Um modelo cognitivo baseado na atenção para consciência em robôs inteligentes

Understanding consciousness is one of the most fascinating challenges of our time. From ancient civilizations to modern philosophers, questions have been asked on how one is conscious of his/her own existence and about the world that surrounds him/her. Although there is no precise definition for consciousness, there is an agreement that it is strongly related to human cognitive processes such as: thinking, reasoning, emotions, wishes. One of the key processes to the arising of the consciousness is the attention, a process capable of promoting a selection of a few stimuli from a huge amount of information that reaches us constantly. Machine consciousness is the field of the artificial intelligence that investigate the possibility of the production of conscious processes in artificial devices. This work presents a review about the theme of consciousness - in both natural and artificial aspects -, discussing this theme from the philosophical and computational perspectives, and investigates the feasibility of the adoption of an attentional schema as the base to the cognitive processing. A formal computational model is proposed for conscious agents that integrates: short and long term memories, reasoning, planning, emotion, decision making, learning, motivation and volition. Computer experiments in a mobile robotics domain under USARSim simulation environment, proposed by RoboCup, suggest that the agent can be able to use these elements to acquire experiences based on environment stimuli. The adoption of the cognitive architecture over the attentional model has potential to allow the emergence of behaviours usually associated to the consciousness in the simulated mobile robots. Further implementation under this model could potentially allow the agent to express sentience, selfawareness, self-consciousness, autonoetic consciousness, mineness and perspectivalness. By performing computation over an attentional space, the model also allows the ...

In-Flight Collision Avoidance Controller Based Only on OS4 Embedded Sensors

The major goal of this research was the development and implementation of a control system able to avoid collisions during the flight for a mini-quadrotor helicopter, based only on its embedded sensors without changing the environment. However, it is important to highlight that the design aspects must be seriously considered in order to overcome hardware limitations and achieve control simplification. The controllers of a UAV (Unmanned Aerial Vehicle) robot deal with highly unstable dynamics and strong axes coupling. Furthermore, any additional embedded sensor increases the robot total weight and therefore, decreases its operating time. The best balance between embedded electronics and robot operating time is desired. This paper focuses not only on the development and implementation of a collision avoidance controller for a mini-robotic helicopter using only its embedded sensors, but also on the mathematical model that was essential for the controller developing phases. Based on this model we carried out the development of a simulation tool based on MatLab/Simulink that was fundamental for setting the controllers' parameters. This tool allowed us to simulate and improve the OS4 controllers in different modeled environments and test different approaches. After that, the controllers were embedded in the real robot and the results proved to be very robust and feasible. In addition to this, the controller has the advantage of being compatible with future path planners that we are developing.

Un'analisi dell'impatto dell'informatica sul mercato del lavoro

In questa analisi si cercherà di comprendere cosa caratterizza questa l'ondata di progresso tecnologico che sta cambiando il mercato del lavoro. Il principale aspetto negativo di questo progresso si chiama "Technological Unemployment". Benché gli esperti si trovino in disaccordo su quali siano le cause della persistente alta disoccupazione, Brynjolfsson e McAfee puntano il dito contro l'automazione che ha soppiantato i lavori ripetitivi delle aziende. Tuttavia, è anche vero che il progresso ha sempre portato aumenti di produttività, e soprattutto nuovi tipi di occupazioni che hanno compensato la perdita di posti di lavoro, nel medio-lungo termine. Keynes evidenzia che la disoccupazione dovuta alla scoperta di strumenti economizzatori di manodopera procede con ritmo più rapido di quello con cui riusciamo a trovare nuovi impieghi per la manodopera stessa. Da ciò si crea ansia per il futuro, più o meno motivata. Gli stessi esperti sono spaccati a metà tra chi ha fiducia nei possibili risvolti positivi del progresso e chi invece teme possa comportare scenari catastrofici. Le macchine ci rubano lavoro o ci liberano da esso? Con questa ricerca ci si pone l'obiettivo di analizzare le effettive prospettive dei prossimi decenni. Nel capitolo 2 che è il corpo della tesi prenderemo soprattutto in conto il lavoro accademico di Frey ed Osborne dell'Oxford Martin School, intitolato "The future of employment: how susceptible are jobs to computerisation?" (2013). Essi sono stati tra i primi a studiare e quantificare cosa comporteranno le nuove tecnologie in termini di impiego. Il loro obiettivo era individuare le occupazioni a rischio, da qui a vent'anni, nel mercato del lavoro degli Stati Uniti e la relazione che intercorre tra la loro probabilità di essere computerizzati e i loro salari e livello d'istruzione medi, il tutto valutato attraverso l'ausilio di una nuova metodologia che si vedrà nel dettaglio. A conclusioni simili alle loro, per certi aspetti, è successivamente giunto anche Autor; tra l'altro viene spesso citato per altre sue opere dagli stessi Frey e Osborne, che usano le sue categorizzazioni per impostare la struttura del loro calcolo dell'automatizzabilità dei lavori utilizzando i recenti miglioramenti nelle scienze ingegneristiche quali ML (Machine Learning ad esempio Data mining, Machine vision, Computational statistics o più in generale AI) e MR (Mobile robotics) come strumenti di valutazione. Oltre alle sue ricerche, si presenteranno brevemente i risultati di un recente sondaggio tenuto dal Pew Research Center in cui importanti figure dell'informatica e dell'economia esprimono il loro giudizio sul futuro panorama del mondo del lavoro, considerando l'imminente ondata di innovazioni tecnologiche. La tesi si conclude con un'elaborazione personale. In questo modo si prenderà coscienza dei problemi concreti che il progresso tecnologico potrebbe procurare, ma anche dei suoi aspetti positivi.

What is the optimal stitching orientation from an aerial survey perspective?

Mosaicing is a technique that allows obtaining a large high resolution image by stitching several images together. These base images are usually acquired from an elevated point of view. Until recently, low-altitude image acquisition has been performed typically by using using airplanes, as well as other manned platforms. However, mini unmanned aerial vehicles (MUAV) endowed with a camera have lately made this task more available for small for cicil applications, for example for small farmers in order to obtain accurate agronomic information about their crop fields. The stitching orientation, or the image acquisition orientation usually coincides with the aircraft heading assuming a downwards orientation of the camera. In this paper, the efect of the image orientation in the eficiency of the aerial coverage path planning is studied. Moreover, an algorithm to compute an optimal stitching orientation angle is proposed and results are numerically compared with classical approaches.

Evaluación experimental del dispositivo LRF HOKUYO URG-04LX-UG01

En robótica móvil existen diferentes dispositivos que permiten percibir la configuración del entorno. Pueden utilizarse alternativas de gran alcance como por ejemplo los ultrasonidos, pero que tienen la desventaja de consumir un tiempo elevado en la realización de las medidas. En corta distancia destacan los sensores basados en la emisión de luz infrarroja, que responden a muy alta velocidad pero tienen muy poco alcance. La obtención de fotografia, en incluso video, por medio de camaras, permite obtener mucha información del entorno, pero exige un procesado normalmente muy elaborado. Los “Laser Range Finder” son dispositivos basados en la emisión de un haz laser que responden a muy alta velocidad en el entorno de unos cuantos metros alrededor del robot móvil, lo que los hacen especialmente adecuados para un uso continuo que permita obtener de forma rapida un mapa de los obstaculos mas próximos. En el presente proyecto se va a realizar un ejercicio de medida con el laser range finder URG-04LX-UG01 para confirmar su utilidad en el ambito de la robótica móvil. ABSTRACT In mobile robotics there are different devices that allow sense the environment configuration. Powerful alternatives may be used as e.g. ultrasounds, but they have the disadvantage of consuming a large time to perform measurements. In short range highlights the infrared light based sensors, that responds at very high speed but have very low range. The photography obtaining, even video, by cameras, allow acquire many environmental information but normally require a very elaborate processing. The Laser Range Finder are devices based on laser beam broadcasting that respond a very high speed in the vicinity of a few meters around the mobile robot, which make them especially suitable for the continuous use, that allows fast obtain of the nearests obstacles map. In this project we are going to do an measurement exercise with laser range finder URG-04LX-UG01 to confirm its utility in mobile robotics scope.

Diseño e implementación de un controlador de velocidad PID multivariable para un robot con configuración de triciclo

La robótica móvil constituye un área de desarrollo y explotación de interés creciente. Existen ejemplos de robótica móvil de relevancia destacada en el ámbito industrial y se estima un fuerte crecimiento en el terreno de la robótica de servicios. En la arquitectura software de todos los robots móviles suelen aparecer con frecuencia componentes que tienen asignadas competencias de gobierno, navegación, percepción, etcétera, todos ellos de importancia destacada. Sin embargo, existe un elemento, difícilmente prescindible en este tipo de robots, el cual se encarga del control de velocidad del dispositivo en sus desplazamientos. En el presente proyecto se propone desarrollar un controlador PID basado en el modelo y otro no basado en el modelo. Dichos controladores deberán operar en un robot con configuración de triciclo disponible en el Departamento de Sistemas Informáticos y deberán por tanto ser programados en lenguaje C para ejecutar en el procesador digital de señal destinado para esa actividad en el mencionado robot (dsPIC33FJ128MC802). ABSTRACT Mobile robotics constitutes an area of development and exploitation of increasing interest. There are examples of mobile robotics of outstanding importance in industry and strong growth is expected in the field of service robotics. In the software architecture of all mobile robots usually appear components which have assigned competences of government, navigation, perceptionetc., all of them of major importance. However, there is an essential element in this type of robots, which takes care of the speed control. The present project aims to develop a model-based and other non-model-based PID controller. These controllers must operate in a robot with tricycle settings, available from the Department of Computing Systems, and should therefore be programmed in C language to run on the digital signal processor dedicated to that activity in the robot (dsPIC33FJ128MC802).

3D model based map building

Comunicación presentada en el IX Workshop de Agentes Físicos (WAF'2008), Vigo, 11-12 septiembre 2008.

Comparativa de detectores de características visuales y su aplicación al SLAM

Comunicación presentada en el X Workshop of Physical Agents, Cáceres, 10-11 septiembre 2009.

Large scale SLAM with visual features

Comunicación presentada en el X Workshop of Physical Agents, Cáceres, 10-11 septiembre 2009.

A robust and fast method for 6DoF motion estimation from generalized 3D data

Nowadays, there is an increasing number of robotic applications that need to act in real three-dimensional (3D) scenarios. In this paper we present a new mobile robotics orientated 3D registration method that improves previous Iterative Closest Points based solutions both in speed and accuracy. As an initial step, we perform a low cost computational method to obtain descriptions for 3D scenes planar surfaces. Then, from these descriptions we apply a force system in order to compute accurately and efficiently a six degrees of freedom egomotion. We describe the basis of our approach and demonstrate its validity with several experiments using different kinds of 3D sensors and different 3D real environments.

Combining visual features and Growing Neural Gas networks for robotic 3D SLAM

The use of 3D data in mobile robotics provides valuable information about the robot’s environment. Traditionally, stereo cameras have been used as a low-cost 3D sensor. However, the lack of precision and texture for some surfaces suggests that the use of other 3D sensors could be more suitable. In this work, we examine the use of two sensors: an infrared SR4000 and a Kinect camera. We use a combination of 3D data obtained by these cameras, along with features obtained from 2D images acquired from these cameras, using a Growing Neural Gas (GNG) network applied to the 3D data. The goal is to obtain a robust egomotion technique. The GNG network is used to reduce the camera error. To calculate the egomotion, we test two methods for 3D registration. One is based on an iterative closest points algorithm, and the other employs random sample consensus. Finally, a simultaneous localization and mapping method is applied to the complete sequence to reduce the global error. The error from each sensor and the mapping results from the proposed method are examined.

Geometric 3D point cloud compression

The use of 3D data in mobile robotics applications provides valuable information about the robot’s environment but usually the huge amount of 3D information is unmanageable by the robot storage and computing capabilities. A data compression is necessary to store and manage this information but preserving as much information as possible. In this paper, we propose a 3D lossy compression system based on plane extraction which represent the points of each scene plane as a Delaunay triangulation and a set of points/area information. The compression system can be customized to achieve different data compression or accuracy ratios. It also supports a color segmentation stage to preserve original scene color information and provides a realistic scene reconstruction. The design of the method provides a fast scene reconstruction useful for further visualization or processing tasks.

3D Maps Representation Using GNG

Current RGB-D sensors provide a big amount of valuable information for mobile robotics tasks like 3D map reconstruction, but the storage and processing of the incremental data provided by the different sensors through time quickly become unmanageable. In this work, we focus on 3D maps representation and propose the use of the Growing Neural Gas (GNG) network as a model to represent 3D input data. GNG method is able to represent the input data with a desired amount of neurons or resolution while preserving the topology of the input space. Experiments show how GNG method yields a better input space adaptation than other state-of-the-art 3D map representation methods.

3DCOMET: 3D compression methods test dataset

The use of 3D data in mobile robotics applications provides valuable information about the robot’s environment. However usually the huge amount of 3D information is difficult to manage due to the fact that the robot storage system and computing capabilities are insufficient. Therefore, a data compression method is necessary to store and process this information while preserving as much information as possible. A few methods have been proposed to compress 3D information. Nevertheless, there does not exist a consistent public benchmark for comparing the results (compression level, distance reconstructed error, etc.) obtained with different methods. In this paper, we propose a dataset composed of a set of 3D point clouds with different structure and texture variability to evaluate the results obtained from 3D data compression methods. We also provide useful tools for comparing compression methods, using as a baseline the results obtained by existing relevant compression methods.

Representation and learning of visual information for pose recognition

Recovering position from sensor information is an important problem in mobile robotics, known as localisation. Localisation requires a map or some other description of the environment to provide the robot with a context to interpret sensor data. The mobile robot system under discussion is using an artificial neural representation of position. Building a geometrical map of the environment with a single camera and artificial neural networks is difficult. Instead it would be simpler to learn position as a function of the visual input. Usually when learning images, an intermediate representation is employed. An appropriate starting point for biologically plausible image representation is the complex cells of the visual cortex, which have invariance properties that appear useful for localisation. The effectiveness for localisation of two different complex cell models are evaluated. Finally the ability of a simple neural network with single shot learning to recognise these representations and localise a robot is examined.