Composition and structure variation for magnetron sputtered tantalum oxynitride thin films, as function of deposition parameters

Tantalum oxynitride thin films were produced by magnetron sputtering. The films were deposited usinga pure Ta target and a working atmosphere with a constant N2/O2ratio. The choice of this constant ratiolimits the study concerning the influence of each reactive gas, but allows a deeper understanding of theaspects related to the affinity of Ta to the non-metallic elements and it is economically advantageous.This work begins by analysing the data obtained directly from the film deposition stage, followed bythe analysis of the morphology, composition and structure. For a better understanding regarding theinfluence of the deposition parameters, the analyses are presented by using the following criterion: thefilms were divided into two sets, one of them produced with grounded substrate holder and the otherwith a polarization of −50 V. Each one of these sets was produced with different partial pressure of thereactive gases P(N2+ O2). All the films exhibited a O/N ratio higher than the N/O ratio in the depositionchamber atmosphere. In the case of the films produced with grounded substrate holder, a strong increaseof the O content is observed, associated to the strong decrease of the N content, when P(N2+ O2) is higherthan 0.13 Pa. The higher Ta affinity for O strongly influences the structural evolution of the films. Grazingincidence X-ray diffraction showed that the lower partial pressure films were crystalline, while X-rayreflectivity studies found out that the density of the films depended on the deposition conditions: thehigher the gas pressure, the lower the density. Firstly, a dominant -Ta structure is observed, for lowP(N2+ O2); secondly a fcc-Ta(N,O) structure, for intermediate P(N2+ O2); thirdly, the films are amorphousfor the highest partial pressures. The comparison of the characteristics of both sets of produced TaNxOyfilms are explained, with detail, in the text.

Poly(ester-urethane) scaffolds: effect of structure on properties and osteogenic activity of stem cells

The present study aimed to investigate the effect of structure (design and porosity) on the matrix stiffness and osteogenic activity of stem cells cultured on poly(ester-urethane) (PEU) scaffolds. Different three-dimensional (3D) forms of scaffold were prepared from lysine-based PEU using traditional salt-leaching and advanced bioplotting techniques. The resulting scaffolds were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), mercury porosimetry and mechanical testing. The scaffolds had various pore sizes with different designs, and all were thermally stable up to 300â °C. In vitrotests, carried out using rat bone marrow stem cells (BMSCs) for bone tissue engineering, demonstrated better viability and higher cell proliferation on bioplotted scaffolds compared to salt-leached ones, most probably due to their larger and interconnected pores and stiffer nature, as shown by higher compressive moduli, which were measured by compression testing. Similarly, SEM, von Kossa staining and EDX analyses indicated higher amounts of calcium deposition on bioplotted scaffolds during cell culture. It was concluded that the design with larger interconnected porosity and stiffness has an effect on the osteogenic activity of the stem cells.

Exploring the factor structure of neurocognitive measures in older individuals

Here we focus on factor analysis from a best practices point of view, by investigating the factor structure of neuropsychological tests and using the results obtained to illustrate on choosing a reasonable solution. The sample (n=1051 individuals) was randomly divided into two groups: one for exploratory factor analysis (EFA) and principal component analysis (PCA), to investigate the number of factors underlying the neurocognitive variables; the second to test the "best fit" model via confirmatory factor analysis (CFA). For the exploratory step, three extraction (maximum likelihood, principal axis factoring and principal components) and two rotation (orthogonal and oblique) methods were used. The analysis methodology allowed exploring how different cognitive/psychological tests correlated/discriminated between dimensions, indicating that to capture latent structures in similar sample sizes and measures, with approximately normal data distribution, reflective models with oblimin rotation might prove the most adequate.

Genetic diversity and population structure in Vicia faba L. landraces and wild related species assessed by nuclear SSRs

Research Article

Identification and analysis of functional elements in 1% of the human genome by the ENCODE pilot project.

We report the generation and analysis of functional data from multiple, diverse experiments performed on a targeted 1% of the human genome as part of the pilot phase of the ENCODE Project. These data have been further integrated and augmented by a number of evolutionary and computational analyses. Together, our results advance the collective knowledge about human genome function in several major areas. First, our studies provide convincing evidence that the genome is pervasively transcribed, such that the majority of its bases can be found in primary transcripts, including non-protein-coding transcripts, and those that extensively overlap one another. Second, systematic examination of transcriptional regulation has yielded new understanding about transcription start sites, including their relationship to specific regulatory sequences and features of chromatin accessibility and histone modification. Third, a more sophisticated view of chromatin structure has emerged, including its inter-relationship with DNA replication and transcriptional regulation. Finally, integration of these new sources of information, in particular with respect to mammalian evolution based on inter- and intra-species sequence comparisons, has yielded new mechanistic and evolutionary insights concerning the functional landscape of the human genome. Together, these studies are defining a path for pursuit of a more comprehensive characterization of human genome function.

The TRANSMED Atlas: geological-geophysical fabric of the Mediterranean region - Final report of the project

Geological research on the Mediterranean region is presently characterized by the transition from disciplinary to multidisciplinary research, as well as from national to international investigations. In order to synthesize and integrate the vast disciplinary and national datasets which are available, it is necessary to implement maximum interaction among geoscientists of different backgrounds. The creation of project-oriented task forces in universities and other research institutions, as well as the development of large international cooperation programs, is instrumental in pursuing such a multidisciplinary and supranational approach. The TRANSMED Atlas, an official publication of the 32nd International Geological Congress (Florence 2004), is the result of an international scientific cooperation program which brought together for over two years sixty-three structural geologists, geophysicists, marine geologists, petrologists, sedimentologists, stratigraphers, paleogeographers, and petroleum geologists coming from eighteen countries, and working for the petroleum industry, academia, and other institutions, both public and private. The TRANSMED Atlas provides an updated, synthetic, and coherent portrayal of the overall geological-geophysical structure of the Mediterranean domain and the surrounding areas. The initial stimulus for the Atlas came from the realization of the extremely heterogeneous nature of the existing geological-geophysical data about such domain. These data have been gathered by universities, oil companies, geological surveys and other institutions in several countries, often using different procedures and standards. In addition, much of these data are written in languages and published in outlets that are not readily accessible to the general international reader. By synthesizing and integrating a wealth of preexisting and new data derived from surficial geology, seismic sections at various scales, and mantle tomographies, the TRANSMED Atlas provides for the first time a coherent geological overview of the Mediterranean region and represents an ideal springboard for future studies.

ASIC1a oligomerization structure-function of its extracellular vestibule and functional characterization of αS243Pβɣ ENaC

Quatre cristaux du canal ASIC1a ont été publiés et soutiennent une stoechiométrie trimérique. Cependant, ces données contredisant de précédentes analyses fonctionnelles effectuées sur des canaux de la même famille, notre intérêt fut porté sur l'oligomérisation d'ASIC1a. Dans ce sens, un nouvel essai couplant la méthode d'analyse par substitution de cystéines (SCAM) avec l'utilisation de réactifs sulfhydryls bifonctionnels (crosslinkers) a été mis en place. Le but étant de stabiliser, puis sélectionner les canaux fonctionnels, pour ensuite les séparer selon leur taille par SDS-PAGE. Grâce à cette technique, nous avons démontré que le complexe stabilisé a une taille coïncidant avec une organisation tétramérique. En plus de son oligomérisation, le chemin emprunté par les ions pour traverser le canal n'est pas clairement défini dans ces structures. De ce fait, utilisant une approche électrophysiologique, nous avons étudié le lien entre la structure et la fonction du vestibule extracellulaire d'ASIC1a. Dans ce but, nous nous sommes intéressés l'accessibilité de cystéines spécifiques localisées dans ce vestibule pour des réactifs méthanethiosulfonates (MTS). Ainsi, nous avons pu corréler les cinétiques de modification de ces cystéines par les MTS avec les effets sur le courant sodique, et donc avoir des informations supplémentaires sur la voie empruntée par les ions. De plus, la simulation informatique de liaison de ces réactifs illustre le remplissage total de ce vestibule. Fonctionnellement, cette interaction ne perturbe pas le passage de ions, c'est pourquoi il nous apparaît probable que le vestibule présente une taille plus large que celle illustrée par les cristaux. Dans un deuxième temps, notre intérêt fut porté sur ENaC. Ce canal est composé des trois sous-unités (a, ß et y) et est exprimé dans divers épithéliums, dont les tubules des reins. Il participe à l'homéostasie sodique et est essentiellement régulé par voie hormonale via l'aldostérone et la Vasopressine, mais également par des sérines protéases ou le Na+. Nous avons étudié la répercussion fonctionnelle de la mutation aS243P, découverte chez un nouveau-né prématuré atteint de pseudohypoaldostéronisme de type 1. Cette maladie autosomale récessive se caractérise, généralement, par une hyponatrémie liée à d'importantes pertes de sel dans les urines, une hyperkaliémie, ainsi qu'un niveau élevé d'aldostérone. Tout d'abord aucune des expériences biochimiques et électrophysiologiques n'a pu démontrer un défaut d'expression ou une forte diminution de l'activité soutenant les données cliniques. Cependant, en challengeant aS243PßyENaC avec une forte concentration de Na+ externe, une hypersensibilité de canal fut observée. En effet, ni les phénomènes régulateurs de « feedback inhibition » ou de « Na+ self-inhibition » n'étaient semblables au canal sauvage. De ce fait, ils apparaissaient exacerbés en présence de la mutation, amenant ainsi à une diminution de la réabsorption de Na+. Ceci corrobore entièrement l'hyponatrémie diagnostiquée. Le rein d'un prématuré étant immature, la quantité de Na+ atteignant la partie distale du néphron est plus élevée, du fait que les autres mécanismes de réabsorption en amont ne sont probablement pas encore en place. Cette hypothèse est renforcée par l'existence d'un frère présentant la même mutation, mais qui, né à terme, ne présentait aucun signe d'hyponatrémie. - The main topic of my thesis is the structure-function relationship of the ENaC/Deg family of ion channels, namely the Acid-Sensing Ion Channel ASIC1a and the Epithelial Na Channel ENaC. The primary part of this research is dedicated to the structure of ASIC1a. Four channel crystals have been published, which support a trimeric stoichiometry, although these data contradict previous functional experiments on other ENaC/Deg members. We are therefore interested in ASIC1a oligomerization and have set up a new assay combining the Substituted- Cysteine Accessibility Method (SCAM) with Afunctional sulfhydryl reagents (crosslinkers) allowing its study. The aim was to first stabilize the channels, then select those that are functional and then resolve them according to their size on SDS-PAGE. We demonstrated that the stabilized complex has a molecular weight corresponding to a tetrameric stoichiometry. In addition to our interest in the oligomerization of the ENaC/Deg family of ion channels, we also wanted to investigate the thus far undefined way of permeation for these channels. Therefore, taking the advantage of a more electrophysiological approach, we studied the accessibility of specific cysteines for methanethiosulfonate reagents (MTS) and were able to correlate the MTS association kinetics on cysteine residues with Na+ currents. These results have given us an insight into ion permeation and our functional evidence indicates that the extracellular is larger than that depicted by the crystal structures. As a side project, we focused on ENaC, which is made up of three subunits (a, ß and y) and is expressed in various epithelia, especially in the distal nephron of the kidneys. It plays a role in Na+ homeostasis and is essentially regulated by hormones via aldosterone and vasopressin, but also by serine proteases or Na+. We have studied the functional impact of the aS243P mutation, discovered in a premature baby suffering from pseudohypoaldosteronism of type 1. This autosomal recessive disease is characterized by hyponatremia, hyperkalemia and high aldosterone levels. Firstly, neither biochemical nor electrophysiological experiments indicated an expression defect or a strong decrease in activity. However, challenging aS243PßyENaC with increased external Na+ concentration showed channel hypersensitivity. Indeed, both the "feedback inhibition" and the "Na+ self-inhibition" regulatory mechanisms are impaired, leading to a decrease in Na+ reabsorption, entirely supports the diagnosis. The kidneys in preterm infants are immature and Na+ levels reaching the distal nephron are higher than normally observed. We hypothesize that the upstream reabsorption machinery is unlikely to be sufficiently matured and this assumption is supported by an asymptomatic sibling carrying the same mutation, but born at term. - La cellule, unité fonctionnelle du corps humain, est délimitée par une membrane plasmique servant de barrière biologique entre les milieux intra et extracellulaires. Une communication entre cellules est indispensable pour un fonctionnement adéquat. Sa survie dépend, entre autres, du maintien de la teneur en ions dans chacun des milieux qui doivent pouvoir être réabsorbés, ou sécrétés, selon les besoins. Les protéines insérées dans la membrane forment un canal et sont un moyen de communication permettant spécifiquement à des ions tel que le sodium (Na+) de traverser. Le Na+ se trouve dans la plupart des aliments et le sel, et est spécifiquement réabsorbé au niveau des reins grâce au canal sodique épithélial ENaC. Cette réabsorption se fait de l'urine primaire vers l'intérieur de la cellule, puis est transporté vers le sang. Pour maintenir un équilibre, une régulation de ce canal est nécessaire. En effet, des dysfonctionnements impliquant la régulation ou l'activité d'ENaC lui-même sont à l'origine de maladies telles que la mucoviscidose, l'hypertension ou encore, le pseudohypoaldostéronisme (PHA). Cette maladie est caractérisée, notamment, par d'importantes pertes de sel dans les urines. Des pédiatres ont diagnostiqué un PHA chez un nouveau-né, ce dernier présentant une modification du canal ENaC, nous avons recréé cette protéine afin d'étudier l'impact de ce changement sur son activité. Nous avons démontré que la régulation d'ENaC était effectivement perturbée, conduisant ainsi à une forte réduction de la réabsorption sodique. Afin de développer des molécules capables de moduler l'activité de protéines. Il est nécessaire d'en connaître la structure. Celle du canal sodique sensible à l'acidification ASIC1, un canal cousin d'ENaC, est connue. Ces données structurales contredisant cependant les analyses fonctionnelles, nous nous sommes penchés une nouvelle fois sur ASIC1. Une protéine est une macromolécule biologique composée d'une chaîne d'acides aminés (aa). De l'enchaînement d'aa à la protéine fonctionnelle, quatre niveaux de structuration existent. Chaque aa donne une indication quant au repliement et plus particulièrement la cystéine. Arborant un groupe sulfhydryle (SH) capable de former une liaison spécifique et stable avec un autre SH, celle-ci est souvent impliquée dans la structure tridimensionnelle de la protéine. Ce type de liaison intervient également dans la stabilisation de la structure quaternaire, qui est l'association de plusieurs protéines identiques (homomère), ou pas (hétéromère). Dans cette partie, nous avons remplacé des aa par des cystéines à des endroits spécifiques. Le but était de stabiliser plusieurs homomères d'ASICl ensemble avec des réactifs créant des ponts entre deux SH. Ainsi, nous avons pu déterminer le nombre de protéines ASIC1 participant à la formation d'un canal fonctionnel. Nos résultats corroborent les données fonctionnelles soutenant un canal tétramérique. Nous avons également étudié l'accessibilité de ces nouvelles cystéines afin d'obtenir des informations supplémentaires sur la structure du chemin emprunté par le Na+ à travers ASIC1 et plus particulièrement du vestibule extracellulaire.

Towards a database on societal impact of Mediterranean floods in the framework of the HYMEX project

The NW Mediterranean region experiences every year heavy rainfall and flash floods that occasionally produce catastrophic damages. Less frequent are floods that affect large regions. Although a large number of databases devoted exclusively to floods or considering all kind of natural hazards do exist, usually they only record catastrophic flood events. This paper deals with the new flood database that is being developed within the framework of HYMEX project. Results are focused on four regions representative of the NW sector of Mediterranean Europe: Catalonia, Spain; the Balearic Islands, Spain; Calabria, Italy; and Languedoc-Roussillon, Midi-Pyrenées and PACA, France. The common available 30-yr period starts in 1981 and ends in 2010. The paper shows the database structure and criteria, the comparison with other flood databases, some statistics on spatial and temporal distribution, and an identification of the most important events. The paper also provides a table that includes the date and affected region of all the catastrophic events identified in the regions of study, in order to make this information available for all audiences.

EGASP: the human ENCODE Genome Annotation Assessment Project

Background: Non-long terminal repeat (non-LTR) retrotransposons have contributed to shaping the structure and function of genomes. In silico and experimental approaches have been used to identify the non-LTR elements of the urochordate Ciona intestinalis. Knowledge of the types and abundance of non-LTR elements in urochordates is a key step in understanding their contribution to the structure and function of vertebrate genomes. Results: Consensus elements phylogenetically related to the I, LINE1, LINE2, LOA and R2 elements of the 14 eukaryotic non-LTR clades are described from C. intestinalis. The ascidian elements showed conservation of both the reverse transcriptase coding sequence and the overall structural organization seen in each clade. The apurinic/apyrimidinic endonuclease and nucleic-acid-binding domains encoded upstream of the reverse transcriptase, and the RNase H and the restriction enzyme-like endonuclease motifs encoded downstream of the reverse transcriptase were identified in the corresponding Ciona families. Conclusions: The genome of C. intestinalis harbors representatives of at least five clades of non-LTR retrotransposons. The copy number per haploid genome of each element is low, less than 100, far below the values reported for vertebrate counterparts but within the range for protostomes. Genomic and sequence analysis shows that the ascidian non-LTR elements are unmethylated and flanked by genomic segments with a gene density lower than average for the genome. The analysis provides valuable data for understanding the evolution of early chordate genomes and enlarges the view on the distribution of the non-LTR retrotransposons in eukaryotes.

Stream Stabilization in Western Iowa: Structure Evaluation and Design Manual, HR-385, 1998

Stream degradation is the action of deepening the stream bed and widening the banks due to the increasing velocity of water flow. Degradation is pervasive in channeled streams found within the deep to moderately deep loess regions of the central United States. Of all the streams, however, the most severe and widespread entrenchment occurs in western Iowa streams that are tributaries to the Missouri River. In September 1995 the Iowa Department of Transportation awarded a grant to Golden Hills Resource Conservation and Development, Inc. The purpose of the grant, HR-385 "Stream Stabilization in Western Iowa: Structure Evaluation and Design Manual", was to provide an assessment of the effectiveness and costs of various stabilization structures in controlling erosion on channeled streams. A review of literature, a survey of professionals, field observations and an analysis of the data recorded on fifty-two selected structures led to the conclusions presented in the project's publication, Design Manual, Streambed Degradation and Streambank Widening in Western Iowa. Technical standards and specifications for the design and construction of stream channel stabilization structures are included in the manual. Additional information on non-structural measures, monitoring and evaluation of structures, various permit requirements and further resources are also included. Findings of the research project and use and applications of the Design Manual were presented at two workshops in the Loess Hills region. Participants in these workshops included county engineers, private contractors, state and federal agency personnel, elected officials and others. The Design Manual continues to be available through Golden Hills Resource Conservation and Development.

07008-002 Yellow River Watershed Improvement Project Final Report

Two sections of the Yellow River have been named to the State of Iowa’s 303d list of impaired waters. The listing reflects streams with pollution problems linked to habitat alterations, in addition to those with potential disease causing bacteria, viruses and parasites. This fact, combined with local knowledge of water quality problems, shows the need for land treatment practices and habitat improvement measures. This project would target the Yellow River watershed, which totals approximately 49,800 acres. Areas that drain directly into the Yellow River mainstream will be targeted. Individually, these areas are too small to be considered sub-watersheds. This project will assess the drainage areas for active gullies and prioritize grade stabilization structures based upon severity and impact on the fishery. Funding would be utilized to target high priority grade stabilization structure sites and provide cost-share for those projects. A prerequisite for cost-share allocation is 75% of the land contributing to the drainage area must have some form of treatment in place. The Allamakee SWCD has received an EPA Region 7 Grant toward grade stabilization structures in the same area. Landowners have indicated that 75% cost-share is necessary to implement practices. To meet this request, the EPA funding would be used at a 15% cost-share rate if matched with 60% cost-share from WIRB funding. If matched with Federal EQIP funds, 25% of funds obtained from WIRB would be used. If other funds were depleted, WIRB funds would be utilized for the entire 75% cost-share.

GIS-Based Accident Location and Analysis System (GIS-ALAS) Project Report: Phase 1, 1998

This report summarizes progress made in Phase 1 of the GIS-based Accident Location and Analysis System (GIS-ALAS) project. The GIS-ALAS project builds on several longstanding efforts by the Iowa Department of Transportation (DOT), law enforcement agencies, Iowa State University, and several other entities to create a locationally-referenced highway accident database for Iowa. Most notable of these efforts is the Iowa DOT’s development of a PC-based accident location and analysis system (PC-ALAS), a system that has been well received by users since it was introduced in 1989. With its pull-down menu structure, PC-ALAS is more portable and user-friendly than its mainframe predecessor. Users can obtain accident statistics for locations during specified time periods. Searches may be refined to identify accidents of specific types or involving drivers with certain characteristics. Output can be viewed on a computer screen, sent to a file, or printed using pre-defined formats.

Benchmarking project of the Department of Electrical Engineering of Lappeenranta University of Technology

Lappeenrannan teknillisen korkeakoulun sähkötekniikan osasto muutti 1.8.2005 sähkötekniikan tutkinnon kaksiportaiseksi ja vastaamaan näin Bologna-prosessia ja Suomen yliopistolainsäädäntöä. Tutkinnonuudistuksen myötä osasto haluaa varmistaa sähkötekniikan tutkintojen laadun ja vertailtavuuden sekä parantaa opiskelijoidensekä henkilökunnan liikkuvuutta. Tutkintojen laatu ja vertailtavuus osoitetaan sähkötekniikan osaston benchmark-projektilla, jossa kerätään tietoja maisteri- ja tohtorintutkintoa tarjoavista eurooppalaisista yliopistoista. Diplomityö käsittää BM-projektin kolmannen vaiheen suunnittelun ja toteutuksen sisältäen teoriaa benchmark-projekteille tyypillisistä toimintatavoista. Hyväksi havaitut menetelmiä, kuten kyselyt ja matriisit, on tässä työssä otettu soveltuvin osin sähkötekniikan osaston BM-projektin työkaluiksi. Diplomityössä analysoidaan työkalujen avulla BM-kumppaneilta kerättyjä tietoja sekä esitetään ratkaisuja, miten sähkötekniikan osastolla voidaan jatkaa parhaiden toimintatapojen löytämistä.

Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.