes of products that comes from the Remote Sensoriamento (RS.), make possible resulted significant to reach the objectives of this works. Having as support for the management of the information, the data set gotten of the most varied sources and stored in digital environment, it comes to constitute the geographic data base of this research. The previous knowledge of the spectral behavior of the natural or artificial targets, and the use of algorithms of Processing of Digital images (DIP), it facilitates the interpretation task sufficiently and searchs of new information on the spectral level. Use as background these data, was generated a varied thematic cartography was: Maps of Geology, Geomorfológicals Units soils, Vegetation and Use and Occupation of the soil. The crossing in environment SIG, of the above-mentioned maps, generated the maps of Natural and Vulnerability envirionmental of the petroliferous fields of I Canto do Amaro and Alto da Pedra-RN, working in an ambient centered in the management of waters and solid residuos, as well as the analysis of the spatial data, making possible then a more complex analysis of the studied area

Uso da espectroscopia do infravermelho próximo e técnicas multivariadas para diferenciar escherichia coli e salmonella enteritidis inoculadas em polpa de fruta (abacaxi)

Aiming to consumer s safety the presence of pathogenic contaminants in foods must be monitored because they are responsible for foodborne outbreaks that depending on the level of contamination can ultimately cause the death of those who consume them. In industry is necessary that this identification be fast and profitable. This study shows the utility and application of near-infrared (NIR) transflectance spectroscopy as an alternative method for the identification and classification of Escherichia coli and Salmonella Enteritidis in commercial fruit pulp (pineapple). Principal Component Analysis (PCA), Independent Modeling of Class Analogy (SIMCA) and Discriminant Analysis Partial Least Squares (PLS-DA) were used in the analysis. It was not possible to obtain total separation between samples using PCA and SIMCA. The PLS-DA showed good performance in prediction capacity reaching 87.5% for E. coli and 88.3% for S. Enteritides, respectively. The best models were obtained for the PLS-DA with second derivative spectra treated with a sensitivity and specificity of 0.87 and 0.83, respectively. These results suggest that the NIR spectroscopy and PLS-DA can be used to discriminate and detect bacteria in the fruit pulp