Farm machinery operation : 14 selected cooperatives /

Mode of access: Internet.

Machinery manufacturing cost accounting.

Mode of access: Internet.

Agricultural machinery and equipment (in developing countries and eastern Europe)

Mode of access: Internet.

Pathways utilized by heavy metal pollutants in urban stormwater runoff

The research concerned the assessment of the pathways utilized by heavy metal pollutants in urban stormwater runoff. A separately sewered urban residential catchment of approximately 107 hectares in Chelmsley Wood, north-east Birmingham was the subject of the field investigation. The catchment area, almost entirely residential, had no immediate industrial heavy metal input, however, industry was situated to the north of the catchment. The perimeter of the catchment was bounded by the M6 motorway on the northern and eastern sides and was believed to contribute to aerial deposition. Metal inputs to the ground surface were assumed to be confined to normal suburban activities, namely, aerial deposition, vehicular activity and anthropological activities. A programme of field work was undertaken over a 12 month period, from July 1983 to July 1984. Monthly deposition rates were monitored using a network of deposit cannisters and roadside sediment and soil samples were taken. Stormwater samples were obtained for 19 separate events. All samples were analysed for iron, lead, zinc, copper, chromium, nickel and cadmium content. Rainfall was recorded on site with additional meteorological data obtained from local Meteorological Offices. Use was made of a simple conceptual model designed for the catchment to substantiate hypotheses derived from site investigations and literature, to investigate the pathways utilized for the transportation of heavy metals throughout the catchment.

Mapping the regulatory environment : implications for construction firms

As regulators, governments are often criticised for over‐regulating industries. This research project seeks to examine the regulation affecting the construction industry in a federal system of government. It uses a case study of the Australian system of government to focus on the question of the implications of regulation in the construction industry. Having established the extent of the regulatory environment, the research project considers the costs associated with this environment. Consequently, ways in which the regulatory burden on industry can be reduced are evaluated. The Construction Industry Business Environment project is working with industry and government agencies to improve regulatory harmonisation in Australia, and thereby reduce the regulatory burden on industry. It is found that while taxation and compliance costs are not likely to be reduced in the short term, costs arising from having to adapt to variation between regulatory regimes in a federal system of government, seem the most promising way of reducing regulatory costs. Identifying and reducing adaptive costs across jurisdictional are argued to present a novel approach to regulatory reform.

The business of fashion : entrepreneurship and enterprise learning for the new ‘creative’ global marketplace – the Australian case study [Abstract]

While the fashion industry is normally first to recognise trends and embrace creativity, fashion designers are sometimes the last to acknowledge that business acumen and entrepreneurial skills are needed. However, fashion designers and entrepreneurs are now all members of the new ‘creative’ global marketplace with its inherent need to sell globally and be competitive with international brands. For the Australian industry, this tension creates enormous pressures due to Australia’s small population (and market/s), the decreasing textile and manufacturing base, the increase of ‘creative’ micro businesses and with this the increasing number of young Australians wanting to start their own fashion business. This paper highlights the current size of the Australian fashion industry, the trend for small business models, the ‘career portfolio’ entrepreneur and strategies Australian universities are undertaking to address students wishing to enter the business of fashion. It also identifies case studies where enterprise learning pedagogy has been successfully implemented into the business education of an Australian fashion program and concludes with recommendations for an enterprise pedagogy that creates authentic learning, while working with industry and community stakeholders in flexible university formats.

Bouncing Back : Recovery through Design + Making

Architectural education is beginning to recognise the potential of a more intensive relationship between the tasks of designing and building (Erdman et al., 2002) within a work integrated learning environment. The Bouncing Back Project, began after the Queensland, Australia floods in January 2011, and has organically grown through a number of architectural student exhibitions, initially displaying flood responsive designs. In September 2011, 10 Queensland University of Technology architecture students travelled to Sydney to work together in helping to construct a shelter in the Emergency Shelter Exhibition, at Customs House in Circular Quay. The construction and making of the shelter, was filmed. This film documents the student experience, of making, working with industry professionals, community engagement and it reveals how this activity promotes informal work integrated learning in a real world context.

Eva Stroh Family Collection 1860-2005 Bulk: 1912-1950

The Eva Stroh Family Collection provides material on the lives and family history of members of the Sondheimer and Stroh families. The collection consists of numerous photos and several photo albums, family trees, official documents, correspondence, published articles and clippings and some notes, a notebook documenting cultural activities and some daily calendars.

γ-Y2Si2O7, a machinable silicate ceramic: Mechanical properties and machinability

In this paper, the mechanical properties of bulk single-phase γ-Y2Si2O7 ceramic are reported. γ-Y2Si2O7 exhibits low shear modulus, excellent damage tolerance, and thus has a good machinability ready for metal working tools. To understand the underlying mechanism of machinability, drilling test, Hertzian contact test, and density functional theory (DFT) calculation are employed. Hertzian contact test demonstrates that γ-Y2Si2O7 is a "quasi-plastic" ceramic and the intrinsically weak interfaces contribute to its machinability. Crystal structure characteristics and DFT calculations of γ-Y2Si2O7 suggest that some weakly bonded planes, which involve Y-O bonds that can be easily broken, are the sources of the low shear deformation resistance and good machinability.

Microscopic Frictional Response of Sodium Oleate Self-Assembled on Steel

The article peruses the frictional response of an important metal working lubricant additive, sodium oleate. Frictional force microscopy is used to track the response of molecules self-assembled on a steel substrate of 3–4 nm roughness at 0% relative humidity. The friction-normal load characteristic emerges as bell-shaped, where the peak friction and normal load at peak friction are both sensitive to substrate roughness. The frictional response at loads lower than that associated with the peak friction is path reversible while at higher loads the loading and unloading paths are different. We suggest that a new low-friction interface material is created when the normal loads are high.

Hiippakunta diakoniatyön tekijänä ja tukijana : Diakoniatyön kehitys Mikkelin hiippakunnassa 1945-1991

ABSTRACT The diocese as the agent and advocate of diaconial work. The development of diaconial work in the Mikkeli diocese 1945–1991. The roots of Finnish diacony are in the individual devotional life of Pietism. An acting faith had to be evident in acts of love. Following German institutional diacony, diaconial institutions were established in Finland until congregational diacony emerged alongside these institutions in the 1890s. Pastor Otto Aarnisalo acted as a pathfinder in this. He aimed to unite diacony with the Church and the life of the congregation. Diacony had been based on the idea of volunteering to separate it from statutory social work. In 1944 the church law was amended, which made diacony the concern of every member of the congregation. In the years immediately following the Second World War, discussion took place in the Church of Finland about the direction that diacony should take. In the consequential debate, caritative services overcame social diacony. The diocese administration moved to Mikkeli in 1945, when the majority of the Vyborg diocese became part of the USSR in the armistice negotiations. The Mikkeli diocese acted in its diaconial work with the same objectives as the diaconial solutions of the whole church. The acting principle of the diocese diacony became a form of helping which emphasised assistance of the individual. Especially from the 1960s onwards, the country's industrialisation and the reduction of agricultural trade had an effect on the Mikkeli diocese. The diocese administration, specifically Bishop Martti Simojoki and his successor Osmo Alaja, aimed to open up connections to the political left and people working in industry. At least indirectly this helped the diaconial work in industrial localities. In the Mikkeli diocese, a diaconial committee was established in 1971, and its work was overseen by the diocesan chapter of the bishop's office. This enabled the work of the diocese to be organised for the different areas of diacony. Previously, the diaconial work of the Finnish church had primarily been in nursing. The Health Insurance Law of 1972 brought a change to this when the responsibility for health services was transferred to the municipalities. Diacony began to move towards a psychological and spiritual emphasis. Beginning in the 1970s, the diocese started holding diaconial themed days at prescribed intervals. Although these did not result in great realignments, they did help clarify the direction that diacony would take. Large international collections were also carried out, especially in the 1980s. At the same time, socio-ethical activity vitalised and diversified Christian services. The idea that every member of the congregation should practice diacony was a strong factor in the Mikkeli diocese as well. The diocese's vision for diacony was holistic; Christian service was the responsibility of every member of the congregation. During the period of study (1945–1991), the theology of diacony was rather tenuous. Bishop Kalevi Toiviainen, however, brought forth the viewpoint of church doctrine and officially sanctioned theology. Diacony was part of the complete faith of the Church.

Adiabatic shear localization: occurrence, theories, and applications

Influencia de la internacionalización en el desempeño social de las empresas

[ES] Recientemente estudios previos han comenzado a plantear la posible relación entre el fenómeno de la internacionalización y responsabilidad social corporativa de las organizaciones. En este trabajo analizamos en qué medida la internacionalización contribuye a una mejora sustancial del desempeño social de las empresas. Usando una muestra de 102 empresas estadounidenses de los sectores químico, energético y de maquinaria industrial, nuestros resultados muestran que no todas las dimensiones de la internacionalización permiten a las empresas adquirir conocimiento valioso que conduzca a una mejora de su desempeño social. Concretamente, comprobamos que, mientras el porcentaje de ventas en mercados extranjeros y la diversificación internacional cultural favorecen la puesta en marcha de prácticas de responsabilidad social corporativa avanzadas que redundan en un mejor desempeño social (cumpliendo con las demandas sociales de los grupos de interés de los distintos mercados donde operan), la diversificación internacional geográfica no tiene efecto directo en el desempeño social de las empresas. Por tanto, no es tan importante el número de mercados donde la empresa actúa, sino el grado de diferenciación cultural existente entre los mismos lo que hace que la propia empresa mejore su desempeño social. El presente trabajo incluye implicaciones relevantes para el mundo académico, directivos y reguladores públicos.

Les techniques du dinandier: formes et fonction des outils lithiques spécifiques à la déformation plastique des métaux

In recent years, the proliferation of discoveries has enabled studies of stone tools used in metal working to develop. The increasing number of tools, made mostly from Neolithic polished axes, reveals a typological and functional diversity that remained largely unsuspected. This diversity is an opportunity to understand the tools and address the technical issues relating to the plastic deformation of metals. The operations that are represented here demonstrate the techniques used by coppersmiths with specialised tools.

Fatores influenciadores da gestão da qualidade e independência do auditor: um estudo de caso

Dissertação apresentada ao Instituto Superior de Contabilidade para obtenção do Grau de Mestre em Auditoria Orientada por: Doutora Alcina Dias