Chromatographic techniques for the determination of free phenol in foundry resins

Phenol is a toxic compound present in a wide variety of foundry resins. Its quantification is important for the characterization of the resins as well as for the evaluation of free contaminants present in foundry wastes. Two chromatographic methods, liquid chromatography with ultraviolet detection (LC-UV) and gas chromatography with flame ionization detection (GC-FID), for the analysis of free phenol in several foundry resins, after a simple extraction procedure (30 min), were developed. Both chromatographic methods were suitable for the determination of phenol in the studied furanic and phenolic resins, showing good selectivity, accuracy (recovery 99–100%; relative deviations <5%), and precision (coefficients of variation <6%). The used ASTM reference method was only found to be useful in the analysis of phenolic resins, while the LC and GC methods were applicable for all the studied resins. The developed methods reduce the time of analysis from 3.5 hours to about 30 min and can readily be used in routine quality control laboratories.

Use of solvent extraction to remediate soils contaminated with hydrocarbons

The main objective of this research is to exploit the possibility of using an ex situ solvent extraction technique for the remediation of soils contaminated with semi-volatile petroleum hydrocarbons. The composition of the organic phase was chosen in order to form a single phase mixture with an aqueous phase and simultaneously not being disturbed (forming stable emulsions) by the soil particles hauling the contaminants. It should also permit a regeneration of the organic solvent phase. As first, we studied the miscibility domain of the chosen ternary systems constituted by ethyl acetate–acetone–water. This system proved to satisfy the previous requirements allowing for the formation of a single liquid phase mixture within a large spectrum of compositions, and also allowing for an intimate contact with the soil. Contaminants in the diesel range within different functional groups were selected: xylene, naphthalene and hexadecane. The analytical control was done by gas chromatography with FID detector. The kinetics of the extractions proved to be fast, leading to equilibrium after 10 min. The effect of the solid–liquid ratio on the extraction efficiency was studied. Lower S/L ratios (1:8, w/v) proved to be more efficient, reaching recoveries in the order of 95%. The option of extraction in multiple contacts did not improve the recovery in relation to a single contact. The solvent can be regenerated by distillation with a loss around 10%. The contaminants are not evaporated and they remain in the non-volatile phase. The global results show that the ex situ solvent extraction is technically a feasible option for the remediation of semi-volatile aromatic, polyaromatic and linear hydrocarbons.

Validation of a single-extraction procedure for sequential analysis of vitamin E, cholesterol, fatty acids, and total fat in seafood

Food lipid major components are usually analyzed by individual methodologies using diverse extractive procedures for each class. A simple and fast extractive procedure was devised for the sequential analysis of vitamin E, cholesterol, fatty acids, and total fat estimation in seafood, reducing analyses time and organic solvent consumption. Several liquid/liquid-based extractive methodologies using chlorinated and non-chlorinated organic solvents were tested. The extract obtained is used for vitamin E quantification (normal-phase HPLC with fluorescence detection), total cholesterol (normal-phase HPLC with UV detection), fatty acid profile, and total fat estimation (GC-FID), all accomplished in <40 min. The final methodology presents an adequate linearity range and sensitivity for tocopherol and cholesterol, with intra- and inter-day precisions (RSD) from 3 to 11 % for all the components. The developed methodology was applied to diverse seafood samples with positive outcomes, making it a very attractive technique for routine analyses in standard equipped laboratories in the food quality control field.

Aliphatic bio-oils from corks: a Py-Gc/MS study

Cork samples from Betula pendula, Quercus suber and Quercus cerris were submitted to Py-GC-MS/FID at temperatures between 550 degrees C and 900 degrees C and the pyrolysis-derived compounds (py-products) were identified and quantified. Corks were compared with wood samples. Py-products include suberin, lignin and carbohydrates derivatives. Suberin py-products are dominated by unsaturated aliphatics. Corks pyrolysis yield and composition were dramatically influenced by temperature in contrast to wood that showed stable results across temperatures. At 850-900 degrees C the peaks area of cork pyrograms were approximately two times higher than at 550 degrees C, for which yield was about half of the woods, and cork py-products were dominated by suberin-derived short chain aliphatics, namely 1-alkenes, while at 550 degrees C composition was dominated by lignin derivatives. Lignin and carbohydrate derived products decreased dramatically over 750 degrees C while the opposite was observed for unsaturated aliphatics. Cork materials show a high potential as feedstock for production of aliphatic-rich pyrolytic biofuels or as a source of olefins. (C) 2014 Elsevier B.V. All rights reserved.

Characterization of the volatile fraction emitted by phloems of four pinus species by solid-phase microextraction and gas chromatography–mass spectrometry

Pine forests constitute some of the most important renewable resources supplying timber, paper and chemical industries, among other functions. Characterization of the volatiles emitted by different Pinus species has proven to be an important tool to decode the process of host tree selection by herbivore insects, some of which cause serious economic damage to pines. Variations in the relative composition of the bouquet of semiochemicals are responsible for the outcome of different biological processes, such as mate finding, egg-laying site recognition and host selection. The volatiles present in phloem samples of four pine species, P. halepensis, P. sylvestris, P. pinaster and P. pinea, were identified and characterized with the aim of finding possible host-plant attractants for native pests, such as the bark beetle Tomicus piniperda. The volatile compounds emitted by phloem samples of pines were extracted by headspace solid-phase micro extraction, using a 2 cm 50/30 mm divinylbenzene/carboxen/polydimethylsiloxane table flex solid-phase microextraction fiber and its contents analyzed by high-resolution gas chromatography, using flame ionization and a non polar and chiral column phases. The components of the volatile fraction emitted by the phloem samples were identified by mass spectrometry using time-of-flight and quadrupole mass analyzers. The estimated relative composition was used to perform a discriminant analysis among pine species, by means of cluster and principal component analysis. It can be concluded that it is possible to discriminate pine species based on the monoterpenes emissions of phloem samples.

Biomass production of four Cynara cardunculus clones and lignin composition analysis

Four Cynara cardunculus clones, two from Portugal and two from Spain were studied for biomass production and their lignin was characterized. The clones differed in biomass partitioning: Spanish clones produced more capitula (54.5% vs. 43.9%), and Portuguese clones more stalks (37.2% vs. 25.6%). The heating values (HHV0) of the stalks were similar, ranging from 17.1 to 18.4 MJ/kg. Lignin was studied by analytical pyrolysis (Py-GC/MS(FID)), separately in depithed stalks (stalksDP) and pith. StalksDP had in average higher relative proportions of lignin derived compounds than pith (23.9% vs. 21.8%) with slightly different lignin monomeric composition: pith samples were richer in syringyl units as compared to stalksDP (64% vs. 53%), with S/G ratios of 2.1 and 1.3, respectively. The H:G:S composition was 7:40:53 in stalksDP and 7:29:64 in pith. The lignin content ranged from 18.8% to 25.5%, enabling a differentiation between clones and provenances. © 2015 Elsevier Ltd. All rights reserved.

Hidrogenação de óleo vegetal de colza para a produção de biocombustível líquido

Dissertação apresentada à Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia para a obtenção do grau de Mestre em Energia e Bioenergia

Estudo da influência do teor em água e do contéudo em minerais de argila na distribuição do benzeno pelas diferentes fases de solos graníticos

O principal objectivo de desenvolvimento desta tese é a análise da adsorção de benzeno em solos residuais graníticos. A contaminação dos solos por combustíveis derivados do petróleo é uma problemática bastante actual, sendo que a remediação dos solos contaminados necessita de um vasto conjunto de conhecimentos relativos ao comportamento dos solos e dos contaminantes. Uma das grandes questões que se levanta é a incerteza sobre o efeito das características mineralógicas do solo na distribuição e na disponibilidade dos contaminantes o que condiciona a eficiência da remediação dos solos e dificulta a escolha da tecnologia de remediação mais adequada. Nesta tese a contaminação do solo por benzeno foi realizada com diferentes níveis de contaminação e em seguida, foi determinada a concentração na fase gasosa. Definiram-se níveis de contaminação entre 0,5 mg e 439 mg de benzeno por quilograma de solo húmido, sendo que o intervalo entre cada adição foi determinado pela condição de equilíbrio, ou seja, quando a concentração de benzeno na fase gasosa se mantivesse aproximadamente constante em dois dias consecutivos de modo a analisar a distribuição do benzeno pelas diferentes fases do solo. Para tal foram construídas isotérmicas de adsorção, com posterior ajuste de modelos matemáticos, sendo utilizados os modelos de Langmuir, Freundlich e Polinomial de 3º Grau A preparação do solo residual granítico foi realizada previamente. Numa primeira fase os solos foram peneirados e secos de modo a obter uma granulometria controlada e um teor em água semelhante e aproximadamente nulo. De seguida, cada amostra foi preparada de acordo com dois objectivos: os ensaios destinados ao estudo da influência do teor em água apresentassem o mesmo solo com diferentes teores em água e que os ensaios destinados ao estudo da influência dos minerais de argila apresentassem composições mineralógicas diferentes para o mesmo teor em água, substituindo parte da fracção argilosa por quartzo. A quantificação das concentrações de benzeno na fase gasosa, realizou-se por cromatografia GC-FID, sendo que foram obtidas as áreas do pico dos cromatogramas, para posterior transformação em concentrações aplicando a curva de calibração. Posteriormente foram calculadas as concentrações de benzeno nas restantes fases dos solos, de modo a analisar a distribuição do benzeno nas diferentes fases.

Hidrotratamento de óleo de bagaço de azeitona bruto na produção de biocombustíveis líquidos

Dissertação apresentada à Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, para a obtenção do grau de Mestre em Energia e Bioenergia

Pirólise de resíduos de desmantelamento de veículos - produção de combustíveis líquidos

Dissertação para obtenção do Grau de Mestre em Energia e Bioenergia

Produção de biocombustíveis líquidos por pirólise seguida de hidrogenação de misturas de óleos vegetais num conceito de bio-refinaria

Dissertação apresentada à Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, para obtenção do Grau de Mestre em Energia e Bioenergia

Pirólise de óleos vegetais de elevada acidez

Dissertação apresentada à Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, para obtenção do Grau de Mestre em Energia e Bioenergia

Potencial de plantas estuarinas na remediação de produtos farmacêuticos e de cuidado pessoal

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, Perfil de Engenharia de Sistemas Ambientais

G-quadruplex ligands for cancer therapy

DNA may fold into a diversity of structures and topologies such as duplexes and triplexes. Some specific guanine-rich DNA sequences may even fold into a higher order structures denominated guanine G-quadruplexes (G4). These G-quadruplex forming sequences have shown biological interest since were found in telomeres and in promoter region of oncogenes. Thus, these G4 forming sequences have been explored as therapeutic targets for cancer therapy, since G4 formation was demonstrated to inhibit RNA-polymerase and telomerase activity. However, the G4 structures are transient and are only formed under specific conditions. Hence the main objective of this work is to develop new G4-specific ligands which may potentially find applications in the therapeutic area. Several potential G4-binding ligands were synthesized and characterized. The synthesis of these compounds consisted on a procedure based on van Leusen chemistry and a cross-coupling reaction through C-H activation, affording phenanthroline compounds (Phen-1, 50%; Phen-2, 20%), phenyl (Iso-1, 61%; Iso-2, 21%; Ter-1, 85%; Ter-2, 35%), and quinolyl (Quin-1, 85%; Quin-2, 45%) compounds. Screening assays for selecting the potential G4 compounds were performed by FRET-melting, G4-FID, CD-melting and DSF. Qualitative biophysical studies were performed by fluorescence and CD spectroscopy. Two high-specific G-quadruplex ligands, Phen-1 and Phen-2, were found to effectively bind telomeric and c-myc G4 structures. Phen-1 was found to stabilize parallel telomeric 22AG and c-myc sequence by 4.1 and 4.3 ˚C, respectively. Phen-2 also displayed high affinity towards 22AG (

Chemical composition of the essential oils from two subspecies of Protium heptaphyllum

Qualitative and quantitative analyses of the volatile constituents from resin of Protium heptaphyllum (Aubl.) Marchand subsp. ulei (Swat) Daly (PHU), and Protium heptaphyllum (Aubl.) Marchand subsp. heptaphyllum (PHH), Burseraceae were performed using GC-MS and GC-FID. The resins were collected around the city of Cruzeiro do Sul, state of Acre, Brazil. Essential oils from the two subspecies were extracted by hydrodistillation with a yield of 8.6% (PHU) and 11.3% (PHH); the main components were terpinolene (42.31%) and p-cymene (39.93%) for subspecies ulei (PHU) and heptaphyllum (PHH), respectively.